All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jarod Wilson <jwilson@redhat.com>
To: Sebastian Siewior <lkml@ml.breakpoint.cc>, Janne Grunau <j@jannau.net>
Cc: linux-kernel@vger.kernel.org,
	Christoph Bartelmus <lirc@bartelmus.de>,
	Mario Limonciello <superm1@ubuntu.com>
Subject: Re: [PATCH 01/18] lirc core device driver infrastructure
Date: Tue, 9 Sep 2008 13:03:27 -0400	[thread overview]
Message-ID: <200809091303.27742.jwilson@redhat.com> (raw)
In-Reply-To: <20080909074018.GA26076@Chamillionaire.breakpoint.cc>

On Tuesday 09 September 2008 03:40:18 Sebastian Siewior wrote:
> >diff --git a/drivers/input/lirc/Makefile b/drivers/input/lirc/Makefile
> >new file mode 100644
> >index 0000000..cdb4c45
> >--- /dev/null
> >+++ b/drivers/input/lirc/Makefile
> >@@ -0,0 +1,8 @@
> >+# Makefile for the lirc drivers.
> >+#
> >+
> >+# Each configuration option enables a list of files.
> >+
> >+EXTRA_CFLAGS =-DIRCTL_DEV_MAJOR=61 -DLIRC_SERIAL_TRANSMITTER -I$(src)
>
> Do you rely on this specific major? Since your daemon opens /dev/lirc0
> you don't need a fixed major do you?

Good question. Quite honestly, I'm not sure. Christoph?

> LIRC_SERIAL_TRANSMITTER is used in patch 2 and just to enable a module
> options. Since it is always the case, please remove it.
> I haven't found the source of $src. It is probably a relic.

Janne took care of these. Heck, he's already replied, I'll just leave out the 
parts he already replied to...

> >+++ b/drivers/input/lirc/lirc_dev.c
> >@@ -0,0 +1,809 @@
> >+/*
> >+ * LIRC base driver
> >+ *
> >+ * (L) by Artur Lipowski <alipowski@interia.pl>
>
> Is that L here on purpose?

Historical. I think it is supposed to signify that this was originally 
licensed and written by Artur, but simply removing "(L) " is fine (here and in 
lirc_dev.h).

> >+#include <linux/smp_lock.h>
>
> if you need this than you use the BKL back. As far as I remember
> the ioctl() handler in kernel core no longer takes the BKL and I don't
> see any locking in irctl_ioctl().


> >+/*  helper function
> >+ *  initializes the irctl structure
> >+ */
>
> For all comments above functions:
> - Please use the default comment style.

Apologies, I started on that, didn't finish, then forgot about it. Will do.

> - don't comment obvious things
> - please use kernel doc if
> - please comment the prototypes but the actual function.

Working on this too.

> >+	bytes_in_key = p->code_length/8 + (p->code_length%8 ? 1 : 0);
>
> did you actually pass checkpatch.pl ?

Yeah, but now that you point that out, I'm not sure how... :)

Taken care of by simply using BITS_TO_LONG() instead.

> >+EXPORT_SYMBOL(lirc_register_plugin);
>
> Is EXPORT_SYMBOL_GPL() possible?

Should be, I'm definitely not aware of any non-GPL users.

> >+EXPORT_SYMBOL(lirc_unregister_plugin);

Ditto.

> >+/* ----------------------------------------------------------------------
> > */
>
> I hate those

Me too. Gone.

-- 
Jarod Wilson
jarod@redhat.com


  parent reply	other threads:[~2008-09-09 17:06 UTC|newest]

