From: Ingo Molnar <mingo@elte.hu>
To: Mike Travis <travis@sgi.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>,
Andrew Morton <akpm@linux-foundation.org>,
linux-kernel@vger.kernel.org
Subject: Re: [bug] Re: [PATCH 00/35] cpumask: Replace cpumask_t with struct cpumask
Date: Thu, 23 Oct 2008 16:32:13 +0200 [thread overview]
Message-ID: <20081023143213.GA24830@elte.hu> (raw)
In-Reply-To: <20081023142842.GC22088@elte.hu>
* Ingo Molnar <mingo@elte.hu> wrote:
> i've attached the config that will build and boot with the
> tip/cpus4096-v2 branch.
>
> (I'm now double-checking whether it reproduces those slab corruption
> messages.)
yes, it still does that slab corruption message, see the bootlog below.
Ingo
[ 0.000000] BIOS EBDA/lowmem at: 0009f800/0009f800
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Linux version 2.6.27-06574-g8c86407 (mingo@dione) (gcc version 4.2.3) #45103 SMP Thu Oct 23 16:24:51 CEST 2008
[ 0.000000] Command line: root=/dev/sda6 earlyprintk=serial,ttyS0,115200,keep console=tty debug initcall_debug apic=verbose sysrq_always_enabled ignore_loglevel selinux=0 nmi_watchdog=2 idle=poll panic=1
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
[ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] console [earlyser0] enabled
[ 0.000000] debug: ignoring loglevel setting.
[ 0.000000] using polling idle threads.
[ 0.000000] last_pfn = 0x3fff0 max_arch_pfn = 0x3ffffffff
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] init_memory_mapping
[ 0.000000] 0000000000 - 003fff0000 page 4k
[ 0.000000] kernel direct mapping tables up to 3fff0000 @ 233e000-2540000
[ 0.000000] last_map_addr: 3fff0000 end: 3fff0000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000003fff0000
[ 0.000000] Bootmem setup node 0 0000000000000000-000000003fff0000
[ 0.000000] NODE_DATA [0000000000008000 - 000000000003cfff]
[ 0.000000] bootmap [000000000003d000 - 0000000000044fff] pages 8
[ 0.000000] (5 early reservations) ==> bootmem [0000000000 - 003fff0000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0000200000 - 000233d950] TEXT DATA BSS ==> [0000200000 - 000233d950]
[ 0.000000] #3 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
[ 0.000000] #4 [000233e000 - 000253e000] PGTABLE ==> [000233e000 - 000253e000]
[ 0.000000] Scan SMP from ffff880000000000 for 1024 bytes.
[ 0.000000] Scan SMP from ffff88000009fc00 for 1024 bytes.
[ 0.000000] Scan SMP from ffff8800000f0000 for 65536 bytes.
[ 0.000000] found SMP MP-table at [ffff8800000f5680] 000f5680
[ 0.000000] [ffffe20000000000-ffffe200017fffff] PMD -> [ffff880002800000-ffff880003ffffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003fff0
[ 0.000000] On node 0 totalpages: 262031
[ 0.000000] DMA zone: 96 pages used for memmap
[ 0.000000] DMA zone: 101 pages reserved
[ 0.000000] DMA zone: 3802 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 6048 pages used for memmap
[ 0.000000] DMA32 zone: 251984 pages, LIFO batch:31
[ 0.000000] Normal zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] Intel MultiProcessor Specification v1.4
[ 0.000000] MPTABLE: OEM ID: OEM00000
[ 0.000000] MPTABLE: Product ID: PROD00000000
[ 0.000000] MPTABLE: APIC at: 0xFEE00000
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] Processor #1
[ 0.000000] Bus #0 is PCI
[ 0.000000] Bus #1 is PCI
[ 0.000000] Bus #2 is PCI
[ 0.000000] Bus #3 is PCI
[ 0.000000] Bus #4 is PCI
[ 0.000000] Bus #5 is PCI
[ 0.000000] Bus #6 is ISA
[ 0.000000] I/O APIC #2 Version 17 at 0xFEC00000.
[ 0.000000] Int: type 0, pol 3, trig 3, bus 00, IRQ 28, APIC ID 2, APIC INT 0b
[ 0.000000] Int: type 0, pol 3, trig 3, bus 00, IRQ 10, APIC ID 2, APIC INT 03
[ 0.000000] Int: type 0, pol 3, trig 3, bus 01, IRQ 00, APIC ID 2, APIC INT 05
[ 0.000000] Int: type 0, pol 3, trig 3, bus 05, IRQ 1c, APIC ID 2, APIC INT 0b
[ 0.000000] Int: type 3, pol 0, trig 0, bus 06, IRQ 00, APIC ID 2, APIC INT 00
[ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 01, APIC ID 2, APIC INT 01
[ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 00, APIC ID 2, APIC INT 02
[ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 04, APIC ID 2, APIC INT 04
[ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 06, APIC ID 2, APIC INT 06
[ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 07, APIC ID 2, APIC INT 07
[ 0.000000] Int: type 0, pol 1, trig 1, bus 06, IRQ 08, APIC ID 2, APIC INT 08
[ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 09, APIC ID 2, APIC INT 09
[ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 0a, APIC ID 2, APIC INT 0a
[ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 0c, APIC ID 2, APIC INT 0c
[ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 0d, APIC ID 2, APIC INT 0d
[ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 0e, APIC ID 2, APIC INT 0e
[ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 0f, APIC ID 2, APIC INT 0f
[ 0.000000] Lint: type 3, pol 0, trig 0, bus 00, IRQ 00, APIC ID ff, APIC LINT 00
[ 0.000000] Lint: type 1, pol 0, trig 0, bus 00, IRQ 00, APIC ID ff, APIC LINT 01
[ 0.000000] Processors: 2
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] mapped APIC to ffffffffff5fc000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffffffff5fb000 (fec00000)
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
[ 0.000000] PERCPU: Allocating 1646592 bytes of per cpu data
[ 0.000000] NR_CPUS:4096 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] per cpu data for cpu0 on node0 at 0000000002642000
[ 0.000000] per cpu data for cpu1 on node0 at 0000000004000000
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 255786
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: root=/dev/sda6 earlyprintk=serial,ttyS0,115200,keep console=tty debug initcall_debug apic=verbose sysrq_always_enabled ignore_loglevel selinux=0 nmi_watchdog=2 idle=poll panic=1
[ 0.000000] debug: sysrq always enabled.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2010.301 MHz processor.
[ 0.004000] spurious 8259A interrupt: IRQ7.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.004000] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.004000] ... MAX_LOCK_DEPTH: 48
[ 0.004000] ... MAX_LOCKDEP_KEYS: 8191
[ 0.004000] ... CLASSHASH_SIZE: 4096
[ 0.004000] ... MAX_LOCKDEP_ENTRIES: 8192
[ 0.004000] ... MAX_LOCKDEP_CHAINS: 16384
[ 0.004000] ... CHAINHASH_SIZE: 8192
[ 0.004000] memory used by lock dependency info: 4095 kB
[ 0.004000] per task-struct memory footprint: 2688 bytes
[ 0.004000] Checking aperture...
[ 0.004000] No AGP bridge found
[ 0.004000] Node 0: aperture @ 20000000 size 32 MB
[ 0.004000] Aperture pointing to e820 RAM. Ignoring.
[ 0.004000] Memory: 983380k/1048512k available (6008k kernel code, 64744k reserved, 8753k data, 2096k init)
[ 0.004000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.004016] Calibrating delay loop (skipped), value calculated using timer frequency.. 4020.60 BogoMIPS (lpj=8041204)
[ 0.012147] Security Framework initialized
[ 0.016024] SELinux: Initializing.
[ 0.020108] SELinux: Starting in permissive mode
[ 0.024562] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.028916] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.032375] Mount-cache hash table entries: 256
[ 0.040538] Initializing cgroup subsys debug
[ 0.044006] Initializing cgroup subsys devices
[ 0.048007] Initializing cgroup subsys freezer
[ 0.052030] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.056005] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.060005] CPU 0/0x0 -> Node 0
[ 0.064005] tseg: 0000000000
[ 0.066871] CPU: Physical Processor ID: 0
[ 0.068004] CPU: Processor Core ID: 0
[ 0.072010] numa_add_cpu cpu 0 node 0: mask now 0
[ 0.076037] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.080014] ftrace: allocating 16064 hash entries in 126 pages
[ 0.104309] Setting APIC routing to flat
[ 0.108009] enabled ExtINT on CPU#0
[ 0.112065] ExtINT not setup in hardware but reported by MP table
[ 0.116115] ENABLING IO-APIC IRQs
[ 0.120004] init IO_APIC IRQs
[ 0.124005] 2-0 (apicid-pin) not connected
[ 0.128016] IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0)
[ 0.132012] IOAPIC[0]: Set routing entry (2-2 -> 0x30 -> IRQ 0 Mode:0 Active:0)
[ 0.136011] IOAPIC[0]: Set routing entry (2-3 -> 0x33 -> IRQ 3 Mode:1 Active:1)
[ 0.140000] IOAPIC[0]: Set routing entry (2-4 -> 0x34 -> IRQ 4 Mode:0 Active:0)
[ 0.140000] IOAPIC[0]: Set routing entry (2-5 -> 0x35 -> IRQ 5 Mode:1 Active:1)
[ 0.140000] IOAPIC[0]: Set routing entry (2-6 -> 0x36 -> IRQ 6 Mode:0 Active:0)
[ 0.140000] IOAPIC[0]: Set routing entry (2-7 -> 0x37 -> IRQ 7 Mode:0 Active:0)
[ 0.140000] IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0)
[ 0.140000] IOAPIC[0]: Set routing entry (2-9 -> 0x39 -> IRQ 9 Mode:0 Active:0)
[ 0.140000] IOAPIC[0]: Set routing entry (2-10 -> 0x3a -> IRQ 10 Mode:0 Active:0)
[ 0.140000] IOAPIC[0]: Set routing entry (2-11 -> 0x3b -> IRQ 11 Mode:1 Active:1)
[ 0.140000] IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0)
[ 0.140000] IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0)
[ 0.140000] IOAPIC[0]: Set routing entry (2-14 -> 0x3e -> IRQ 14 Mode:0 Active:0)
[ 0.140000] IOAPIC[0]: Set routing entry (2-15 -> 0x3f -> IRQ 15 Mode:0 Active:0)
[ 0.140000] 2-16 2-17 2-18 2-19 2-20 2-21 2-22 2-23 (apicid-pin) not connected
[ 0.140000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.140000] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[ 0.140000] ...trying to set up timer (IRQ0) through the 8259A ...
[ 0.140000] ..... (found apic 0 pin 0) ...
[ 0.183561] ....... works.
[ 0.184003] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
[ 0.192004] Using local APIC timer interrupts.
[ 0.192004] calibrating APIC timer ...
[ 0.200000] ... lapic delta = 1256518
[ 0.200000] ..... delta 1256518
[ 0.200000] ..... mult: 53963664
[ 0.200000] ..... calibration result: 804171
[ 0.200000] ..... CPU clock speed is 2010.1718 MHz.
[ 0.200000] ..... host bus clock speed is 201.0171 MHz.
[ 0.200000] ... verify APIC timer
[ 0.311432] ... jiffies delta = 25
[ 0.312003] ... jiffies result ok
[ 0.316023] calling migration_init+0x0/0x60 @ 1
[ 0.320167] initcall migration_init+0x0/0x60 returned 1 after 0 usecs
[ 0.324005] initcall migration_init+0x0/0x60 returned with error code 1
[ 0.328005] calling spawn_ksoftirqd+0x0/0x60 @ 1
[ 0.332087] initcall spawn_ksoftirqd+0x0/0x60 returned 0 after 0 usecs
[ 0.336008] calling init_call_single_data+0x0/0x80 @ 1
[ 0.340006] initcall init_call_single_data+0x0/0x80 returned 0 after 0 usecs
[ 0.344005] calling spawn_softlockup_task+0x0/0x80 @ 1
[ 0.348071] initcall spawn_softlockup_task+0x0/0x80 returned 0 after 0 usecs
[ 0.352005] calling relay_init+0x0/0x20 @ 1
[ 0.356008] initcall relay_init+0x0/0x20 returned 0 after 0 usecs
[ 0.360004] calling tracer_alloc_buffers+0x0/0x1f0 @ 1
[ 0.370658] Testing tracer nop: PASSED
[ 0.372703] initcall tracer_alloc_buffers+0x0/0x1f0 returned 0 after 7812 usecs
[ 0.376394] lockdep: fixing up alternatives.
