From: "J.A. Magallón" <jamagallon@ono.com>
To: Linux-Kernel <linux-kernel@vger.kernel.org>,
"Yinghai Lu" <yinghai@kernel.org>
Subject: Re: Strange mtrrs in Aspire One
Date: Sat, 4 Oct 2008 15:22:35 +0200 [thread overview]
Message-ID: <20081004152235.387a6f61@werewolf.home> (raw)
In-Reply-To: <86802c440809291805r71877ad1wc68525c1ca0603e1@mail.gmail.com>
On Mon, 29 Sep 2008 18:05:51 -0700, "Yinghai Lu" <yinghai@kernel.org> wrote:
> On Mon, Sep 29, 2008 at 4:57 PM, J.A. Magallón <jamagallon@ono.com> wrote:
> > Hi all...
> >
> > My aspire one is giving some strange MTRR settings with rc7-git5 (and
> > prevous kernels, but that is what I run now...):
> >
> > one:~> cat /proc/mtrr
> > reg00: base=0xfffe0000 (4095MB), size= 128KB: write-protect, count=1
> > reg01: base=0xfffc0000 (4095MB), size= 128KB: uncachable, count=1
>
> could make mtrr_cleanup to support 128K gran_size
>
> > reg02: base=0x00000000 ( 0MB), size= 256MB: write-back, count=1
> > reg03: base=0x10000000 ( 256MB), size= 256MB: write-back, count=1
> > reg04: base=0x1f800000 ( 504MB), size= 8MB: uncachable, count=1
> > reg05: base=0x1f600000 ( 502MB), size= 2MB: uncachable, count=1
> > reg06: base=0x1f500000 ( 501MB), size= 1MB: uncachable, count=1
>
> > reg07: base=0x00000000 ( 0MB), size= 128KB: uncachable, count=1
> ..
> > BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
>
> last entry is really sick...
>
I have applied the patches you have posted in other threads, and this
give a very strange result. The mtrr cleanup did nothing, and I had to put
some printk's all around.
The thing is that the cleanup stops here:
printk(KERN_INFO "GO 6 %d\n",num[MTRR_TYPE_WRBACK] + num[MTRR_TYPE_UNCACHABL
printk(KERN_INFO "GO 6 %d\n",num_var_ranges - num[MTRR_NUM_TYPES]);
/* check if we only had WB and UC */
if (num[MTRR_TYPE_WRBACK] + num[MTRR_TYPE_UNCACHABLE] !=
num_var_ranges - num[MTRR_NUM_TYPES])
return 0;
Result is:
GO 6 7
GO 6 8
If I comment the test, it can not found a suitable setup.
Full dmesg below.
Linux version 2.6.26-jam15 (root@one.home) (gcc version 4.3.2 (GCC) ) #4 SMP PREEMPT Sat Oct 4 10:57:32 CEST 2008
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001f376000 (usable)
BIOS-e820: 000000001f376000 - 000000001f3bf000 (reserved)
BIOS-e820: 000000001f3bf000 - 000000001f46d000 (usable)
BIOS-e820: 000000001f46d000 - 000000001f4bf000 (ACPI NVS)
BIOS-e820: 000000001f4bf000 - 000000001f4f0000 (usable)
BIOS-e820: 000000001f4f0000 - 000000001f4ff000 (ACPI data)
BIOS-e820: 000000001f4ff000 - 000000001f500000 (usable)
BIOS-e820: 000000001f500000 - 0000000020000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
last_pfn = 0x1f500 max_arch_pfn = 0x100000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
GO 1 1 1
GO 2 0
GO 3
GO 4 8
GO 5 5
GO 6 7
GO 6 8
total RAM coverred: 500M
*BAD*gran_size: 64K chunk_size: 64K num_reg: 7 lose cover RAM: -128K
*BAD*gran_size: 64K chunk_size: 128K num_reg: 7 lose cover RAM: -128K
*BAD*gran_size: 64K chunk_size: 256K num_reg: 7 lose cover RAM: -128K
*BAD*gran_size: 64K chunk_size: 512K num_reg: 7 lose cover RAM: -128K
*BAD*gran_size: 64K chunk_size: 1M num_reg: 7 lose cover RAM: -128K
*BAD*gran_size: 64K chunk_size: 2M num_reg: 7 lose cover RAM: -128K
*BAD*gran_size: 64K chunk_size: 4M num_reg: 7 lose cover RAM: -128K
*BAD*gran_size: 64K chunk_size: 8M num_reg: 8 lose cover RAM: -128K
*BAD*gran_size: 64K chunk_size: 16M num_reg: 7 lose cover RAM: -128K
*BAD*gran_size: 64K chunk_size: 32M num_reg: 8 lose cover RAM: -128K
*BAD*gran_size: 64K chunk_size: 64M num_reg: 7 lose cover RAM: -128K
*BAD*gran_size: 64K chunk_size: 128M num_reg: 6 lose cover RAM: -128K
*BAD*gran_size: 64K chunk_size: 256M num_reg: 5 lose cover RAM: -128K
*BAD*gran_size: 64K chunk_size: 512M num_reg: 4 lose cover RAM: -128K
*BAD*gran_size: 64K chunk_size: 1G num_reg: 7 lose cover RAM: -128K
*BAD*gran_size: 64K chunk_size: 2G num_reg: 7 lose cover RAM: -128K
*BAD*gran_size: 64K chunk_size: 4G num_reg: 7 lose cover RAM: -128K
*BAD*gran_size: 128K chunk_size: 128K num_reg: 7 lose cover RAM: -128K
*BAD*gran_size: 128K chunk_size: 256K num_reg: 7 lose cover RAM: -128K
*BAD*gran_size: 128K chunk_size: 512K num_reg: 7 lose cover RAM: -128K
*BAD*gran_size: 128K chunk_size: 1M num_reg: 7 lose cover RAM: -128K
*BAD*gran_size: 128K chunk_size: 2M num_reg: 7 lose cover RAM: -128K
*BAD*gran_size: 128K chunk_size: 4M num_reg: 7 lose cover RAM: -128K
*BAD*gran_size: 128K chunk_size: 8M num_reg: 8 lose cover RAM: -128K
*BAD*gran_size: 128K chunk_size: 16M num_reg: 7 lose cover RAM: -128K
*BAD*gran_size: 128K chunk_size: 32M num_reg: 8 lose cover RAM: -128K
*BAD*gran_size: 128K chunk_size: 64M num_reg: 7 lose cover RAM: -128K
*BAD*gran_size: 128K chunk_size: 128M num_reg: 6 lose cover RAM: -128K
*BAD*gran_size: 128K chunk_size: 256M num_reg: 5 lose cover RAM: -128K
*BAD*gran_size: 128K chunk_size: 512M num_reg: 4 lose cover RAM: -128K
*BAD*gran_size: 128K chunk_size: 1G num_reg: 7 lose cover RAM: -128K
*BAD*gran_size: 128K chunk_size: 2G num_reg: 7 lose cover RAM: -128K
*BAD*gran_size: 128K chunk_size: 4G num_reg: 7 lose cover RAM: -128K
*BAD*gran_size: 256K chunk_size: 256K num_reg: 7 lose cover RAM: -128K
*BAD*gran_size: 256K chunk_size: 512K num_reg: 7 lose cover RAM: -128K
*BAD*gran_size: 256K chunk_size: 1M num_reg: 7 lose cover RAM: -128K
*BAD*gran_size: 256K chunk_size: 2M num_reg: 7 lose cover RAM: -128K
*BAD*gran_size: 256K chunk_size: 4M num_reg: 7 lose cover RAM: -128K
*BAD*gran_size: 256K chunk_size: 8M num_reg: 8 lose cover RAM: -128K
*BAD*gran_size: 256K chunk_size: 16M num_reg: 7 lose cover RAM: -128K
*BAD*gran_size: 256K chunk_size: 32M num_reg: 8 lose cover RAM: -128K
*BAD*gran_size: 256K chunk_size: 64M num_reg: 7 lose cover RAM: -128K
*BAD*gran_size: 256K chunk_size: 128M num_reg: 6 lose cover RAM: -128K
*BAD*gran_size: 256K chunk_size: 256M num_reg: 5 lose cover RAM: -128K
*BAD*gran_size: 256K chunk_size: 512M num_reg: 4 lose cover RAM: -128K
*BAD*gran_size: 256K chunk_size: 1G num_reg: 7 lose cover RAM: -128K
*BAD*gran_size: 256K chunk_size: 2G num_reg: 7 lose cover RAM: -128K
*BAD*gran_size: 256K chunk_size: 4G num_reg: 7 lose cover RAM: -128K
*BAD*gran_size: 512K chunk_size: 512K num_reg: 7 lose cover RAM: -128K
*BAD*gran_size: 512K chunk_size: 1M num_reg: 7 lose cover RAM: -128K
*BAD*gran_size: 512K chunk_size: 2M num_reg: 7 lose cover RAM: -128K
