From: greg@kroah.com
To: linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Brian Merrell <bgmerrell@novell.com>,
Takahiro Hirofuchi <hirofuchi@users.sourceforge.net>,
gregkh@suse.de
Subject: [patch 02/03] USB: USB/IP: add client driver
Date: Thu, 28 Aug 2008 16:00:35 -0700 [thread overview]
Message-ID: <20080828230035.GC15014@kroah.com> (raw)
In-Reply-To: <20080828230016.GA15014@kroah.com>
[-- Attachment #1: usb-usb-ip-add-client-driver.patch --]
[-- Type: text/plain, Size: 55873 bytes --]
From: Takahiro Hirofuchi <hirofuchi@users.sourceforge.net>
This adds the USB IP client driver
Brian Merrell cleaned up a lot of this code and submitted it for
inclusion. Greg also did a lot of cleanup.
Signed-off-by: Brian G. Merrell <bgmerrell@novell.com>
Cc: Takahiro Hirofuchi <hirofuchi@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/ip/Kconfig | 10
drivers/usb/ip/Makefile | 3
drivers/usb/ip/vhci.h | 142 ++++
drivers/usb/ip/vhci_hcd.c | 1282 ++++++++++++++++++++++++++++++++++++++++++++
drivers/usb/ip/vhci_rx.c | 251 ++++++++
drivers/usb/ip/vhci_sysfs.c | 250 ++++++++
drivers/usb/ip/vhci_tx.c | 239 ++++++++
7 files changed, 2177 insertions(+)
--- a/drivers/usb/ip/Kconfig
+++ b/drivers/usb/ip/Kconfig
@@ -12,3 +12,13 @@ config USB_IP_COMMON
module will be called usbip_common_mod.
If unsure, say N.
+
+config USB_IP_VHCI_HCD
+ tristate "USB IP client driver"
+ depends on USB_IP_COMMON
+ ---help---
+ This enables the USB IP host controller driver which will
+ run on the client machine.
+
+ To compile this driver as a module, choose M here: the
+ module will be called vhci_hcd.
--- a/drivers/usb/ip/Makefile
+++ b/drivers/usb/ip/Makefile
@@ -1,6 +1,9 @@
obj-$(CONFIG_USB_IP_COMMON) += usbip_common_mod.o
usbip_common_mod-objs := usbip_common.o usbip_event.o
+obj-$(CONFIG_USB_IP_VHCI_HCD) += vhci-hcd.o
+vhci-hcd-objs := vhci_sysfs.o vhci_tx.o vhci_rx.o vhci_hcd.o
+
ifeq ($(CONFIG_USB_DEBUG),y)
EXTRA_CFLAGS += -DDEBUG
endif
--- /dev/null
+++ b/drivers/usb/ip/vhci.h
@@ -0,0 +1,142 @@
+/*
+ * Copyright (C) 2003-2008 Takahiro Hirofuchi
+ *
+ * This is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+ * USA.
+ */
+
+#include <linux/platform_device.h>
+#include "../core/hcd.h"
+
+
+struct vhci_device {
+ struct usb_device *udev;
+
+ /*
+ * devid specifies a remote usb device uniquely instead
+ * of combination of busnum and devnum.
+ */
+ __u32 devid;
+
+ /* speed of a remote device */
+ enum usb_device_speed speed;
+
+ /* vhci root-hub port to which this device is attached */
+ __u32 rhport;
+
+ struct usbip_device ud;
+
+
+ /* lock for the below link lists */
+ spinlock_t priv_lock;
+
+ /* vhci_priv is linked to one of them. */
+ struct list_head priv_tx;
+ struct list_head priv_rx;
+
+ /* vhci_unlink is linked to one of them */
+ struct list_head unlink_tx;
+ struct list_head unlink_rx;
+
+ /* vhci_tx thread sleeps for this queue */
+ wait_queue_head_t waitq_tx;
+};
+
+
+/* urb->hcpriv, use container_of() */
+struct vhci_priv {
+ unsigned long seqnum;
+ struct list_head list;
+
+ struct vhci_device *vdev;
+ struct urb *urb;
+};
+
+
+struct vhci_unlink {
+ /* seqnum of this request */
+ unsigned long seqnum;
+
+ struct list_head list;
+
+ /* seqnum of the unlink target */
+ unsigned long unlink_seqnum;
+};
+
+/*
+ * The number of ports is less than 16 ?
+ * USB_MAXCHILDREN is statically defined to 16 in usb.h. Its maximum value
+ * would be 31 because the event_bits[1] of struct usb_hub is defined as
+ * unsigned long in hub.h
+ */
+#define VHCI_NPORTS 8
+
+/* for usb_bus.hcpriv */
+struct vhci_hcd {
+ spinlock_t lock;
+
+ u32 port_status[VHCI_NPORTS];
+
+ unsigned resuming:1;
+ unsigned long re_timeout;
+
+ atomic_t seqnum;
+
+ /*
+ * NOTE:
+ * wIndex shows the port number and begins from 1.
+ * But, the index of this array begins from 0.
+ */
+ struct vhci_device vdev[VHCI_NPORTS];
+
+ /* vhci_device which has not been assiged its address yet */
+ int pending_port;
+};
+
+
+extern struct vhci_hcd *the_controller;
+extern struct attribute_group dev_attr_group;
+
+
+/*-------------------------------------------------------------------------*/
+/* prototype declaration */
+
+/* vhci_hcd.c */
+void rh_port_connect(int rhport, enum usb_device_speed speed);
+void rh_port_disconnect(int rhport);
+void vhci_rx_loop(struct usbip_task *ut);
+void vhci_tx_loop(struct usbip_task *ut);
+
+#define hardware (&the_controller->pdev.dev)
+
+static inline struct vhci_device *port_to_vdev(__u32 port)
+{
+ return &the_controller->vdev[port];
+}
+
+static inline struct vhci_hcd *hcd_to_vhci(struct usb_hcd *hcd)
+{
+ return (struct vhci_hcd *) (hcd->hcd_priv);
+}
+
+static inline struct usb_hcd *vhci_to_hcd(struct vhci_hcd *vhci)
+{
+ return container_of((void *) vhci, struct usb_hcd, hcd_priv);
+}
+
+static inline struct device *vhci_dev(struct vhci_hcd *vhci)
+{
+ return vhci_to_hcd(vhci)->self.controller;
+}
--- /dev/null
+++ b/drivers/usb/ip/vhci_hcd.c
@@ -0,0 +1,1282 @@
+/*
+ * Copyright (C) 2003-2008 Takahiro Hirofuchi
+ *
+ * This is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+ * USA.
+ */
+
+
+#include "usbip_common.h"
+#include "vhci.h"
+
+#define DRIVER_VERSION "1.0"
+#define DRIVER_AUTHOR "Takahiro Hirofuchi"
+#define DRIVER_DESC "Virtual Host Controller Interface Driver for USB/IP"
+#define DRIVER_LICENCE "GPL"
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE(DRIVER_LICENCE);
+
+
+
+/*
+ * TODO
+ * - update root hub emulation
+ * - move the emulation code to userland ?