[ 0.380146] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] masked ExtINT on CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 4020.87 BogoMIPS (lpj=8041750)
[ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.004000] CPU 1/0x1 -> Node 0
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.004000] numa_add_cpu cpu 1 node 0: mask now 0-1
[ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.476391] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
[ 0.488041] Brought up 2 CPUs
[ 0.490944] Total of 2 processors activated (8041.47 BogoMIPS).
[ 0.492070] Testing NMI watchdog ... OK.
[ 0.576156] CPU0 attaching sched-domain:
[ 0.580007] domain 0: span 0-1 level CPU
[ 0.584003] groups: 0 1
[ 0.586595] domain 1: span 0-1 level NODE
[ 0.589815] groups: 0-1
[ 0.592541] CPU1 attaching sched-domain:
[ 0.596010] domain 0: span 0-1 level CPU
[ 0.600003] groups: 1 0
[ 0.604003] domain 1: span 0-1 level NODE
[ 0.608015] groups: 0-1
[ 0.610691] =============================================================================
[ 0.612000] BUG kmalloc-8: Wrong object count. Counter is 15 but counted were 50
[ 0.612000] -----------------------------------------------------------------------------
[ 0.612000]
[ 0.612000] INFO: Slab 0xffffe200017dac80 objects=51 used=15 fp=0xffff88003f9cc4b0 flags=0x200000000000c3
[ 0.612000] Pid: 1, comm: swapper Not tainted 2.6.27-06574-g8c86407 #45103
[ 0.612000] Call Trace:
[ 0.612000] [<ffffffff802ca480>] slab_err+0xa0/0xb0
[ 0.612000] [<ffffffff8026cc5d>] ? trace_hardirqs_on+0xd/0x10
[ 0.612000] [<ffffffff8026cbbf>] ? trace_hardirqs_on_caller+0xcf/0x160
[ 0.612000] [<ffffffff8023aef2>] ? cpu_attach_domain+0x172/0x6b0
[ 0.612000] [<ffffffff802ca6dd>] ? check_bytes_and_report+0x3d/0xe0
[ 0.612000] [<ffffffff802ccb97>] on_freelist+0x197/0x240
[ 0.612000] [<ffffffff802cd8a6>] __slab_free+0x1a6/0x310
[ 0.612000] [<ffffffff80412ad9>] ? free_cpumask_var+0x9/0x10
[ 0.612000] [<ffffffff802cdac7>] kfree+0xb7/0x140
[ 0.612000] [<ffffffff80412ad9>] ? free_cpumask_var+0x9/0x10
[ 0.612000] [<ffffffff80412ad9>] free_cpumask_var+0x9/0x10
[ 0.612000] [<ffffffff8023b8cc>] __build_sched_domains+0x49c/0xd30
[ 0.612000] [<ffffffff8026cc5d>] ? trace_hardirqs_on+0xd/0x10
[ 0.612000] [<ffffffff81659afa>] sched_init_smp+0xba/0x2b0
[ 0.612000] [<ffffffff8026cbbf>] ? trace_hardirqs_on_caller+0xcf/0x160
[ 0.612000] [<ffffffff802ca6dd>] ? check_bytes_and_report+0x3d/0xe0
[ 0.612000] [<ffffffff802ca9b8>] ? check_object+0x238/0x270
[ 0.612000] [<ffffffff802caa44>] ? init_object+0x54/0x90
[ 0.612000] [<ffffffff8026cc5d>] ? trace_hardirqs_on+0xd/0x10
[ 0.612000] [<ffffffff8026cbbf>] ? trace_hardirqs_on_caller+0xcf/0x160
[ 0.612000] [<ffffffff8026cc5d>] ? trace_hardirqs_on+0xd/0x10
[ 0.612000] [<ffffffff81652384>] ? check_nmi_watchdog+0x204/0x260
[ 0.612000] [<ffffffff81652384>] ? check_nmi_watchdog+0x204/0x260
[ 0.612000] [<ffffffff8164fb76>] ? native_smp_cpus_done+0x1a6/0x2b0
[ 0.612000] [<ffffffff81644f16>] kernel_init+0x176/0x240
[ 0.612000] [<ffffffff8020c969>] child_rip+0xa/0x11
[ 0.612000] [<ffffffff8020be84>] ? restore_args+0x0/0x30
[ 0.612000] [<ffffffff81644da0>] ? kernel_init+0x0/0x240
[ 0.612000] [<ffffffff8020c95f>] ? child_rip+0x0/0x11
[ 0.612000] FIX kmalloc-8: Object count adjusted.
[ 0.612000] =============================================================================
[ 0.612000] BUG kmalloc-8: Redzone overwritten
[ 0.612000] -----------------------------------------------------------------------------
[ 0.612000]
[ 0.612000] INFO: 0xffff88003f9cc418-0xffff88003f9cc41f. First byte 0x0 instead of 0xcc
[ 0.612000] INFO: Slab 0xffffe200017dac80 objects=51 used=50 fp=0xffff88003f9cc4b0 flags=0x200000000000c3
[ 0.612000] INFO: Object 0xffff88003f9cc410 @offset=1040 fp=0x0000000000000000
[ 0.612000]
[ 0.612000] Bytes b4 0xffff88003f9cc400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[ 0.612000] Object 0xffff88003f9cc410: 00 00 00 00 00 00 00 00 ........
[ 0.612000] Redzone 0xffff88003f9cc418: 00 00 00 00 00 00 00 00 ........
[ 0.612000] Padding 0xffff88003f9cc458: 00 00 00 00 00 00 00 00 ........
[ 0.612000] Pid: 1, comm: swapper Not tainted 2.6.27-06574-g8c86407 #45103
[ 0.612000] Call Trace:
[ 0.612000] [<ffffffff802ca58c>] print_trailer+0xfc/0x160
[ 0.612000] [<ffffffff802ca758>] check_bytes_and_report+0xb8/0xe0
[ 0.612000] [<ffffffff802ca7ea>] check_object+0x6a/0x270
[ 0.612000] [<ffffffff802cd908>] __slab_free+0x208/0x310
[ 0.612000] [<ffffffff80412ad9>] ? free_cpumask_var+0x9/0x10
[ 0.612000] [<ffffffff802cdac7>] kfree+0xb7/0x140
[ 0.612000] [<ffffffff80412ad9>] ? free_cpumask_var+0x9/0x10
[ 0.612000] [<ffffffff80412ad9>] free_cpumask_var+0x9/0x10
[ 0.612000] [<ffffffff8023b8cc>] __build_sched_domains+0x49c/0xd30
[ 0.612000] [<ffffffff8026cc5d>] ? trace_hardirqs_on+0xd/0x10
[ 0.612000] [<ffffffff81659afa>] sched_init_smp+0xba/0x2b0
[ 0.612000] [<ffffffff8026cbbf>] ? trace_hardirqs_on_caller+0xcf/0x160
[ 0.612000] [<ffffffff802ca6dd>] ? check_bytes_and_report+0x3d/0xe0
[ 0.612000] [<ffffffff802ca9b8>] ? check_object+0x238/0x270
[ 0.612000] [<ffffffff802caa44>] ? init_object+0x54/0x90
[ 0.612000] [<ffffffff8026cc5d>] ? trace_hardirqs_on+0xd/0x10
[ 0.612000] [<ffffffff8026cbbf>] ? trace_hardirqs_on_caller+0xcf/0x160
[ 0.612000] [<ffffffff8026cc5d>] ? trace_hardirqs_on+0xd/0x10
[ 0.612000] [<ffffffff81652384>] ? check_nmi_watchdog+0x204/0x260
[ 0.612000] [<ffffffff81652384>] ? check_nmi_watchdog+0x204/0x260
[ 0.612000] [<ffffffff8164fb76>] ? native_smp_cpus_done+0x1a6/0x2b0
[ 0.612000] [<ffffffff81644f16>] kernel_init+0x176/0x240
[ 0.612000] [<ffffffff8020c969>] child_rip+0xa/0x11
[ 0.612000] [<ffffffff8020be84>] ? restore_args+0x0/0x30
[ 0.612000] [<ffffffff81644da0>] ? kernel_init+0x0/0x240
[ 0.612000] [<ffffffff8020c95f>] ? child_rip+0x0/0x11
[ 0.612000] FIX kmalloc-8: Restoring 0xffff88003f9cc418-0xffff88003f9cc41f=0xcc
[ 0.612000]
[ 0.612004] =============================================================================
[ 0.616000] BUG kmalloc-8: Redzone overwritten
[ 0.616000] -----------------------------------------------------------------------------
[ 0.616000]
[ 0.616000] INFO: 0xffff88003f9cc3c8-0xffff88003f9cc3cf. First byte 0x0 instead of 0xcc
[ 0.616000] INFO: Slab 0xffffe200017dac80 objects=51 used=50 fp=0xffff88003f9cc4b0 flags=0x200000000000c3
[ 0.616000] INFO: Object 0xffff88003f9cc3c0 @offset=960 fp=0x0000000000000000
[ 0.616000]
[ 0.616000] Bytes b4 0xffff88003f9cc3b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[ 0.616000] Object 0xffff88003f9cc3c0: 00 00 00 00 00 00 00 00 ........
[ 0.616000] Redzone 0xffff88003f9cc3c8: 00 00 00 00 00 00 00 00 ........
[ 0.616000] Padding 0xffff88003f9cc408: 00 00 00 00 00 00 00 00 ........
[ 0.616000] Pid: 1, comm: swapper Not tainted 2.6.27-06574-g8c86407 #45103
[ 0.616000] Call Trace:
[ 0.616000] [<ffffffff802ca58c>] print_trailer+0xfc/0x160
[ 0.616000] [<ffffffff802ca758>] check_bytes_and_report+0xb8/0xe0
[ 0.616000] [<ffffffff802ca7ea>] check_object+0x6a/0x270
[ 0.616000] [<ffffffff802cd908>] __slab_free+0x208/0x310
[ 0.616000] [<ffffffff80412ad9>] ? free_cpumask_var+0x9/0x10
[ 0.616000] [<ffffffff802cdac7>] kfree+0xb7/0x140
[ 0.616000] [<ffffffff80412ad9>] ? free_cpumask_var+0x9/0x10
[ 0.616000] [<ffffffff80412ad9>] free_cpumask_var+0x9/0x10
[ 0.616000] [<ffffffff8023b8d5>] __build_sched_domains+0x4a5/0xd30
[ 0.616000] [<ffffffff8026cc5d>] ? trace_hardirqs_on+0xd/0x10
[ 0.616000] [<ffffffff81659afa>] sched_init_smp+0xba/0x2b0
[ 0.616000] [<ffffffff8026cbbf>] ? trace_hardirqs_on_caller+0xcf/0x160
[ 0.616000] [<ffffffff802ca6dd>] ? check_bytes_and_report+0x3d/0xe0
[ 0.616000] [<ffffffff802ca9b8>] ? check_object+0x238/0x270
[ 0.616000] [<ffffffff802caa44>] ? init_object+0x54/0x90
[ 0.616000] [<ffffffff8026cc5d>] ? trace_hardirqs_on+0xd/0x10
[ 0.616000] [<ffffffff8026cbbf>] ? trace_hardirqs_on_caller+0xcf/0x160
[ 0.616000] [<ffffffff8026cc5d>] ? trace_hardirqs_on+0xd/0x10
[ 0.616000] [<ffffffff81652384>] ? check_nmi_watchdog+0x204/0x260
[ 0.616000] [<ffffffff81652384>] ? check_nmi_watchdog+0x204/0x260
[ 0.616000] [<ffffffff8164fb76>] ? native_smp_cpus_done+0x1a6/0x2b0
[ 0.616000] [<ffffffff81644f16>] kernel_init+0x176/0x240
[ 0.616000] [<ffffffff8020c969>] child_rip+0xa/0x11
[ 0.616000] [<ffffffff8020be84>] ? restore_args+0x0/0x30
[ 0.616000] [<ffffffff81644da0>] ? kernel_init+0x0/0x240
[ 0.616000] [<ffffffff8020c95f>] ? child_rip+0x0/0x11
[ 0.616000] FIX kmalloc-8: Restoring 0xffff88003f9cc3c8-0xffff88003f9cc3cf=0xcc
[ 0.616000]
[ 0.616004] =============================================================================
[ 0.620000] BUG kmalloc-8: Redzone overwritten
[ 0.620000] -----------------------------------------------------------------------------
[ 0.620000]
[ 0.620000] INFO: 0xffff88003f9cc378-0xffff88003f9cc37f. First byte 0x0 instead of 0xcc
[ 0.620000] INFO: Slab 0xffffe200017dac80 objects=51 used=50 fp=0xffff88003f9cc4b0 flags=0x200000000000c3
[ 0.620000] INFO: Object 0xffff88003f9cc370 @offset=880 fp=0x0000000000000000
[ 0.620000]
[ 0.620000] Bytes b4 0xffff88003f9cc360: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[ 0.620000] Object 0xffff88003f9cc370: 00 00 00 00 00 00 00 00 ........