*BAD*gran_size: 512K chunk_size: 4M num_reg: 7 lose cover RAM: -128K
*BAD*gran_size: 512K chunk_size: 8M num_reg: 8 lose cover RAM: -128K
*BAD*gran_size: 512K chunk_size: 16M num_reg: 7 lose cover RAM: -128K
*BAD*gran_size: 512K chunk_size: 32M num_reg: 8 lose cover RAM: -128K
*BAD*gran_size: 512K chunk_size: 64M num_reg: 7 lose cover RAM: -128K
*BAD*gran_size: 512K chunk_size: 128M num_reg: 6 lose cover RAM: -128K
*BAD*gran_size: 512K chunk_size: 256M num_reg: 5 lose cover RAM: -128K
*BAD*gran_size: 512K chunk_size: 512M num_reg: 4 lose cover RAM: -128K
*BAD*gran_size: 512K chunk_size: 1G num_reg: 7 lose cover RAM: -128K
*BAD*gran_size: 512K chunk_size: 2G num_reg: 7 lose cover RAM: -128K
*BAD*gran_size: 512K chunk_size: 4G num_reg: 7 lose cover RAM: -128K
*BAD*gran_size: 1M chunk_size: 1M num_reg: 7 lose cover RAM: -128K
*BAD*gran_size: 1M chunk_size: 2M num_reg: 7 lose cover RAM: -128K
*BAD*gran_size: 1M chunk_size: 4M num_reg: 7 lose cover RAM: -128K
*BAD*gran_size: 1M chunk_size: 8M num_reg: 8 lose cover RAM: -128K
*BAD*gran_size: 1M chunk_size: 16M num_reg: 7 lose cover RAM: -128K
*BAD*gran_size: 1M chunk_size: 32M num_reg: 8 lose cover RAM: -128K
*BAD*gran_size: 1M chunk_size: 64M num_reg: 7 lose cover RAM: -128K
*BAD*gran_size: 1M chunk_size: 128M num_reg: 6 lose cover RAM: -128K
*BAD*gran_size: 1M chunk_size: 256M num_reg: 5 lose cover RAM: -128K
*BAD*gran_size: 1M chunk_size: 512M num_reg: 4 lose cover RAM: -128K
*BAD*gran_size: 1M chunk_size: 1G num_reg: 7 lose cover RAM: -128K
*BAD*gran_size: 1M chunk_size: 2G num_reg: 7 lose cover RAM: -128K
*BAD*gran_size: 1M chunk_size: 4G num_reg: 7 lose cover RAM: -128K
gran_size: 2M chunk_size: 2M num_reg: 6 lose cover RAM: 896K
gran_size: 2M chunk_size: 4M num_reg: 6 lose cover RAM: 896K
gran_size: 2M chunk_size: 8M num_reg: 6 lose cover RAM: 896K
gran_size: 2M chunk_size: 16M num_reg: 6 lose cover RAM: 896K
gran_size: 2M chunk_size: 32M num_reg: 7 lose cover RAM: 896K
gran_size: 2M chunk_size: 64M num_reg: 6 lose cover RAM: 896K
gran_size: 2M chunk_size: 128M num_reg: 5 lose cover RAM: 896K
gran_size: 2M chunk_size: 256M num_reg: 4 lose cover RAM: 896K
gran_size: 2M chunk_size: 512M num_reg: 3 lose cover RAM: 896K
gran_size: 2M chunk_size: 1G num_reg: 6 lose cover RAM: 896K
gran_size: 2M chunk_size: 2G num_reg: 6 lose cover RAM: 896K
gran_size: 2M chunk_size: 4G num_reg: 6 lose cover RAM: 896K
gran_size: 4M chunk_size: 4M num_reg: 6 lose cover RAM: 896K
gran_size: 4M chunk_size: 8M num_reg: 6 lose cover RAM: 896K
gran_size: 4M chunk_size: 16M num_reg: 6 lose cover RAM: 896K
gran_size: 4M chunk_size: 32M num_reg: 7 lose cover RAM: 896K
gran_size: 4M chunk_size: 64M num_reg: 6 lose cover RAM: 896K
gran_size: 4M chunk_size: 128M num_reg: 5 lose cover RAM: 896K
gran_size: 4M chunk_size: 256M num_reg: 4 lose cover RAM: 896K
gran_size: 4M chunk_size: 512M num_reg: 3 lose cover RAM: 896K
gran_size: 4M chunk_size: 1G num_reg: 6 lose cover RAM: 896K
gran_size: 4M chunk_size: 2G num_reg: 6 lose cover RAM: 896K
gran_size: 4M chunk_size: 4G num_reg: 6 lose cover RAM: 896K
gran_size: 8M chunk_size: 8M num_reg: 5 lose cover RAM: 4992K
gran_size: 8M chunk_size: 16M num_reg: 5 lose cover RAM: 4992K
