From mboxrd@z Thu Jan  1 00:00:00 1970
From: Stefan Roese <sr@denx.de>
Date: Mon, 25 Aug 2008 13:27:42 +0200
Subject: [U-Boot] Question about FIT images with uboot 1.3.4 (solved)
In-Reply-To: <3efb10970808250347y156804dctaf91b651e2ec193d@mail.gmail.com>
References: <3efb10970808250347y156804dctaf91b651e2ec193d@mail.gmail.com>
Message-ID: <200808251327.42785.sr@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On Monday 25 August 2008, Remy Bohmer wrote:
> Finally I got the problem tracked down. It was very stupid (as always)
> but the reason why FIT-images did not work here, was because the last
> bytes of the image were overwritten by downloading the ram drive
> image. The legacy uImage just fit in the 3MB memory space, and the FIT
> image just did not. (it is quite big, because I use an uncompressed
> kernel)
> So, moving up the ramdrive image to a higher address solved this problem...
> Keeps worth mentioning that the FIT error message (no description
> found) had put me completely in the wrong direction...
>
> For convenience, I also have a kernel patch here that allows the
> kernel to build a FIT image immediately while building the uImage.

Great.

> I will post that on LKML soon.

Please post this here on the U-Boot lists too. LKML is just too hard to track.

Thanks.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================