[ 0.620000] Redzone 0xffff88003f9cc378: 00 00 00 00 00 00 00 00 ........
[ 0.620000] Padding 0xffff88003f9cc3b8: 00 00 00 00 00 00 00 00 ........
[ 0.620000] Pid: 1, comm: swapper Not tainted 2.6.27-06574-g8c86407 #45103
[ 0.620000] Call Trace:
[ 0.620000] [<ffffffff802ca58c>] print_trailer+0xfc/0x160
[ 0.620000] [<ffffffff802ca758>] check_bytes_and_report+0xb8/0xe0
[ 0.620000] [<ffffffff802ca7ea>] check_object+0x6a/0x270
[ 0.620000] [<ffffffff802cd908>] __slab_free+0x208/0x310
[ 0.620000] [<ffffffff80412ad9>] ? free_cpumask_var+0x9/0x10
[ 0.620000] [<ffffffff802cdac7>] kfree+0xb7/0x140
[ 0.620000] [<ffffffff80412ad9>] ? free_cpumask_var+0x9/0x10
[ 0.620000] [<ffffffff80412ad9>] free_cpumask_var+0x9/0x10
[ 0.620000] [<ffffffff8023b53d>] __build_sched_domains+0x10d/0xd30
[ 0.620000] [<ffffffff8026cc5d>] ? trace_hardirqs_on+0xd/0x10
[ 0.620000] [<ffffffff81659afa>] sched_init_smp+0xba/0x2b0
[ 0.620000] [<ffffffff8026cbbf>] ? trace_hardirqs_on_caller+0xcf/0x160
[ 0.620000] [<ffffffff802ca6dd>] ? check_bytes_and_report+0x3d/0xe0
[ 0.620000] [<ffffffff802ca9b8>] ? check_object+0x238/0x270
[ 0.620000] [<ffffffff802caa44>] ? init_object+0x54/0x90
[ 0.620000] [<ffffffff8026cc5d>] ? trace_hardirqs_on+0xd/0x10
[ 0.620000] [<ffffffff8026cbbf>] ? trace_hardirqs_on_caller+0xcf/0x160
[ 0.620000] [<ffffffff8026cc5d>] ? trace_hardirqs_on+0xd/0x10
[ 0.620000] [<ffffffff81652384>] ? check_nmi_watchdog+0x204/0x260
[ 0.620000] [<ffffffff81652384>] ? check_nmi_watchdog+0x204/0x260
[ 0.620000] [<ffffffff8164fb76>] ? native_smp_cpus_done+0x1a6/0x2b0
[ 0.620000] [<ffffffff81644f16>] kernel_init+0x176/0x240
[ 0.620000] [<ffffffff8020c969>] child_rip+0xa/0x11
[ 0.620000] [<ffffffff8020be84>] ? restore_args+0x0/0x30
[ 0.620000] [<ffffffff81644da0>] ? kernel_init+0x0/0x240
[ 0.620000] [<ffffffff8020c95f>] ? child_rip+0x0/0x11
[ 0.620000] FIX kmalloc-8: Restoring 0xffff88003f9cc378-0xffff88003f9cc37f=0xcc
[ 0.620000]
[ 0.620004] =============================================================================
[ 0.624000] BUG kmalloc-8: Redzone overwritten
[ 0.624000] -----------------------------------------------------------------------------
[ 0.624000]
[ 0.624000] INFO: 0xffff88003f9cc328-0xffff88003f9cc32f. First byte 0x0 instead of 0xcc
[ 0.624000] INFO: Slab 0xffffe200017dac80 objects=51 used=50 fp=0xffff88003f9cc4b0 flags=0x200000000000c3
[ 0.624000] INFO: Object 0xffff88003f9cc320 @offset=800 fp=0x0000000000000000
[ 0.624000]
[ 0.624000] Bytes b4 0xffff88003f9cc310: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[ 0.624000] Object 0xffff88003f9cc320: 00 00 00 00 00 00 00 00 ........
[ 0.624000] Redzone 0xffff88003f9cc328: 00 00 00 00 00 00 00 00 ........
[ 0.624000] Padding 0xffff88003f9cc368: 00 00 00 00 00 00 00 00 ........
[ 0.624000] Pid: 1, comm: swapper Not tainted 2.6.27-06574-g8c86407 #45103
[ 0.624000] Call Trace:
[ 0.624000] [<ffffffff802ca58c>] print_trailer+0xfc/0x160
[ 0.624000] [<ffffffff802ca758>] check_bytes_and_report+0xb8/0xe0
[ 0.624000] [<ffffffff802ca7ea>] check_object+0x6a/0x270
[ 0.624000] [<ffffffff802cd908>] __slab_free+0x208/0x310
[ 0.624000] [<ffffffff80412ad9>] ? free_cpumask_var+0x9/0x10
[ 0.624000] [<ffffffff802cdac7>] kfree+0xb7/0x140
[ 0.624000] [<ffffffff80412ad9>] ? free_cpumask_var+0x9/0x10
[ 0.624000] [<ffffffff80412ad9>] free_cpumask_var+0x9/0x10
[ 0.624000] [<ffffffff8023b51d>] __build_sched_domains+0xed/0xd30
[ 0.624000] [<ffffffff8026cc5d>] ? trace_hardirqs_on+0xd/0x10
[ 0.624000] [<ffffffff81659afa>] sched_init_smp+0xba/0x2b0
[ 0.624000] [<ffffffff8026cbbf>] ? trace_hardirqs_on_caller+0xcf/0x160
[ 0.624000] [<ffffffff802ca6dd>] ? check_bytes_and_report+0x3d/0xe0
[ 0.624000] [<ffffffff802ca9b8>] ? check_object+0x238/0x270
[ 0.624000] [<ffffffff802caa44>] ? init_object+0x54/0x90
[ 0.624000] [<ffffffff8026cc5d>] ? trace_hardirqs_on+0xd/0x10
[ 0.624000] [<ffffffff8026cbbf>] ? trace_hardirqs_on_caller+0xcf/0x160
[ 0.624000] [<ffffffff8026cc5d>] ? trace_hardirqs_on+0xd/0x10
[ 0.624000] [<ffffffff81652384>] ? check_nmi_watchdog+0x204/0x260
[ 0.624000] [<ffffffff81652384>] ? check_nmi_watchdog+0x204/0x260
[ 0.624000] [<ffffffff8164fb76>] ? native_smp_cpus_done+0x1a6/0x2b0
[ 0.624000] [<ffffffff81644f16>] kernel_init+0x176/0x240
[ 0.624000] [<ffffffff8020c969>] child_rip+0xa/0x11
[ 0.624000] [<ffffffff8020be84>] ? restore_args+0x0/0x30
[ 0.624000] [<ffffffff81644da0>] ? kernel_init+0x0/0x240
[ 0.624000] [<ffffffff8020c95f>] ? child_rip+0x0/0x11
[ 0.624000] FIX kmalloc-8: Restoring 0xffff88003f9cc328-0xffff88003f9cc32f=0xcc
[ 0.624000]
[ 0.624004] =============================================================================
[ 0.628000] BUG kmalloc-8: Redzone overwritten
[ 0.628000] -----------------------------------------------------------------------------
[ 0.628000]
[ 0.628000] INFO: 0xffff88003f9cc2d8-0xffff88003f9cc2df. First byte 0x0 instead of 0xcc
[ 0.628000] INFO: Slab 0xffffe200017dac80 objects=51 used=50 fp=0xffff88003f9cc4b0 flags=0x200000000000c3
[ 0.628000] INFO: Object 0xffff88003f9cc2d0 @offset=720 fp=0x0000000000000000
[ 0.628000]
[ 0.628000] Bytes b4 0xffff88003f9cc2c0: 00 00 00 00 00 00 00 00 5a 5a 5a 5a 5a 5a 5a 5a ........ZZZZZZZZ
[ 0.628000] Object 0xffff88003f9cc2d0: 03 00 00 00 00 00 00 00 ........
[ 0.628000] Redzone 0xffff88003f9cc2d8: 00 00 00 00 00 00 00 00 ........
[ 0.628000] Padding 0xffff88003f9cc318: 00 00 00 00 00 00 00 00 ........
[ 0.628000] Pid: 1, comm: swapper Not tainted 2.6.27-06574-g8c86407 #45103
[ 0.628000] Call Trace:
[ 0.628000] [<ffffffff802ca58c>] print_trailer+0xfc/0x160
[ 0.628000] [<ffffffff802ca758>] check_bytes_and_report+0xb8/0xe0
[ 0.628000] [<ffffffff802ca7ea>] check_object+0x6a/0x270
[ 0.628000] [<ffffffff802cd908>] __slab_free+0x208/0x310
[ 0.628000] [<ffffffff80412ad9>] ? free_cpumask_var+0x9/0x10
[ 0.628000] [<ffffffff802cdac7>] kfree+0xb7/0x140
[ 0.628000] [<ffffffff80412ad9>] ? free_cpumask_var+0x9/0x10
[ 0.628000] [<ffffffff80412ad9>] free_cpumask_var+0x9/0x10
[ 0.628000] [<ffffffff8023b4fd>] __build_sched_domains+0xcd/0xd30
[ 0.628000] [<ffffffff8026cc5d>] ? trace_hardirqs_on+0xd/0x10
[ 0.628000] [<ffffffff81659afa>] sched_init_smp+0xba/0x2b0
[ 0.628000] [<ffffffff8026cbbf>] ? trace_hardirqs_on_caller+0xcf/0x160
[ 0.628000] [<ffffffff802ca6dd>] ? check_bytes_and_report+0x3d/0xe0
[ 0.628000] [<ffffffff802ca9b8>] ? check_object+0x238/0x270
[ 0.628000] [<ffffffff802caa44>] ? init_object+0x54/0x90
[ 0.628000] [<ffffffff8026cc5d>] ? trace_hardirqs_on+0xd/0x10
[ 0.628000] [<ffffffff8026cbbf>] ? trace_hardirqs_on_caller+0xcf/0x160
[ 0.628000] [<ffffffff8026cc5d>] ? trace_hardirqs_on+0xd/0x10
[ 0.628000] [<ffffffff81652384>] ? check_nmi_watchdog+0x204/0x260
[ 0.628000] [<ffffffff81652384>] ? check_nmi_watchdog+0x204/0x260
[ 0.628000] [<ffffffff8164fb76>] ? native_smp_cpus_done+0x1a6/0x2b0
[ 0.628000] [<ffffffff81644f16>] kernel_init+0x176/0x240
[ 0.628000] [<ffffffff8020c969>] child_rip+0xa/0x11
[ 0.628000] [<ffffffff8020be84>] ? restore_args+0x0/0x30
[ 0.628000] [<ffffffff81644da0>] ? kernel_init+0x0/0x240
[ 0.628000] [<ffffffff8020c95f>] ? child_rip+0x0/0x11
[ 0.628000] FIX kmalloc-8: Restoring 0xffff88003f9cc2d8-0xffff88003f9cc2df=0xcc
[ 0.628000]
[ 0.628025] =============================================================================
[ 0.632000] BUG kmalloc-8: Redzone overwritten
[ 0.632000] -----------------------------------------------------------------------------
[ 0.632000]
[ 0.632000] INFO: 0xffff88003f9cc4b8-0xffff88003f9cc4bf. First byte 0x0 instead of 0xbb
[ 0.632000] INFO: Slab 0xffffe200017dac80 objects=51 used=50 fp=0xffff88003f9cc4b0 flags=0x200000000000c3
[ 0.632000] INFO: Object 0xffff88003f9cc4b0 @offset=1200 fp=0x0000000000000000
[ 0.632000]
[ 0.632000] Bytes b4 0xffff88003f9cc4a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[ 0.632000] Object 0xffff88003f9cc4b0: 00 00 00 00 00 00 00 00 ........
[ 0.632000] Redzone 0xffff88003f9cc4b8: 00 00 00 00 00 00 00 00 ........