gran_size: 8M chunk_size: 32M num_reg: 5 lose cover RAM: 4992K
gran_size: 8M chunk_size: 64M num_reg: 5 lose cover RAM: 4992K
gran_size: 8M chunk_size: 128M num_reg: 4 lose cover RAM: 4992K
gran_size: 8M chunk_size: 256M num_reg: 3 lose cover RAM: 4992K
gran_size: 8M chunk_size: 512M num_reg: 2 lose cover RAM: 4992K
gran_size: 8M chunk_size: 1G num_reg: 5 lose cover RAM: 4992K
gran_size: 8M chunk_size: 2G num_reg: 5 lose cover RAM: 4992K
gran_size: 8M chunk_size: 4G num_reg: 5 lose cover RAM: 4992K
gran_size: 16M chunk_size: 16M num_reg: 5 lose cover RAM: 4992K
gran_size: 16M chunk_size: 32M num_reg: 5 lose cover RAM: 4992K
gran_size: 16M chunk_size: 64M num_reg: 5 lose cover RAM: 4992K
gran_size: 16M chunk_size: 128M num_reg: 4 lose cover RAM: 4992K
gran_size: 16M chunk_size: 256M num_reg: 3 lose cover RAM: 4992K
gran_size: 16M chunk_size: 512M num_reg: 2 lose cover RAM: 4992K
gran_size: 16M chunk_size: 1G num_reg: 5 lose cover RAM: 4992K
gran_size: 16M chunk_size: 2G num_reg: 5 lose cover RAM: 4992K
gran_size: 16M chunk_size: 4G num_reg: 5 lose cover RAM: 4992K
gran_size: 32M chunk_size: 32M num_reg: 4 lose cover RAM: 21376K
gran_size: 32M chunk_size: 64M num_reg: 4 lose cover RAM: 21376K
gran_size: 32M chunk_size: 128M num_reg: 4 lose cover RAM: 21376K
gran_size: 32M chunk_size: 256M num_reg: 3 lose cover RAM: 21376K
gran_size: 32M chunk_size: 512M num_reg: 2 lose cover RAM: 21376K
gran_size: 32M chunk_size: 1G num_reg: 4 lose cover RAM: 21376K
gran_size: 32M chunk_size: 2G num_reg: 4 lose cover RAM: 21376K
gran_size: 32M chunk_size: 4G num_reg: 4 lose cover RAM: 21376K
gran_size: 64M chunk_size: 64M num_reg: 3 lose cover RAM: 54144K
gran_size: 64M chunk_size: 128M num_reg: 3 lose cover RAM: 54144K
gran_size: 64M chunk_size: 256M num_reg: 3 lose cover RAM: 54144K
gran_size: 64M chunk_size: 512M num_reg: 2 lose cover RAM: 54144K
gran_size: 64M chunk_size: 1G num_reg: 3 lose cover RAM: 54144K
gran_size: 64M chunk_size: 2G num_reg: 3 lose cover RAM: 54144K
gran_size: 64M chunk_size: 4G num_reg: 3 lose cover RAM: 54144K
gran_size: 128M chunk_size: 128M num_reg: 2 lose cover RAM: 119680K
gran_size: 128M chunk_size: 256M num_reg: 2 lose cover RAM: 119680K
gran_size: 128M chunk_size: 512M num_reg: 2 lose cover RAM: 119680K
gran_size: 128M chunk_size: 1G num_reg: 2 lose cover RAM: 119680K
mtrr_cleanup: can not find optimal value
please specify mtrr_gran_size/mtrr_chunk_size
kernel direct mapping tables up to 1f500000 @ 7000-d000
DMI 2.4 present.
ACPI: RSDP 000FE020, 0024 (r2 INTEL )
ACPI: XSDT 1F4FE120, 0064 (r1 INTEL Napa 1 1000013)
ACPI: FACP 1F4FC000, 00F4 (r4 INTEL Napa 1 MSFT 1000013)
ACPI: DSDT 1F4F2000, 5DAE (r1 INTEL Napa 1 MSFT 1000013)
ACPI: FACS 1F488000, 0040
ACPI: SSDT 1F4FD000, 04C4 (r2 PmRef CpuPm 3000 INTL 20051117)
ACPI: HPET 1F4FB000, 0038 (r1 INTEL Napa 1 MSFT 1000013)
ACPI: APIC 1F4FA000, 0068 (r2 INTEL Napa 1 MSFT 1000013)
ACPI: MCFG 1F4F9000, 003C (r1 INTEL Napa 1 MSFT 1000013)
ACPI: ASF! 1F4F8000, 00A5 (r32 INTEL Napa 1 MSFT 1000013)
ACPI: SLIC 1F4F1000, 0180 (r1 INTEL Napa 1 MSFT 1000013)
ACPI: BOOT 1F4F0000, 0028 (r1 INTEL Napa 1 MSFT 1000013)
ACPI: DMI detected: Acer
501MB LOWMEM available.
