All of lore.kernel.org
 help / color / mirror / Atom feed
From: Rusty Russell <rusty@rustcorp.com.au>
To: Ingo Molnar <mingo@elte.hu>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>,
	linux-kernel@vger.kernel.org, Mike Travis <travis@sgi.com>
Subject: [PATCH] x86: clean up speedctep-centrino and reduce cpumask_t usage
Date: Wed, 1 Oct 2008 09:01:54 +1000	[thread overview]
Message-ID: <200810010901.55127.rusty@rustcorp.com.au> (raw)

1) The #ifdef CONFIG_HOTPLUG_CPU seems unnecessary these days.
2) The loop can simply skip over offline cpus, rather than creating a tmp mask.
3) set_mask is set to either a single cpu or all online cpus in a policy.
   Since it's just used for set_cpus_allowed(), any offline cpus in a policy
   don't matter, so we can just use cpumask_of_cpu() or the policy->cpus.

Note: untested, since I don't have such a system.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

diff -r dc205c205c8a arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c
--- a/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c	Sun Sep 28 18:04:20 2008 +1000
+++ b/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c	Sun Sep 28 18:05:58 2008 +1000
@@ -459,9 +459,7 @@ static int centrino_verify (struct cpufr
  * Sets a new CPUFreq policy.
  */
 struct allmasks {
-	cpumask_t		online_policy_cpus;
 	cpumask_t		saved_mask;
-	cpumask_t		set_mask;
 	cpumask_t		covered_cpus;
 };
 
@@ -475,9 +473,7 @@ static int centrino_target (struct cpufr
 	int			retval = 0;
 	unsigned int		j, k, first_cpu, tmp;
 	CPUMASK_ALLOC(allmasks);
-	CPUMASK_PTR(online_policy_cpus, allmasks);
 	CPUMASK_PTR(saved_mask, allmasks);
-	CPUMASK_PTR(set_mask, allmasks);
 	CPUMASK_PTR(covered_cpus, allmasks);
 
 	if (unlikely(allmasks == NULL))
@@ -497,30 +493,28 @@ static int centrino_target (struct cpufr
 		goto out;
 	}
 
-#ifdef CONFIG_HOTPLUG_CPU
-	/* cpufreq holds the hotplug lock, so we are safe from here on */
-	cpus_and(*online_policy_cpus, cpu_online_map, policy->cpus);
-#else
-	*online_policy_cpus = policy->cpus;
-#endif
-
 	*saved_mask = current->cpus_allowed;
 	first_cpu = 1;
 	cpus_clear(*covered_cpus);
-	for_each_cpu_mask_nr(j, *online_policy_cpus) {
+	for_each_cpu_mask_nr(j, policy->cpus) {
+		const cpumask_t *mask;
+
+		/* cpufreq holds the hotplug lock, so we are safe here */
+		if (!cpu_online(j))
+			continue;
+
 		/*
 		 * Support for SMP systems.
 		 * Make sure we are running on CPU that wants to change freq
 		 */
-		cpus_clear(*set_mask);
 		if (policy->shared_type == CPUFREQ_SHARED_TYPE_ANY)
-			cpus_or(*set_mask, *set_mask, *online_policy_cpus);
+			mask = &policy->cpus;
 		else
-			cpu_set(j, *set_mask);
+			mask = &cpumask_of_cpu(j);
 
-		set_cpus_allowed_ptr(current, set_mask);
+		set_cpus_allowed_ptr(current, mask);
 		preempt_disable();
-		if (unlikely(!cpu_isset(smp_processor_id(), *set_mask))) {
+		if (unlikely(!cpu_isset(smp_processor_id(), *mask))) {
 			dprintk("couldn't limit to CPUs in this domain\n");
 			retval = -EAGAIN;
 			if (first_cpu) {
@@ -548,7 +542,9 @@ static int centrino_target (struct cpufr
 			dprintk("target=%dkHz old=%d new=%d msr=%04x\n",
 				target_freq, freqs.old, freqs.new, msr);
 
-			for_each_cpu_mask_nr(k, *online_policy_cpus) {
+			for_each_cpu_mask_nr(k, policy->cpus) {
+				if (!cpu_online(k))
+					continue;
 				freqs.cpu = k;
 				cpufreq_notify_transition(&freqs,
 					CPUFREQ_PRECHANGE);
@@ -571,7 +567,9 @@ static int centrino_target (struct cpufr
 		preempt_enable();
 	}
 
-	for_each_cpu_mask_nr(k, *online_policy_cpus) {
+	for_each_cpu_mask_nr(k, policy->cpus) {
+		if (!cpu_online(k))
+			continue;
 		freqs.cpu = k;
 		cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
 	}
@@ -584,18 +582,17 @@ static int centrino_target (struct cpufr
 		 * Best effort undo..
 		 */
 
-		if (!cpus_empty(*covered_cpus))
-			for_each_cpu_mask_nr(j, *covered_cpus) {
-				set_cpus_allowed_ptr(current,
-						     &cpumask_of_cpu(j));
-				wrmsr(MSR_IA32_PERF_CTL, oldmsr, h);
-			}
+		for_each_cpu_mask_nr(j, *covered_cpus) {
+			set_cpus_allowed_ptr(current, &cpumask_of_cpu(j));
+			wrmsr(MSR_IA32_PERF_CTL, oldmsr, h);
+		}
 
 		tmp = freqs.new;
 		freqs.new = freqs.old;
 		freqs.old = tmp;
-		for_each_cpu_mask_nr(j, *online_policy_cpus) {
-			freqs.cpu = j;
+		for_each_cpu_mask_nr(j, policy->cpus) {
+			if (!cpu_online(j))
+				continue;
 			cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
 			cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
 		}

             reply	other threads:[~2008-09-30 23:03 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-09-30 23:01 Rusty Russell [this message]
2008-10-01  6:44 ` [PATCH] x86: clean up speedctep-centrino and reduce cpumask_t usage Ingo Molnar
2008-10-02  5:05   ` Rusty Russell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=200810010901.55127.rusty@rustcorp.com.au \
    --to=rusty@rustcorp.com.au \
    --cc=jeremy@goop.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mingo@elte.hu \
    --cc=travis@sgi.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.