[ 0.632000] Padding 0xffff88003f9cc4f8: 00 00 00 00 00 00 00 00 ........
[ 0.632000] Pid: 1, comm: swapper Not tainted 2.6.27-06574-g8c86407 #45103
[ 0.632000] Call Trace:
[ 0.632000] [<ffffffff802ca58c>] print_trailer+0xfc/0x160
[ 0.632000] [<ffffffff802ca758>] check_bytes_and_report+0xb8/0xe0
[ 0.632000] [<ffffffff802ca7ea>] check_object+0x6a/0x270
[ 0.632000] [<ffffffff802cd2bc>] __slab_alloc+0x37c/0x440
[ 0.632000] [<ffffffff8023985e>] ? register_sched_domain_sysctl+0xce/0x470
[ 0.632000] [<ffffffff8026ca2a>] ? mark_held_locks+0x8a/0xb0
[ 0.632000] [<ffffffff8023923a>] ? sd_alloc_ctl_entry+0x2a/0x40
[ 0.632000] [<ffffffff8023985e>] ? register_sched_domain_sysctl+0xce/0x470
[ 0.632000] [<ffffffff802ce7e6>] __kmalloc_track_caller+0x106/0x110
[ 0.632000] [<ffffffff802b1cc5>] kstrdup+0x45/0x120
[ 0.632000] [<ffffffff8023985e>] register_sched_domain_sysctl+0xce/0x470
[ 0.632000] [<ffffffff81659aff>] sched_init_smp+0xbf/0x2b0
[ 0.632000] [<ffffffff8026cbbf>] ? trace_hardirqs_on_caller+0xcf/0x160
[ 0.632000] [<ffffffff802ca6dd>] ? check_bytes_and_report+0x3d/0xe0
[ 0.632000] [<ffffffff802ca9b8>] ? check_object+0x238/0x270
[ 0.632000] [<ffffffff802caa44>] ? init_object+0x54/0x90
[ 0.632000] [<ffffffff8026cc5d>] ? trace_hardirqs_on+0xd/0x10
[ 0.632000] [<ffffffff8026cbbf>] ? trace_hardirqs_on_caller+0xcf/0x160
[ 0.632000] [<ffffffff8026cc5d>] ? trace_hardirqs_on+0xd/0x10
[ 0.632000] [<ffffffff81652384>] ? check_nmi_watchdog+0x204/0x260
[ 0.632000] [<ffffffff81652384>] ? check_nmi_watchdog+0x204/0x260
[ 0.632000] [<ffffffff8164fb76>] ? native_smp_cpus_done+0x1a6/0x2b0
[ 0.632000] [<ffffffff81644f16>] kernel_init+0x176/0x240
[ 0.632000] [<ffffffff8020c969>] child_rip+0xa/0x11
[ 0.632000] [<ffffffff8020be84>] ? restore_args+0x0/0x30
[ 0.632000] [<ffffffff81644da0>] ? kernel_init+0x0/0x240
[ 0.632000] [<ffffffff8020c95f>] ? child_rip+0x0/0x11
[ 0.632000] FIX kmalloc-8: Restoring 0xffff88003f9cc4b8-0xffff88003f9cc4bf=0xbb
[ 0.632000]
[ 0.632000] FIX kmalloc-8: Marking all objects used
[ 0.638221] calling init_cpufreq_transition_notifier_list+0x0/0x20 @ 1
[ 0.640021] initcall init_cpufreq_transition_notifier_list+0x0/0x20 returned 0 after 0 usecs
[ 0.644005] calling net_ns_init+0x0/0x180 @ 1
[ 0.648003] net_namespace: 1416 bytes
[ 0.652037] initcall net_ns_init+0x0/0x180 returned 0 after 3906 usecs
[ 0.656006] calling cpufreq_tsc+0x0/0x40 @ 1
[ 0.660005] initcall cpufreq_tsc+0x0/0x40 returned 0 after 0 usecs
[ 0.664006] calling init_smp_flush+0x0/0x80 @ 1
[ 0.668005] initcall init_smp_flush+0x0/0x80 returned 0 after 0 usecs
[ 0.672011] calling sysctl_init+0x0/0x40 @ 1
[ 0.676254] initcall sysctl_init+0x0/0x40 returned 0 after 0 usecs
[ 0.680005] calling ksysfs_init+0x0/0xc0 @ 1
[ 0.684215] initcall ksysfs_init+0x0/0xc0 returned 0 after 0 usecs
[ 0.688007] calling init_jiffies_clocksource+0x0/0x20 @ 1
[ 0.692045] initcall init_jiffies_clocksource+0x0/0x20 returned 0 after 0 usecs
[ 0.696005] calling filelock_init+0x0/0x30 @ 1
[ 0.700018] initcall filelock_init+0x0/0x30 returned 0 after 0 usecs
[ 0.704004] calling init_misc_binfmt+0x0/0x50 @ 1
[ 0.708020] initcall init_misc_binfmt+0x0/0x50 returned 0 after 0 usecs
[ 0.712004] calling init_script_binfmt+0x0/0x20 @ 1
[ 0.716005] initcall init_script_binfmt+0x0/0x20 returned 0 after 0 usecs
[ 0.720004] calling init_elf_binfmt+0x0/0x20 @ 1
[ 0.724005] initcall init_elf_binfmt+0x0/0x20 returned 0 after 0 usecs
[ 0.728004] calling init_compat_elf_binfmt+0x0/0x20 @ 1
[ 0.732005] initcall init_compat_elf_binfmt+0x0/0x20 returned 0 after 0 usecs
[ 0.736006] calling debugfs_init+0x0/0x60 @ 1
[ 0.740013] initcall debugfs_init+0x0/0x60 returned 0 after 0 usecs
[ 0.744004] calling securityfs_init+0x0/0x60 @ 1
[ 0.748012] initcall securityfs_init+0x0/0x60 returned 0 after 0 usecs
[ 0.752005] calling random32_init+0x0/0x100 @ 1
[ 0.756005] initcall random32_init+0x0/0x100 returned 0 after 0 usecs
[ 0.760004] calling cpufreq_core_init+0x0/0x90 @ 1
[ 0.764005] initcall cpufreq_core_init+0x0/0x90 returned 0 after 0 usecs
[ 0.768011] calling cpuidle_init+0x0/0x50 @ 1
[ 0.772017] initcall cpuidle_init+0x0/0x50 returned 0 after 0 usecs
[ 0.776004] calling sock_init+0x0/0x60 @ 1
[ 0.780202] initcall sock_init+0x0/0x60 returned 0 after 0 usecs
[ 0.784005] calling netpoll_init+0x0/0x50 @ 1
[ 0.788004] initcall netpoll_init+0x0/0x50 returned 0 after 0 usecs
[ 0.792004] calling netlink_proto_init+0x0/0x180 @ 1
[ 0.796070] NET: Registered protocol family 16
[ 0.800087] initcall netlink_proto_init+0x0/0x180 returned 0 after 3906 usecs
[ 0.804005] calling bdi_class_init+0x0/0x50 @ 1
[ 0.808397] initcall bdi_class_init+0x0/0x50 returned 0 after 0 usecs
[ 0.812007] calling kobject_uevent_init+0x0/0x50 @ 1
[ 0.816061] initcall kobject_uevent_init+0x0/0x50 returned 0 after 0 usecs
[ 0.820005] calling pcibus_class_init+0x0/0x20 @ 1
[ 0.824120] initcall pcibus_class_init+0x0/0x20 returned 0 after 0 usecs
[ 0.828025] calling pci_driver_init+0x0/0x20 @ 1
[ 0.836762] initcall pci_driver_init+0x0/0x20 returned 0 after 0 usecs
[ 0.840006] calling lcd_class_init+0x0/0x50 @ 1
[ 0.844105] initcall lcd_class_init+0x0/0x50 returned 0 after 0 usecs
[ 0.852007] calling backlight_class_init+0x0/0x50 @ 1
[ 0.859555] initcall backlight_class_init+0x0/0x50 returned 0 after 0 usecs
[ 0.860007] calling tty_class_init+0x0/0x40 @ 1
[ 0.864107] initcall tty_class_init+0x0/0x40 returned 0 after 0 usecs
[ 0.872006] calling vtconsole_class_init+0x0/0xf0 @ 1
[ 0.879054] initcall vtconsole_class_init+0x0/0xf0 returned 0 after 0 usecs
[ 0.880007] calling register_node_type+0x0/0x70 @ 1
[ 0.884192] initcall register_node_type+0x0/0x70 returned 0 after 0 usecs
[ 0.888006] calling spi_init+0x0/0x90 @ 1
[ 0.892131] initcall spi_init+0x0/0x90 returned 0 after 0 usecs
[ 0.896007] calling amd_postcore_init+0x0/0x8b0 @ 1
[ 0.904025] node 0 link 0: io port [1000, fffff]
[ 0.908005] TOM: 0000000040000000 aka 1024M
[ 0.912004] node 0 link 0: mmio [e0000000, efffffff]
[ 0.916173] node 0 link 0: mmio [feb00000, fec0ffff]
[ 0.920173] node 0 link 0: mmio [a0000, bffff]
[ 0.924173] node 0 link 0: mmio [40000000, fed3ffff]
[ 0.932173] bus: [00,ff] on node 0 link 0
[ 0.936004] bus: 00 index 0 io port: [0, ffff]
[ 0.940004] bus: 00 index 1 mmio: [40000000, fcffffffff]
[ 0.944004] bus: 00 index 2 mmio: [feb00000, fec0ffff]
[ 0.948004] bus: 00 index 3 mmio: [a0000, bffff]
[ 0.956005] initcall amd_postcore_init+0x0/0x8b0 returned 0 after 50781 usecs
[ 0.960007] calling arch_kdebugfs_init+0x0/0x1e0 @ 1
[ 0.968085] initcall arch_kdebugfs_init+0x0/0x1e0 returned 0 after 0 usecs
[ 0.972006] calling mtrr_if_init+0x0/0x80 @ 1
[ 0.976024] initcall mtrr_if_init+0x0/0x80 returned 0 after 0 usecs
[ 0.984005] calling pci_arch_init+0x0/0x50 @ 1
[ 0.988455] PCI: Using configuration type 1 for base access
[ 0.996005] initcall pci_arch_init+0x0/0x50 returned 0 after 7812 usecs
[ 1.000005] calling topology_init+0x0/0x90 @ 1
[ 1.007938] initcall topology_init+0x0/0x90 returned 0 after 0 usecs
[ 1.008008] calling mtrr_init_finialize+0x0/0x50 @ 1
[ 1.012005] initcall mtrr_init_finialize+0x0/0x50 returned 0 after 0 usecs
[ 1.016005] calling param_sysfs_init+0x0/0x240 @ 1
[ 1.042760] initcall param_sysfs_init+0x0/0x240 returned 0 after 19531 usecs
[ 1.048414] calling readahead_init+0x0/0x40 @ 1
[ 1.055825] initcall readahead_init+0x0/0x40 returned 0 after 0 usecs
[ 1.056008] calling init_bio+0x0/0x100 @ 1
[ 1.060628] initcall init_bio+0x0/0x100 returned 0 after 0 usecs
[ 1.064006] calling integrity_init+0x0/0x40 @ 1
[ 1.068031] initcall integrity_init+0x0/0x40 returned 0 after 0 usecs
[ 1.072006] calling cryptomgr_init+0x0/0x40 @ 1
[ 1.080028] initcall cryptomgr_init+0x0/0x40 returned 0 after 0 usecs
[ 1.084005] calling blk_settings_init+0x0/0x30 @ 1
[ 1.088005] initcall blk_settings_init+0x0/0x30 returned 0 after 0 usecs
[ 1.096004] calling blk_ioc_init+0x0/0x30 @ 1
[ 1.100023] initcall blk_ioc_init+0x0/0x30 returned 0 after 0 usecs
[ 1.108005] calling blk_softirq_init+0x0/0x80 @ 1
[ 1.112007] initcall blk_softirq_init+0x0/0x80 returned 0 after 0 usecs
[ 1.120004] calling genhd_device_init+0x0/0x60 @ 1
[ 1.125496] initcall genhd_device_init+0x0/0x60 returned 0 after 0 usecs
[ 1.128006] calling blk_dev_integrity_init+0x0/0x30 @ 1
[ 1.132014] initcall blk_dev_integrity_init+0x0/0x30 returned 0 after 0 usecs
[ 1.136007] calling pci_slot_init+0x0/0x50 @ 1
[ 1.140021] initcall pci_slot_init+0x0/0x50 returned 0 after 0 usecs
[ 1.144004] calling misc_init+0x0/0xb0 @ 1
[ 1.148264] initcall misc_init+0x0/0xb0 returned 0 after 0 usecs
[ 1.152008] calling cn_init+0x0/0x100 @ 1
[ 1.156085] initcall cn_init+0x0/0x100 returned 0 after 0 usecs
[ 1.160027] calling phy_init+0x0/0x40 @ 1
[ 1.168239] initcall phy_init+0x0/0x40 returned 0 after 3906 usecs
[ 1.172005] calling init_scsi+0x0/0xb0 @ 1
[ 1.179477] SCSI subsystem initialized
[ 1.180028] initcall init_scsi+0x0/0xb0 returned 0 after 3906 usecs
[ 1.184005] calling ata_init+0x0/0x3c0 @ 1
[ 1.188026] libata version 3.00 loaded.
