From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
To: linux-ide@vger.kernel.org
Cc: linux-kernel@vger.kernel.org,
Benjamin Herrenschmidt <benh@kernel.crashing.org>
Subject: [PATCH 1/2] pmac: remove superfluous pmif == NULL checks
Date: Tue, 2 Sep 2008 20:30:30 +0200 [thread overview]
Message-ID: <200809022030.30297.bzolnier@gmail.com> (raw)
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
drivers/ide/ppc/pmac.c | 39 +++++----------------------------------
1 file changed, 5 insertions(+), 34 deletions(-)
Index: b/drivers/ide/ppc/pmac.c
===================================================================
--- a/drivers/ide/ppc/pmac.c
+++ b/drivers/ide/ppc/pmac.c
@@ -430,9 +430,6 @@ pmac_ide_selectproc(ide_drive_t *drive)
pmac_ide_hwif_t *pmif =
(pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent);
- if (pmif == NULL)
- return;
-
if (drive->dn & 1)
writel(pmif->timings[1], PMAC_IDE_REG(IDE_TIMING_CONFIG));
else
@@ -452,9 +449,6 @@ pmac_ide_kauai_selectproc(ide_drive_t *d
pmac_ide_hwif_t *pmif =
(pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent);
- if (pmif == NULL)
- return;
-
if (drive->dn & 1) {
writel(pmif->timings[1], PMAC_IDE_REG(IDE_KAUAI_PIO_CONFIG));
writel(pmif->timings[3], PMAC_IDE_REG(IDE_KAUAI_ULTRA_CONFIG));
@@ -475,9 +469,6 @@ pmac_ide_do_update_timings(ide_drive_t *
pmac_ide_hwif_t *pmif =
(pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent);
- if (pmif == NULL)
- return;
-
if (pmif->kind == controller_sh_ata6 ||
pmif->kind == controller_un_ata6 ||
pmif->kind == controller_k2_ata6)
@@ -524,9 +515,6 @@ pmac_ide_set_pio_mode(ide_drive_t *drive
unsigned accessTime, recTime;
unsigned int cycle_time;
- if (pmif == NULL)
- return;
-
/* which drive is it ? */
timings = &pmif->timings[drive->dn & 1];
t = *timings;
@@ -1558,11 +1546,7 @@ pmac_ide_dma_setup(ide_drive_t *drive)
pmac_ide_hwif_t *pmif =
(pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent);
struct request *rq = HWGROUP(drive)->rq;
- u8 unit = drive->dn & 1, ata4;
-
- if (pmif == NULL)
- return 1;
- ata4 = (pmif->kind == controller_kl_ata4);
+ u8 unit = drive->dn & 1, ata4 = (pmif->kind == controller_kl_ata4);
if (!pmac_ide_build_dmatable(drive, rq)) {
ide_map_sg(drive, rq);
@@ -1616,12 +1600,8 @@ pmac_ide_dma_end (ide_drive_t *drive)
ide_hwif_t *hwif = drive->hwif;
pmac_ide_hwif_t *pmif =
(pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent);
- volatile struct dbdma_regs __iomem *dma;
+ volatile struct dbdma_regs __iomem *dma = pmif->dma_regs;
u32 dstat;
-
- if (pmif == NULL)
- return 0;
- dma = pmif->dma_regs;
drive->waiting_for_dma = 0;
dstat = readl(&dma->status);
@@ -1646,13 +1626,9 @@ pmac_ide_dma_test_irq (ide_drive_t *driv
ide_hwif_t *hwif = drive->hwif;
pmac_ide_hwif_t *pmif =
(pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent);
- volatile struct dbdma_regs __iomem *dma;
+ volatile struct dbdma_regs __iomem *dma = pmif->dma_regs;
unsigned long status, timeout;
- if (pmif == NULL)
- return 0;
- dma = pmif->dma_regs;
-
/* We have to things to deal with here:
*
* - The dbdma won't stop if the command was started
@@ -1705,14 +1681,9 @@ pmac_ide_dma_lost_irq (ide_drive_t *driv
ide_hwif_t *hwif = drive->hwif;
pmac_ide_hwif_t *pmif =
(pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent);
- volatile struct dbdma_regs __iomem *dma;
- unsigned long status;
-
- if (pmif == NULL)
- return;
- dma = pmif->dma_regs;
+ volatile struct dbdma_regs __iomem *dma = pmif->dma_regs;
+ unsigned long status = readl(&dma->status);
- status = readl(&dma->status);
printk(KERN_ERR "ide-pmac lost interrupt, dma status: %lx\n", status);
}
reply other threads:[~2008-09-02 18:33 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200809022030.30297.bzolnier@gmail.com \
--to=bzolnier@gmail.com \
--cc=benh@kernel.crashing.org \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.