From: Kyungmin Park <kmpark@infradead.org>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] [UBI] UBI command support
Date: Tue, 21 Oct 2008 18:18:59 +0900 [thread overview]
Message-ID: <20081021091859.GA29306@july> (raw)
UBI command support
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
---
common/Makefile | 1 +
common/cmd_ubi.c | 535 ++++++++++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 536 insertions(+), 0 deletions(-)
create mode 100644 common/cmd_ubi.c
diff --git a/common/Makefile b/common/Makefile
index f00cbd9..b02a541 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -139,6 +139,7 @@ COBJS-$(CONFIG_CMD_SETEXPR) += cmd_setexpr.o
COBJS-$(CONFIG_CMD_SPI) += cmd_spi.o
COBJS-$(CONFIG_CMD_STRINGS) += cmd_strings.o
COBJS-$(CONFIG_CMD_TERMINAL) += cmd_terminal.o
+COBJS-$(CONFIG_CMD_UBI) += cmd_ubi.o
COBJS-$(CONFIG_CMD_UNIVERSE) += cmd_universe.o
ifdef CONFIG_CMD_USB
COBJS-y += cmd_usb.o
diff --git a/common/cmd_ubi.c b/common/cmd_ubi.c
new file mode 100644
index 0000000..795805e
--- /dev/null
+++ b/common/cmd_ubi.c
@@ -0,0 +1,535 @@
+/*
+ * Unsorted Block Image commands
+ */
+
+#include <common.h>
+#include <command.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <ubi_uboot.h>
+#include <asm/errno.h>
+
+/* board/\*\/ubi.c */
+extern int ubi_board_scan(void);
+
+/* drivers/mtd/ubi/build.c */
+extern struct ubi_device *ubi_devices[];
+
+/* Private own data */
+static struct ubi_device *ubi;
+static int ubi_initialized;
+
+static void ubi_dump_vol_info(const struct ubi_volume *vol)
+{
+ dbg_msg("volume information dump:");
+ dbg_msg("vol_id %d", vol->vol_id);
+ dbg_msg("reserved_pebs %d", vol->reserved_pebs);
+ dbg_msg("alignment %d", vol->alignment);
+ dbg_msg("data_pad %d", vol->data_pad);
+ dbg_msg("vol_type %d", vol->vol_type);
+ dbg_msg("name_len %d", vol->name_len);
+ dbg_msg("usable_leb_size %d", vol->usable_leb_size);
+ dbg_msg("used_ebs %d", vol->used_ebs);
+ dbg_msg("used_bytes %lld", vol->used_bytes);
+ dbg_msg("last_eb_bytes %d", vol->last_eb_bytes);
+ dbg_msg("corrupted %d", vol->corrupted);
+ dbg_msg("upd_marker %d", vol->upd_marker);
+
+ if (vol->name_len <= UBI_VOL_NAME_MAX &&
+ strnlen(vol->name, vol->name_len + 1) == vol->name_len) {
+ dbg_msg("name %s", vol->name);
+ } else {
+ dbg_msg("the 1st 5 characters of the name: %c%c%c%c%c",
+ vol->name[0], vol->name[1], vol->name[2],
+ vol->name[3], vol->name[4]);
+ }
+ printf("\n");
+}
+
+static void display_volume_info(struct ubi_device *ubi)
+{
+ int i;
+
+ for (i = 0; i < (ubi->vtbl_slots + 1); i++) {
+ if (!ubi->volumes[i])
+ continue; /* Empty record */
+ ubi_dump_vol_info(ubi->volumes[i]);
+ }
+}
+
+static void display_ubi_info(struct ubi_device *ubi)
+{
+ ubi_msg("MTD device name: \"%s\"", ubi->mtd->name);
+ ubi_msg("MTD device size: %llu MiB", ubi->flash_size >> 20);