[ 1.192006] initcall ata_init+0x0/0x3c0 returned 0 after 3906 usecs
[ 1.196005] calling usb_init+0x0/0xf0 @ 1
[ 1.204319] usbcore: registered new interface driver usbfs
[ 1.210092] usbcore: registered new interface driver hub
[ 1.212283] usbcore: registered new device driver usb
[ 1.220006] initcall usb_init+0x0/0xf0 returned 0 after 19531 usecs
[ 1.224005] calling serio_init+0x0/0xb0 @ 1
[ 1.231256] initcall serio_init+0x0/0xb0 returned 0 after 0 usecs
[ 1.232064] calling gameport_init+0x0/0xb0 @ 1
[ 1.236293] initcall gameport_init+0x0/0xb0 returned 0 after 0 usecs
[ 1.240007] calling input_init+0x0/0x130 @ 1
[ 1.244132] initcall input_init+0x0/0x130 returned 0 after 0 usecs
[ 1.248034] calling hwmon_init+0x0/0x50 @ 1
[ 1.255296] initcall hwmon_init+0x0/0x50 returned 0 after 0 usecs
[ 1.256007] calling md_init+0x0/0xe0 @ 1
[ 1.260065] initcall md_init+0x0/0xe0 returned 0 after 0 usecs
[ 1.264004] calling pci_subsys_init+0x0/0x130 @ 1
[ 1.268003] PCI: Probing PCI hardware
[ 1.272033] PCI: Probing PCI hardware (bus 00)
[ 1.280358] HPET not enabled in BIOS. You might try hpet=force boot option
[ 1.284075] pci 0000:00:01.1: reg 10 io port: [0xdc00-0xdc1f]
[ 1.288027] pci 0000:00:01.1: reg 20 io port: [0x4c00-0x4c3f]
[ 1.292010] pci 0000:00:01.1: reg 24 io port: [0x4c40-0x4c7f]
[ 1.296020] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 1.300007] pci 0000:00:01.1: PME# disabled
[ 1.304068] pci 0000:00:02.0: reg 10 32bit mmio: [0xda102000-0xda102fff]
[ 1.308049] pci 0000:00:02.0: supports D1 D2
[ 1.312004] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.316006] pci 0000:00:02.0: PME# disabled
[ 1.320067] pci 0000:00:02.1: reg 10 32bit mmio: [0xfeb00000-0xfeb000ff]
[ 1.324052] pci 0000:00:02.1: supports D1 D2
[ 1.328004] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.332007] pci 0000:00:02.1: PME# disabled
[ 1.336094] pci 0000:00:04.0: reg 10 io port: [0xd400-0xd4ff]
[ 1.340010] pci 0000:00:04.0: reg 14 io port: [0xd800-0xd8ff]
[ 1.344010] pci 0000:00:04.0: reg 18 32bit mmio: [0xda101000-0xda101fff]
[ 1.348037] pci 0000:00:04.0: supports D1 D2
[ 1.352080] pci 0000:00:06.0: reg 20 io port: [0xf000-0xf00f]
[ 1.356129] pci 0000:00:0a.0: reg 10 32bit mmio: [0xda100000-0xda100fff]
[ 1.360010] pci 0000:00:0a.0: reg 14 io port: [0xd000-0xd007]
[ 1.364042] pci 0000:00:0a.0: supports D1 D2
[ 1.368004] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.372006] pci 0000:00:0a.0: PME# disabled
[ 1.376081] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.380006] pci 0000:00:0b.0: PME# disabled
[ 1.384104] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.388006] pci 0000:00:0c.0: PME# disabled
[ 1.392103] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.396006] pci 0000:00:0d.0: PME# disabled
[ 1.400126] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.404006] pci 0000:00:0e.0: PME# disabled
[ 1.412425] pci 0000:05:07.0: reg 10 io port: [0xc000-0xc0ff]
[ 1.416011] pci 0000:05:07.0: reg 14 32bit mmio: [0xda000000-0xda0000ff]
[ 1.420049] pci 0000:05:07.0: supports D1 D2
[ 1.424004] pci 0000:05:07.0: PME# supported from D1 D2 D3hot
[ 1.428007] pci 0000:05:07.0: PME# disabled
[ 1.432056] pci 0000:00:09.0: transparent bridge
[ 1.436007] pci 0000:00:09.0: bridge io port: [0xc000-0xcfff]
[ 1.440007] pci 0000:00:09.0: bridge 32bit mmio: [0xda000000-0xda0fffff]
[ 1.448149] pci 0000:01:00.0: reg 10 32bit mmio: [0xd0000000-0xd7ffffff]
[ 1.452011] pci 0000:01:00.0: reg 14 io port: [0xb000-0xb0ff]
[ 1.456011] pci 0000:01:00.0: reg 18 32bit mmio: [0xd9000000-0xd900ffff]
[ 1.460030] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 1.464015] pci 0000:01:00.0: supports D1 D2
[ 1.468087] pci 0000:01:00.1: reg 10 32bit mmio: [0xd9010000-0xd901ffff]
[ 1.472054] pci 0000:01:00.1: supports D1 D2
[ 1.476087] pci 0000:00:0e.0: bridge io port: [0xb000-0xbfff]
[ 1.480006] pci 0000:00:0e.0: bridge 32bit mmio: [0xd8000000-0xd9ffffff]
[ 1.484009] pci 0000:00:0e.0: bridge 64bit mmio pref: [0xd0000000-0xd7ffffff]
[ 1.494439] pci 0000:00:00.0: default IRQ router [10de:005e]
[ 1.500121] pci 0000:00:04.0: PCI->APIC IRQ transform: INT A -> IRQ 3
[ 1.504024] pci 0000:00:0a.0: PCI->APIC IRQ transform: INT A -> IRQ 11
[ 1.508063] pci 0000:05:07.0: PCI->APIC IRQ transform: INT A -> IRQ 11
[ 1.512011] pci 0000:01:00.0: PCI->APIC IRQ transform: INT A -> IRQ 5
[ 1.516326] initcall pci_subsys_init+0x0/0x130 returned 0 after 242187 usecs
[ 1.520005] calling proto_init+0x0/0x30 @ 1
[ 1.524015] initcall proto_init+0x0/0x30 returned 0 after 0 usecs
[ 1.528005] calling net_dev_init+0x0/0x180 @ 1
[ 1.536141] initcall net_dev_init+0x0/0x180 returned 0 after 3906 usecs
[ 1.540005] calling neigh_init+0x0/0x80 @ 1
[ 1.544005] initcall neigh_init+0x0/0x80 returned 0 after 0 usecs
[ 1.548004] calling fib_rules_init+0x0/0xb0 @ 1
[ 1.552007] initcall fib_rules_init+0x0/0xb0 returned 0 after 0 usecs
[ 1.556005] calling pktsched_init+0x0/0xd0 @ 1
[ 1.560036] initcall pktsched_init+0x0/0xd0 returned 0 after 0 usecs
[ 1.564005] calling tc_filter_init+0x0/0x50 @ 1
[ 1.568005] initcall tc_filter_init+0x0/0x50 returned 0 after 0 usecs
[ 1.572004] calling genl_init+0x0/0xe0 @ 1
[ 1.592051] initcall genl_init+0x0/0xe0 returned 0 after 15625 usecs
[ 1.596005] calling cipso_v4_init+0x0/0x90 @ 1
[ 1.600026] initcall cipso_v4_init+0x0/0x90 returned 0 after 0 usecs
[ 1.604005] calling atm_init+0x0/0xd0 @ 1
[ 1.608007] NET: Registered protocol family 8
[ 1.612004] NET: Registered protocol family 20
[ 1.616141] initcall atm_init+0x0/0xd0 returned 0 after 7812 usecs
[ 1.624008] calling wireless_nlevent_init+0x0/0x50 @ 1
[ 1.628005] initcall wireless_nlevent_init+0x0/0x50 returned 0 after 0 usecs
[ 1.636005] calling netlbl_init+0x0/0x90 @ 1
[ 1.640003] NetLabel: Initializing
[ 1.643376] NetLabel: domain hash size = 128
[ 1.648003] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.652204] NetLabel: unlabeled traffic allowed by default
[ 1.656006] initcall netlbl_init+0x0/0x90 returned 0 after 15625 usecs
[ 1.664005] calling sysctl_init+0x0/0x4c @ 1
[ 1.668009] initcall sysctl_init+0x0/0x4c returned 0 after 0 usecs
[ 1.676006] calling pci_iommu_init+0x0/0x20 @ 1
[ 1.681435] initcall pci_iommu_init+0x0/0x20 returned 0 after 0 usecs
[ 1.684007] calling print_all_ICs+0x0/0x500 @ 1
[ 1.688004]
[ 1.688004] printing PIC contents
[ 1.692006] ... PIC IMR: fffa
[ 1.695031] ... PIC IRR: 0001
[ 1.692006] Clocksource tsc unstable (delta = 120298514 ns)
[ 1.696003] ... PIC ISR: 0001
[ 1.699022] ... PIC ELCR: 0828
[ 1.700005]
[ 1.700005] printing local APIC contents on CPU#0/0:
[ 1.704000] ... APIC ID: 00000000 (0)
[ 1.704000] ... APIC VERSION: 00040010
[ 1.704000] ... APIC TASKPRI: 00000000 (00)
[ 1.704000] ... APIC ARBPRI: 000000e0 (e0)
[ 1.704000] ... APIC PROCPRI: 00000000
[ 1.704000] ... APIC LDR: 01000000
[ 1.704000] ... APIC DFR: ffffffff
[ 1.704000] ... APIC SPIV: 000001ff
[ 1.704000] ... APIC ISR field:
[ 1.704000] 0123456789abcdef0123456789abcdef
[ 1.704000] 00000000000000000000000000000000
[ 1.704000] 00000000000000000000000000000000
[ 1.704000] 00000000000000000000000000000000
[ 1.704000] 00000000000000000000000000000000
[ 1.704000] 00000000000000000000000000000000
[ 1.704000] 00000000000000000000000000000000
[ 1.704000] 00000000000000000000000000000000
[ 1.704000] 00000000000000000000000000000000
[ 1.704000] ... APIC TMR field:
[ 1.704000] 0123456789abcdef0123456789abcdef
[ 1.704000] 00000000000000000000000000000000
[ 1.704000] 00000000000000000000000000000000
[ 1.704000] 00000000000000000000000000000000
[ 1.704000] 00000000000000000000000000000000
[ 1.704000] 00000000000000000000000000000000
[ 1.704000] 00000000000000000000000000000000
[ 1.704000] 00000000000000000000000000000000
[ 1.704000] 00000000000000000000000000000000
[ 1.704000] ... APIC IRR field:
[ 1.704000] 0123456789abcdef0123456789abcdef
[ 1.704000] 00000000000000000000000000000000
[ 1.704000] 00000000000000000000000000000000
[ 1.704000] 00000000000000000000000000000000
[ 1.704000] 00000000000000000000000000000000
[ 1.704000] 00000000000000000000000000000000
[ 1.704000] 00000000000000000000000000000000
[ 1.704000] 00000000000000000000000000000000
[ 1.704000] 00000000000000010000000000000000
[ 1.704000] ... APIC ESR: 00000000
[ 1.704000] ... APIC ICR: 000008fb
[ 1.704000] ... APIC ICR2: 02000000
[ 1.704000] ... APIC LVTT: 000200ef
[ 1.704000] ... APIC LVTPC: 00000400
[ 1.704000] ... APIC LVT0: 00010700
[ 1.704000] ... APIC LVT1: 00000400
[ 1.704000] ... APIC LVTERR: 000000fe
[ 1.704000] ... APIC TMICT: 0000c454
[ 1.704000] ... APIC TMCCT: 00003143
[ 1.704000] ... APIC TDCR: 00000003
[ 1.704000]
[ 1.703997]
[ 1.703997] printing local APIC contents on CPU#1/1:
[ 1.704000] ... APIC ID: 01000000 (1)
[ 1.704000] ... APIC VERSION: 00040010
[ 1.704000] ... APIC TASKPRI: 00000000 (00)
[ 1.704000] ... APIC ARBPRI: 000000e0 (e0)
[ 1.704000] ... APIC PROCPRI: 00000000
[ 1.704000] ... APIC LDR: 02000000
[ 1.704000] ... APIC DFR: ffffffff
[ 1.704000] ... APIC SPIV: 000001ff
[ 1.704000] ... APIC ISR field:
[ 1.704000] 0123456789abcdef0123456789abcdef
[ 1.704000] 00000000000000000000000000000000
[ 1.704000] 00000000000000000000000000000000
[ 1.704000] 00000000000000000000000000000000
[ 1.704000] 00000000000000000000000000000000
[ 1.704000] 00000000000000000000000000000000
[ 1.704000] 00000000000000000000000000000000
[ 1.704000] 00000000000000000000000000000000
[ 1.704000] 00000000000000000000000000000000
[ 1.704000] ... APIC TMR field:
[ 1.704000] 0123456789abcdef0123456789abcdef
[ 1.704000] 00000000000000000000000000000000
[ 1.704000] 00000000000000000000000000000000
[ 1.704000] 00000000000000000000000000000000
[ 1.704000] 00000000000000000000000000000000
[ 1.704000] 00000000000000000000000000000000
[ 1.704000] 00000000000000000000000000000000
[ 1.704000] 00000000000000000000000000000000
[ 1.704000] 00000000000000000000000000000000
[ 1.704000] ... APIC IRR field:
[ 1.704000] 0123456789abcdef0123456789abcdef
[ 1.704000] 00000000000000000000000000000000
[ 1.704000] 00000000000000000000000000000000
[ 1.704000] 00000000000000000000000000000000
[ 1.704000] 00000000000000000000000000000000
[ 1.704000] 00000000000000000000000000000000
[ 1.704000] 00000000000000000000000000000000
[ 1.704000] 00000000000000000000000000000000
[ 1.704000] 00000000000000010000000000000000
[ 1.704000] ... APIC ESR: 00000000
[ 1.704000] ... APIC ICR: 00000000
[ 1.704000] ... APIC ICR2: 00000000
[ 1.704000] ... APIC LVTT: 000200ef
[ 1.704000] ... APIC LVTPC: 00000400
[ 1.704000] ... APIC LVT0: 00010700
[ 1.704000] ... APIC LVT1: 00010400
[ 1.704000] ... APIC LVTERR: 000000fe
[ 1.704000] ... APIC TMICT: 0000c454
[ 1.704000] ... APIC TMCCT: 00003865
[ 1.704000] ... APIC TDCR: 00000003
[ 1.704000]
[ 1.907763] number of MP IRQ sources: 17.
