From: Ben Dooks <ben-linux-elnMNo+KYs3YtjvyW6yDsg@public.gmane.org>
To: spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
Cc: david-b-yBeKhBN/0LDR7s880joybQ@public.gmane.org,
Ben Dooks <ben-linux-elnMNo+KYs3YtjvyW6yDsg@public.gmane.org>
Subject: [patch 1/9] S3C24XX: Default SPI pin configuration for SPI
Date: Fri, 10 Oct 2008 11:03:45 +0100 [thread overview]
Message-ID: <20081010100404.402586503@fluff.org.uk> (raw)
In-Reply-To: 20081010100344.572052114@fluff.org.uk
[-- Attachment #1: simtec/simtec-s3c24xx-spi-default-gpios.patch --]
[-- Type: text/plain, Size: 6192 bytes --]
Add a set of default pin configuration routines for
setting up the SPI gpio configuration when using the
hardware SPI driver.
Signed-off-by: Ben Dooks <ben-linux-elnMNo+KYs3YtjvyW6yDsg@public.gmane.org>
Index: linux-2.6.27-rc6-quilt4/arch/arm/plat-s3c24xx/Kconfig
===================================================================
--- linux-2.6.27-rc6-quilt4.orig/arch/arm/plat-s3c24xx/Kconfig 2008-09-16 11:57:16.000000000 +0100
+++ linux-2.6.27-rc6-quilt4/arch/arm/plat-s3c24xx/Kconfig 2008-09-16 12:28:19.000000000 +0100
@@ -49,6 +49,22 @@ config S3C2410_DMA_DEBUG
Enable debugging output for the DMA code. This option sends info
to the kernel log, at priority KERN_DEBUG.
+# SPI default pin configuration code
+
+config S3C24XX_SPI_BUS0_GPE11_GPE12_GPE13
+ bool
+ help
+ SPI GPIO configuration code for BUS0 when connected to
+ GPE11, GPE12 and GPE13.
+
+config S3C24XX_SPI_BUS1_GPG5_GPG6_GPG7
+ bool
+ help
+ SPI GPIO configuration code for BUS 1 when connected to
+ GPG5, GPG6 and GPG7.
+
+# common code for s3c24xx based machines, such as the SMDKs.
+
config MACH_SMDK
bool
help
Index: linux-2.6.27-rc6-quilt4/arch/arm/plat-s3c24xx/Makefile
===================================================================
--- linux-2.6.27-rc6-quilt4.orig/arch/arm/plat-s3c24xx/Makefile 2008-09-16 11:57:16.000000000 +0100
+++ linux-2.6.27-rc6-quilt4/arch/arm/plat-s3c24xx/Makefile 2008-09-16 12:29:00.000000000 +0100
@@ -31,4 +31,12 @@ obj-$(CONFIG_PM) += pm.o
obj-$(CONFIG_PM) += sleep.o
obj-$(CONFIG_HAVE_PWM) += pwm.o
obj-$(CONFIG_S3C2410_DMA) += dma.o
+
+# SPI gpio central GPIO functions
+
+obj-$(CONFIG_S3C24XX_SPI_BUS0_GPE11_GPE12_GPE13) += spi-bus0-gpe11_12_13.o
+obj-$(CONFIG_S3C24XX_SPI_BUS1_GPG5_GPG6_GPG7) += spi-bus1-gpg5_6_7.o
+
+# machine common support
+
obj-$(CONFIG_MACH_SMDK) += common-smdk.o
Index: linux-2.6.27-rc6-quilt4/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.27-rc6-quilt4/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c 2008-09-16 12:27:15.000000000 +0100
@@ -0,0 +1,37 @@
+/* linux/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben-Y5A6D6n0/KfQXOPxS62xeg@public.gmane.org>
+ *
+ * S3C24XX SPI - gpio configuration for bus 0 on gpe11,12,13
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+*/
+
+#include <linux/kernel.h>
+
+#include <mach/hardware.h>
+
+#include <mach/spi.h>
+#include <mach/regs-gpio.h>
+
+void s3c24xx_spi_gpiocfg_bus0_gpe11_12_13(struct s3c2410_spi_info *spi,
+ int enable)
+{
+ if (enable) {
+ s3c2410_gpio_cfgpin(S3C2410_GPE13, S3C2410_GPE13_SPICLK0);
+ s3c2410_gpio_cfgpin(S3C2410_GPE12, S3C2410_GPE12_SPIMOSI0);
+ s3c2410_gpio_cfgpin(S3C2410_GPE11, S3C2410_GPE11_SPIMISO0);
+ s3c2410_gpio_pullup(S3C2410_GPE11, 0);
+ s3c2410_gpio_pullup(S3C2410_GPE13, 0);
+ } else {
+ s3c2410_gpio_cfgpin(S3C2410_GPE13, S3C2410_GPIO_INPUT);
+ s3c2410_gpio_cfgpin(S3C2410_GPE11, S3C2410_GPIO_INPUT);
+ s3c2410_gpio_pullup(S3C2410_GPE11, 1);