mapped low ram: 0 - 1f500000
low ram: 00000000 - 1f500000
bootmap 00002000 - 00005ea0
(8 early reservations) ==> bootmem [0000000000 - 001f500000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000100000 - 00005766d0] TEXT DATA BSS ==> [0000100000 - 00005766d0]
#4 [0000577000 - 000057a000] INIT_PG_TABLE ==> [0000577000 - 000057a000]
#5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
#6 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000]
#7 [0000002000 - 0000006000] BOOTMAP ==> [0000002000 - 0000006000]
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
Normal 0x00001000 -> 0x0001f500
Movable zone start PFN for each node
early_node_map[5] active PFN ranges
0: 0x00000000 -> 0x0000009f
0: 0x00000100 -> 0x0001f376
0: 0x0001f3bf -> 0x0001f46d
0: 0x0001f4bf -> 0x0001f4f0
0: 0x0001f4ff -> 0x0001f500
On node 0 totalpages: 127989
free_area_init_node: node 0, pgdat c04b5600, node_mem_map c1000000
DMA zone: 3967 pages, LIFO batch:0
Normal zone: 123020 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 000000001f376000 - 000000001f3bf000
PM: Registered nosave memory: 000000001f46d000 - 000000001f4bf000
PM: Registered nosave memory: 000000001f4f0000 - 000000001f4ff000
Allocating PCI resources starting at 30000000 (gap: 20000000:c0000000)
PERCPU: Allocating 39836 bytes of per cpu data
NR_CPUS: 2, nr_cpu_ids: 2, nr_node_ids 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 126987
Kernel command line: video=vesafb:mtrr,ywrap vga=788 ro root=/dev/sda1 resume=/dev/sda2 elevator=noop enable_mtrr_cleanup mtrr-cleanup
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 8192 bytes)
TSC: PIT calibration confirmed by PMTIMER.
TSC: using PIT calibration value
Detected 1595.987 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 502512k/513024k available (2788k kernel code, 9136k reserved, 1070k data, 268k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfffb9000 - 0xfffff000 ( 280 kB)
vmalloc : 0xe0000000 - 0xfffb7000 ( 511 MB)
lowmem : 0xc0000000 - 0xdf500000 ( 501 MB)
.init : 0xc04cc000 - 0xc050f000 ( 268 kB)
.data : 0xc03b90fc - 0xc04c4c10 (1070 kB)
.text : 0xc0100000 - 0xc03b90fc (2788 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
CPA: page pool initialized 1 of 1 pages preallocated
SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
hpet clockevent registered
Calibrating delay loop (skipped), value calculated using timer frequency.. 3191.97 BogoMIPS (lpj=1595987)
Mount-cache hash table entries: 512
CPU: L1 I cache: 32K, L1 D cache: 24K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
using mwait in idle threads.
Checking 'hlt' instruction... OK.
ACPI: Core revision 20080609
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02
Booting processor 1/1 ip 6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3191.84 BogoMIPS (lpj=1595922)
CPU: L1 I cache: 32K, L1 D cache: 24K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (6383.81 BogoMIPS).
CPU0 attaching sched-domain:
domain 0: span 0-1 level SIBLING
groups: 0 1
CPU1 attaching sched-domain:
domain 0: span 0-1 level SIBLING
groups: 1 0
net_namespace: 296 bytes
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored via DMI
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: EC: missing confirmations, switch off interrupt mode.
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in poll mode
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: 0000:00:02.0 reg 10 32bit mmio: [38480000, 384fffff]
PCI: 0000:00:02.0 reg 14 io port: [60c0, 60c7]
PCI: 0000:00:02.0 reg 18 32bit mmio: [20000000, 2fffffff]
PCI: 0000:00:02.0 reg 1c 32bit mmio: [38500000, 3853ffff]
PCI: 0000:00:02.1 reg 10 32bit mmio: [38400000, 3847ffff]
PCI: 0000:00:1b.0 reg 10 64bit mmio: [38540000, 38543fff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
PCI: 0000:00:1d.0 reg 20 io port: [6080, 609f]
PCI: 0000:00:1d.1 reg 20 io port: [6060, 607f]
PCI: 0000:00:1d.2 reg 20 io port: [6040, 605f]
PCI: 0000:00:1d.3 reg 20 io port: [6020, 603f]
PCI: 0000:00:1d.7 reg 10 32bit mmio: [38544400, 385447ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
PCI: 0000:00:1f.2 reg 10 io port: [0, 7]
PCI: 0000:00:1f.2 reg 14 io port: [0, 3]
PCI: 0000:00:1f.2 reg 18 io port: [0, 7]
PCI: 0000:00:1f.2 reg 1c io port: [0, 3]
PCI: 0000:00:1f.2 reg 20 io port: [60a0, 60af]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
PCI: 0000:00:1f.3 reg 20 io port: [6000, 601f]
PCI: bridge 0000:00:1c.0 io port: [5000, 5fff]
PCI: bridge 0000:00:1c.0 32bit mmio: [37300000, 383fffff]
PCI: bridge 0000:00:1c.0 64bit mmio pref: [30000000, 30ffffff]
PCI: 0000:02:00.0 reg 10 io port: [3000, 30ff]
PCI: 0000:02:00.0 reg 18 32bit mmio: [31010000, 31010fff]
PCI: 0000:02:00.0 reg 20 32bit mmio: [31000000, 3100ffff]
PCI: 0000:02:00.0 reg 30 32bit mmio: [fffe0000, ffffffff]
pci 0000:02:00.0: supports D1
pci 0000:02:00.0: supports D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: PME# disabled
