From: Yu Zhao <yu.zhao@intel.com>
To: "linux-pci@vger.kernel.org" <linux-pci@vger.kernel.org>
Cc: "jbarnes@virtuousgeek.org" <jbarnes@virtuousgeek.org>,
"randy.dunlap@oracle.com" <randy.dunlap@oracle.com>,
"grundler@parisc-linux.org" <grundler@parisc-linux.org>,
"achiang@hp.com" <achiang@hp.com>,
"matthew@wil.cx" <matthew@wil.cx>,
"rdreier@cisco.com" <rdreier@cisco.com>,
"greg@kroah.com" <greg@kroah.com>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"kvm@vger.kernel.org" <kvm@vger.kernel.org>,
"virtualization@lists.linux-foundation.org"
<virtualization@lists.linux-foundation.org>
Subject: [PATCH 1/8 v4] PCI: define PCI resource names in an 'enum'
Date: Tue, 14 Oct 2008 18:46:34 +0800 [thread overview]
Message-ID: <20081014104634.GA1734@yzhao12-linux.sh.intel.com> (raw)
In-Reply-To: <20081014103424.GA1704@yzhao12-linux.sh.intel.com>
This patch moves all definitions of PCI resource names to an 'enum',
and also replaces some hard-coded resource variables with symbol
names. This change eases the introduction of device specific resources.
Signed-off-by: Yu Zhao <yu.zhao@intel.com>
---
drivers/pci/pci-sysfs.c | 4 +++-
drivers/pci/pci.c | 19 ++-----------------
drivers/pci/probe.c | 2 +-
drivers/pci/proc.c | 7 ++++---
include/linux/pci.h | 37 ++++++++++++++++++++++++-------------
5 files changed, 34 insertions(+), 35 deletions(-)
diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
index 2cad6da..c41b783 100644
--- a/drivers/pci/pci-sysfs.c
+++ b/drivers/pci/pci-sysfs.c
@@ -101,11 +101,13 @@ resource_show(struct device * dev, struct device_attribute *attr, char * buf)
struct pci_dev * pci_dev = to_pci_dev(dev);
char * str = buf;
int i;
- int max = 7;
+ int max;
resource_size_t start, end;
if (pci_dev->subordinate)
max = DEVICE_COUNT_RESOURCE;
+ else
+ max = PCI_BRIDGE_RESOURCES;
for (i = 0; i < max; i++) {
struct resource *res = &pci_dev->resource[i];
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 5ecd2d7..a9c64b0 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -359,24 +359,9 @@ pci_find_parent_resource(const struct pci_dev *dev, struct resource *res)
static void
pci_restore_bars(struct pci_dev *dev)
{
- int i, numres;
-
- switch (dev->hdr_type) {
- case PCI_HEADER_TYPE_NORMAL:
- numres = 6;
- break;
- case PCI_HEADER_TYPE_BRIDGE:
- numres = 2;
- break;
- case PCI_HEADER_TYPE_CARDBUS:
- numres = 1;
- break;
- default:
- /* Should never get here, but just in case... */
- return;
- }
+ int i;
- for (i = 0; i < numres; i++)
+ for (i = 0; i < PCI_BRIDGE_RESOURCES; i++)
pci_update_resource(dev, i);
}
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index dcd6bf1..03ddfee 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -492,7 +492,7 @@ static struct pci_bus *pci_alloc_child_bus(struct pci_bus *parent,
child->subordinate = 0xff;
/* Set up default resource pointers and names.. */
- for (i = 0; i < 4; i++) {
+ for (i = 0; i < PCI_BRIDGE_RES_NUM; i++) {
child->resource[i] = &bridge->resource[PCI_BRIDGE_RESOURCES+i];
child->resource[i]->name = child->name;
}
diff --git a/drivers/pci/proc.c b/drivers/pci/proc.c
index e1098c3..f6f2a59 100644
--- a/drivers/pci/proc.c
+++ b/drivers/pci/proc.c
@@ -352,15 +352,16 @@ static int show_device(struct seq_file *m, void *v)
dev->vendor,
dev->device,
dev->irq);
- /* Here should be 7 and not PCI_NUM_RESOURCES as we need to preserve compatibility */
- for (i=0; i<7; i++) {
+
+ /* only print standard and ROM resources to preserve compatibility */
+ for (i = 0; i <= PCI_ROM_RESOURCE; i++) {