Thread overview: 94+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-09-09  4:05 [PATCH 0/18] linux infrared remote control drivers Jarod Wilson
2008-09-09  4:05 ` [PATCH 01/18] lirc core device driver infrastructure Jarod Wilson
2008-09-09  4:05   ` [PATCH 02/18] lirc serial port receiver/transmitter device driver Jarod Wilson
2008-09-09  4:05     ` [PATCH 03/18] lirc driver for 1st-gen Media Center Ed. USB IR transceivers Jarod Wilson
2008-09-09  4:05       ` [PATCH 04/18] lirc driver for 2nd-gen and later " Jarod Wilson
2008-09-09  4:05         ` [PATCH 05/18] lirc driver for i2c-based IR receivers Jarod Wilson
2008-09-09  4:05           ` [PATCH 06/18] lirc driver for the ATI USB RF remote receiver Jarod Wilson
2008-09-09  4:05             ` [PATCH 07/18] lirc driver for the CommandIR USB Transceiver Jarod Wilson
2008-09-09  4:05               ` [PATCH 08/18] lirc driver for the Soundgraph IMON IR Receivers Jarod Wilson
2008-09-09  4:05                 ` [PATCH 09/18] lirc driver for the Streamzap PC Receiver Jarod Wilson
2008-09-09  4:05                   ` [PATCH 10/18] lirc driver for Igor Cesko's USB IR receiver Jarod Wilson
2008-09-09  4:05                     ` [PATCH 11/18] lirc driver for the Technotrend " Jarod Wilson
2008-09-09  4:05                       ` [PATCH 12/18] lirc driver for the Sasem OnAir and Dign HV5 receivers Jarod Wilson
2008-09-09  4:05                         ` [PATCH 13/18] lirc driver for ITE8709 CIR port receiver Jarod Wilson
2008-09-09  4:05                           ` [PATCH 14/18] lirc driver for the ITE IT87xx CIR Port receivers Jarod Wilson
2008-09-09  4:06                             ` [PATCH 15/18] lirc driver for the SIR IrDA port Jarod Wilson
2008-09-09  4:06                               ` [PATCH 16/18] lirc driver for the IR interface on BT829-based hardware Jarod Wilson
2008-09-09  4:06                                 ` [PATCH 17/18] lirc driver for homebrew parallel port receivers Jarod Wilson
2008-09-09  4:06                                   ` [PATCH 18/18] lirc driver for the zilog/haupauge IR transceiver Jarod Wilson
2008-09-09  4:06                                     ` Jarod Wilson
2008-09-11 15:22                   ` [PATCH 09/18] lirc driver for the Streamzap PC Receiver Jonathan Corbet
2008-09-10 21:02                 ` [PATCH 08/18] lirc driver for the Soundgraph IMON IR Receivers Jonathan Corbet
2008-09-10 21:23                   ` Janne Grunau
2008-09-11  3:22                     ` Jarod Wilson
2008-09-22 21:47                   ` Jarod Wilson
2008-09-24 20:21                     ` Jarod Wilson
2008-09-10 17:09               ` [PATCH 07/18] lirc driver for the CommandIR USB Transceiver Jonathan Corbet
2008-09-11 18:24                 ` Christoph Bartelmus
     [not found]                   ` <1221159005.13683.34.camel@minimatt>
2008-09-11 19:03                     ` Jarod Wilson
2008-09-11 19:14                     ` Janne Grunau
2008-09-25 15:21                 ` Jarod Wilson
2008-09-10  9:58             ` [PATCH 06/18] lirc driver for the ATI USB RF remote receiver Ville Syrjälä
2008-09-10 13:05               ` Jarod Wilson
2008-09-10 13:14                 ` Christoph Hellwig
2008-09-10 13:37                   ` Jon Smirl
2008-09-10 14:30                     ` Dmitry Torokhov
2008-09-10 13:44                   ` Janne Grunau
2008-09-10 14:13                     ` Jarod Wilson
2008-09-10 14:19                     ` Christoph Hellwig
2008-09-10 14:08                 ` Ville Syrjälä
2008-09-10 14:37                   ` Dmitry Torokhov
2008-09-09  4:13           ` [PATCH 05/18] lirc driver for i2c-based IR receivers Jarod Wilson
2008-09-10 15:42           ` Jonathan Corbet
2008-09-09 23:30         ` [PATCH 04/18] lirc driver for 2nd-gen and later Media Center Ed. USB IR transceivers Jonathan Corbet
2008-09-10  0:36           ` Janne Grunau
2008-09-11  9:21           ` Adrian Bunk
2008-09-09 19:21       ` [PATCH 03/18] lirc driver for 1st-gen " Jonathan Corbet
2008-09-09 23:59         ` Janne Grunau
2008-09-10  1:39           ` Jarod Wilson
2008-09-10  0:04         ` Janne Grunau
2008-09-09 16:14     ` [PATCH 02/18] lirc serial port receiver/transmitter device driver Jonathan Corbet
2008-09-09 19:51       ` Stefan Lippers-Hollmann
2008-09-09 19:56         ` Jarod Wilson
2008-09-10 17:40       ` Jarod Wilson
2008-09-09  7:40   ` [PATCH 01/18] lirc core device driver infrastructure Sebastian Siewior
2008-09-09  9:53     ` Janne Grunau
2008-09-09 12:33       ` Sebastian Siewior
2008-09-09 13:10         ` Janne Grunau
2008-09-11 16:41       ` Christoph Bartelmus
2008-09-09 11:13     ` Alan Cox
2008-09-09 13:27     ` Stefan Richter
2008-09-09 17:03     ` Jarod Wilson [this message]
2008-09-11 18:30       ` Christoph Bartelmus
2008-09-11 19:09         ` Jarod Wilson
2008-09-13  7:21           ` Christoph Bartelmus
2008-09-09  9:46   ` Andi Kleen
2008-09-09 11:35     ` Janne Grunau
2008-09-09 13:03       ` Andi Kleen
2008-09-09 13:20         ` Janne Grunau
2008-09-12 16:46           ` Greg KH
2008-09-09 13:01   ` Christoph Hellwig
2008-09-10 12:24     ` Janne Grunau
2008-09-10 12:29       ` Christoph Hellwig
2008-09-10 12:45         ` Janne Grunau
2008-09-11 18:03       ` Christoph Bartelmus
2008-09-11 19:18         ` Janne Grunau
2008-09-12  0:16     ` Janne Grunau
2008-09-12  8:33       ` Christoph Hellwig
2008-09-12 14:51         ` Jarod Wilson
2008-09-09 15:33   ` Jonathan Corbet
2008-09-12  0:12     ` Janne Grunau
2008-09-10 13:08   ` Dmitry Torokhov
2008-09-11  8:47     ` Gerd Hoffmann
2008-09-11 21:28       ` Maxim Levitsky
2008-09-13  7:20         ` Christoph Bartelmus
2008-09-12  4:44       ` Dmitry Torokhov
2008-09-09  4:36 ` [PATCH 0/18] linux infrared remote control drivers Chris Wedgwood
2008-09-09  7:06 ` Alexey Dobriyan
2008-09-09  8:32   ` Janne Grunau
2008-09-09 12:46 ` Christoph Hellwig
2008-09-09 15:23   ` Jarod Wilson
2008-09-09 18:27     ` Lennart Sorensen
2008-09-09 18:34       ` Jarod Wilson
2008-09-09 15:34   ` Jon Smirl

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=200809091303.27742.jwilson@redhat.com \
    --to=jwilson@redhat.com \
    --cc=j@jannau.net \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lirc@bartelmus.de \
    --cc=lkml@ml.breakpoint.cc \
    --cc=superm1@ubuntu.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.