+ ubi_msg("physical eraseblock size: %d bytes (%d KiB)",
+ ubi->peb_size, ubi->peb_size >> 10);
+ ubi_msg("logical eraseblock size: %d bytes", ubi->leb_size);
+ ubi_msg("number of good PEBs: %d", ubi->good_peb_count);
+ ubi_msg("number of bad PEBs: %d", ubi->bad_peb_count);
+ ubi_msg("smallest flash I/O unit: %d", ubi->min_io_size);
+ ubi_msg("VID header offset: %d (aligned %d)",
+ ubi->vid_hdr_offset, ubi->vid_hdr_aloffset);
+ ubi_msg("data offset: %d", ubi->leb_start);
+ ubi_msg("max. allowed volumes: %d", ubi->vtbl_slots);
+ ubi_msg("wear-leveling threshold: %d", CONFIG_MTD_UBI_WL_THRESHOLD);
+ ubi_msg("number of internal volumes: %d", UBI_INT_VOL_COUNT);
+ ubi_msg("number of user volumes: %d",
+ ubi->vol_count - UBI_INT_VOL_COUNT);
+ ubi_msg("available PEBs: %d", ubi->avail_pebs);
+ ubi_msg("total number of reserved PEBs: %d", ubi->rsvd_pebs);
+ ubi_msg("number of PEBs reserved for bad PEB handling: %d",
+ ubi->beb_rsvd_pebs);
+ ubi_msg("max/mean erase counter: %d/%d", ubi->max_ec, ubi->mean_ec);
+}
+
+static int ubi_info(int layout)
+{
+ if (layout)
+ display_volume_info(ubi);
+ else
+ display_ubi_info(ubi);
+
+ return 0;
+}
+
+static int ustrtoul(const char *cp, char **endp, unsigned int base)
+{
+ unsigned long result = simple_strtoul(cp, endp, base);
+ switch (**endp) {
+ case 'G' :
+ result *= 1024;
+ case 'M':
+ result *= 1024;
+ case 'K':
+ case 'k':
+ result *= 1024;
+ if ((*endp)[1] == 'i') {
+ if ((*endp)[2] == 'B')
+ (*endp) += 3;
+ else
+ (*endp) += 2;
+ }
+ }
+ return result;
+}
+
+static int parse_num(size_t *num, const char *token)
+{
+ char *endp;
+ size_t n;
+
+ n = (size_t) ustrtoul(token, &endp, 0);
+ if (*endp)
+ return -EINVAL;
+
+ *num = n;
+ return 0;
+}
+
+static int verify_mkvol_req(const struct ubi_device *ubi,
+ const struct ubi_mkvol_req *req)
+{
+ int n, err = -EINVAL;
+
+ if (req->bytes < 0 || req->alignment < 0 || req->vol_type < 0 ||
+ req->name_len < 0)
+ goto bad;
+
+ if ((req->vol_id < 0 || req->vol_id >= ubi->vtbl_slots) &&
+ req->vol_id != UBI_VOL_NUM_AUTO)
+ goto bad;
+
+ if (req->alignment == 0)
+ goto bad;
+
+ if (req->bytes == 0)
+ goto bad;
+
+ if (req->vol_type != UBI_DYNAMIC_VOLUME &&
+ req->vol_type != UBI_STATIC_VOLUME)
+ goto bad;
+
+ if (req->alignment > ubi->leb_size)
+ goto bad;
+
+ n = req->alignment % ubi->min_io_size;
+ if (req->alignment != 1 && n)
+ goto bad;
+
+ if (req->name_len > UBI_VOL_NAME_MAX) {
+ err = -ENAMETOOLONG;
+ goto bad;
+ }
+
+ return 0;
+bad:
+ printf("bad volume creation request");
+// ubi_dbg_dump_mkvol_req(req);
+ return err;
+}
+
+static int ubi_create_vol(char *volume, int size, int dynamic)
+{
+ struct ubi_mkvol_req req;
+ int err;
+
+ if (dynamic)
+ req.vol_type = UBI_DYNAMIC_VOLUME;
+ else
+ req.vol_type = UBI_STATIC_VOLUME;
+
+ req.vol_id = UBI_VOL_NUM_AUTO;
+ req.alignment = 1;
+ req.bytes = size;