PCI: bridge 0000:00:1c.1 io port: [3000, 4fff]
PCI: bridge 0000:00:1c.1 32bit mmio: [36300000, 372fffff]
PCI: bridge 0000:00:1c.1 64bit mmio pref: [31000000, 320fffff]
PCI: 0000:03:00.0 reg 10 64bit mmio: [35200000, 3520ffff]
Pre-1.1 PCIe device detected, disable ASPM for 0000:00:1c.2. It can be enabled forcedly with 'pcie_aspm=force'
PCI: bridge 0000:00:1c.2 io port: [2000, 2fff]
PCI: bridge 0000:00:1c.2 32bit mmio: [35200000, 362fffff]
PCI: bridge 0000:00:1c.2 64bit mmio pref: [32100000, 330fffff]
PCI: 0000:04:00.0 reg 10 32bit mmio: [34100300, 341003ff]
PCI: 0000:04:00.0 reg 30 32bit mmio: [ffff8000, ffffffff]
PCI: 0000:04:00.2 reg 10 32bit mmio: [34100200, 341002ff]
PCI: 0000:04:00.3 reg 10 32bit mmio: [34100100, 341001ff]
PCI: 0000:04:00.4 reg 10 32bit mmio: [34100000, 341000ff]
PCI: bridge 0000:00:1c.3 io port: [1000, 1fff]
PCI: bridge 0000:00:1c.3 32bit mmio: [34100000, 351fffff]
PCI: bridge 0000:00:1c.3 64bit mmio pref: [33100000, 340fffff]
pci 0000:00:1e.0: transparent bridge
bus 00 -> node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:01: io resource (0x164e-0x164f) overlaps 0000:00:1c.3 BAR 7 (0x1000-0x1fff), disabling
pnp: PnP ACPI: found 9 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
libata version 3.00 loaded.
PCI: Using ACPI for IRQ routing
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
Switched to high resolution mode on CPU 0
tracer: 772 pages allocated for 65536 entries of 48 bytes
actual entries 65620
ACPI Error (dsfield-0139): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0._OSC] (Node dec13cc0), AE_ALREADY_EXISTS
ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error
Switched to high resolution mode on CPU 1
system 00:01: ioport range 0x200-0x20f has been reserved
system 00:01: ioport range 0x600-0x60f has been reserved
system 00:01: ioport range 0x610-0x610 has been reserved
system 00:01: ioport range 0x800-0x80f has been reserved
system 00:01: ioport range 0x400-0x47f has been reserved
system 00:01: ioport range 0x500-0x53f has been reserved
system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
system 00:01: iomem range 0xfee00000-0xfee00fff could not be reserved
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
pci 0000:00:1c.0: IO window: 0x5000-0x5fff
pci 0000:00:1c.0: MEM window: 0x37300000-0x383fffff
pci 0000:00:1c.0: PREFETCH window: 0x00000030000000-0x00000030ffffff
pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.1: IO window: 0x3000-0x4fff
pci 0000:00:1c.1: MEM window: 0x36300000-0x372fffff
pci 0000:00:1c.1: PREFETCH window: 0x00000031000000-0x000000320fffff
pci 0000:00:1c.2: PCI bridge, secondary bus 0000:03
pci 0000:00:1c.2: IO window: 0x2000-0x2fff
pci 0000:00:1c.2: MEM window: 0x35200000-0x362fffff
pci 0000:00:1c.2: PREFETCH window: 0x00000032100000-0x000000330fffff
pci 0000:00:1c.3: PCI bridge, secondary bus 0000:04
pci 0000:00:1c.3: IO window: 0x1000-0x1fff
pci 0000:00:1c.3: MEM window: 0x34100000-0x351fffff
pci 0000:00:1c.3: PREFETCH window: 0x00000033100000-0x000000340fffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
pci 0000:00:1e.0: IO window: disabled
pci 0000:00:1e.0: MEM window: disabled
pci 0000:00:1e.0: PREFETCH window: disabled
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [0, ffffffff]
bus: 01 index 0 io port: [5000, 5fff]
bus: 01 index 1 mmio: [37300000, 383fffff]
bus: 01 index 2 mmio: [30000000, 30ffffff]
bus: 01 index 3 mmio: [0, 0]
bus: 02 index 0 io port: [3000, 4fff]
bus: 02 index 1 mmio: [36300000, 372fffff]
bus: 02 index 2 mmio: [31000000, 320fffff]
bus: 02 index 3 mmio: [0, 0]
bus: 03 index 0 io port: [2000, 2fff]
bus: 03 index 1 mmio: [35200000, 362fffff]
bus: 03 index 2 mmio: [32100000, 330fffff]
bus: 03 index 3 mmio: [0, 0]
bus: 04 index 0 io port: [1000, 1fff]
bus: 04 index 1 mmio: [34100000, 351fffff]
bus: 04 index 2 mmio: [33100000, 340fffff]
bus: 04 index 3 mmio: [0, 0]
bus: 05 index 0 mmio: [0, 0]
bus: 05 index 1 mmio: [0, 0]
bus: 05 index 2 mmio: [0, 0]
bus: 05 index 3 io port: [0, ffff]
bus: 05 index 4 mmio: [0, ffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
NET: Registered protocol family 1
Simple Boot Flag value 0x5 read from CMOS RAM was invalid
Simple Boot Flag at 0x44 set to 0x1
IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 982
io scheduler noop registered (default)
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
pci 0000:00:02.0: Boot video device
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.0: found MSI capability
pci_express 0000:00:1c.0:pcie00: allocate port service
pci_express 0000:00:1c.0:pcie02: allocate port service
pci_express 0000:00:1c.0:pcie03: allocate port service
pcieport-driver 0000:00:1c.1: setting latency timer to 64
pcieport-driver 0000:00:1c.1: found MSI capability
pci_express 0000:00:1c.1:pcie00: allocate port service
pci_express 0000:00:1c.1:pcie02: allocate port service
pci_express 0000:00:1c.1:pcie03: allocate port service
pcieport-driver 0000:00:1c.2: setting latency timer to 64
pcieport-driver 0000:00:1c.2: found MSI capability
pci_express 0000:00:1c.2:pcie00: allocate port service
pci_express 0000:00:1c.2:pcie02: allocate port service
pci_express 0000:00:1c.2:pcie03: allocate port service
pcieport-driver 0000:00:1c.3: setting latency timer to 64
pcieport-driver 0000:00:1c.3: found MSI capability
pci_express 0000:00:1c.3:pcie00: allocate port service
pci_express 0000:00:1c.3:pcie02: allocate port service
pci_express 0000:00:1c.3:pcie03: allocate port service
vesafb: framebuffer at 0x20000000, mapped to 0xe0080000, using 1875k, total 7872k
vesafb: mode is 800x600x16, linelength=1600, pages=7
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 100x37
fb0: VESA VGA frame buffer device
vga16fb: initializing
vga16fb: mapped to 0xc00a0000
fb1: VGA16 VGA frame buffer device
hpet_resources: 0xfed00000 is busy
Driver 'sd' needs updating - please use bus_type methods
ata_piix 0000:00:1f.2: version 2.12
ata_piix 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x60a0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x60a8 irq 15
ata2.00: ATA-5: SSDPAMM0008G1EA, Ver2.I0H, max UDMA/66
ata2.00: 15761088 sectors, multi 0: LBA
ata2.00: configured for UDMA/66
scsi 1:0:0:0: Direct-Access ATA SSDPAMM0008G1EA Ver2 PQ: 0 ANSI: 5
sd 1:0:0:0: [sda] 15761088 512-byte hardware sectors (8070 MB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sda] 15761088 512-byte hardware sectors (8070 MB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 1:0:0:0: [sda] Attached SCSI disk
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
i8042.c: Warning: Keylock active.
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
NET: Registered protocol family 15
Using IPI No-Shortcut mode
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04771/0xa40000
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input1
EXT4-fs warning (device sda1): ext4_fill_super: extents feature not enabled on this filesystem, use tune2fs.
EXT4-fs: sda1: not marked OK to use with test code.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 268k freed
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
sd 1:0:0:0: Attached scsi generic sg0 type 0
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
r8169 0000:02:00.0: setting latency timer to 64
r8169 0000:02:00.0: unknown MAC (27a00000)
eth0: RTL8169 at 0xe0026000, 00:1e:68:8c:23:ad, XID 24a00000 IRQ 219
ACPI: WMI: Mapper loaded
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 16, io mem 0x38544400
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
USB Universal Host Controller Interface driver v3.0
input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
ACPI: Power Button (CM) [PWRB]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
Linux agpgart interface v0.103
ACPI: Lid Switch [LID0]
input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5
ACPI: Sleep Button (CM) [SLPB]
ACPI: SSDT 1F380C90, 0239 (r2 PmRef Cpu0Ist 3000 INTL 20051117)
ACPI: SSDT 1F37FE10, 01C7 (r2 PmRef Cpu0Cst 3001 INTL 20051117)
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI0007:00: registered as cooling_device0
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT 1F380F10, 00D0 (r2 PmRef Cpu1Ist 3000 INTL 20051117)
ACPI: SSDT 1F37EF10, 0083 (r2 PmRef Cpu1Cst 3000 INTL 20051117)
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI0007:01: registered as cooling_device1
ACPI: Processor [CPU1] (supports 8 throttling states)
Marking TSC unstable due to TSC halts in idle
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.26-jam15 ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 16, io base 0x00006080
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: Battery Slot [BAT1] (battery present)
ACPI: AC Adapter [ACAD] (on-line)
usb 1-5: new high speed USB device using ehci_hcd and address 3
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:19/input/input6
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.26-jam15 uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
agpgart-intel 0000:00:00.0: Intel 945GME Chipset
agpgart-intel 0000:00:00.0: detected 7932K stolen memory
ACPI: Video Device [OVGA] (multi-head: yes rom: yes post: no)
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x20000000
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 17, io base 0x00006060
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
acer-wmi: Acer Laptop ACPI-WMI Extras
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.26-jam15 uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
ath5k_pci 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ath5k_pci 0000:03:00.0: setting latency timer to 64
ath5k_pci 0000:03:00.0: registered as 'phy0'
ath5k phy0: Support for RF2425 is under development.