[ 1.908004] number of IO-APIC #2 registers: 24.
[ 1.912004] testing the IO APIC.......................
[ 1.916007]
[ 1.917469] IO APIC #2......
[ 1.920004] .... register #00: 00000000
[ 1.924004] ....... : physical APIC id: 00
[ 1.928004] ....... : Delivery Type: 0
[ 1.932004] ....... : LTS : 0
[ 1.936004] .... register #01: 00170011
[ 1.940004] ....... : max redirection entries: 0017
[ 1.944004] ....... : PRQ implemented: 0
[ 1.948004] ....... : IO APIC version: 0011
[ 1.952004] .... register #02: 00000000
[ 1.956004] ....... : arbitration: 00
[ 1.960004] .... IRQ redirection table:
[ 1.964004] NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect:
[ 1.968006] 00 003 0 0 0 0 0 1 1 30
[ 1.972006] 01 003 0 0 0 0 0 1 1 31
[ 1.979205] 02 000 1 0 0 0 0 0 0 00
[ 1.984006] 03 003 1 1 0 1 0 1 1 33
[ 1.988006] 04 003 0 0 0 0 0 1 1 34
[ 1.992006] 05 003 1 1 0 1 0 1 1 35
[ 2.000012] 06 003 0 0 0 0 0 1 1 36
[ 2.004006] 07 003 1 0 0 0 0 1 1 37
[ 2.008006] 08 003 0 0 0 0 0 1 1 38
[ 2.015204] 09 003 0 0 0 0 0 1 1 39
[ 2.020006] 0a 003 0 0 0 0 0 1 1 3A
[ 2.024006] 0b 003 1 1 0 1 0 1 1 3B
[ 2.031204] 0c 003 0 0 0 0 0 1 1 3C
[ 2.036006] 0d 003 0 0 0 0 0 1 1 3D
[ 2.040006] 0e 003 0 0 0 0 0 1 1 3E
[ 2.044006] 0f 003 0 0 0 0 0 1 1 3F
[ 2.052005] 10 000 1 0 0 0 0 0 0 00
[ 2.056006] 11 000 1 0 0 0 0 0 0 00
[ 2.060006] 12 000 1 0 0 0 0 0 0 00
[ 2.067204] 13 000 1 0 0 0 0 0 0 00
[ 2.072006] 14 000 1 0 0 0 0 0 0 00
[ 2.076006] 15 000 1 0 0 0 0 0 0 00
[ 2.083204] 16 000 1 0 0 0 0 0 0 00
[ 2.088006] 17 000 1 0 0 0 0 0 0 00
[ 2.092003] IRQ to pin mappings:
[ 2.096004] IRQ0 -> 0:0
[ 2.098423] IRQ1 -> 0:1
[ 2.100690] IRQ3 -> 0:3
[ 2.104171] IRQ4 -> 0:4
[ 2.106596] IRQ5 -> 0:5
[ 2.108690] IRQ6 -> 0:6
[ 2.111115] IRQ7 -> 0:7
[ 2.112690] IRQ8 -> 0:8
[ 2.116171] IRQ9 -> 0:9
[ 2.118596] IRQ10 -> 0:10
[ 2.120776] IRQ11 -> 0:11
[ 2.123374] IRQ12 -> 0:12
[ 2.124776] IRQ13 -> 0:13
[ 2.128777] IRQ14 -> 0:14
[ 2.131375] IRQ15 -> 0:15
[ 2.132778] .................................... done.
[ 2.136005] initcall print_all_ICs+0x0/0x500 returned 0 after 437500 usecs
[ 2.140005] calling hpet_late_init+0x0/0xa0 @ 1
[ 2.144005] initcall hpet_late_init+0x0/0xa0 returned -19 after 0 usecs
[ 2.148005] calling init_kmmio+0x0/0x40 @ 1
[ 2.152008] initcall init_kmmio+0x0/0x40 returned 0 after 0 usecs
[ 2.156005] calling clocksource_done_booting+0x0/0x20 @ 1
[ 2.160005] initcall clocksource_done_booting+0x0/0x20 returned 0 after 0 usecs
[ 2.164005] calling ftrace_init_debugfs+0x0/0x130 @ 1
[ 2.168119] initcall ftrace_init_debugfs+0x0/0x130 returned 0 after 0 usecs
[ 2.172005] calling tracer_init_debugfs+0x0/0x350 @ 1
[ 2.176246] initcall tracer_init_debugfs+0x0/0x350 returned 0 after 0 usecs
[ 2.180006] calling init_pipe_fs+0x0/0x60 @ 1
[ 2.184128] initcall init_pipe_fs+0x0/0x60 returned 0 after 0 usecs
[ 2.188005] calling init_mnt_writers+0x0/0x90 @ 1
[ 2.192006] initcall init_mnt_writers+0x0/0x90 returned 0 after 0 usecs
[ 2.196005] calling eventpoll_init+0x0/0xa0 @ 1
[ 2.200035] initcall eventpoll_init+0x0/0xa0 returned 0 after 0 usecs
[ 2.204005] calling anon_inode_init+0x0/0x130 @ 1
[ 2.208151] initcall anon_inode_init+0x0/0x130 returned 0 after 0 usecs
[ 2.212006] calling chr_dev_init+0x0/0xe0 @ 1
[ 2.216148] initcall chr_dev_init+0x0/0xe0 returned 0 after 0 usecs
[ 2.224008] calling firmware_class_init+0x0/0x90 @ 1
[ 2.230819] initcall firmware_class_init+0x0/0x90 returned 0 after 0 usecs
[ 2.236006] calling loopback_init+0x0/0x20 @ 1
[ 2.242955] initcall loopback_init+0x0/0x20 returned 0 after 0 usecs
[ 2.244007] calling cpufreq_gov_performance_init+0x0/0x20 @ 1
[ 2.248040] initcall cpufreq_gov_performance_init+0x0/0x20 returned 0 after 0 usecs
[ 2.252004] calling pcibios_assign_resources+0x0/0x90 @ 1
[ 2.256148] pci 0000:00:09.0: PCI bridge, secondary bus 0000:05
[ 2.260006] pci 0000:00:09.0: IO window: 0xc000-0xcfff
[ 2.264009] pci 0000:00:09.0: MEM window: 0xda000000-0xda0fffff
[ 2.268006] pci 0000:00:09.0: PREFETCH window: disabled
[ 2.272010] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:04
[ 2.276003] pci 0000:00:0b.0: IO window: disabled
[ 2.280008] pci 0000:00:0b.0: MEM window: disabled
[ 2.284013] pci 0000:00:0b.0: PREFETCH window: disabled
[ 2.288010] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:03
[ 2.292003] pci 0000:00:0c.0: IO window: disabled
[ 2.296008] pci 0000:00:0c.0: MEM window: disabled
[ 2.300006] pci 0000:00:0c.0: PREFETCH window: disabled
[ 2.304009] pci 0000:00:0d.0: PCI bridge, secondary bus 0000:02
[ 2.308003] pci 0000:00:0d.0: IO window: disabled
[ 2.312008] pci 0000:00:0d.0: MEM window: disabled
[ 2.316006] pci 0000:00:0d.0: PREFETCH window: disabled
[ 2.320016] pci 0000:00:0e.0: PCI bridge, secondary bus 0000:01
[ 2.324005] pci 0000:00:0e.0: IO window: 0xb000-0xbfff
[ 2.328008] pci 0000:00:0e.0: MEM window: 0xd8000000-0xd9ffffff
[ 2.332007] pci 0000:00:0e.0: PREFETCH window: 0x000000d0000000-0x000000d7ffffff
[ 2.336018] pci 0000:00:09.0: setting latency timer to 64
[ 2.340015] pci 0000:00:0b.0: setting latency timer to 64
[ 2.344014] pci 0000:00:0c.0: setting latency timer to 64
[ 2.348014] pci 0000:00:0d.0: setting latency timer to 64
[ 2.352014] pci 0000:00:0e.0: setting latency timer to 64
[ 2.356006] bus: 00 index 0 io port: [0x00-0xffff]
[ 2.360004] bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff]
[ 2.364004] bus: 05 index 0 io port: [0xc000-0xcfff]
[ 2.368004] bus: 05 index 1 mmio: [0xda000000-0xda0fffff]
[ 2.372004] bus: 05 index 2 mmio: [0x0-0x0]
[ 2.376004] bus: 05 index 3 io port: [0x00-0xffff]
[ 2.380004] bus: 05 index 4 mmio: [0x000000-0xffffffffffffffff]
[ 2.384004] bus: 04 index 0 mmio: [0x0-0x0]
[ 2.388003] bus: 04 index 1 mmio: [0x0-0x0]
[ 2.392003] bus: 04 index 2 mmio: [0x0-0x0]
[ 2.396003] bus: 04 index 3 mmio: [0x0-0x0]
[ 2.400003] bus: 03 index 0 mmio: [0x0-0x0]
[ 2.404003] bus: 03 index 1 mmio: [0x0-0x0]
[ 2.408003] bus: 03 index 2 mmio: [0x0-0x0]
[ 2.412003] bus: 03 index 3 mmio: [0x0-0x0]
[ 2.416003] bus: 02 index 0 mmio: [0x0-0x0]
[ 2.420003] bus: 02 index 1 mmio: [0x0-0x0]
[ 2.424003] bus: 02 index 2 mmio: [0x0-0x0]
[ 2.428003] bus: 02 index 3 mmio: [0x0-0x0]
[ 2.432004] bus: 01 index 0 io port: [0xb000-0xbfff]
[ 2.436004] bus: 01 index 1 mmio: [0xd8000000-0xd9ffffff]
[ 2.440004] bus: 01 index 2 mmio: [0xd0000000-0xd7ffffff]
[ 2.444003] bus: 01 index 3 mmio: [0x0-0x0]
[ 2.448005] initcall pcibios_assign_resources+0x0/0x90 returned 0 after 187500 usecs
[ 2.452005] calling inet_init+0x0/0x210 @ 1
[ 2.456065] NET: Registered protocol family 2
[ 2.500400] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 2.509450] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[ 2.514908] TCP bind hash table entries: 65536 (order: 10, 4194304 bytes)
[ 2.526408] TCP: Hash tables configured (established 131072 bind 65536)
[ 2.528049] TCP reno registered
[ 2.544460] initcall inet_init+0x0/0x210 returned 0 after 85937 usecs
[ 2.548007] calling af_unix_init+0x0/0x70 @ 1
[ 2.552022] NET: Registered protocol family 1
[ 2.556044] initcall af_unix_init+0x0/0x70 returned 0 after 3906 usecs
[ 2.560006] calling populate_rootfs+0x0/0xb0 @ 1
