From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jean Delvare Date: Fri, 26 Sep 2008 07:10:28 +0000 Subject: Re: [lm-sensors] Intel DG45FC Message-Id: <20080926091028.56d048ef@hyperion.delvare> List-Id: References: <7bccedf10809181658o18aa47bbt46480ca2a67b1ac9@mail.gmail.com> In-Reply-To: <7bccedf10809181658o18aa47bbt46480ca2a67b1ac9@mail.gmail.com> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lm-sensors@vger.kernel.org Hi Anthony, On Thu, 25 Sep 2008 17:13:17 -0700, Anthony Arobone wrote: > Finally got the board all hooked up again. I've attached a text file with > all the output I could think of. Notice the dmesg warning when modprobing > lm85. > (...) > lm85-i2c-0-2e > Adapter: SMBus I801 adapter at f000 > V1.5: +0.00 V (min = +0.00 V, max = +3.32 V) > VCore: +0.00 V (min = +0.00 V, max = +2.99 V) > V3.3: +0.00 V (min = +0.00 V, max = +4.38 V) > V5: +0.00 V (min = +0.00 V, max = +6.64 V) > V12: +0.00 V (min = +0.00 V, max = +15.94 V) > CPU_Fan: 0 RPM (min = 0 RPM) ALARM > fan2: 0 RPM (min = 0 RPM) ALARM > fan3: 0 RPM (min = 0 RPM) ALARM > fan4: 0 RPM (min = 0 RPM) ALARM > CPU Temp: +0 C (low = -127 C, high = +127 C) > Board Temp: > +0 C (low = -127 C, high = +127 C) > Remote Temp: > +0 C (low = -127 C, high = +127 C) > CPU_PWM: 255 > Fan2_PWM: 255 > Fan3_PWM: 255 > vid: +2.050 V (VRM Version 8.2) As I suspected, this is exactly the same case as in ticket #2182: http://www.lm-sensors.org/ticket/2182 I've updated wiki/Devices to mention this known issue. At this point we have no idea how to solve it. Does your BIOS display (non-zero) hardware monitoring information? -- Jean Delvare _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors