From mboxrd@z Thu Jan 1 00:00:00 1970 From: Hamish Moffatt Date: Tue, 2 Sep 2008 10:58:37 +1000 Subject: [Buildroot] Still "Can't open /dev/tty1[2,3]", Please HELP In-Reply-To: References: Message-ID: <20080902005836.GA1637@cloud.net.au> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net On Mon, Sep 01, 2008 at 09:57:49AM +0800, Steven Woody wrote: > After guess and guess and build and burn, my rootfs still can not > boot, it always get "Can't open /dev/tty1[2,3...]" after kernel loaded > just load it. I attached the full boot message and my buildroot > .config, I hope, with best regards, someone could help me. I couldn't work out where your target_skeleton and device table are coming from based on your config. Do you have a device table, and does it have those /dev/tty1,2,3,4 devices? Maybe you could post the output of the build process. > VFS: Mounted root (cramfs filesystem) readonly. > Freeing init memory: 84K > mkdir: cannot create directory '/dev/pts': Read-only file system > mount: mounting devpts on /dev/pts failed: No such file or directory Your inittab is obviously trying to make directories in a read-only file system which isn't going to work. Not that it's related. Hamish -- Hamish Moffatt VK3SB