[ 2.564925] initcall populate_rootfs+0x0/0xb0 returned 0 after 0 usecs
[ 2.568007] calling i8259A_init_sysfs+0x0/0x30 @ 1
[ 2.572146] initcall i8259A_init_sysfs+0x0/0x30 returned 0 after 0 usecs
[ 2.580008] calling vsyscall_init+0x0/0x70 @ 1
[ 2.584043] initcall vsyscall_init+0x0/0x70 returned 0 after 0 usecs
[ 2.592005] calling sbf_init+0x0/0xe0 @ 1
[ 2.596004] initcall sbf_init+0x0/0xe0 returned 0 after 0 usecs
[ 2.600005] calling i8237A_init_sysfs+0x0/0x30 @ 1
[ 2.607805] initcall i8237A_init_sysfs+0x0/0x30 returned 0 after 0 usecs
[ 2.612007] calling add_rtc_cmos+0x0/0x40 @ 1
[ 2.619009] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ 2.624007] initcall add_rtc_cmos+0x0/0x40 returned 0 after 7812 usecs
[ 2.632006] calling cache_sysfs_init+0x0/0x70 @ 1
[ 2.639506] initcall cache_sysfs_init+0x0/0x70 returned 0 after 0 usecs
[ 2.640027] calling mce_init_device+0x0/0xa0 @ 1
[ 2.644957] initcall mce_init_device+0x0/0xa0 returned 0 after 0 usecs
[ 2.648007] calling periodic_mcheck_init+0x0/0x50 @ 1
[ 2.652188] initcall periodic_mcheck_init+0x0/0x50 returned 0 after 0 usecs
[ 2.656005] calling thermal_throttle_init_device+0x0/0x90 @ 1
[ 2.660005] initcall thermal_throttle_init_device+0x0/0x90 returned 0 after 0 usecs
[ 2.664004] calling ioapic_init_sysfs+0x0/0xd0 @ 1
[ 2.668359] initcall ioapic_init_sysfs+0x0/0xd0 returned 0 after 0 usecs
[ 2.672073] calling uv_ptc_init+0x0/0x80 @ 1
[ 2.676005] initcall uv_ptc_init+0x0/0x80 returned 0 after 0 usecs
[ 2.684004] calling uv_bau_init+0x0/0x670 @ 1
[ 2.688004] initcall uv_bau_init+0x0/0x670 returned 0 after 0 usecs
[ 2.696004] calling sgi_uv_sysfs_init+0x0/0xb0 @ 1
[ 2.700018] initcall sgi_uv_sysfs_init+0x0/0xb0 returned 0 after 0 usecs
[ 2.708005] calling audit_classes_init+0x0/0xb0 @ 1
[ 2.712024] initcall audit_classes_init+0x0/0xb0 returned 0 after 0 usecs
[ 2.716005] calling start_pageattr_test+0x0/0x50 @ 1
[ 2.724819] initcall start_pageattr_test+0x0/0x50 returned 0 after 0 usecs
[ 2.728005] calling aes_init+0x0/0x20 @ 1
[ 2.732169] alg: cipher: Test 1 failed on encryption for aes-asm
[ 2.740006] 00000000: 00 01 02 03 04 05 06 07 08 08 08 08 08 08 08 08
[ 2.748064] initcall aes_init+0x0/0x20 returned 0 after 15625 usecs
[ 2.752006] calling init_vdso_vars+0x0/0x220 @ 1
[ 2.756020] initcall init_vdso_vars+0x0/0x220 returned 0 after 0 usecs
[ 2.764005] calling ia32_binfmt_init+0x0/0x20 @ 1
[ 2.768029] initcall ia32_binfmt_init+0x0/0x20 returned 0 after 0 usecs
[ 2.776004] calling sysenter_setup+0x0/0x380 @ 1
[ 2.780011] initcall sysenter_setup+0x0/0x380 returned 0 after 0 usecs
[ 2.788005] calling init_sched_debug_procfs+0x0/0x30 @ 1
[ 2.792022] initcall init_sched_debug_procfs+0x0/0x30 returned 0 after 0 usecs
[ 2.800005] calling ioresources_init+0x0/0x40 @ 1
[ 2.804019] initcall ioresources_init+0x0/0x40 returned 0 after 0 usecs
[ 2.812005] calling uid_cache_init+0x0/0x80 @ 1
[ 2.816052] initcall uid_cache_init+0x0/0x80 returned 0 after 0 usecs
[ 2.820005] calling init_posix_timers+0x0/0x110 @ 1
[ 2.828028] initcall init_posix_timers+0x0/0x110 returned 0 after 0 usecs
[ 2.832005] calling init_posix_cpu_timers+0x0/0xe0 @ 1
[ 2.840005] initcall init_posix_cpu_timers+0x0/0xe0 returned 0 after 0 usecs
[ 2.844005] calling nsproxy_cache_init+0x0/0x30 @ 1
[ 2.848017] initcall nsproxy_cache_init+0x0/0x30 returned 0 after 0 usecs
[ 2.856006] calling create_proc_profile+0x0/0x2f0 @ 1
[ 2.860005] initcall create_proc_profile+0x0/0x2f0 returned 0 after 0 usecs
[ 2.868005] calling timekeeping_init_device+0x0/0x30 @ 1
[ 2.876488] initcall timekeeping_init_device+0x0/0x30 returned 0 after 0 usecs
[ 2.880018] calling init_clocksource_sysfs+0x0/0x60 @ 1
[ 2.889256] initcall init_clocksource_sysfs+0x0/0x60 returned 0 after 0 usecs
[ 2.892041] calling init_timer_list_procfs+0x0/0x30 @ 1
[ 2.896023] initcall init_timer_list_procfs+0x0/0x30 returned 0 after 0 usecs
[ 2.900005] calling lockdep_proc_init+0x0/0x80 @ 1
[ 2.904032] initcall lockdep_proc_init+0x0/0x80 returned 0 after 0 usecs
[ 2.908005] calling futex_init+0x0/0xf0 @ 1
[ 2.912047] initcall futex_init+0x0/0xf0 returned 0 after 0 usecs
[ 2.916006] calling init_rttest+0x0/0x160 @ 1
[ 2.925090] Initializing RT-Tester: OK
[ 2.928042] initcall init_rttest+0x0/0x160 returned 0 after 7812 usecs
[ 2.932005] calling proc_dma_init+0x0/0x30 @ 1
[ 2.936014] initcall proc_dma_init+0x0/0x30 returned 0 after 0 usecs
[ 2.940005] calling percpu_modinit+0x0/0x80 @ 1
[ 2.944005] initcall percpu_modinit+0x0/0x80 returned 0 after 0 usecs
[ 2.948005] calling kallsyms_init+0x0/0x30 @ 1
[ 2.952012] initcall kallsyms_init+0x0/0x30 returned 0 after 0 usecs
[ 2.956005] calling backtrace_regression_test+0x0/0x100 @ 1
[ 2.960003] ====[ backtrace testing ]===========
[ 2.964003] Testing a backtrace from process context.
[ 2.968003] The following trace is a kernel self test and not a bug!
[ 2.972005] Pid: 1, comm: swapper Not tainted 2.6.27-06574-g8c86407 #45103
[ 2.976003] Call Trace:
[ 2.978426] [<ffffffff80277bc0>] ? backtrace_regression_test+0x0/0x100
[ 2.980005] [<ffffffff80277bfd>] backtrace_regression_test+0x3d/0x100
[ 2.984005] [<ffffffff802642d9>] ? jiffies_read+0x9/0x20
[ 2.988005] [<ffffffff8026258f>] ? getnstimeofday+0x3f/0xc0
[ 2.992006] [<ffffffff8025e68f>] ? ktime_get_ts+0x4f/0x60
[ 2.996005] [<ffffffff80277bc0>] ? backtrace_regression_test+0x0/0x100
[ 3.000005] [<ffffffff8025e6b6>] ? ktime_get+0x16/0x50
[ 3.004005] [<ffffffff80209040>] do_one_initcall+0x40/0x180
[ 3.008006] [<ffffffff807d6ecb>] ? _spin_unlock+0x2b/0x40
[ 3.012006] [<ffffffff8032234d>] ? proc_register+0x11d/0x1e0
[ 3.016005] [<ffffffff8032252e>] ? create_proc_entry+0x5e/0xa0
[ 3.020005] [<ffffffff802922c6>] ? register_irq_proc+0xc6/0xe0
[ 3.024006] [<ffffffff81644f53>] kernel_init+0x1b3/0x240
[ 3.028006] [<ffffffff8020c969>] child_rip+0xa/0x11
[ 3.032005] [<ffffffff8020be84>] ? restore_args+0x0/0x30
[ 3.036005] [<ffffffff81644da0>] ? kernel_init+0x0/0x240
[ 3.040005] [<ffffffff8020c95f>] ? child_rip+0x0/0x11
[ 3.044003] Testing a backtrace from irq context.
[ 3.048003] The following trace is a kernel self test and not a bug!
[ 3.052015] Pid: 4, comm: ksoftirqd/0 Not tainted 2.6.27-06574-g8c86407 #45103
[ 3.056001] Call Trace:
[ 3.058422] <IRQ> [<ffffffff8026cb79>] ? trace_hardirqs_on_caller+0x89/0x160
[ 3.064003] [<ffffffff80277bae>] backtrace_test_irq_callback+0xe/0x20
[ 3.068004] [<ffffffff802498dc>] tasklet_action+0x6c/0xf0
[ 3.072003] [<ffffffff8024968d>] __do_softirq+0x9d/0x180
[ 3.076003] [<ffffffff8020cccc>] call_softirq+0x1c/0x40
[ 3.080001] <EOI> [<ffffffff8020e1aa>] do_softirq+0x6a/0xb0
[ 3.084003] [<ffffffff802497f5>] ksoftirqd+0x85/0x100
[ 3.088004] [<ffffffff80249770>] ? ksoftirqd+0x0/0x100
[ 3.092003] [<ffffffff8025adc3>] kthread+0x53/0x80
[ 3.096004] [<ffffffff8020c969>] child_rip+0xa/0x11
[ 3.100004] [<ffffffff8020be84>] ? restore_args+0x0/0x30
[ 3.104003] [<ffffffff8025ad70>] ? kthread+0x0/0x80
[ 3.108003] [<ffffffff8020c95f>] ? child_rip+0x0/0x11
[ 3.112015] Testing a saved backtrace.
[ 3.116022] The following trace is a kernel self test and not a bug!