+
+ strcpy(req.name, volume);
+ req.name_len = strlen(volume);
+ req.name[req.name_len] = '\0';
+ req.padding1 = 0;
+ /* It's duplicated at drivers/mtd/ubi/cdev.c */
+ err = verify_mkvol_req(ubi, &req);
+ if (err) {
+ printf("verify_mkvol_req failed %d\n", err);
+ return err;
+ }
+ printf("Creating %s volume %s of size %d\n",
+ dynamic ? "dynamic" : "static", volume, size);
+ /* Call real ubi create volume */
+ return ubi_create_volume(ubi, &req);
+}
+
+static int ubi_remove_vol(char *volume)
+{
+ int i, err, reserved_pebs;
+ int found = 0, vol_id = 0;
+ struct ubi_volume *vol;
+
+ for (i = 0; i < ubi->vtbl_slots; i++) {
+ vol = ubi->volumes[i];
+ if (vol && !strcmp(vol->name, volume)) {
+ printf("Volume %s found at valid %d\n", volume, i);
+ vol_id = i;
+ found = 1;
+ break;
+ }
+ }
+ if (!found) {
+ printf("%s volume not found\n", volume);
+ return -ENODEV;
+ }
+ printf("remove UBI volume %s (id %d)\n", vol->name, vol->vol_id);
+
+ if (ubi->ro_mode) {
+ printf("It's read-only mode\n");
+ err = -EROFS;
+ goto out_err;
+ }
+
+ err = ubi_change_vtbl_record(ubi, vol_id, NULL);
+ if (err) {
+ printf("Error changing Vol tabel record err=%x\n", err);
+ goto out_err;
+ }
+ reserved_pebs = vol->reserved_pebs;
+ for (i = 0; i < vol->reserved_pebs; i++) {
+ err = ubi_eba_unmap_leb(ubi, vol, i);
+ if (err)
+ goto out_err;
+ }
+
+ kfree(vol->eba_tbl);
+ ubi->volumes[vol_id]->eba_tbl = NULL;
+ ubi->volumes[vol_id] = NULL;
+
+ ubi->rsvd_pebs -= reserved_pebs;
+ ubi->avail_pebs += reserved_pebs;
+ i = ubi->beb_rsvd_level - ubi->beb_rsvd_pebs;
+ if (i > 0) {
+ i = ubi->avail_pebs >= i ? i : ubi->avail_pebs;
+ ubi->avail_pebs -= i;
+ ubi->rsvd_pebs += i;
+ ubi->beb_rsvd_pebs += i;
+ if (i > 0)
+ ubi_msg("reserve more %d PEBs", i);
+ }
+ ubi->vol_count -= 1;
+
+ return 0;
+out_err:
+ ubi_err("cannot remove volume %d, error %d", vol_id, err);
+ return err;
+}
+
+static int ubi_volume_write(char *volume, void *buf, size_t size)
+{
+ int i = 0, err = -1;
+ int rsvd_bytes = 0;
+ int found = 0;
+ struct ubi_volume *vol;
+
+ for (i = 0; i < ubi->vtbl_slots; i++) {
+ vol = ubi->volumes[i];
+ if (vol && !strcmp(vol->name, volume)) {
+ printf("Volume \"%s\" found at volume id %d\n", volume, i);
+ found = 1;
+ break;
+ }
+ }
+ if (!found) {
+ printf("%s voume not found\n", volume);
+ return 1;
+ }
+ rsvd_bytes = vol->reserved_pebs * (ubi->leb_size - vol->data_pad);
+ if (size < 0 || size > rsvd_bytes) {
+ printf("rsvd_bytes=%d vol->reserved_pebs=%d ubi->leb_size=%d\n",
+ rsvd_bytes, vol->reserved_pebs, ubi->leb_size);
+ printf("vol->data_pad=%d\n", vol->data_pad);
+ printf("Size > volume size !!\n");
+ return 1;
+ }
+
+ err = ubi_start_update(ubi, vol, size);
+ if (err < 0) {
+ printf("Cannot start volume update\n");
+ return err;
+ }
+
+ err = ubi_more_update_data(ubi, vol, buf, size);
+ if (err < 0) {
+ printf("Couldnt or partially wrote data \n");
+ return err;
+ }
+
+ if (err) {
+ size = err;
+
+ err = ubi_check_volume(ubi, vol->vol_id);
+ if ( err < 0 )
+ return err;
+
+ if (err) {
+ ubi_warn("volume %d on UBI device %d is corrupted",
+ vol->vol_id, ubi->ubi_num);
+ vol->corrupted = 1;
+ }
+
+ vol->checked = 1;
+ ubi_gluebi_updated(vol);
+ }
+
+ return 0;
+}
+
+static int ubi_volume_read(char *volume, char *buf, size_t size)
+{
+ int err, lnum, off, len, tbuf_size, i = 0;
+ size_t count_save = size;
+ void *tbuf;
+ unsigned long long tmp;
+ struct ubi_volume *vol = NULL;
+ loff_t offp = 0;
+
+ for (i = 0; i < ubi->vtbl_slots; i++) {
+ vol = ubi->volumes[i];
+ if (vol && !strcmp(vol->name, volume)) {
+ printf("Volume %s found at volume id %d\n",
+ volume, vol->vol_id);
+ break;
+ }
+ }
+ if (i == ubi->vtbl_slots) {
+ printf("%s voume not found\n", volume);
+ return 0;
+ }
+
+ printf("read %i bytes from volume %d to %x(buf address)\n",
+ (int) size, vol->vol_id, (unsigned)buf);
+
+ if (vol->updating) {
+ printf("updating");
+ return -EBUSY;
+ }
+ if (vol->upd_marker) {
+ printf("damaged volume, update marker is set");
+ return -EBADF;
+ }
+ if (offp == vol->used_bytes)
+ return 0;
+
+ if (size == 0) {
+ printf("Read [%lu] bytes\n", (unsigned long) vol->used_bytes);
+ size = vol->used_bytes;
+ }
+
+ if (vol->corrupted)
+ printf("read from corrupted volume %d", vol->vol_id);
+ if (offp + size > vol->used_bytes)
+ count_save = size = vol->used_bytes - offp;
+
+ tbuf_size = vol->usable_leb_size;
+ if (size < tbuf_size)
+ tbuf_size = ALIGN(size, ubi->min_io_size);
+ tbuf = vmalloc(tbuf_size);
+ if (!tbuf) {
+ printf("NO MEM\n");
+ return -ENOMEM;
+ }
+ len = size > tbuf_size ? tbuf_size : size;
+
+ tmp = offp;
+ off = do_div(tmp, vol->usable_leb_size);
+ lnum = tmp;
+ printf("off=%d lnum=%d\n", off, lnum);
+ do {
+ if (off + len >= vol->usable_leb_size)
+ len = vol->usable_leb_size - off;
+
+ err = ubi_eba_read_leb(ubi, vol, lnum, tbuf, off, len, 0);
+ if (err) {
+ printf("read err %x\n", err);
+ break;
+ }
+ off += len;
+ if (off == vol->usable_leb_size) {
+ lnum += 1;
+ off -= vol->usable_leb_size;
+ }
+
+ size -= len;
+ offp += len;
+
+ printf("buf = %x\n", (unsigned)buf);
+ memcpy(buf, tbuf, len);
+ printf("buf[0] = %x\n", buf[0]);
+
+ buf += len;
+ len = size > tbuf_size ? tbuf_size : size;
+ } while (size);
+
+ vfree(tbuf);
+ return err ? err : count_save - size;
+}
+
+static int do_ubi(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+{
+ size_t size = 0;
+ ulong addr = 0;
+ int err = 0;
+
+ if (!ubi_initialized) {
+ err = ubi_board_scan();
+ if (err) {
+ printf("ubi initialize error %d\n", err);
+ return err;
+ }
+ ubi = ubi_devices[0];
+ ubi_initialized = 1;
+ }
+
+ if (argc < 2) {
+ printf("Usage:\n%s\n", cmdtp->usage);
+ return 1;
+ }