+ * porting to other operating systems
+ * minimize kernel code
+ * - add suspend/resume code
+ * - clean up everything
+ */
+
+
+/* See usb gadget dummy hcd */
+
+
+static int vhci_hub_status(struct usb_hcd *hcd, char *buff);
+static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
+ u16 wIndex, char *buff, u16 wLength);
+static int vhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
+ gfp_t mem_flags);
+static int vhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status);
+static int vhci_start(struct usb_hcd *vhci_hcd);
+static void vhci_stop(struct usb_hcd *hcd);
+static int vhci_get_frame_number(struct usb_hcd *hcd);
+
+static const char driver_name[] = "vhci_hcd";
+static const char driver_desc[] = "USB/IP Virtual Host Contoroller";
+
+struct vhci_hcd *the_controller;
+
+static const char *bit_desc[] = {
+ "CONNECTION", /*0*/
+ "ENABLE", /*1*/
+ "SUSPEND", /*2*/
+ "OVER_CURRENT", /*3*/
+ "RESET", /*4*/
+ "R5", /*5*/
+ "R6", /*6*/
+ "R7", /*7*/
+ "POWER", /*8*/
+ "LOWSPEED", /*9*/
+ "HIGHSPEED", /*10*/
+ "PORT_TEST", /*11*/
+ "INDICATOR", /*12*/
+ "R13", /*13*/
+ "R14", /*14*/
+ "R15", /*15*/
+ "C_CONNECTION", /*16*/
+ "C_ENABLE", /*17*/
+ "C_SUSPEND", /*18*/
+ "C_OVER_CURRENT", /*19*/
+ "C_RESET", /*20*/
+ "R21", /*21*/
+ "R22", /*22*/
+ "R23", /*23*/
+ "R24", /*24*/
+ "R25", /*25*/
+ "R26", /*26*/
+ "R27", /*27*/
+ "R28", /*28*/
+ "R29", /*29*/
+ "R30", /*30*/
+ "R31", /*31*/
+};
+
+
+static void dump_port_status(u32 status)
+{
+ int i = 0;
+
+ printk(KERN_DEBUG "status %08x:", status);
+ for (i = 0; i < 32; i++) {
+ if (status & (1 << i))
+ printk(" %s", bit_desc[i]);
+ }
+
+ printk("\n");
+}
+
+
+
+void rh_port_connect(int rhport, enum usb_device_speed speed)
+{
+ unsigned long flags;
+
+ dbg_vhci_rh("rh_port_connect %d\n", rhport);
+
+ spin_lock_irqsave(&the_controller->lock, flags);
+
+ the_controller->port_status[rhport] |= USB_PORT_STAT_CONNECTION
+ | (1 << USB_PORT_FEAT_C_CONNECTION);
+
+ switch (speed) {
+ case USB_SPEED_HIGH:
+ the_controller->port_status[rhport] |= USB_PORT_STAT_HIGH_SPEED;
+ break;
+ case USB_SPEED_LOW:
+ the_controller->port_status[rhport] |= USB_PORT_STAT_LOW_SPEED;
+ break;
+ default:
+ break;
+ }
+
+ /* spin_lock(&the_controller->vdev[rhport].ud.lock);
+ * the_controller->vdev[rhport].ud.status = VDEV_CONNECT;
+ * spin_unlock(&the_controller->vdev[rhport].ud.lock); */
+
+ the_controller->pending_port = rhport;
+
+ spin_unlock_irqrestore(&the_controller->lock, flags);
+
+ usb_hcd_poll_rh_status(vhci_to_hcd(the_controller));
+}
+
+void rh_port_disconnect(int rhport)
+{
+ unsigned long flags;
+
+ dbg_vhci_rh("rh_port_disconnect %d\n", rhport);
+
+ spin_lock_irqsave(&the_controller->lock, flags);
+ /* stop_activity(dum, driver); */
+ the_controller->port_status[rhport] &= ~USB_PORT_STAT_CONNECTION;
+ the_controller->port_status[rhport] |=
+ (1 << USB_PORT_FEAT_C_CONNECTION);
+
+
+ /* not yet complete the disconnection
+ * spin_lock(&vdev->ud.lock);
+ * vdev->ud.status = VHC_ST_DISCONNECT;
+ * spin_unlock(&vdev->ud.lock); */
+
+ spin_unlock_irqrestore(&the_controller->lock, flags);
+}
+
+
+
+/*----------------------------------------------------------------------*/
+
+#define PORT_C_MASK \
+ ((USB_PORT_STAT_C_CONNECTION \
+ | USB_PORT_STAT_C_ENABLE \
+ | USB_PORT_STAT_C_SUSPEND \
+ | USB_PORT_STAT_C_OVERCURRENT \
+ | USB_PORT_STAT_C_RESET) << 16)
+
+/*
+ * This function is almostly the same as dummy_hcd.c:dummy_hub_status() without
+ * suspend/resume support. But, it is modified to provide multiple ports.
+ *
+ * @buf: a bitmap to show which port status has been changed.
+ * bit 0: reserved or used for another purpose?
+ * bit 1: the status of port 0 has been changed.
+ * bit 2: the status of port 1 has been changed.
+ * ...
+ * bit 7: the status of port 6 has been changed.
+ * bit 8: the status of port 7 has been changed.
+ * ...
+ * bit 15: the status of port 14 has been changed.
+ *
+ * So, the maximum number of ports is 31 ( port 0 to port 30) ?
+ *
+ * The return value is the actual transfered length in byte. If nothing has
+ * been changed, return 0. In the case that the number of ports is less than or
+ * equal to 6 (VHCI_NPORTS==7), return 1.
+ *
+ */
+static int vhci_hub_status(struct usb_hcd *hcd, char *buf)
+{
+ struct vhci_hcd *vhci;
+ unsigned long flags;
+ int retval = 0;
+
+ /* the enough buffer is allocated according to USB_MAXCHILDREN */
+ unsigned long *event_bits = (unsigned long *) buf;
+ int rhport;
+ int changed = 0;
+
+
+ *event_bits = 0;
+
+ vhci = hcd_to_vhci(hcd);
+
+ spin_lock_irqsave(&vhci->lock, flags);
+ if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) {
+ dbg_vhci_rh("hw accessible flag in on?\n");
+ goto done;
+ }
+
+ /* check pseudo status register for each port */
+ for (rhport = 0; rhport < VHCI_NPORTS; rhport++) {
+ if ((vhci->port_status[rhport] & PORT_C_MASK)) {
+ /* The status of a port has been changed, */
+ dbg_vhci_rh("port %d is changed\n", rhport);
+
+ *event_bits |= 1 << (rhport + 1);
+ changed = 1;
+ }
+ }
+
+ uinfo("changed %d\n", changed);
+
+ if (hcd->state == HC_STATE_SUSPENDED)
+ usb_hcd_resume_root_hub(hcd);
+
+ if (changed)
+ retval = 1 + (VHCI_NPORTS / 8);
+ else
+ retval = 0;
+
+done:
+ spin_unlock_irqrestore(&vhci->lock, flags);
+ return retval;
+}
+
+/* See hub_configure in hub.c */
+static inline void hub_descriptor(struct usb_hub_descriptor *desc)
+{
+ memset(desc, 0, sizeof(*desc));
+ desc->bDescriptorType = 0x29;
+ desc->bDescLength = 9;
+ desc->wHubCharacteristics = (__force __u16)
+ (__constant_cpu_to_le16(0x0001));
+ desc->bNbrPorts = VHCI_NPORTS;
+ desc->bitmap[0] = 0xff;
+ desc->bitmap[1] = 0xff;
+}
+
+static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
+ u16 wIndex, char *buf, u16 wLength)
+{
+ struct vhci_hcd *dum;
+ int retval = 0;
+ unsigned long flags;
+ int rhport;
+
+ u32 prev_port_status[VHCI_NPORTS];
+
+ if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags))
+ return -ETIMEDOUT;
+
+ /*
+ * NOTE:
+ * wIndex shows the port number and begins from 1.
+ */
+ dbg_vhci_rh("typeReq %x wValue %x wIndex %x\n", typeReq, wValue,
+ wIndex);
+ if (wIndex > VHCI_NPORTS)
+ printk(KERN_ERR "%s: invalid port number %d\n", __func__, wIndex);
+ rhport = ((__u8)(wIndex & 0x00ff)) - 1;
+
+ dum = hcd_to_vhci(hcd);
+
+ spin_lock_irqsave(&dum->lock, flags);
+
+ /* store old status and compare now and old later */
+ if (dbg_flag_vhci_rh) {
+ int i = 0;
+ for (i = 0; i < VHCI_NPORTS; i++)
+ prev_port_status[i] = dum->port_status[i];
+ }
+
+ switch (typeReq) {
+ case ClearHubFeature:
+ dbg_vhci_rh(" ClearHubFeature\n");
+ break;
+ case ClearPortFeature:
+ switch (wValue) {
+ case USB_PORT_FEAT_SUSPEND:
+ if (dum->port_status[rhport] & USB_PORT_STAT_SUSPEND) {
+ /* 20msec signaling */
+ dum->resuming = 1;
+ dum->re_timeout =
+ jiffies + msecs_to_jiffies(20);
+ }
+ break;
+ case USB_PORT_FEAT_POWER:
+ dbg_vhci_rh(" ClearPortFeature: USB_PORT_FEAT_POWER\n");
+ dum->port_status[rhport] = 0;
+ /* dum->address = 0; */
+ /* dum->hdev = 0; */
+ dum->resuming = 0;
+ break;
+ case USB_PORT_FEAT_C_RESET:
+ dbg_vhci_rh(" ClearPortFeature: "
+ "USB_PORT_FEAT_C_RESET\n");
+ switch (dum->vdev[rhport].speed) {
+ case USB_SPEED_HIGH:
+ dum->port_status[rhport] |=
+ USB_PORT_STAT_HIGH_SPEED;
+ break;
+ case USB_SPEED_LOW:
+ dum->port_status[rhport] |=
+ USB_PORT_STAT_LOW_SPEED;
+ break;
+ default:
+ break;
+ }
+ default:
+ dbg_vhci_rh(" ClearPortFeature: default %x\n", wValue);
+ dum->port_status[rhport] &= ~(1 << wValue);
+ }
+ break;
+ case GetHubDescriptor:
+ dbg_vhci_rh(" GetHubDescriptor\n");
+ hub_descriptor((struct usb_hub_descriptor *) buf);
+ break;
+ case GetHubStatus:
+ dbg_vhci_rh(" GetHubStatus\n");
+ *(__le32 *) buf = __constant_cpu_to_le32(0);
+ break;
+ case GetPortStatus:
+ dbg_vhci_rh(" GetPortStatus port %x\n", wIndex);
+ if (wIndex > VHCI_NPORTS || wIndex < 1) {
+ printk(KERN_ERR "%s: invalid port number %d\n",
+ __func__, wIndex);
+ retval = -EPIPE;
+ }
+
+ /* we do no care of resume. */
+
+ /* whoever resets or resumes must GetPortStatus to
+ * complete it!!
