From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jean Delvare Date: Wed, 15 Oct 2008 08:35:16 +0000 Subject: Re: [lm-sensors] [RFC v2] [PATCH] hwmon: Add LTC4245 driver Message-Id: <20081015103516.76a842ef@hyperion.delvare> List-Id: References: <20081014224325.GC27799@ovro.caltech.edu> In-Reply-To: <20081014224325.GC27799@ovro.caltech.edu> MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 8bit To: lm-sensors@vger.kernel.org Hi Hans, (thanks for reviewing this driver) On Wed, 15 Oct 2008 10:22:47 +0200, Hans de Goede wrote: > Ira Snyder wrote: > > +power1_input 12v power usage (mW) > > +power2_input 5v power usage (mW) > > +power3_input 3v power usage (mW) > > +power4_input Vee (-12v) power usage (mW) > > These should be in micro Watt so μW not mW, I know this is not consistentent > with all other input's being in milli something, but the first piece of > supported power measuring hardware we had has sub milliWatt precision, hence > this decision. This is actually totally consistent: mV * mA = µW. -- Jean Delvare _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors