From: Christian Lamparter <chunkeey@web.de>
To: linux-wireless@vger.kernel.org
Cc: Larry Finger <Larry.Finger@lwfinger.net>,
John W Linville <linville@tuxdriver.com>,
Kalle Valo <kalle.valo@nokia.com>,
Johannes Berg <johannes@sipsolutions.net>
Subject: [RFC][PATCH 3/5] p54: refactor p54_rx_frame_sent
Date: Sun, 5 Oct 2008 02:39:10 +0200 [thread overview]
Message-ID: <200810050239.10220.chunkeey@web.de> (raw)
the long names and the nesting in p54_rx_frame_sent really became a "line longer than 80 characters" problem.
---
diff -Nurp a/drivers/net/wireless/p54/p54common.c b/drivers/net/wireless/p54/p54common.c
--- a/drivers/net/wireless/p54/p54common.c 2008-10-05 01:46:18.000000000 +0200
+++ b/drivers/net/wireless/p54/p54common.c 2008-10-05 01:46:31.000000000 +0200
@@ -557,54 +557,56 @@ static void p54_rx_frame_sent(struct iee
spin_lock_irqsave(&priv->tx_queue.lock, flags);
while (entry != (struct sk_buff *)&priv->tx_queue) {
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(entry);
- range = (void *)info->driver_data;
- if (range->start_addr == addr) {
- struct p54_control_hdr *entry_hdr;
- struct p54_tx_control_allocdata *entry_data;
- int pad = 0;
-
- if (entry->next != (struct sk_buff *)&priv->tx_queue) {
- struct ieee80211_tx_info *ni;
- struct memrecord *mr;
-
- ni = IEEE80211_SKB_CB(entry->next);
- mr = (struct memrecord *)ni->driver_data;
- freed = mr->start_addr - last_addr;
- } else
- freed = priv->rx_end - last_addr;
+ struct p54_control_hdr *entry_hdr;
+ struct p54_tx_control_allocdata *entry_data;
+ int pad = 0;
+ range = (void *)info->driver_data;
+ if (range->start_addr != addr) {
last_addr = range->end_addr;
- __skb_unlink(entry, &priv->tx_queue);
- spin_unlock_irqrestore(&priv->tx_queue.lock, flags);
+ entry = entry->next;
+ continue;
+ }
- memset(&info->status, 0, sizeof(info->status));
- entry_hdr = (struct p54_control_hdr *) entry->data;
- entry_data = (struct p54_tx_control_allocdata *) entry_hdr->data;
- if ((entry_hdr->magic1 & cpu_to_le16(0x4000)) != 0)
- pad = entry_data->align[0];
-
- priv->tx_stats[entry_data->hw_queue].len--;
- if (!(info->flags & IEEE80211_TX_CTL_NO_ACK)) {
- if (!(payload->status & 0x01))
- info->flags |= IEEE80211_TX_STAT_ACK;
- else
- info->status.excessive_retries = 1;
- }
- info->status.retry_count = payload->retries - 1;
- info->status.ack_signal = p54_rssi_to_dbm(dev,
- le16_to_cpu(payload->ack_rssi));
- skb_pull(entry, sizeof(*hdr) + pad + sizeof(*entry_data));
- ieee80211_tx_status_irqsafe(dev, entry);
- goto out;
+ if (entry->next != (struct sk_buff *)&priv->tx_queue) {
+ struct ieee80211_tx_info *ni;
+ struct memrecord *mr;
+
+ ni = IEEE80211_SKB_CB(entry->next);
+ mr = (struct memrecord *)ni->driver_data;
+ freed = mr->start_addr - last_addr;
} else
- last_addr = range->end_addr;
- entry = entry->next;
+ freed = priv->rx_end - last_addr;
+
+ last_addr = range->end_addr;
+ __skb_unlink(entry, &priv->tx_queue);
+ spin_unlock_irqrestore(&priv->tx_queue.lock, flags);
+
+ memset(&info->status, 0, sizeof(info->status));
+ entry_hdr = (struct p54_control_hdr *) entry->data;
+ entry_data = (struct p54_tx_control_allocdata *)entry_hdr->data;
+ if (entry_hdr->magic1 & cpu_to_le16(0x4000))
+ pad = entry_data->align[0];
+
+ priv->tx_stats[entry_data->hw_queue].len--;
+ if (!(info->flags & IEEE80211_TX_CTL_NO_ACK)) {
+ if (!(payload->status & 0x01))
+ info->flags |= IEEE80211_TX_STAT_ACK;
+ else
+ info->status.excessive_retries = 1;
+ }
+ info->status.retry_count = payload->retries - 1;
+ info->status.ack_signal = p54_rssi_to_dbm(dev,
+ le16_to_cpu(payload->ack_rssi));
+ skb_pull(entry, sizeof(*hdr) + pad + sizeof(*entry_data));
+ ieee80211_tx_status_irqsafe(dev, entry);
+ goto out;
}
spin_unlock_irqrestore(&priv->tx_queue.lock, flags);
out:
- if (freed >= IEEE80211_MAX_RTS_THRESHOLD + 0x170 +
- sizeof(struct p54_control_hdr))
+ if (freed >= IEEE80211_MAX_RTS_THRESHOLD + priv->headroom +
+ priv->tailroom + sizeof(struct p54_control_hdr))
p54_wake_free_queues(dev);
}
reply other threads:[~2008-10-05 0:35 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200810050239.10220.chunkeey@web.de \
--to=chunkeey@web.de \
--cc=Larry.Finger@lwfinger.net \
--cc=johannes@sipsolutions.net \
--cc=kalle.valo@nokia.com \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.