+ * */
+ if (dum->resuming && time_after(jiffies, dum->re_timeout)) {
+ printk(KERN_ERR "%s: not yet\n", __func__);
+ dum->port_status[rhport] |=
+ (1 << USB_PORT_FEAT_C_SUSPEND);
+ dum->port_status[rhport] &=
+ ~(1 << USB_PORT_FEAT_SUSPEND);
+ dum->resuming = 0;
+ dum->re_timeout = 0;
+ /* if (dum->driver && dum->driver->resume) {
+ * spin_unlock (&dum->lock);
+ * dum->driver->resume (&dum->gadget);
+ * spin_lock (&dum->lock);
+ * } */
+ }
+
+ if ((dum->port_status[rhport] & (1 << USB_PORT_FEAT_RESET)) !=
+ 0 && time_after(jiffies, dum->re_timeout)) {
+ dum->port_status[rhport] |=
+ (1 << USB_PORT_FEAT_C_RESET);
+ dum->port_status[rhport] &=
+ ~(1 << USB_PORT_FEAT_RESET);
+ dum->re_timeout = 0;
+
+ if (dum->vdev[rhport].ud.status ==
+ VDEV_ST_NOTASSIGNED) {
+ dbg_vhci_rh(" enable rhport %d (status %u)\n",
+ rhport,
+ dum->vdev[rhport].ud.status);
+ dum->port_status[rhport] |=
+ USB_PORT_STAT_ENABLE;
+ }
+#if 0
+ if (dum->driver) {
+
+ dum->port_status[rhport] |=
+ USB_PORT_STAT_ENABLE;
+ /* give it the best speed we agree on */
+ dum->gadget.speed = dum->driver->speed;
+ dum->gadget.ep0->maxpacket = 64;
+ switch (dum->gadget.speed) {
+ case USB_SPEED_HIGH:
+ dum->port_status[rhport] |=
+ USB_PORT_STAT_HIGH_SPEED;
+ break;
+ case USB_SPEED_LOW:
+ dum->gadget.ep0->maxpacket = 8;
+ dum->port_status[rhport] |=
+ USB_PORT_STAT_LOW_SPEED;
+ break;
+ default:
+ dum->gadget.speed = USB_SPEED_FULL;
+ break;
+ }
+ }
+#endif
+
+ }
+ ((u16 *) buf)[0] = cpu_to_le16(dum->port_status[rhport]);
+ ((u16 *) buf)[1] =
+ cpu_to_le16(dum->port_status[rhport] >> 16);
+
+ dbg_vhci_rh(" GetPortStatus bye %x %x\n", ((u16 *)buf)[0],
+ ((u16 *)buf)[1]);
+ break;
+ case SetHubFeature:
+ dbg_vhci_rh(" SetHubFeature\n");
+ retval = -EPIPE;
+ break;
+ case SetPortFeature:
+ switch (wValue) {
+ case USB_PORT_FEAT_SUSPEND:
+ dbg_vhci_rh(" SetPortFeature: "
+ "USB_PORT_FEAT_SUSPEND\n");
+ printk(KERN_ERR "%s: not yet\n", __func__);
+#if 0
+ dum->port_status[rhport] |=
+ (1 << USB_PORT_FEAT_SUSPEND);
+ if (dum->driver->suspend) {
+ spin_unlock(&dum->lock);
+ dum->driver->suspend(&dum->gadget);
+ spin_lock(&dum->lock);
+ }
+#endif
+ break;
+ case USB_PORT_FEAT_RESET:
+ dbg_vhci_rh(" SetPortFeature: USB_PORT_FEAT_RESET\n");
+ /* if it's already running, disconnect first */
+ if (dum->port_status[rhport] & USB_PORT_STAT_ENABLE) {
+ dum->port_status[rhport] &=
+ ~(USB_PORT_STAT_ENABLE |
+ USB_PORT_STAT_LOW_SPEED |
+ USB_PORT_STAT_HIGH_SPEED);
+#if 0
+ if (dum->driver) {
+ dev_dbg(hardware, "disconnect\n");
+ stop_activity(dum, dum->driver);
+ }
+#endif
+
+ /* FIXME test that code path! */
+ }
+ /* 50msec reset signaling */
+ dum->re_timeout = jiffies + msecs_to_jiffies(50);
+
+ /* FALLTHROUGH */
+ default:
+ dbg_vhci_rh(" SetPortFeature: default %d\n", wValue);
+ dum->port_status[rhport] |= (1 << wValue);
+ }
+ break;
+
+ default:
+ printk(KERN_ERR "%s: default: no such request\n", __func__);
+ /* dev_dbg (hardware,
+ * "hub control req%04x v%04x i%04x l%d\n",
+ * typeReq, wValue, wIndex, wLength); */
+
+ /* "protocol stall" on error */
+ retval = -EPIPE;
+ }
+
+ if (dbg_flag_vhci_rh) {
+ printk(KERN_DEBUG "port %d\n", rhport);
+ dump_port_status(prev_port_status[rhport]);
+ dump_port_status(dum->port_status[rhport]);
+ }
+ dbg_vhci_rh(" bye\n");
+
+ spin_unlock_irqrestore(&dum->lock, flags);
+
+ return retval;
+}
+
+
+
+/*----------------------------------------------------------------------*/
+
+static struct vhci_device *get_vdev(struct usb_device *udev)
+{
+ int i;
+
+ if (!udev)
+ return NULL;
+
+ for (i = 0; i < VHCI_NPORTS; i++)
+ if (the_controller->vdev[i].udev == udev)
+ return port_to_vdev(i);
+
+ return NULL;
+}
+
+static void vhci_tx_urb(struct urb *urb)
+{
+ struct vhci_device *vdev = get_vdev(urb->dev);
+ struct vhci_priv *priv;
+ unsigned long flag;
+
+ if (!vdev) {
+ err("could not get virtual device");
+ /* BUG(); */
+ return;
+ }
+
+ spin_lock_irqsave(&vdev->priv_lock, flag);
+
+ priv = kzalloc(sizeof(struct vhci_priv), GFP_ATOMIC);
+ if (!priv) {
+ dev_err(&urb->dev->dev, "malloc vhci_priv\n");
+ spin_unlock_irqrestore(&vdev->priv_lock, flag);
+ usbip_event_add(&vdev->ud, VDEV_EVENT_ERROR_MALLOC);
+ return;
+ }
+
+ priv->seqnum = atomic_inc_return(&the_controller->seqnum);
+ if (priv->seqnum == 0xffff)
+ uinfo("seqnum max\n");
+
+ priv->vdev = vdev;
+ priv->urb = urb;
+
+ urb->hcpriv = (void *) priv;
+
+
+ list_add_tail(&priv->list, &vdev->priv_tx);
+
+ wake_up(&vdev->waitq_tx);
+ spin_unlock_irqrestore(&vdev->priv_lock, flag);
+}
+
+static int vhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
+ gfp_t mem_flags)
+{
+ struct device *dev = &urb->dev->dev;
+ int ret = 0;
+ unsigned long flags;
+
+ dbg_vhci_hc("enter, usb_hcd %p urb %p mem_flags %d\n",
+ hcd, urb, mem_flags);
+
+ /* patch to usb_sg_init() is in 2.5.60 */
+ BUG_ON(!urb->transfer_buffer && urb->transfer_buffer_length);
+
+ spin_lock_irqsave(&the_controller->lock, flags);
+
+ /* check HC is active or not */
+ if (!HC_IS_RUNNING(hcd->state)) {
+ dev_err(dev, "HC is not running\n");
+ spin_unlock_irqrestore(&the_controller->lock, flags);
+ return -ENODEV;
+ }
+
+ if (urb->status != -EINPROGRESS) {
+ dev_err(dev, "URB already unlinked!, status %d\n", urb->status);
+ spin_unlock_irqrestore(&the_controller->lock, flags);
+ return urb->status;
+ }
+
+ ret = usb_hcd_link_urb_to_ep(hcd, urb);
+ if (ret)
+ goto no_need_unlink;
+
+ /*
+ * The enumelation process is as follows;
+ *
+ * 1. Get_Descriptor request to DevAddrs(0) EndPoint(0)
+ * to get max packet length of default pipe
+ *
+ * 2. Set_Address request to DevAddr(0) EndPoint(0)
+ *
+ */
+
+ if (usb_pipedevice(urb->pipe) == 0) {
+ __u8 type = usb_pipetype(urb->pipe);
+ struct usb_ctrlrequest *ctrlreq =
+ (struct usb_ctrlrequest *) urb->setup_packet;
+ struct vhci_device *vdev =
+ port_to_vdev(the_controller->pending_port);
+
+ if (type != PIPE_CONTROL || !ctrlreq) {
+ dev_err(dev, "invalid request to devnum 0\n");
+ ret = EINVAL;
+ goto no_need_xmit;
+ }
+
+ switch (ctrlreq->bRequest) {
+ case USB_REQ_SET_ADDRESS:
+ /* set_address may come when a device is reset */
+ dev_info(dev, "SetAddress Request (%d) to port %d\n",
+ ctrlreq->wValue, vdev->rhport);
+
+ vdev->udev = urb->dev;
+
+ spin_lock(&vdev->ud.lock);
+ vdev->ud.status = VDEV_ST_USED;
+ spin_unlock(&vdev->ud.lock);
+
+ if (urb->status == -EINPROGRESS) {
+ /* This request is successfully completed. */
+ /* If not -EINPROGRESS, possibly unlinked. */
+ urb->status = 0;
+ }
+
+ goto no_need_xmit;
+
+ case USB_REQ_GET_DESCRIPTOR:
+ if (ctrlreq->wValue == (USB_DT_DEVICE << 8))
+ dbg_vhci_hc("Not yet?: "
+ "Get_Descriptor to device 0 "
+ "(get max pipe size)\n");
+
+ /* FIXME: reference count? (usb_get_dev()) */
+ vdev->udev = urb->dev;
+ goto out;
+
+ default:
+ /* NOT REACHED */
+ dev_err(dev, "invalid request to devnum 0 bRequest %u, "
+ "wValue %u\n", ctrlreq->bRequest,
+ ctrlreq->wValue);
+ ret = -EINVAL;
+ goto no_need_xmit;
+ }
+
+ }
+
+out:
+ vhci_tx_urb(urb);
+
+ spin_unlock_irqrestore(&the_controller->lock, flags);
+
+ return 0;
+
+no_need_xmit:
+ usb_hcd_unlink_urb_from_ep(hcd, urb);
+no_need_unlink:
+ spin_unlock_irqrestore(&the_controller->lock, flags);
+
+ usb_hcd_giveback_urb(vhci_to_hcd(the_controller), urb, urb->status);
+
+ return 0;
+}
+
+/*
+ * vhci_rx gives back the urb after receiving the reply of the urb. If an
+ * unlink pdu is sent or not, vhci_rx receives a normal return pdu and gives
+ * back its urb. For the driver unlinking the urb, the content of the urb is
+ * not important, but the calling to its completion handler is important; the
+ * completion of unlinking is notified by the completion handler.
