From mboxrd@z Thu Jan 1 00:00:00 1970 From: akpm@linux-foundation.org Subject: - e1000-fix-stack-size.patch removed from -mm tree Date: Thu, 28 Aug 2008 14:49:21 -0700 Message-ID: <200808282149.m7SLnLN1016181@imap1.linux-foundation.org> Reply-To: linux-kernel@vger.kernel.org Return-path: Received: from smtp1.linux-foundation.org ([140.211.169.13]:39394 "EHLO smtp1.linux-foundation.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756003AbYH1VuR (ORCPT ); Thu, 28 Aug 2008 17:50:17 -0400 Sender: mm-commits-owner@vger.kernel.org List-Id: mm-commits@vger.kernel.org To: torvalds@linux-foundation.org, auke-jan.h.kok@intel.com, emil.s.tantilov@intel.com, jeff@garzik.org, jeffrey.t.kirsher@intel.com, mm-commits@vger.kernel.org The patch titled e1000: fix stack size has been removed from the -mm tree. Its filename was e1000-fix-stack-size.patch This patch was dropped because it was merged into mainline or a subsystem tree The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/ ------------------------------------------------------ Subject: e1000: fix stack size From: Linus Torvalds Shrink the stack from 1152 bytes to 192 bytes (the first version, that only did the e1000_option part, got it down to 600 bytes). About half comes from not using multiple "e1000_option" structures, the other half comes from turning the "e1000_opt_list[]" arrays into "static const" instead, so that gcc doesn't copy them onto the stack. Signed-off-by: Linus Torvalds Reviewed-by: Auke Kok Tested-by: Emil Tantilov Signed-off-by: Jeff Kirsher Cc: Jeff Garzik Signed-off-by: Andrew Morton --- drivers/net/e1000/e1000_param.c | 81 ++++++++++++++++-------------- 1 file changed, 45 insertions(+), 36 deletions(-) diff -puN drivers/net/e1000/e1000_param.c~e1000-fix-stack-size drivers/net/e1000/e1000_param.c --- a/drivers/net/e1000/e1000_param.c~e1000-fix-stack-size +++ a/drivers/net/e1000/e1000_param.c @@ -208,7 +208,7 @@ struct e1000_option { } r; struct { /* list_option info */ int nr; - struct e1000_opt_list { int i; char *str; } *p; + const struct e1000_opt_list { int i; char *str; } *p; } l; } arg; }; @@ -242,7 +242,7 @@ static int __devinit e1000_validate_opti break; case list_option: { int i; - struct e1000_opt_list *ent; + const struct e1000_opt_list *ent; for (i = 0; i < opt->arg.l.nr; i++) { ent = &opt->arg.l.p[i]; @@ -279,7 +279,9 @@ static void e1000_check_copper_options(s void __devinit e1000_check_options(struct e1000_adapter *adapter) { + struct e1000_option opt; int bd = adapter->bd_number; + if (bd >= E1000_MAX_NIC) { DPRINTK(PROBE, NOTICE, "Warning: no configuration for board #%i\n", bd); @@ -287,19 +289,21 @@ void __devinit e1000_check_options(struc } { /* Transmit Descriptor Count */ - struct e1000_option opt = { + struct e1000_tx_ring *tx_ring = adapter->tx_ring; + int i; + e1000_mac_type mac_type = adapter->hw.mac_type; + + opt = (struct e1000_option) { .type = range_option, .name = "Transmit Descriptors", .err = "using default of " __MODULE_STRING(E1000_DEFAULT_TXD), .def = E1000_DEFAULT_TXD, - .arg = { .r = { .min = E1000_MIN_TXD }} + .arg = { .r = { + .min = E1000_MIN_TXD, + .max = mac_type < e1000_82544 ? E1000_MAX_TXD : E1000_MAX_82544_TXD + }} }; - struct e1000_tx_ring *tx_ring = adapter->tx_ring; - int i; - e1000_mac_type mac_type = adapter->hw.mac_type; - opt.arg.r.max = mac_type < e1000_82544 ? - E1000_MAX_TXD : E1000_MAX_82544_TXD; if (num_TxDescriptors > bd) { tx_ring->count = TxDescriptors[bd]; @@ -313,19 +317,21 @@ void __devinit e1000_check_options(struc tx_ring[i].count = tx_ring->count; } { /* Receive Descriptor Count */ - struct e1000_option opt = { + struct e1000_rx_ring *rx_ring = adapter->rx_ring; + int i; + e1000_mac_type mac_type = adapter->hw.mac_type; + + opt = (struct e1000_option) { .type = range_option, .name = "Receive Descriptors", .err = "using default of " __MODULE_STRING(E1000_DEFAULT_RXD), .def = E1000_DEFAULT_RXD, - .arg = { .r = { .min = E1000_MIN_RXD }} + .arg = { .r = { + .min = E1000_MIN_RXD, + .max = mac_type < e1000_82544 ? E1000_MAX_RXD : E1000_MAX_82544_RXD + }} }; - struct e1000_rx_ring *rx_ring = adapter->rx_ring; - int i; - e1000_mac_type mac_type = adapter->hw.mac_type; - opt.arg.r.max = mac_type < e1000_82544 ? E1000_MAX_RXD : - E1000_MAX_82544_RXD; if (num_RxDescriptors > bd) { rx_ring->count = RxDescriptors[bd]; @@ -339,7 +345,7 @@ void __devinit e1000_check_options(struc rx_ring[i].count = rx_ring->count; } { /* Checksum Offload Enable/Disable */ - struct e1000_option opt = { + opt = (struct e1000_option) { .type = enable_option, .name = "Checksum Offload", .err = "defaulting to Enabled", @@ -363,7 +369,7 @@ void __devinit e1000_check_options(struc { E1000_FC_FULL, "Flow Control Enabled" }, { E1000_FC_DEFAULT, "Flow Control Hardware Default" }}; - struct e1000_option opt = { + opt = (struct e1000_option) { .type = list_option, .name = "Flow Control", .err = "reading default settings from EEPROM", @@ -381,7 +387,7 @@ void __devinit e1000_check_options(struc } } { /* Transmit Interrupt Delay */ - struct e1000_option opt = { + opt = (struct e1000_option) { .type = range_option, .name = "Transmit Interrupt Delay", .err = "using default of " __MODULE_STRING(DEFAULT_TIDV), @@ -399,7 +405,7 @@ void __devinit e1000_check_options(struc } } { /* Transmit Absolute Interrupt Delay */ - struct e1000_option opt = { + opt = (struct e1000_option) { .type = range_option, .name = "Transmit Absolute Interrupt Delay", .err = "using default of " __MODULE_STRING(DEFAULT_TADV), @@ -417,7 +423,7 @@ void __devinit e1000_check_options(struc } } { /* Receive Interrupt Delay */ - struct e1000_option opt = { + opt = (struct e1000_option) { .type = range_option, .name = "Receive Interrupt Delay", .err = "using default of " __MODULE_STRING(DEFAULT_RDTR), @@ -435,7 +441,7 @@ void __devinit e1000_check_options(struc } } { /* Receive Absolute Interrupt Delay */ - struct e1000_option opt = { + opt = (struct e1000_option) { .type = range_option, .name = "Receive Absolute Interrupt Delay", .err = "using default of " __MODULE_STRING(DEFAULT_RADV), @@ -453,7 +459,7 @@ void __devinit e1000_check_options(struc } } { /* Interrupt Throttling Rate */ - struct e1000_option opt = { + opt = (struct e1000_option) { .type = range_option, .name = "Interrupt Throttling Rate (ints/sec)", .err = "using default of " __MODULE_STRING(DEFAULT_ITR), @@ -497,7 +503,7 @@ void __devinit e1000_check_options(struc } } { /* Smart Power Down */ - struct e1000_option opt = { + opt = (struct e1000_option) { .type = enable_option, .name = "PHY Smart Power Down", .err = "defaulting to Disabled", @@ -513,7 +519,7 @@ void __devinit e1000_check_options(struc } } { /* Kumeran Lock Loss Workaround */ - struct e1000_option opt = { + opt = (struct e1000_option) { .type = enable_option, .name = "Kumeran Lock Loss Workaround", .err = "defaulting to Enabled", @@ -578,16 +584,18 @@ static void __devinit e1000_check_fiber_ static void __devinit e1000_check_copper_options(struct e1000_adapter *adapter) { + struct e1000_option opt; unsigned int speed, dplx, an; int bd = adapter->bd_number; { /* Speed */ - struct e1000_opt_list speed_list[] = {{ 0, "" }, - { SPEED_10, "" }, - { SPEED_100, "" }, - { SPEED_1000, "" }}; + static const struct e1000_opt_list speed_list[] = { + { 0, "" }, + { SPEED_10, "" }, + { SPEED_100, "" }, + { SPEED_1000, "" }}; - struct e1000_option opt = { + opt = (struct e1000_option) { .type = list_option, .name = "Speed", .err = "parameter ignored", @@ -604,11 +612,12 @@ static void __devinit e1000_check_copper } } { /* Duplex */ - struct e1000_opt_list dplx_list[] = {{ 0, "" }, - { HALF_DUPLEX, "" }, - { FULL_DUPLEX, "" }}; + static const struct e1000_opt_list dplx_list[] = { + { 0, "" }, + { HALF_DUPLEX, "" }, + { FULL_DUPLEX, "" }}; - struct e1000_option opt = { + opt = (struct e1000_option) { .type = list_option, .name = "Duplex", .err = "parameter ignored", @@ -637,7 +646,7 @@ static void __devinit e1000_check_copper "parameter ignored\n"); adapter->hw.autoneg_advertised = AUTONEG_ADV_DEFAULT; } else { /* Autoneg */ - struct e1000_opt_list an_list[] = + static const struct e1000_opt_list an_list[] = #define AA "AutoNeg advertising " {{ 0x01, AA "10/HD" }, { 0x02, AA "10/FD" }, @@ -671,7 +680,7 @@ static void __devinit e1000_check_copper { 0x2e, AA "1000/FD, 100/FD, 100/HD, 10/FD" }, { 0x2f, AA "1000/FD, 100/FD, 100/HD, 10/FD, 10/HD" }}; - struct e1000_option opt = { + opt = (struct e1000_option) { .type = list_option, .name = "AutoNeg", .err = "parameter ignored", _ Patches currently in -mm which might be from torvalds@linux-foundation.org are origin.patch linux-next.patch workaround-for-a-pci-restoring-bug.patch