Re: ide dvd burner detected as ide-tape

[Thomas Drillich <th@drillich.com>]

I did some more research on the LG GH22LP20 DVD burner
 http://www.lge.com/products/model/detail/gh22lp20.jhtml

>udevinfo -a -p /sys/class/ide_port/ide0/device/0.0
  looking at device '/devices/pci0000:00/0000:00:1f.0/ide0/0.0':
    KERNEL="0.0"
    SUBSYSTEM="ide"
    DRIVER=""
    ATTR{media}="tape"
    ATTR{drivename}="hda"
    ATTR{modalias}="ide:m-tape"
    ATTR{model}="HL)DP-ST@V@-RAI CH22HP20"
    ATTR{firmware}="1.00"
    ATTR{serial}=""

>udevadm test /sys/class/ide_port/ide0/device/0.0  
-- snipp
import_uevent_var: import into environment: 'PHYSDEVBUS=ide'
import_uevent_var: import into environment: 'MEDIA=tape'
import_uevent_var: import into environment: 'DRIVENAME=hda'
import_uevent_var: import into environment: 'MODALIAS=ide:m-tape'
udevtest: looking at device '/class/ide_port/ide0/device/0.0' from 
subsystem 'ide'
udevtest: run: '/sbin/modprobe --use-blacklist ide:m-tape'
udevtest: run: '/sbin/modprobe ide-scsi'
udevtest: run: 'socket:/org/freedesktop/hal/udev_event'
udevtest: run: 'socket:@/org/kernel/udev/monitor'
--end snipp


could you help me to write a correct rule ?
-- 
mit freundlichem Gruss -- regards

Thomas Drillich