+ s3c2410_gpio_pullup(S3C2410_GPE12, 1);
+ s3c2410_gpio_pullup(S3C2410_GPE13, 1);
+ }
+}
Index: linux-2.6.27-rc6-quilt4/arch/arm/mach-s3c2410/include/mach/spi.h
===================================================================
--- linux-2.6.27-rc6-quilt4.orig/arch/arm/mach-s3c2410/include/mach/spi.h 2008-09-16 12:27:07.000000000 +0100
+++ linux-2.6.27-rc6-quilt4/arch/arm/mach-s3c2410/include/mach/spi.h 2008-09-16 12:27:15.000000000 +0100
@@ -22,5 +22,12 @@ struct s3c2410_spi_info {
void (*set_cs)(struct s3c2410_spi_info *spi, int cs, int pol);
};
+/* Standard setup / suspend routines for SPI GPIO pins. */
+
+extern void s3c24xx_spi_gpiocfg_bus0_gpe11_12_13(struct s3c2410_spi_info *spi,
+ int enable);
+
+extern void s3c24xx_spi_gpiocfg_bus1_gpg5_6_7(struct s3c2410_spi_info *spi,
+ int enable);
#endif /* __ASM_ARCH_SPI_H */
Index: linux-2.6.27-rc6-quilt4/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.27-rc6-quilt4/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c 2008-09-16 12:27:15.000000000 +0100
@@ -0,0 +1,37 @@
+/* linux/arch/arm/plat-s3c24xx/spi-bus0-gpg5_6_7.c
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben-Y5A6D6n0/KfQXOPxS62xeg@public.gmane.org>
+ *
+ * S3C24XX SPI - gpio configuration for bus 1 on gpg5,6,7
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+*/
+
+#include <linux/kernel.h>
+
+#include <mach/hardware.h>
+
+#include <mach/spi.h>
+#include <mach/regs-gpio.h>
+
+void s3c24xx_spi_gpiocfg_bus1_gpg5_6_7(struct s3c2410_spi_info *spi,
+ int enable)
+{
+ if (enable) {
+ s3c2410_gpio_cfgpin(S3C2410_GPG7, S3C2410_GPG7_SPICLK1);
+ s3c2410_gpio_cfgpin(S3C2410_GPG6, S3C2410_GPG6_SPIMOSI1);
+ s3c2410_gpio_cfgpin(S3C2410_GPG5, S3C2410_GPG5_SPIMISO1);
+ s3c2410_gpio_pullup(S3C2410_GPG5, 0);
+ s3c2410_gpio_pullup(S3C2410_GPG6, 0);
+ } else {
+ s3c2410_gpio_cfgpin(S3C2410_GPG7, S3C2410_GPIO_INPUT);
+ s3c2410_gpio_cfgpin(S3C2410_GPG5, S3C2410_GPIO_INPUT);
+ s3c2410_gpio_pullup(S3C2410_GPG5, 1);
+ s3c2410_gpio_pullup(S3C2410_GPG6, 1);
+ s3c2410_gpio_pullup(S3C2410_GPG7, 1);
+ }
+}
--
Ben (ben-elnMNo+KYs3YtjvyW6yDsg@public.gmane.org, http://www.fluff.org/)
'a smiley only costs 4 bytes'
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
next prev parent reply other threads:[~2008-10-10 10:03 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-10-10 10:03 [patch 0/9] S3C24XX SPI updates for 2.6.28 Ben Dooks
2008-10-10 10:03 ` Ben Dooks [this message]
2008-10-10 10:03 ` [patch 2/9] S3C24XX: Fix sparse errors in platform uncompress.h Ben Dooks
2008-10-10 10:03 ` [patch 3/9] arch/arm/mach-s3c2410/pm.c: fix sparse warnings Ben Dooks
2008-10-10 10:03 ` [patch 4/9] S3C24XX: AT2440EVB MMC Ben Dooks
2008-10-10 10:03 ` [patch 5/9] AT2440EVB: LCD frame buffer support Ben Dooks
2008-10-10 10:03 ` [patch 6/9] S3C24XX: Common ADC driver for S3C24XX archs Ben Dooks
2008-10-10 10:03 ` [patch 7/9] ANUBIS: Add SM501 GPIO and update I2C setup Ben Dooks
2008-10-10 10:03 ` [patch 8/9] S3C24XX: Add extra GPIOs via Kconfig Ben Dooks
2008-10-10 10:03 ` [patch 9/9] JIVE: fix spi gpio implementation Ben Dooks
[not found] ` <20081010100344.572052114-elnMNo+KYs3pIgCt6eIbzw@public.gmane.org>
2008-10-10 10:21 ` [patch 0/9] S3C24XX SPI updates for 2.6.28 Ben Dooks
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20081010100404.402586503@fluff.org.uk \
--to=ben-linux-elnmno+kys3ytjvyw6ydsg@public.gmane.org \
--cc=david-b-yBeKhBN/0LDR7s880joybQ@public.gmane.org \
--cc=spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.