From: Christian Lamparter <chunkeey@web.de>
To: linux-wireless@vger.kernel.org
Cc: John W Linville <linville@tuxdriver.com>,
Larry Finger <Larry.Finger@lwfinger.net>,
Pavel Roskin <proski@gnu.org>,
Johannes Berg <johannes@sipsolutions.net>
Subject: [PATCH 2/3] p54: put broadcast frames into the right queues
Date: Fri, 17 Oct 2008 01:15:38 +0200 [thread overview]
Message-ID: <200810170115.38317.chunkeey@web.de> (raw)
stlc45xx's specs finally brought some light what all the 4 extra queues for.
multicast & managment frames go now into their own queue.
Signed-off-by: Christian Lamparter <chunkeey@web.de>
---
diff -Nurp a/drivers/net/wireless/p54/p54common.c b/drivers/net/wireless/p54/p54common.c
--- a/drivers/net/wireless/p54/p54common.c 2008-10-17 00:32:12.000000000 +0200
+++ b/drivers/net/wireless/p54/p54common.c 2008-10-17 00:32:53.000000000 +0200
@@ -902,6 +902,62 @@ free:
}
EXPORT_SYMBOL_GPL(p54_read_eeprom);
+#ifndef WLAN_FC_GET_TYPE
+#define WLAN_FC_GET_TYPE(fc) (fc & IEEE80211_FCTL_FTYPE)
+#define WLAN_FC_GET_STYPE(fc) (fc & IEEE80211_FCTL_STYPE)
+#endif
+
+static int p54_tx_fill(struct ieee80211_hw *dev, struct sk_buff *skb,
+ struct ieee80211_tx_info *info, u8 *queue, size_t *extra_len,
+ u16 *flags, u16 *aid)
+{
+ struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
+ struct p54_common *priv = dev->priv;
+ u16 fc = le16_to_cpu(hdr->frame_control);
+ int ret = 0;
+
+ if (unlikely(WLAN_FC_GET_TYPE(fc) == IEEE80211_FTYPE_MGMT)) {
+ switch (WLAN_FC_GET_STYPE(fc)) {
+ case IEEE80211_STYPE_BEACON:
+ *aid = 0;
+ *queue = 0;
+ *extra_len = IEEE80211_MAX_TIM_LEN;
+ *flags = P54_HDR_FLAG_DATA_OUT_TIMESTAMP;
+ return 0;
+ case IEEE80211_STYPE_PROBE_RESP:
+ *aid = 0;
+ *queue = 2;
+ *flags = P54_HDR_FLAG_DATA_OUT_TIMESTAMP |
+ P54_HDR_FLAG_DATA_OUT_NOCANCEL;
+ return 0;
+ default:
+ *queue = 2;
+ ret = 0;
+ }
+ } else {
+ *queue += 4;
+ ret = 1;
+ }
+
+ switch (priv->mode) {
+ case NL80211_IFTYPE_STATION:
+ *aid = 1;
+ break;
+ case NL80211_IFTYPE_AP:
+ if (is_multicast_ether_addr(hdr->addr1)) {
+ *aid = 0;
+ *queue = 3;
+ return 0;
+ }
+ case NL80211_IFTYPE_ADHOC:
+ if (info->control.sta)
+ *aid = info->control.sta->aid;
+ else
+ *flags = P54_HDR_FLAG_DATA_OUT_NOCANCEL;
+ }
+ return ret;
+}
+
static int p54_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
{
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
@@ -909,22 +965,26 @@ static int p54_tx(struct ieee80211_hw *d
struct p54_common *priv = dev->priv;
struct p54_hdr *hdr;
struct p54_tx_data *txhdr;
- size_t padding, len;
+ size_t padding, len, tim_len;
int i, j, ridx;
- u16 hdr_flags = 0;
- u8 rate;
+ u16 hdr_flags = 0, aid = 0;
+ u8 rate, queue;
u8 cts_rate = 0x20;
u8 rc_flags;
u8 calculated_tries[4];
u8 nrates = 0, nremaining = 8;
- current_queue = &priv->tx_stats[skb_get_queue_mapping(skb) + 4];