+ *
+ *
+ * CLIENT SIDE
+ *
+ * - When vhci_hcd receives RET_SUBMIT,
+ *
+ * - case 1a). the urb of the pdu is not unlinking.
+ * - normal case
+ * => just give back the urb
+ *
+ * - case 1b). the urb of the pdu is unlinking.
+ * - usbip.ko will return a reply of the unlinking request.
+ * => give back the urb now and go to case 2b).
+ *
+ * - When vhci_hcd receives RET_UNLINK,
+ *
+ * - case 2a). a submit request is still pending in vhci_hcd.
+ * - urb was really pending in usbip.ko and urb_unlink_urb() was
+ * completed there.
+ * => free a pending submit request
+ * => notify unlink completeness by giving back the urb
+ *
+ * - case 2b). a submit request is *not* pending in vhci_hcd.
+ * - urb was already given back to the core driver.
+ * => do not give back the urb
+ *
+ *
+ * SERVER SIDE
+ *
+ * - When usbip receives CMD_UNLINK,
+ *
+ * - case 3a). the urb of the unlink request is now in submission.
+ * => do usb_unlink_urb().
+ * => after the unlink is completed, send RET_UNLINK.
+ *
+ * - case 3b). the urb of the unlink request is not in submission.
+ * - may be already completed or never be received
+ * => send RET_UNLINK
+ *
+ */
+static int vhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
+{
+ unsigned long flags;
+ struct vhci_priv *priv;
+ struct vhci_device *vdev;
+
+ uinfo("vhci_hcd: dequeue a urb %p\n", urb);
+
+
+ spin_lock_irqsave(&the_controller->lock, flags);
+
+ priv = urb->hcpriv;
+ if (!priv) {
+ /* URB was never linked! or will be soon given back by
+ * vhci_rx. */
+ spin_unlock_irqrestore(&the_controller->lock, flags);
+ return 0;
+ }
+
+ {
+ int ret = 0;
+ ret = usb_hcd_check_unlink_urb(hcd, urb, status);
+ if (ret) {
+ spin_unlock_irqrestore(&the_controller->lock, flags);
+ return 0;
+ }
+ }
+
+ /* send unlink request here? */
+ vdev = priv->vdev;
+
+ if (!vdev->ud.tcp_socket) {
+ /* tcp connection is closed */
+ unsigned long flags2;
+
+ spin_lock_irqsave(&vdev->priv_lock, flags2);
+
+ uinfo("vhci_hcd: device %p seems to be disconnected\n", vdev);
+ list_del(&priv->list);
+ kfree(priv);
+ urb->hcpriv = NULL;
+
+ spin_unlock_irqrestore(&vdev->priv_lock, flags2);
+
+ } else {
+ /* tcp connection is alive */
+ unsigned long flags2;
+ struct vhci_unlink *unlink;
+
+ spin_lock_irqsave(&vdev->priv_lock, flags2);
+
+ /* setup CMD_UNLINK pdu */
+ unlink = kzalloc(sizeof(struct vhci_unlink), GFP_ATOMIC);
+ if (!unlink) {
+ uerr("malloc vhci_unlink\n");
+ spin_unlock_irqrestore(&vdev->priv_lock, flags2);
+ spin_unlock_irqrestore(&the_controller->lock, flags);
+ usbip_event_add(&vdev->ud, VDEV_EVENT_ERROR_MALLOC);
+ return -ENOMEM;
+ }
+
+ unlink->seqnum = atomic_inc_return(&the_controller->seqnum);
+ if (unlink->seqnum == 0xffff)
+ uinfo("seqnum max\n");
+
+ unlink->unlink_seqnum = priv->seqnum;
+
+ uinfo("vhci_hcd: device %p seems to be still connected\n",
+ vdev);
+
+ /* send cmd_unlink and try to cancel the pending URB in the
+ * peer */
+ list_add_tail(&unlink->list, &vdev->unlink_tx);
+ wake_up(&vdev->waitq_tx);
+
+ spin_unlock_irqrestore(&vdev->priv_lock, flags2);
+ }
+
+
+ /*
+ * If tcp connection is alive, we have sent CMD_UNLINK.
+ * vhci_rx will receive RET_UNLINK and give back the URB.
+ * Otherwise, we give back it here.
+ */
+ if (!vdev->ud.tcp_socket) {
+ /* tcp connection is closed */
+ uinfo("vhci_hcd: vhci_urb_dequeue() gives back urb %p\n", urb);
+
+ usb_hcd_unlink_urb_from_ep(hcd, urb);
+
+ spin_unlock_irqrestore(&the_controller->lock, flags);
+ usb_hcd_giveback_urb(vhci_to_hcd(the_controller), urb,
+ urb->status);
+ spin_lock_irqsave(&the_controller->lock, flags);
+ }
+
+ spin_unlock_irqrestore(&the_controller->lock, flags);
+
+ dbg_vhci_hc("leave\n");
+ return 0;
+}
+
+
+static void vhci_device_unlink_cleanup(struct vhci_device *vdev)
+{
+ struct vhci_unlink *unlink, *tmp;
+
+ spin_lock(&vdev->priv_lock);
+
+ list_for_each_entry_safe(unlink, tmp, &vdev->unlink_tx, list) {
+ list_del(&unlink->list);
+ kfree(unlink);
+ }
+
+ list_for_each_entry_safe(unlink, tmp, &vdev->unlink_rx, list) {
+ list_del(&unlink->list);
+ kfree(unlink);
+ }
+
+ spin_unlock(&vdev->priv_lock);
+}
+
+/*
+ * The important thing is that only one context begins cleanup.
+ * This is why error handling and cleanup become simple.
+ * We do not want to consider race condition as possible.
+ */
+static void vhci_shutdown_connection(struct usbip_device *ud)
+{
+ struct vhci_device *vdev = container_of(ud, struct vhci_device, ud);
+
+ /* need this? see stub_dev.c */
+ if (ud->tcp_socket) {
+ udbg("shutdown tcp_socket %p\n", ud->tcp_socket);
+ kernel_sock_shutdown(ud->tcp_socket, SHUT_RDWR);
+ }
+
+ usbip_stop_threads(&vdev->ud);
+ uinfo("stop threads\n");
+
+ /* active connection is closed */
+ if (vdev->ud.tcp_socket != NULL) {
+ sock_release(vdev->ud.tcp_socket);
+ vdev->ud.tcp_socket = NULL;
+ }
+ uinfo("release socket\n");
+
+ vhci_device_unlink_cleanup(vdev);
+
+ /*
+ * rh_port_disconnect() is a trigger of ...
+ * usb_disable_device():
+ * disable all the endpoints for a USB device.
+ * usb_disable_endpoint():
+ * disable endpoints. pending urbs are unlinked(dequeued).
+ *
+ * NOTE: After calling rh_port_disconnect(), the USB device drivers of a
+ * deteched device should release used urbs in a cleanup function(i.e.
+ * xxx_disconnect()). Therefore, vhci_hcd does not need to release
+ * pushed urbs and their private data in this function.