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00006040
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 1-5: configuration #1 chosen from 1 choice
usb 1-5: New USB device found, idVendor=0c45, idProduct=62c0
usb 1-5: New USB device strings: Mfr=2, Product=1, SerialNumber=0
usb 1-5: Product: USB 2.0 Camera
usb 1-5: Manufacturer: Sonix Technology Co., Ltd.
phy0: Selected rate control algorithm 'pid'
ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
sdhci-pci 0000:04:00.0: SDHCI controller found [197b:2382] (rev 0)
sdhci-pci 0000:04:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
sdhci-pci 0000:04:00.0: setting latency timer to 64
mmc0: SDHCI controller on PCI [0000:04:00.0] using ADMA
sdhci-pci 0000:04:00.2: SDHCI controller found [197b:2381] (rev 0)
sdhci-pci 0000:04:00.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
sdhci-pci 0000:04:00.2: Refusing to bind to secondary interface.
sdhci-pci 0000:04:00.2: PCI INT A disabled
usb 2-1: new low speed USB device using uhci_hcd and address 2
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.26-jam15 uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 19, io base 0x00006020
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb 2-1: configuration #1 chosen from 1 choice
usb 2-1: New USB device found, idVendor=046d, idProduct=c00f
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1: Product: USB-PS/2 Optical Mouse
usb 2-1: Manufacturer: Logitech
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.26-jam15 uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
HDA Intel 0000:00:1b.0: setting latency timer to 64
hda_codec: Unknown model for ALC268, trying auto-probe from BIOS...
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device USB 2.0 Camera (0c45:62c0)
input: USB 2.0 Camera as /devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5:1.0/input/input7
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
mmc0: new SDHC card at address 0002
mmcblk0: mmc0:0002 7917568KiB
mmcblk0: p1
usbcore: registered new interface driver hiddev
input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input8
input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
kjournald starting. Commit interval 30 seconds
EXT3 FS on mmcblk0p1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
loop: module loaded
Adding 530136k swap on /dev/sda2. Priority:-1 extents:1 across:530136k
coretemp coretemp.0: Unable to read IA32_TEMPERATURE_TARGET MSR
coretemp coretemp.1: Unable to read IA32_TEMPERATURE_TARGET MSR
r8169: eth0: link up
r8169: eth0: link up
wlan0: authenticate with AP 00:18:39:86:f1:9a
wlan0: authenticated
wlan0: associate with AP 00:18:39:86:f1:9a
wlan0: RX AssocResp from 00:18:39:86:f1:9a (capab=0x411 status=0 aid=2)
wlan0: associated
[drm] Initialized drm 1.1.0 20060810
pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:02.0: setting latency timer to 64
[drm] Initialized i915 1.6.0 20060119 on minor 0
mtrr: no more MTRRs available
--
J.A. Magallon <jamagallon()ono!com> \ Software is like sex:
\ It's better when it's free
Mandriva Linux release 2009.0 (Cooker) for i586
Linux 2.6.25-jam18 (gcc 4.3.1 20080626 (GCC) #1 SMP
next prev parent reply other threads:[~2008-10-04 13:22 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-09-29 23:57 Strange mtrrs in Aspire One J.A. Magallón
2008-09-30 1:05 ` Yinghai Lu
2008-10-04 13:22 ` J.A. Magallón [this message]
2008-10-04 17:55 ` Yinghai Lu
2008-10-04 21:54 ` Yinghai Lu
2008-10-04 23:02 ` J.A. Magallón
2008-10-04 23:10 ` Yinghai Lu
2008-10-06 0:39 ` J.A. Magallón
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20081004152235.387a6f61@werewolf.home \
--to=jamagallon@ono.com \
--cc=linux-kernel@vger.kernel.org \
--cc=yinghai@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.