+ if (strcmp(argv[1], "info") == 0) {
+ int layout = 0;
+ if (argc > 2 && !strncmp(argv[2], "l", 1))
+ layout = 1;
+ return ubi_info(layout);
+ }
+ if (strncmp(argv[1], "create", 6) == 0) {
+ int dynamic = 1; /* default: dynamic volume */
+
+ /* Use maximum available size */
+ size = 0;
+
+ /* E.g., create volume size type */
+ if (argc == 5) {
+ if (strncmp(argv[4], "s", 1) == 0)
+ dynamic = 0;
+ else if (strncmp(argv[4], "d", 1) != 0) {
+ printf("You give wrong type\n");
+ return 1;
+ }
+ argc--;
+ }
+ /* E.g., create volume size */
+ if (argc == 4) {
+ err = parse_num(&size, argv[3]);
+ if (err) {
+ printf("You give correct size\n");
+ return err;
+ }
+ argc--;
+ }
+ /* Use maximum available size */
+ if (!size)
+ size = ubi->avail_pebs * ubi->leb_size;
+ /* E.g., create volume */
+ if (argc == 3)
+ return ubi_create_vol(argv[2], size, dynamic);
+ }
+ if (strncmp(argv[1], "remove", 6) == 0) {
+ /* E.g., remove volume */
+ if (argc == 3)
+ return ubi_remove_vol(argv[2]);
+ }
+ if (strncmp(argv[1], "write", 5) == 0) {
+ if (argc < 5) {
+ printf("You give wrong parameters\n");
+ return 1;
+ }
+
+ addr = simple_strtoul(argv[2], NULL, 16);
+ err = parse_num(&size, argv[4]);
+ if (err) {
+ printf("You give wrong size\n");
+ return err;
+ }
+
+ return ubi_volume_write(argv[3], (void *)addr, size);
+ }
+ if (strncmp(argv[1], "read", 4) == 0) {
+ size = 0;
+
+ /* E.g., read volume size */
+ if (argc == 5) {
+ err = parse_num(&size, argv[4]);
+ if (err) {
+ printf("You give wrong size\n");
+ return err;
+ }
+ argc--;
+ }
+
+ /* E.g., read volume */
+ if (argc == 4) {
+ addr = simple_strtoul(argv[2], NULL, 16);
+ argc--;
+ }
+
+ if (argc == 3)
+ return ubi_volume_read(argv[3], (char *)addr, size);
+ }
+
+ printf("Unknown UBI command or invalid number of arguments\n");
+ return 1;
+}
+
+U_BOOT_CMD(ubi, 6, 1, do_ubi,
+ "ubi - ubi commands\n",
+ "info [l[ayout]]"
+ " - Display volume and ubi layout information\n"
+ "ubi create[vol] volume [size] [type]"
+ " - create volume name with size\n"
+ "ubi write[vol] address volume size"
+ " - Write volume from address with size\n"
+ "ubi read[vol] address volume [size]"
+ " - Read volume to address with size\n"
+ "ubi remove[vol] volume"
+ " - Remove volume\n"
+ "[Legends]\n"
+ " volume: charater name\n"
+ " size: KiB, MiB, GiB, and bytes\n"
+ " type: s[tatic] or d[ynamic] (default=dynamic)\n"
+);
--
1.5.3.3
next reply other threads:[~2008-10-21 9:18 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-10-21 9:18 Kyungmin Park [this message]
2008-10-21 10:24 ` [U-Boot] [PATCH] [UBI] UBI command support Wolfgang Denk
2008-10-22 0:56 ` Kyungmin Park
2008-10-22 6:47 ` Wolfgang Denk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20081021091859.GA29306@july \
--to=kmpark@infradead.org \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.