- if (unlikely(current_queue->len > current_queue->limit))
- return NETDEV_TX_BUSY;
- current_queue->len++;
- current_queue->count++;
- if (current_queue->len == current_queue->limit)
- ieee80211_stop_queue(dev, skb_get_queue_mapping(skb));
+ queue = skb_get_queue_mapping(skb);
+
+ if (p54_tx_fill(dev, skb, info, &queue, &tim_len, &hdr_flags, &aid)) {
+ current_queue = &priv->tx_stats[queue];
+ if (unlikely(current_queue->len > current_queue->limit))
+ return NETDEV_TX_BUSY;
+ current_queue->len++;
+ current_queue->count++;
+ if (current_queue->len == current_queue->limit)
+ ieee80211_stop_queue(dev, skb_get_queue_mapping(skb));
+ }
padding = (unsigned long)(skb->data - (sizeof(*hdr) + sizeof(*txhdr))) & 3;
len = skb->len;
@@ -935,7 +995,7 @@ static int p54_tx(struct ieee80211_hw *d
if (padding)
hdr_flags |= P54_HDR_FLAG_DATA_ALIGN;
hdr->len = cpu_to_le16(len);
- hdr->type = (info->flags & IEEE80211_TX_CTL_NO_ACK) ? 0 : cpu_to_le16(1);
+ hdr->type = cpu_to_le16(aid);
hdr->rts_tries = info->control.rates[0].count;
/*
@@ -1013,7 +1073,7 @@ static int p54_tx(struct ieee80211_hw *d
txhdr->rts_rate_idx = 0;
txhdr->key_type = 0;
txhdr->key_len = 0;
- txhdr->hw_queue = skb_get_queue_mapping(skb) + 4;
+ txhdr->hw_queue = queue;
txhdr->backlog = 32;
memset(txhdr->durations, 0, sizeof(txhdr->durations));
txhdr->tx_antenna = (info->antenna_sel_tx == 0) ?
@@ -1024,7 +1084,7 @@ static int p54_tx(struct ieee80211_hw *d
txhdr->align[0] = padding;
/* modifies skb->cb and with it info, so must be last! */
- if (unlikely(p54_assign_address(dev, skb, hdr, skb->len))) {
+ if (unlikely(p54_assign_address(dev, skb, hdr, skb->len + tim_len))) {
skb_pull(skb, sizeof(*hdr) + sizeof(*txhdr) + padding);
if (current_queue) {
current_queue->len--;
@@ -1341,7 +1401,7 @@ static int p54_config(struct ieee80211_h
mutex_lock(&priv->conf_mutex);
priv->rx_antenna = 2; /* automatic */
priv->output_power = conf->power_level << 2;
- ret = p54_set_freq(dev, conf->channel->center_freq);
+ ret = p54_set_freq(dev, cpu_to_le16(conf->channel->center_freq));
if (!ret)
ret = p54_set_edcf(dev);
mutex_unlock(&priv->conf_mutex);
next reply other threads:[~2008-10-16 23:11 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-10-16 23:15 Christian Lamparter [this message]
2008-10-17 1:54 ` [PATCH 2/3 v2] p54: put broadcast frames into the right queues Christian Lamparter
2008-10-18 12:21 ` Johannes Berg
2008-10-18 21:04 ` Christian Lamparter
2008-10-18 21:18 ` [PATCH 2/3 v3] " Christian Lamparter
2008-10-22 21:20 ` John W. Linville
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200810170115.38317.chunkeey@web.de \
--to=chunkeey@web.de \
--cc=Larry.Finger@lwfinger.net \
--cc=johannes@sipsolutions.net \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
--cc=proski@gnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.