+ *
+ * NOTE: vhci_dequeue() must be considered carefully. When shutdowning
+ * a connection, vhci_shutdown_connection() expects vhci_dequeue()
+ * gives back pushed urbs and frees their private data by request of
+ * the cleanup function of a USB driver. When unlinking a urb with an
+ * active connection, vhci_dequeue() does not give back the urb which
+ * is actually given back by vhci_rx after receiving its return pdu.
+ *
+ */
+ rh_port_disconnect(vdev->rhport);
+
+ uinfo("disconnect device\n");
+}
+
+
+static void vhci_device_reset(struct usbip_device *ud)
+{
+ struct vhci_device *vdev = container_of(ud, struct vhci_device, ud);
+
+ spin_lock(&ud->lock);
+
+ vdev->speed = 0;
+ vdev->devid = 0;
+
+ ud->tcp_socket = NULL;
+
+ ud->status = VDEV_ST_NULL;
+
+ spin_unlock(&ud->lock);
+}
+
+static void vhci_device_unusable(struct usbip_device *ud)
+{
+ spin_lock(&ud->lock);
+
+ ud->status = VDEV_ST_ERROR;
+
+ spin_unlock(&ud->lock);
+}
+
+static void vhci_device_init(struct vhci_device *vdev)
+{
+ memset(vdev, 0, sizeof(*vdev));
+
+ usbip_task_init(&vdev->ud.tcp_rx, "vhci_rx", vhci_rx_loop);
+ usbip_task_init(&vdev->ud.tcp_tx, "vhci_tx", vhci_tx_loop);
+
+ vdev->ud.side = USBIP_VHCI;
+ vdev->ud.status = VDEV_ST_NULL;
+ /* vdev->ud.lock = SPIN_LOCK_UNLOCKED; */
+ spin_lock_init(&vdev->ud.lock);
+
+ INIT_LIST_HEAD(&vdev->priv_rx);
+ INIT_LIST_HEAD(&vdev->priv_tx);
+ INIT_LIST_HEAD(&vdev->unlink_tx);
+ INIT_LIST_HEAD(&vdev->unlink_rx);
+ /* vdev->priv_lock = SPIN_LOCK_UNLOCKED; */
+ spin_lock_init(&vdev->priv_lock);
+
+ init_waitqueue_head(&vdev->waitq_tx);
+
+ vdev->ud.eh_ops.shutdown = vhci_shutdown_connection;
+ vdev->ud.eh_ops.reset = vhci_device_reset;
+ vdev->ud.eh_ops.unusable = vhci_device_unusable;
+
+ usbip_start_eh(&vdev->ud);
+}
+
+
+/*----------------------------------------------------------------------*/
+
+static int vhci_start(struct usb_hcd *hcd)
+{
+ struct vhci_hcd *vhci = hcd_to_vhci(hcd);
+ int rhport;
+ int err = 0;
+
+ dbg_vhci_hc("enter vhci_start\n");
+
+
+ /* initialize private data of usb_hcd */
+
+ for (rhport = 0; rhport < VHCI_NPORTS; rhport++) {
+ struct vhci_device *vdev = &vhci->vdev[rhport];
+ vhci_device_init(vdev);
+ vdev->rhport = rhport;
+ }
+
+ atomic_set(&vhci->seqnum, 0);
+ spin_lock_init(&vhci->lock);
+
+
+
+ hcd->power_budget = 0; /* no limit */
+ hcd->state = HC_STATE_RUNNING;
+ hcd->uses_new_polling = 1;
+
+
+ /* vhci_hcd is now ready to be controlled through sysfs */
+ err = sysfs_create_group(&vhci_dev(vhci)->kobj, &dev_attr_group);
+ if (err) {
+ uerr("create sysfs files\n");
+ return err;
+ }
+
+ return 0;
+}
+
+static void vhci_stop(struct usb_hcd *hcd)
+{
+ struct vhci_hcd *vhci = hcd_to_vhci(hcd);
+ int rhport = 0;
+
+ dbg_vhci_hc("stop VHCI controller\n");
+
+
+ /* 1. remove the userland interface of vhci_hcd */
+ sysfs_remove_group(&vhci_dev(vhci)->kobj, &dev_attr_group);
+
+ /* 2. shutdown all the ports of vhci_hcd */
+ for (rhport = 0 ; rhport < VHCI_NPORTS; rhport++) {
+ struct vhci_device *vdev = &vhci->vdev[rhport];
+
+ usbip_event_add(&vdev->ud, VDEV_EVENT_REMOVED);
+ usbip_stop_eh(&vdev->ud);
+ }
+
+
+ uinfo("vhci_stop done\n");
+}
+
+/*----------------------------------------------------------------------*/
+
+static int vhci_get_frame_number(struct usb_hcd *hcd)
+{
+ uerr("Not yet implemented\n");
+ return 0;
+}
+
+
+#ifdef CONFIG_PM
+
+/* FIXME: suspend/resume */
+static int vhci_bus_suspend(struct usb_hcd *hcd)
+{
+ struct vhci_hcd *vhci = hcd_to_vhci(hcd);
+
+ dev_dbg(&hcd->self.root_hub->dev, "%s\n", __func__);
+
+ spin_lock_irq(&vhci->lock);
+ /* vhci->rh_state = DUMMY_RH_SUSPENDED;
+ * set_link_state(vhci); */
+ hcd->state = HC_STATE_SUSPENDED;
+ spin_unlock_irq(&vhci->lock);
+
+ return 0;
+}
+
+static int vhci_bus_resume(struct usb_hcd *hcd)
+{
+ struct vhci_hcd *vhci = hcd_to_vhci(hcd);
+ int rc = 0;
+
+ dev_dbg(&hcd->self.root_hub->dev, "%s\n", __func__);
+
+ spin_lock_irq(&vhci->lock);
+ if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) {
+ rc = -ESHUTDOWN;
+ } else {
+ /* vhci->rh_state = DUMMY_RH_RUNNING;
+ * set_link_state(vhci);
+ * if (!list_empty(&vhci->urbp_list))
+ * mod_timer(&vhci->timer, jiffies); */
+ hcd->state = HC_STATE_RUNNING;
+ }
+ spin_unlock_irq(&vhci->lock);
+ return rc;
+
+ return 0;
+}
+
+#else
+
+#define vhci_bus_suspend NULL
+#define vhci_bus_resume NULL
+#endif
+
+
+
+static struct hc_driver vhci_hc_driver = {
+ .description = driver_name,
+ .product_desc = driver_desc,
+ .hcd_priv_size = sizeof(struct vhci_hcd),
+
+ .flags = HCD_USB2,
+
+ .start = vhci_start,
+ .stop = vhci_stop,
+
+ .urb_enqueue = vhci_urb_enqueue,
+ .urb_dequeue = vhci_urb_dequeue,
+
+ .get_frame_number = vhci_get_frame_number,
+
+ .hub_status_data = vhci_hub_status,
+ .hub_control = vhci_hub_control,
+ .bus_suspend = vhci_bus_suspend,
+ .bus_resume = vhci_bus_resume,
+};
+
+static int vhci_hcd_probe(struct platform_device *pdev)
+{
+ struct usb_hcd *hcd;
+ int ret;
+
+ uinfo("proving...\n");
+
+ dbg_vhci_hc("name %s id %d\n", pdev->name, pdev->id);
+
+
+ /* will be removed */
+ if (pdev->dev.dma_mask) {
+ info("vhci_hcd DMA not supported\n");
+ return -EINVAL;
+ }
+
+
+ /*
+ * Allocate and initialize hcd.
+ * Our private data is also allocated automatically.
+ */
+ hcd = usb_create_hcd(&vhci_hc_driver, &pdev->dev, pdev->dev.bus_id);
+ if (!hcd) {
+ uerr("create hcd failed\n");
+ return -ENOMEM;
+ }
+
+
+ /* this is private data for vhci_hcd */
+ the_controller = hcd_to_vhci(hcd);
+
+ /*
+ * Finish generic HCD structure initialization and register.
+ * Call the driver's reset() and start() routines.
+ */
+ ret = usb_add_hcd(hcd, 0, 0);
+ if (ret != 0) {
+ uerr("usb_add_hcd failed %d\n", ret);
+ usb_put_hcd(hcd);
+ the_controller = NULL;
+ return ret;
+ }
+
+
+ dbg_vhci_hc("bye\n");
+ return 0;
+}
+
+
+static int vhci_hcd_remove(struct platform_device *pdev)
+{
+ struct usb_hcd *hcd;
+
+ hcd = platform_get_drvdata(pdev);
+ if (!hcd)
+ return 0;
+
+ /*
+ * Disconnects the root hub,
+ * then reverses the effects of usb_add_hcd(),
+ * invoking the HCD's stop() methods.
+ */
+ usb_remove_hcd(hcd);
+ usb_put_hcd(hcd);
+ the_controller = NULL;
+
+
+ return 0;
+}
+
+
+
+#ifdef CONFIG_PM
+
+/* what should happen for USB/IP under suspend/resume? */
+static int vhci_hcd_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ struct usb_hcd *hcd;
+ int rhport = 0;
+ int connected = 0;
+ int ret = 0;
+
+ dev_dbg(&pdev->dev, "%s\n", __func__);
+
+ hcd = platform_get_drvdata(pdev);
+
+ spin_lock(&the_controller->lock);
+
+ for (rhport = 0; rhport < VHCI_NPORTS; rhport++)
+ if (the_controller->port_status[rhport] &
+ USB_PORT_STAT_CONNECTION)
+ connected += 1;
+
+ spin_unlock(&the_controller->lock);
+
+ if (connected > 0) {
+ uinfo("We have %d active connection%s. Do not suspend.\n",
+ connected, (connected == 1 ? "" : "s"));
+ ret = -EBUSY;
+ } else {
+ uinfo("suspend vhci_hcd");
+ clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+ }
+
+ return ret;
+}
+
+static int vhci_hcd_resume(struct platform_device *pdev)
+{
+ struct usb_hcd *hcd;
+
+ dev_dbg(&pdev->dev, "%s\n", __func__);
+
+ hcd = platform_get_drvdata(pdev);
+ set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+ usb_hcd_poll_rh_status(hcd);
+
+ return 0;
+}
+
+#else
+
+#define vhci_hcd_suspend NULL
+#define vhci_hcd_resume NULL
+
+#endif
+
+
+static struct platform_driver vhci_driver = {
+ .probe = vhci_hcd_probe,
+ .remove = __devexit_p(vhci_hcd_remove),
+ .suspend = vhci_hcd_suspend,
+ .resume = vhci_hcd_resume,
+ .driver = {
+ .name = (char *) driver_name,
+ .owner = THIS_MODULE,
+ },
+};
+
+/*----------------------------------------------------------------------*/
+
+/*
+ * The VHCI 'device' is 'virtual'; not a real plug&play hardware.
+ * We need to add this virtual device as a platform device arbitrarily:
+ * 1. platform_device_register()
+ */
+static void the_pdev_release(struct device *dev)
+{
+ return;
+}
+
+static struct platform_device the_pdev = {
+ /* should be the same name as driver_name */
+ .name = (char *) driver_name,
+ .id = -1,
+ .dev = {
+ /* .driver = &vhci_driver, */
+ .release = the_pdev_release,
+ },
+};
+
+static int __init vhci_init(void)
+{
+ int ret;
+
+ dbg_vhci_hc("enter\n");
+ if (usb_disabled())
+ return -ENODEV;
+
+ info("driver %s, %s\n", driver_name, DRIVER_VERSION);
+
+ ret = platform_driver_register(&vhci_driver);
+ if (ret < 0)
+ goto err_driver_register;
+
+ ret = platform_device_register(&the_pdev);
+ if (ret < 0)
+ goto err_platform_device_register;
+
+
+ dbg_vhci_hc("bye\n");
+ return ret;
+
+
+
+ /* error occurred */
+
+err_platform_device_register:
+ platform_driver_unregister(&vhci_driver);
+
+err_driver_register:
+
+ dbg_vhci_hc("bye\n");
+ return ret;
+}
+module_init(vhci_init);
+
+
+static void __exit vhci_cleanup(void)
+{
+ dbg_vhci_hc("enter\n");
+
+ platform_device_unregister(&the_pdev);
+ platform_driver_unregister(&vhci_driver);
+
+ dbg_vhci_hc("bye\n");
+}
+module_exit(vhci_cleanup);
--- /dev/null
+++ b/drivers/usb/ip/vhci_rx.c
@@ -0,0 +1,251 @@
+/*
+ * Copyright (C) 2003-2008 Takahiro Hirofuchi
+ *
+ * This is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+ * USA.
+ */
+
+#include "usbip_common.h"
+#include "vhci.h"
+
+
+/* get URB from transmitted urb queue */
+static struct urb *pickup_urb_and_free_priv(struct vhci_device *vdev,
+ __u32 seqnum)
+{
+ struct vhci_priv *priv, *tmp;
+ struct urb *urb = NULL;
+ int status;
+
+ spin_lock(&vdev->priv_lock);
+
+ list_for_each_entry_safe(priv, tmp, &vdev->priv_rx, list) {
+ if (priv->seqnum == seqnum) {
+ urb = priv->urb;
+ status = urb->status;
+
+ dbg_vhci_rx("find urb %p vurb %p seqnum %u\n",
+ urb, priv, seqnum);
+
+ /* TODO: fix logic here to improve indent situtation */
+ if (status != -EINPROGRESS) {
+ if (status == -ENOENT ||
+ status == -ECONNRESET)
+ dev_info(&urb->dev->dev,
+ "urb %p was unlinked "
+ "%ssynchronuously.\n", urb,
+ status == -ENOENT ? "" : "a");
+ else
+ dev_info(&urb->dev->dev,
+ "urb %p may be in a error, "
+ "status %d\n", urb, status);
+ }
+
+ list_del(&priv->list);
+ kfree(priv);
+ urb->hcpriv = NULL;
+
+ break;
+ }
+ }
+
+ spin_unlock(&vdev->priv_lock);
+
+ return urb;
+}
+
+static void vhci_recv_ret_submit(struct vhci_device *vdev,
+ struct usbip_header *pdu)
+{
+ struct usbip_device *ud = &vdev->ud;
+ struct urb *urb;
+
+
+ urb = pickup_urb_and_free_priv(vdev, pdu->base.seqnum);
+
+
+ if (!urb) {
+ uerr("cannot find a urb of seqnum %u\n", pdu->base.seqnum);
+ uinfo("max seqnum %d\n", atomic_read(&the_controller->seqnum));
+ usbip_event_add(ud, VDEV_EVENT_ERROR_TCP);
+ return;
+ }
+
+
+ /* unpack the pdu to a urb */
+ usbip_pack_pdu(pdu, urb, USBIP_RET_SUBMIT, 0);
+
+
+ /* recv transfer buffer */
+ if (usbip_recv_xbuff(ud, urb) < 0)
+ return;
+
+
+ /* recv iso_packet_descriptor */
+ if (usbip_recv_iso(ud, urb) < 0)
+ return;
+
+
+ if (dbg_flag_vhci_rx)
+ usbip_dump_urb(urb);
+
+
+ dbg_vhci_rx("now giveback urb %p\n", urb);
+
+ spin_lock(&the_controller->lock);
+ usb_hcd_unlink_urb_from_ep(vhci_to_hcd(the_controller), urb);
+ spin_unlock(&the_controller->lock);
+
+ usb_hcd_giveback_urb(vhci_to_hcd(the_controller), urb, urb->status);
+
+
+ dbg_vhci_rx("Leave\n");
+
+ return;
+}
+
+
+static struct vhci_unlink *dequeue_pending_unlink(struct vhci_device *vdev,
+ struct usbip_header *pdu)
+{
+ struct vhci_unlink *unlink, *tmp;
+
+ spin_lock(&vdev->priv_lock);
+
+ list_for_each_entry_safe(unlink, tmp, &vdev->unlink_rx, list) {
+ uinfo("unlink->seqnum %lu\n", unlink->seqnum);
+ if (unlink->seqnum == pdu->base.seqnum) {
+ dbg_vhci_rx("found pending unlink, %lu\n",
+ unlink->seqnum);
+ list_del(&unlink->list);
+
+ spin_unlock(&vdev->priv_lock);
+ return unlink;
+ }
+ }
+
+ spin_unlock(&vdev->priv_lock);
+
+ return NULL;
+}
+
+
+static void vhci_recv_ret_unlink(struct vhci_device *vdev,
+ struct usbip_header *pdu)
+{
+ struct vhci_unlink *unlink;
+ struct urb *urb;
+
+ usbip_dump_header(pdu);
+
+ unlink = dequeue_pending_unlink(vdev, pdu);
+ if (!unlink) {
+ uinfo("cannot find the pending unlink %u\n", pdu->base.seqnum);
+ return;
+ }
+
+ urb = pickup_urb_and_free_priv(vdev, unlink->unlink_seqnum);
+ if (!urb) {
+ /*
+ * I get the result of a unlink request. But, it seems that I
+ * already received the result of its submit result and gave
+ * back the URB.
+ */
+ uinfo("the urb (seqnum %d) was already given backed\n",
+ pdu->base.seqnum);
+ } else {
+ dbg_vhci_rx("now giveback urb %p\n", urb);
+
+ /* If unlink is succeed, status is -ECONNRESET */
+ urb->status = pdu->u.ret_unlink.status;
+ uinfo("%d\n", urb->status);
+
+ spin_lock(&the_controller->lock);
+ usb_hcd_unlink_urb_from_ep(vhci_to_hcd(the_controller), urb);
+ spin_unlock(&the_controller->lock);
+
+ usb_hcd_giveback_urb(vhci_to_hcd(the_controller), urb,
+ urb->status);
+ }
+
+ kfree(unlink);
+
+ return;
+}
+
+/* recv a pdu */
+static void vhci_rx_pdu(struct usbip_device *ud)
+{
+ int ret;
+ struct usbip_header pdu;
+ struct vhci_device *vdev = container_of(ud, struct vhci_device, ud);
+
+
+ dbg_vhci_rx("Enter\n");
+
+ memset(&pdu, 0, sizeof(pdu));
+
+
+ /* 1. receive a pdu header */
+ ret = usbip_xmit(0, ud->tcp_socket, (char *) &pdu, sizeof(pdu), 0);
+ if (ret != sizeof(pdu)) {
+ uerr("receiving pdu failed! size is %d, should be %d\n",
+ ret, sizeof(pdu));
+ usbip_event_add(ud, VDEV_EVENT_ERROR_TCP);
+ return;
+ }
+
+ usbip_header_correct_endian(&pdu, 0);
+
+ if (dbg_flag_vhci_rx)
+ usbip_dump_header(&pdu);
+
+ switch (pdu.base.command) {
+ case USBIP_RET_SUBMIT:
+ vhci_recv_ret_submit(vdev, &pdu);
+ break;
+ case USBIP_RET_UNLINK:
+ vhci_recv_ret_unlink(vdev, &pdu);
+ break;
+ default:
+ /* NOTREACHED */
+ uerr("unknown pdu %u\n", pdu.base.command);
+ usbip_dump_header(&pdu);
+ usbip_event_add(ud, VDEV_EVENT_ERROR_TCP);
+ }
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+void vhci_rx_loop(struct usbip_task *ut)
+{
+ struct usbip_device *ud = container_of(ut, struct usbip_device, tcp_rx);
+
+
+ while (1) {
+ if (signal_pending(current)) {
+ dbg_vhci_rx("signal catched!\n");
+ break;
+ }
+
+
+ if (usbip_event_happend(ud))
+ break;
+
+ vhci_rx_pdu(ud);
+ }
+}
+
--- /dev/null
+++ b/drivers/usb/ip/vhci_sysfs.c
@@ -0,0 +1,250 @@
+/*
+ * Copyright (C) 2003-2008 Takahiro Hirofuchi
+ *
+ * This is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+ * USA.
+ */
+
+#include "usbip_common.h"
+#include "vhci.h"
+
+#include <linux/in.h>
+
+/* TODO: refine locking ?*/
+
+/* Sysfs entry to show port status */
+static ssize_t show_status(struct device *dev, struct device_attribute *attr,
+ char *out)
+{
+ char *s = out;
+ int i = 0;
+
+ if (!the_controller || !out)
+ BUG();
+
+ spin_lock(&the_controller->lock);
+
+ /*
+ * output example:
+ * prt sta spd dev socket local_busid
+ * 000 004 000 000 c5a7bb80 1-2.3
+ * 001 004 000 000 d8cee980 2-3.4
+ *
+ * IP address can be retrieved from a socket pointer address by looking
+ * up /proc/net/{tcp,tcp6}. Also, a userland program may remember a
+ * port number and its peer IP address.
+ */
+ out += sprintf(out, "prt sta spd bus dev socket "
+ "local_busid\n");
+
+ for (i = 0; i < VHCI_NPORTS; i++) {
+ struct vhci_device *vdev = port_to_vdev(i);
+
+ spin_lock(&vdev->ud.lock);
+
+ out += sprintf(out, "%03u %03u ", i, vdev->ud.status);
+
+ if (vdev->ud.status == VDEV_ST_USED) {
+ out += sprintf(out, "%03u %08x ",
+ vdev->speed, vdev->devid);
+ out += sprintf(out, "%16p ", vdev->ud.tcp_socket);
+ out += sprintf(out, "%s", vdev->udev->dev.bus_id);
+
+ } else
+ out += sprintf(out, "000 000 000 0000000000000000 0-0");
+
+ out += sprintf(out, "\n");
+
+ spin_unlock(&vdev->ud.lock);
+ }
+
+ spin_unlock(&the_controller->lock);
+
+ return out - s;
+}
+static DEVICE_ATTR(status, S_IRUGO, show_status, NULL);
+
+/* Sysfs entry to shutdown a virtual connection */
+static int vhci_port_disconnect(__u32 rhport)
+{
+ struct vhci_device *vdev;
+
+ dbg_vhci_sysfs("enter\n");
+
+ /* lock */
+ spin_lock(&the_controller->lock);
+
+ vdev = port_to_vdev(rhport);
+
+ spin_lock(&vdev->ud.lock);
+ if (vdev->ud.status == VDEV_ST_NULL) {
+ uerr("not connected %d\n", vdev->ud.status);
+
+ /* unlock */
+ spin_unlock(&vdev->ud.lock);
+ spin_unlock(&the_controller->lock);
+
+ return -EINVAL;
+ }
+
+ /* unlock */
+ spin_unlock(&vdev->ud.lock);
+ spin_unlock(&the_controller->lock);
+
+ usbip_event_add(&vdev->ud, VDEV_EVENT_DOWN);
+
+ return 0;
+}
+
+static ssize_t store_detach(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int err;
+ __u32 rhport = 0;
+
+ sscanf(buf, "%u", &rhport);
+
+ /* check rhport */
+ if (rhport >= VHCI_NPORTS) {
+ uerr("invalid port %u\n", rhport);
+ return -EINVAL;
+ }
+
+ err = vhci_port_disconnect(rhport);
+ if (err < 0)
+ return -EINVAL;
+
+ dbg_vhci_sysfs("Leave\n");
+ return count;
+}
+static DEVICE_ATTR(detach, S_IWUSR, NULL, store_detach);
+
+/* Sysfs entry to establish a virtual connection */
+static int valid_args(__u32 rhport, enum usb_device_speed speed)
+{
+ /* check rhport */
+ if ((rhport < 0) || (rhport >= VHCI_NPORTS)) {
+ uerr("port %u\n", rhport);
+ return -EINVAL;
+ }
+
+ /* check speed */
+ switch (speed) {
+ case USB_SPEED_LOW:
+ case USB_SPEED_FULL:
+ case USB_SPEED_HIGH:
+ case USB_SPEED_VARIABLE:
+ break;
+ default:
+ uerr("speed %d\n", speed);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/*
+ * To start a new USB/IP attachment, a userland program needs to setup a TCP
+ * connection and then write its socket descriptor with remote device
+ * information into this sysfs file.
+ *
+ * A remote device is virtually attached to the root-hub port of @rhport with
+ * @speed. @devid is embedded into a request to specify the remote device in a
+ * server host.
+ *
+ * write() returns 0 on success, else negative errno.
+ */
+static ssize_t store_attach(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct vhci_device *vdev;
+ struct socket *socket;
+ int sockfd = 0;
+ __u32 rhport = 0, devid = 0, speed = 0;
+
+ /*
+ * @rhport: port number of vhci_hcd
+ * @sockfd: socket descriptor of an established TCP connection
+ * @devid: unique device identifier in a remote host
+ * @speed: usb device speed in a remote host
+ */
+ sscanf(buf, "%u %u %u %u", &rhport, &sockfd, &devid, &speed);
+
+ dbg_vhci_sysfs("rhport(%u) sockfd(%u) devid(%u) speed(%u)\n",
+ rhport, sockfd, devid, speed);
+
+
+ /* check received parameters */
+ if (valid_args(rhport, speed) < 0)
+ return -EINVAL;
+
+ /* check sockfd */
+ socket = sockfd_to_socket(sockfd);
+ if (!socket)
+ return -EINVAL;
+
+ /* now need lock until setting vdev status as used */
+
+ /* begin a lock */
+ spin_lock(&the_controller->lock);
+
+ vdev = port_to_vdev(rhport);
+
+ spin_lock(&vdev->ud.lock);
+
+ if (vdev->ud.status != VDEV_ST_NULL) {
+ /* end of the lock */
+ spin_unlock(&vdev->ud.lock);
+ spin_unlock(&the_controller->lock);
+
+ uerr("port %d already used\n", rhport);
+ return -EINVAL;
+ }
+
+ uinfo("rhport(%u) sockfd(%d) devid(%u) speed(%u)\n",
+ rhport, sockfd, devid, speed);
+
+ vdev->devid = devid;
+ vdev->speed = speed;
+ vdev->ud.tcp_socket = socket;
+ vdev->ud.status = VDEV_ST_NOTASSIGNED;
+
+ spin_unlock(&vdev->ud.lock);
+ spin_unlock(&the_controller->lock);
+ /* end the lock */
+
+ /*
+ * this function will sleep, so should be out of the lock. but, it's ok
+ * because we already marked vdev as being used. really?
+ */
+ usbip_start_threads(&vdev->ud);
+
+ rh_port_connect(rhport, speed);
+
+ return count;
+}
+static DEVICE_ATTR(attach, S_IWUSR, NULL, store_attach);
+
+static struct attribute *dev_attrs[] = {
+ &dev_attr_status.attr,
+ &dev_attr_detach.attr,
+ &dev_attr_attach.attr,
+ &dev_attr_usbip_debug.attr,
+ NULL,
+};
+
+struct attribute_group dev_attr_group = {
+ .attrs = dev_attrs,
+};
--- /dev/null
+++ b/drivers/usb/ip/vhci_tx.c
@@ -0,0 +1,239 @@
+/*
+ * Copyright (C) 2003-2008 Takahiro Hirofuchi
+ *
+ * This is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+ * USA.
