sky2 hangs

[Greg Fitzgerald <netzdamon@gmail.com>]

Hope I am sending this to the right place. Have the sky2 network card.
Internet will die out randomly, re-probing the sky2 module usually solves
the problem. According to dmesg the receiver is hanging.

sky2 eth0: hung mac 0:81 fifo 3 (86:89)
sky2 eth0: receiver hang detected
sky2 eth0: disabling interface
sky2 eth0: enabling interface
sky2 eth0: Link is up at 10 Mbps, half duplex, flow control none
sky2 eth0: hung mac 0:11 fifo 194 (51:45)
sky2 eth0: receiver hang detected

This top half happens 3 or 4 times, then I'll start to get this extra
output in dmesg after that.

sky2 eth0: disabling interface
ACPI: PCI interrupt for device 0000:02:00.0 disabled
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:02:00.0 to 64
sky2 0000:02:00.0: v1.21 addr 0xcdefc000 irq 19 Yukon-EC (0xb6) rev 2
sky2 eth0: addr 00:17:31:9b:ca:89
sky2 eth0: enabling interface
sky2 eth0: Link is up at 10 Mbps, half duplex, flow control none
sky2 eth0: disabling interface
sky2 eth0: enabling interface
sky2 eth0: Link is up at 10 Mbps, half duplex, flow control none

Some where in between all this, it actually gets to the point where I
totally loose my connection. Sometimes it will come back up and I'm
perfectly fine.

If I can provide any other information please let me know.

Oh, been having this problem for some time now. Current version of the
my kernel is 2.6.26.5.

--Greg