resource_size_t start, end;
pci_resource_to_user(dev, i, &dev->resource[i], &start, &end);
seq_printf(m, "\t%16llx",
(unsigned long long)(start |
(dev->resource[i].flags & PCI_REGION_FLAG_MASK)));
}
- for (i=0; i<7; i++) {
+ for (i = 0; i <= PCI_ROM_RESOURCE; i++) {
resource_size_t start, end;
pci_resource_to_user(dev, i, &dev->resource[i], &start, &end);
seq_printf(m, "\t%16llx",
diff --git a/include/linux/pci.h b/include/linux/pci.h
index f280783..497d639 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -76,7 +76,30 @@ enum pci_mmap_state {
#define PCI_DMA_FROMDEVICE 2
#define PCI_DMA_NONE 3
-#define DEVICE_COUNT_RESOURCE 12
+/*
+ * For PCI devices, the region numbers are assigned this way:
+ */
+enum {
+ /* #0-5: standard PCI regions */
+ PCI_STD_RESOURCES,
+ PCI_STD_RESOURCES_END = 5,
+
+ /* #6: expansion ROM */
+ PCI_ROM_RESOURCE,
+
+ /* address space assigned to buses behind the bridge */
+#ifndef PCI_BRIDGE_RES_NUM
+#define PCI_BRIDGE_RES_NUM 4
+#endif
+ PCI_BRIDGE_RESOURCES,
+ PCI_BRIDGE_RES_END = PCI_BRIDGE_RESOURCES + PCI_BRIDGE_RES_NUM - 1,
+
+ /* total resources associated with a PCI device */
+ PCI_NUM_RESOURCES,
+
+ /* preserve this for compatibility */
+ DEVICE_COUNT_RESOURCE
+};
typedef int __bitwise pci_power_t;
@@ -262,18 +285,6 @@ static inline void pci_add_saved_cap(struct pci_dev *pci_dev,
hlist_add_head(&new_cap->next, &pci_dev->saved_cap_space);
}
-/*
- * For PCI devices, the region numbers are assigned this way:
- *
- * 0-5 standard PCI regions
- * 6 expansion ROM
- * 7-10 bridges: address space assigned to buses behind the bridge
- */
-
-#define PCI_ROM_RESOURCE 6
-#define PCI_BRIDGE_RESOURCES 7
-#define PCI_NUM_RESOURCES 11
-
#ifndef PCI_BUS_NUM_RESOURCES
#define PCI_BUS_NUM_RESOURCES 16
#endif
--
1.5.6.4
next prev parent reply other threads:[~2008-10-14 11:42 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-10-14 10:34 [PATCH 0/8 v4] PCI: Linux kernel SR-IOV support Yu Zhao
2008-10-14 10:46 ` Yu Zhao [this message]
2008-10-14 10:46 ` [PATCH 1/8 v4] PCI: define PCI resource names in an 'enum' Yu Zhao
2008-10-14 10:48 ` [PATCH 2/8 v4] PCI: export __pci_read_base Yu Zhao
2008-10-14 10:48 ` Yu Zhao
2008-10-14 10:53 ` [PATCH 3/8 v4] PCI: export pci_alloc_child_bus Yu Zhao
2008-10-14 10:53 ` Yu Zhao
2008-10-14 10:55 ` [PATCH 4/8 v4] PCI: add a wrapper for resource_alignment Yu Zhao
2008-10-14 10:55 ` Yu Zhao
2008-10-14 10:57 ` [PATCH 5/8 v4] PCI: add a new function to map BAR offset Yu Zhao
2008-10-14 10:57 ` Yu Zhao
2008-10-14 10:59 ` [PATCH 6/8 v4] PCI: support the SR-IOV capability Yu Zhao
2008-10-14 10:59 ` Yu Zhao
2008-10-14 12:30 ` Matthew Wilcox
2008-10-15 2:04 ` Zhao, Yu
2008-10-15 2:04 ` Zhao, Yu
2008-10-14 12:30 ` Matthew Wilcox
2008-10-14 14:37 ` Greg KH
2008-10-14 14:37 ` Greg KH
2008-10-14 11:00 ` [PATCH 7/8 v4] PCI: reserve bus range for the SR-IOV device Yu Zhao
2008-10-14 11:00 ` Yu Zhao
2008-10-14 11:01 ` [PATCH 8/8 v4] PCI: document the changes Yu Zhao
2008-10-14 11:01 ` Yu Zhao
2008-10-17 22:54 ` Pavel Machek
2008-10-17 22:54 ` Pavel Machek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20081014104634.GA1734@yzhao12-linux.sh.intel.com \
--to=yu.zhao@intel.com \
--cc=achiang@hp.com \
--cc=greg@kroah.com \
--cc=grundler@parisc-linux.org \
--cc=jbarnes@virtuousgeek.org \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=matthew@wil.cx \
--cc=randy.dunlap@oracle.com \
--cc=rdreier@cisco.com \
--cc=virtualization@lists.linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.