All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jay Cliburn <jacliburn@bellsouth.net>
To: adobriyan@gmail.com
Cc: csnook@redhat.com, netdev@vger.kernel.org
Subject: Re: atl1: WARNING at net/sched/sch_generic.c:221
Date: Sun, 14 Sep 2008 18:17:14 -0500	[thread overview]
Message-ID: <20080914181714.34935d9c@osprey.hogchain.net> (raw)
In-Reply-To: <20080821115849.GA2126@x200.localdomain>

On Thu, 21 Aug 2008 15:58:49 +0400
adobriyan@gmail.com wrote:

> This message happens more or less every reboot, sometimes cable
> unplug/plug is needed to restore connectivity, otherwise card is
> working fine.
> 
> 
> [   22.570010] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
> [   26.570011] NET: Registered protocol family 10
> [   37.551934] eth0: no IPv6 routers present
> 
> 	[rebooted box which is directly connected to a box with atl1]
> 
> [ 2078.740004] atl1 0000:03:00.0: eth0 link is down
> [ 2080.790004] atl1 0000:03:00.0: eth0 link is up 1000 Mbps full
> duplex [ 2086.049998] NETDEV WATCHDOG: eth0 (atl1): transmit timed out
> [ 2086.050004] ------------[ cut here ]------------
> [ 2086.050004] WARNING: at net/sched/sch_generic.c:221
[...]

Alexey,

Can you please try this patch?

diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c
index e23ce77..e00a986 100644
--- a/drivers/net/atlx/atl1.c
+++ b/drivers/net/atlx/atl1.c
@@ -2642,6 +2642,7 @@ static void atl1_down(struct atl1_adapter *adapter)
 {
 	struct net_device *netdev = adapter->netdev;
 
+	netif_stop_queue(netdev);
 	del_timer_sync(&adapter->watchdog_timer);
 	del_timer_sync(&adapter->phy_config_timer);
 	adapter->phy_timer_pending = false;
@@ -2655,7 +2656,6 @@ static void atl1_down(struct atl1_adapter *adapter)
 	adapter->link_speed = SPEED_0;
 	adapter->link_duplex = -1;
 	netif_carrier_off(netdev);
-	netif_stop_queue(netdev);
 
 	atl1_clean_tx_ring(adapter);
 	atl1_clean_rx_ring(adapter);
@@ -2724,6 +2724,8 @@ static int atl1_open(struct net_device *netdev)
 	struct atl1_adapter *adapter = netdev_priv(netdev);
 	int err;
 
+	netif_carrier_off(netdev);
+
 	/* allocate transmit descriptors */
 	err = atl1_setup_ring_resources(adapter);
 	if (err)
diff --git a/drivers/net/atlx/atlx.c b/drivers/net/atlx/atlx.c
index b3e7fcf..3cc9d10 100644
--- a/drivers/net/atlx/atlx.c
+++ b/drivers/net/atlx/atlx.c
@@ -105,7 +105,6 @@ static void atlx_check_for_link(struct atlx_adapter *adapter)
 				netdev->name);
 			adapter->link_speed = SPEED_0;
 			netif_carrier_off(netdev);
-			netif_stop_queue(netdev);
 		}
 	}
 	schedule_work(&adapter->link_chg_task);
-- 
1.5.5.1

  parent reply	other threads:[~2008-09-14 23:17 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-08-21 11:58 atl1: WARNING at net/sched/sch_generic.c:221 adobriyan
2008-08-21 11:59 ` David Miller
2008-08-21 12:04   ` adobriyan
2008-08-21 12:08     ` David Miller
2008-09-14 19:26       ` Jay Cliburn
2008-09-14 19:58         ` Stephen Hemminger
2008-09-14 23:56         ` David Miller
2008-09-15  0:11           ` Jay Cliburn
2008-09-15  3:14           ` Jeff Garzik
2008-08-22  2:00 ` Jay Cliburn
2008-08-22 21:50   ` Jay Cliburn
2008-09-14 23:17 ` Jay Cliburn [this message]
2008-09-15 22:45   ` Alexey Dobriyan
2008-09-16  1:44     ` Jay Cliburn
2008-09-17  7:44       ` Alexey Dobriyan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20080914181714.34935d9c@osprey.hogchain.net \
    --to=jacliburn@bellsouth.net \
    --cc=adobriyan@gmail.com \
    --cc=csnook@redhat.com \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.