+ */
+
+#include "usbip_common.h"
+#include "vhci.h"
+
+
+static void setup_cmd_submit_pdu(struct usbip_header *pdup, struct urb *urb)
+{
+ struct vhci_priv *priv = ((struct vhci_priv *)urb->hcpriv);
+ struct vhci_device *vdev = priv->vdev;
+
+ dbg_vhci_tx("URB, local devnum %u, remote devid %u\n",
+ usb_pipedevice(urb->pipe), vdev->devid);
+
+ pdup->base.command = USBIP_CMD_SUBMIT;
+ pdup->base.seqnum = priv->seqnum;
+ pdup->base.devid = vdev->devid;
+ if (usb_pipein(urb->pipe))
+ pdup->base.direction = USBIP_DIR_IN;
+ else
+ pdup->base.direction = USBIP_DIR_OUT;
+ pdup->base.ep = usb_pipeendpoint(urb->pipe);
+
+ usbip_pack_pdu(pdup, urb, USBIP_CMD_SUBMIT, 1);
+
+ if (urb->setup_packet)
+ memcpy(pdup->u.cmd_submit.setup, urb->setup_packet, 8);
+}
+
+static struct vhci_priv *dequeue_from_priv_tx(struct vhci_device *vdev)
+{
+ unsigned long flags;
+ struct vhci_priv *priv, *tmp;
+
+ spin_lock_irqsave(&vdev->priv_lock, flags);
+
+ list_for_each_entry_safe(priv, tmp, &vdev->priv_tx, list) {
+ list_move_tail(&priv->list, &vdev->priv_rx);
+ spin_unlock_irqrestore(&vdev->priv_lock, flags);
+ return priv;
+ }
+
+ spin_unlock_irqrestore(&vdev->priv_lock, flags);
+
+ return NULL;
+}
+
+
+
+static int vhci_send_cmd_submit(struct vhci_device *vdev)
+{
+ struct vhci_priv *priv = NULL;
+
+ struct msghdr msg;
+ struct kvec iov[3];
+ size_t txsize;
+
+ size_t total_size = 0;
+
+ while ((priv = dequeue_from_priv_tx(vdev)) != NULL) {
+ int ret;
+ struct urb *urb = priv->urb;
+ struct usbip_header pdu_header;
+ void *iso_buffer = NULL;
+
+ txsize = 0;
+ memset(&pdu_header, 0, sizeof(pdu_header));
+ memset(&msg, 0, sizeof(msg));
+ memset(&iov, 0, sizeof(iov));
+
+ dbg_vhci_tx("setup txdata urb %p\n", urb);
+
+
+ /* 1. setup usbip_header */
+ setup_cmd_submit_pdu(&pdu_header, urb);
+ usbip_header_correct_endian(&pdu_header, 1);
+
+ iov[0].iov_base = &pdu_header;
+ iov[0].iov_len = sizeof(pdu_header);
+ txsize += sizeof(pdu_header);
+
+ /* 2. setup transfer buffer */
+ if (!usb_pipein(urb->pipe) && urb->transfer_buffer_length > 0) {
+ iov[1].iov_base = urb->transfer_buffer;
+ iov[1].iov_len = urb->transfer_buffer_length;
+ txsize += urb->transfer_buffer_length;
+ }
+
+ /* 3. setup iso_packet_descriptor */
+ if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
+ ssize_t len = 0;
+
+ iso_buffer = usbip_alloc_iso_desc_pdu(urb, &len);
+ if (!iso_buffer) {
+ usbip_event_add(&vdev->ud,
+ SDEV_EVENT_ERROR_MALLOC);
+ return -1;
+ }
+
+ iov[2].iov_base = iso_buffer;
+ iov[2].iov_len = len;
+ txsize += len;
+ }
+
+ ret = kernel_sendmsg(vdev->ud.tcp_socket, &msg, iov, 3, txsize);
+ if (ret != txsize) {
+ uerr("sendmsg failed!, retval %d for %zd\n", ret,
+ txsize);
+ kfree(iso_buffer);
+ usbip_event_add(&vdev->ud, VDEV_EVENT_ERROR_TCP);
+ return -1;
+ }
+
+ kfree(iso_buffer);
+ dbg_vhci_tx("send txdata\n");
+
+ total_size += txsize;
+ }
+
+ return total_size;
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+static struct vhci_unlink *dequeue_from_unlink_tx(struct vhci_device *vdev)
+{
+ unsigned long flags;
+ struct vhci_unlink *unlink, *tmp;
+
+ spin_lock_irqsave(&vdev->priv_lock, flags);
+
+ list_for_each_entry_safe(unlink, tmp, &vdev->unlink_tx, list) {
+ list_move_tail(&unlink->list, &vdev->unlink_rx);
+ spin_unlock_irqrestore(&vdev->priv_lock, flags);
+ return unlink;
+ }
+
+ spin_unlock_irqrestore(&vdev->priv_lock, flags);
+
+ return NULL;
+}
+
+static int vhci_send_cmd_unlink(struct vhci_device *vdev)
+{
+ struct vhci_unlink *unlink = NULL;
+
+ struct msghdr msg;
+ struct kvec iov[3];
+ size_t txsize;
+
+ size_t total_size = 0;
+
+ while ((unlink = dequeue_from_unlink_tx(vdev)) != NULL) {
+ int ret;
+ struct usbip_header pdu_header;
+
+ txsize = 0;
+ memset(&pdu_header, 0, sizeof(pdu_header));
+ memset(&msg, 0, sizeof(msg));
+ memset(&iov, 0, sizeof(iov));
+
+ dbg_vhci_tx("setup cmd unlink, %lu \n", unlink->seqnum);
+
+
+ /* 1. setup usbip_header */
+ pdu_header.base.command = USBIP_CMD_UNLINK;
+ pdu_header.base.seqnum = unlink->seqnum;
+ pdu_header.base.devid = vdev->devid;
+ pdu_header.base.ep = 0;
+ pdu_header.u.cmd_unlink.seqnum = unlink->unlink_seqnum;
+
+ usbip_header_correct_endian(&pdu_header, 1);
+
+ iov[0].iov_base = &pdu_header;
+ iov[0].iov_len = sizeof(pdu_header);
+ txsize += sizeof(pdu_header);
+
+ ret = kernel_sendmsg(vdev->ud.tcp_socket, &msg, iov, 1, txsize);
+ if (ret != txsize) {
+ uerr("sendmsg failed!, retval %d for %zd\n", ret,
+ txsize);
+ usbip_event_add(&vdev->ud, VDEV_EVENT_ERROR_TCP);
+ return -1;
+ }
+
+
+ dbg_vhci_tx("send txdata\n");
+
+ total_size += txsize;
+ }
+
+ return total_size;
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+void vhci_tx_loop(struct usbip_task *ut)
+{
+ struct usbip_device *ud = container_of(ut, struct usbip_device, tcp_tx);
+ struct vhci_device *vdev = container_of(ud, struct vhci_device, ud);
+
+ while (1) {
+ if (signal_pending(current)) {
+ uinfo("vhci_tx signal catched\n");
+ break;
+ }
+
+ if (vhci_send_cmd_submit(vdev) < 0)
+ break;
+
+ if (vhci_send_cmd_unlink(vdev) < 0)
+ break;
+
+ wait_event_interruptible(vdev->waitq_tx,
+ (!list_empty(&vdev->priv_tx) ||
+ !list_empty(&vdev->unlink_tx)));
+
+ dbg_vhci_tx("pending urbs ?, now wake up\n");
+ }
+}
--
next prev parent reply other threads:[~2008-08-28 23:05 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20080828225248.758800945@mini.kroah.org>
2008-08-28 23:00 ` [patch 00/03] USB-IP patches greg
2008-08-28 23:00 ` [patch 01/03] USB: USB/IP: add common functions needed greg
2008-08-29 7:29 ` Oliver Neukum
2008-08-29 7:52 ` Alexander E. Patrakov
2008-08-29 14:32 ` Greg KH
2008-08-30 0:14 ` Andrew Morton
2008-08-28 23:00 ` greg [this message]
2008-08-29 8:23 ` [patch 02/03] USB: USB/IP: add client driver Oliver Neukum
2008-08-29 16:02 ` Alan Stern
2008-08-28 23:00 ` [patch 03/03] USB: USB/IP: add host driver greg
2008-08-29 5:43 ` Willy Tarreau
2008-08-28 23:06 ` [patch 00/03] USB-IP patches Arnaldo Carvalho de Melo
2008-08-30 5:50 ` Brian G. Merrell
2008-09-02 17:12 ` Greg KH
2008-09-24 1:28 ` Brian G. Merrell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080828230035.GC15014@kroah.com \
--to=greg@kroah.com \
--cc=bgmerrell@novell.com \
--cc=gregkh@suse.de \
--cc=hirofuchi@users.sourceforge.net \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.