From: Dave Chinner <david@fromorbit.com>
To: Lachlan McIlroy <lachlan@sgi.com>
Cc: xfs-dev <xfs-dev@sgi.com>, xfs-oss <xfs@oss.sgi.com>
Subject: Re: [PATCH] Re-dirty pages on I/O error
Date: Sat, 13 Sep 2008 14:19:30 +1000 [thread overview]
Message-ID: <20080913041930.GC5811@disturbed> (raw)
In-Reply-To: <48C8D8CD.7050508@sgi.com>
On Thu, Sep 11, 2008 at 06:37:33PM +1000, Lachlan McIlroy wrote:
> If we get an error in xfs_page_state_convert() - and it's not EAGAIN - then
> we throw away the dirty page without converting the delayed allocation. This
> leaves delayed allocations that can never be removed and confuses code that
> expects a flush of the file to clear them. We need to re-dirty the page on
> error so we can try again later or report that the flush failed.
>
> --- a/fs/xfs/linux-2.6/xfs_aops.c 2008-09-11 16:32:11.000000000 +1000
> +++ b/fs/xfs/linux-2.6/xfs_aops.c 2008-09-11 15:44:09.000000000 +1000
> @@ -1147,16 +1147,6 @@ error:
> if (iohead)
> xfs_cancel_ioend(iohead);
>
> - /*
> - * If it's delalloc and we have nowhere to put it,
> - * throw it away, unless the lower layers told
> - * us to try again.
> - */
> - if (err != -EAGAIN) {
> - if (!unmapped)
> - block_invalidatepage(page, 0);
> - ClearPageUptodate(page);
> - }
> return err;
> }
So we keep dirty pages around that we can't write back?
If we are in a low memory situation and the block device
has gone bad, that will prevent memory reclaim from making
progress.
i.e. if we have a bad disk, a user can now take down the system
by running it out of clean memory....
The EAGAIN case is for when we can't get the locks we
need during non-blocking writeback, which is a common case if
there is concurrent writes to this inode....
> @@ -1216,8 +1206,11 @@ xfs_vm_writepage(
> * then mark the page dirty again and leave the page
> * as is.
> */
> - if (current_test_flags(PF_FSTRANS) && need_trans)
> - goto out_fail;
> + if (current_test_flags(PF_FSTRANS) && need_trans) {
> + redirty_page_for_writepage(wbc, page);
> + unlock_page(page);
> + return -EAGAIN;
> + }
Should not return an error here - the redirty_page_for_writepage()
call effective says "can't do this right away, but no error
needs to be reported because it can be written again later".
Happens all the time with non-blocking writes.
> @@ -1231,20 +1224,14 @@ xfs_vm_writepage(
> * to real space and flush out to disk.
> */
> error = xfs_page_state_convert(inode, page, wbc, 1, unmapped);
> - if (error == -EAGAIN)
> - goto out_fail;
> - if (unlikely(error < 0))
> - goto out_unlock;
>
> - return 0;
> + if (error < 0) {
> + redirty_page_for_writepage(wbc, page);
> + unlock_page(page);
> + return error;
> + }
That needs the EAGAIN exception - that's not an error.
For EIO, though, we should really be invalidating the
page like we currently do. However, it should be silent as
per the current behaviour - a rate-limited log warning is
really needed here...
Cheers,
Dave.
--
Dave Chinner
david@fromorbit.com
next prev parent reply other threads:[~2008-09-13 4:18 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-09-11 8:37 [PATCH] Re-dirty pages on I/O error Lachlan McIlroy
2008-09-11 10:33 ` Christoph Hellwig
2008-09-11 21:21 ` Eric Sandeen
2008-09-12 6:44 ` Lachlan McIlroy
2008-09-12 13:17 ` Eric Sandeen
2008-09-12 6:04 ` Lachlan McIlroy
2008-09-13 4:19 ` Dave Chinner [this message]
2008-09-15 3:22 ` Lachlan McIlroy
2008-09-16 4:01 ` Dave Chinner
2008-09-16 6:30 ` Lachlan McIlroy
-- strict thread matches above, loose matches on Subject: below --
2009-02-10 1:48 Lachlan McIlroy
2009-02-10 10:01 ` Dave Chinner
2009-02-10 23:33 ` Lachlan McIlroy
2009-02-15 20:05 ` Christoph Hellwig
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080913041930.GC5811@disturbed \
--to=david@fromorbit.com \
--cc=lachlan@sgi.com \
--cc=xfs-dev@sgi.com \
--cc=xfs@oss.sgi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.