[ 3.120006] [<ffffffff80216edf>] save_stack_trace+0x2f/0x50
[ 3.124003] [<ffffffff80277c9b>] backtrace_regression_test+0xdb/0x100
[ 3.128003] [<ffffffff80209040>] do_one_initcall+0x40/0x180
[ 3.132003] [<ffffffff81644f53>] kernel_init+0x1b3/0x240
[ 3.136003] [<ffffffff8020c969>] child_rip+0xa/0x11
[ 3.144010] [<ffffffffffffffff>] 0xffffffffffffffff
[ 3.148003] ====[ end of backtrace testing ]====
[ 3.152005] initcall backtrace_regression_test+0x0/0x100 returned 0 after 187500 usecs
[ 3.156005] calling pid_namespaces_init+0x0/0x30 @ 1
[ 3.160027] initcall pid_namespaces_init+0x0/0x30 returned 0 after 0 usecs
[ 3.164005] calling audit_init+0x0/0x180 @ 1
[ 3.168004] audit: initializing netlink socket (disabled)
[ 3.172078] type=2000 audit(1224773428.172:1): initialized
[ 3.176014] initcall audit_init+0x0/0x180 returned 0 after 7812 usecs
[ 3.184006] calling audit_tree_init+0x0/0x50 @ 1
[ 3.188008] initcall audit_tree_init+0x0/0x50 returned 0 after 0 usecs
[ 3.192005] calling init_kprobes+0x0/0x1d0 @ 1
[ 3.208258] Kprobe smoke test started
[ 3.262485] Kprobe smoke test passed successfully
[ 3.264011] initcall init_kprobes+0x0/0x1d0 returned 0 after 66406 usecs
[ 3.268006] calling utsname_sysctl_init+0x0/0x20 @ 1
[ 3.272078] initcall utsname_sysctl_init+0x0/0x20 returned 0 after 0 usecs
[ 3.276005] calling init_sched_switch_trace+0x0/0x50 @ 1
[ 3.280009] Testing tracer sched_switch: PASSED
[ 3.424596] initcall init_sched_switch_trace+0x0/0x50 returned 0 after 140625 usecs
[ 3.428006] calling init_stack_trace+0x0/0x20 @ 1
[ 3.432006] Testing tracer sysprof: PASSED
[ 3.540592] initcall init_stack_trace+0x0/0x20 returned 0 after 105468 usecs
[ 3.548006] calling init_function_trace+0x0/0x20 @ 1
[ 3.552006] Testing tracer ftrace: PASSED
[ 3.715685] Testing dynamic ftrace: PASSED
[ 3.972897] initcall init_function_trace+0x0/0x20 returned 0 after 410156 usecs
[ 3.980010] calling init_wakeup_tracer+0x0/0x20 @ 1
[ 3.984007] Testing tracer wakeup: PASSED
[ 4.304019] initcall init_wakeup_tracer+0x0/0x20 returned 0 after 312500 usecs
[ 4.308006] calling stack_trace_init+0x0/0x90 @ 1
[ 4.320030] initcall stack_trace_init+0x0/0x90 returned 0 after 3906 usecs
[ 4.324007] calling init_mmio_trace+0x0/0x20 @ 1
[ 4.328007] initcall init_mmio_trace+0x0/0x20 returned 0 after 0 usecs
[ 4.336005] calling init_per_zone_pages_min+0x0/0x60 @ 1
[ 4.340082] initcall init_per_zone_pages_min+0x0/0x60 returned 0 after 0 usecs
[ 4.348005] calling pdflush_init+0x0/0x20 @ 1
[ 4.355554] initcall pdflush_init+0x0/0x20 returned 0 after 0 usecs
[ 4.356006] calling kswapd_init+0x0/0x70 @ 1
[ 4.360084] initcall kswapd_init+0x0/0x70 returned 0 after 0 usecs
[ 4.368005] calling setup_vmstat+0x0/0x50 @ 1
[ 4.372012] initcall setup_vmstat+0x0/0x50 returned 0 after 0 usecs
[ 4.376005] calling mm_sysfs_init+0x0/0x30 @ 1
[ 4.380023] initcall mm_sysfs_init+0x0/0x30 returned 0 after 0 usecs
[ 4.388005] calling hugetlb_init+0x0/0x350 @ 1
[ 4.392009] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 4.400044] initcall hugetlb_init+0x0/0x350 returned 0 after 7812 usecs
[ 4.404005] calling init_tmpfs+0x0/0x50 @ 1
[ 4.408342] initcall init_tmpfs+0x0/0x50 returned 0 after 0 usecs
[ 4.416005] calling slab_sysfs_init+0x0/0x100 @ 1
[ 4.450836] initcall slab_sysfs_init+0x0/0x100 returned 0 after 27343 usecs
[ 4.452007] calling fasync_init+0x0/0x30 @ 1
[ 4.456584] initcall fasync_init+0x0/0x30 returned 0 after 0 usecs
[ 4.464009] calling inotify_setup+0x0/0x20 @ 1
[ 4.468482] initcall inotify_setup+0x0/0x20 returned 0 after 0 usecs
[ 4.472005] calling inotify_user_setup+0x0/0xc0 @ 1
[ 4.482013] initcall inotify_user_setup+0x0/0xc0 returned 0 after 0 usecs
[ 4.484007] calling aio_setup+0x0/0xc0 @ 1
[ 4.488694] initcall aio_setup+0x0/0xc0 returned 0 after 0 usecs
[ 4.492008] calling init_sys32_ioctl+0x0/0x90 @ 1
[ 4.500021] initcall init_sys32_ioctl+0x0/0x90 returned 0 after 0 usecs
[ 4.504005] calling init_mbcache+0x0/0x20 @ 1
[ 4.508008] initcall init_mbcache+0x0/0x20 returned 0 after 0 usecs
[ 4.516005] calling dquot_init+0x0/0x100 @ 1
[ 4.520004] VFS: Disk quotas dquot_6.5.1
[ 4.526280] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 4.532010] initcall dquot_init+0x0/0x100 returned 0 after 11718 usecs
[ 4.536046] calling vmcore_init+0x0/0xa40 @ 1
[ 4.540006] initcall vmcore_init+0x0/0xa40 returned 0 after 0 usecs
[ 4.548005] calling configfs_init+0x0/0xf0 @ 1
[ 4.554661] initcall configfs_init+0x0/0xf0 returned 0 after 0 usecs
[ 4.556025] calling init_devpts_fs+0x0/0x50 @ 1
[ 4.560505] initcall init_devpts_fs+0x0/0x50 returned 0 after 0 usecs
[ 4.564006] calling init_ext3_fs+0x0/0x80 @ 1
[ 4.568279] initcall init_ext3_fs+0x0/0x80 returned 0 after 0 usecs
[ 4.572008] calling journal_init+0x0/0xf0 @ 1
[ 4.581436] initcall journal_init+0x0/0xf0 returned 0 after 0 usecs
[ 4.584050] calling init_ramfs_fs+0x0/0x20 @ 1
[ 4.592008] initcall init_ramfs_fs+0x0/0x20 returned 0 after 0 usecs
[ 4.596005] calling init_hugetlbfs_fs+0x0/0xc0 @ 1
[ 4.604106] initcall init_hugetlbfs_fs+0x0/0xc0 returned 0 after 3906 usecs
[ 4.608087] calling init_fat_fs+0x0/0x60 @ 1
[ 4.612267] initcall init_fat_fs+0x0/0x60 returned 0 after 3906 usecs
[ 4.620007] calling init_vfat_fs+0x0/0x20 @ 1
[ 4.624008] initcall init_vfat_fs+0x0/0x20 returned 0 after 0 usecs
[ 4.632005] calling vxfs_init+0x0/0x70 @ 1
[ 4.637488] initcall vxfs_init+0x0/0x70 returned 0 after 0 usecs
[ 4.640007] calling init_nfs_fs+0x0/0x130 @ 1
[ 4.650092] initcall init_nfs_fs+0x0/0x130 returned 0 after 3906 usecs
[ 4.652031] calling init_nlm+0x0/0x30 @ 1
[ 4.656121] initcall init_nlm+0x0/0x30 returned 0 after 0 usecs
[ 4.660005] calling init_nls_cp850+0x0/0x20 @ 1
[ 4.664060] initcall init_nls_cp850+0x0/0x20 returned 0 after 0 usecs
[ 4.668005] calling init_nls_cp855+0x0/0x20 @ 1
[ 4.672006] initcall init_nls_cp855+0x0/0x20 returned 0 after 0 usecs
[ 4.676005] calling init_nls_cp857+0x0/0x20 @ 1
[ 4.680006] initcall init_nls_cp857+0x0/0x20 returned 0 after 0 usecs
[ 4.684005] calling init_nls_cp862+0x0/0x20 @ 1
[ 4.688006] initcall init_nls_cp862+0x0/0x20 returned 0 after 0 usecs
[ 4.692005] calling init_nls_cp864+0x0/0x20 @ 1
[ 4.696006] initcall init_nls_cp864+0x0/0x20 returned 0 after 0 usecs
[ 4.700005] calling init_nls_cp869+0x0/0x20 @ 1
[ 4.704006] initcall init_nls_cp869+0x0/0x20 returned 0 after 0 usecs
[ 4.708005] calling init_nls_cp874+0x0/0x20 @ 1
[ 4.712006] initcall init_nls_cp874+0x0/0x20 returned 0 after 0 usecs
[ 4.716005] calling init_nls_cp949+0x0/0x20 @ 1
[ 4.720006] initcall init_nls_cp949+0x0/0x20 returned 0 after 0 usecs
[ 4.724005] calling init_nls_ascii+0x0/0x20 @ 1
[ 4.728006] initcall init_nls_ascii+0x0/0x20 returned 0 after 0 usecs
[ 4.732005] calling init_nls_iso8859_2+0x0/0x20 @ 1
[ 4.736006] initcall init_nls_iso8859_2+0x0/0x20 returned 0 after 0 usecs
[ 4.740005] calling init_nls_iso8859_3+0x0/0x20 @ 1
[ 4.744006] initcall init_nls_iso8859_3+0x0/0x20 returned 0 after 0 usecs
[ 4.748005] calling init_nls_iso8859_5+0x0/0x20 @ 1
[ 4.752006] initcall init_nls_iso8859_5+0x0/0x20 returned 0 after 0 usecs
[ 4.756005] calling init_nls_iso8859_6+0x0/0x20 @ 1
[ 4.760006] initcall init_nls_iso8859_6+0x0/0x20 returned 0 after 0 usecs
[ 4.764005] calling init_nls_iso8859_7+0x0/0x20 @ 1
[ 4.768006] initcall init_nls_iso8859_7+0x0/0x20 returned 0 after 0 usecs
[ 4.776006] calling init_hpfs_fs+0x0/0x70 @ 1
[ 4.780362] initcall init_hpfs_fs+0x0/0x70 returned 0 after 0 usecs
[ 4.784026] calling init_qnx4_fs+0x0/0x80 @ 1
[ 4.791712] QNX4 filesystem 0.2.3 registered.
[ 4.792008] initcall init_qnx4_fs+0x0/0x80 returned 0 after 3906 usecs
[ 4.796005] calling init_jfs_fs+0x0/0x230 @ 1
[ 4.800281] JFS: nTxBlock = 7682, nTxLock = 61461
[ 4.817073] initcall init_jfs_fs+0x0/0x230 returned 0 after 15625 usecs
[ 4.820005] calling init_befs_fs+0x0/0x90 @ 1
[ 4.824005] BeFS version: 0.9.3
[ 4.828430] initcall init_befs_fs+0x0/0x90 returned 0 after 3906 usecs
[ 4.832006] calling init_mqueue_fs+0x0/0xe0 @ 1
[ 4.836197] initcall init_mqueue_fs+0x0/0xe0 returned 0 after 0 usecs
[ 4.844031] calling key_proc_init+0x0/0x60 @ 1
[ 4.848037] initcall key_proc_init+0x0/0x60 returned 0 after 0 usecs
[ 4.856006] calling selinux_nf_ip_init+0x0/0x70 @ 1
[ 4.860005] SELinux: Registering netfilter hooks
[ 4.864057] initcall selinux_nf_ip_init+0x0/0x70 returned 0 after 3906 usecs
[ 4.872006] calling init_sel_fs+0x0/0x70 @ 1
[ 4.877357] initcall init_sel_fs+0x0/0x70 returned 0 after 0 usecs
[ 4.884006] calling selnl_init+0x0/0x50 @ 1
[ 4.888054] initcall selnl_init+0x0/0x50 returned 0 after 0 usecs
[ 4.892006] calling sel_netif_init+0x0/0x70 @ 1
[ 4.896013] initcall sel_netif_init+0x0/0x70 returned 0 after 0 usecs
[ 4.904006] calling sel_netnode_init+0x0/0xb0 @ 1
[ 4.908010] initcall sel_netnode_init+0x0/0xb0 returned 0 after 0 usecs
[ 4.916006] calling sel_netport_init+0x0/0xb0 @ 1
[ 4.920010] initcall sel_netport_init+0x0/0xb0 returned 0 after 0 usecs
[ 4.928006] calling aurule_init+0x0/0x40 @ 1
[ 4.932007] initcall aurule_init+0x0/0x40 returned 0 after 0 usecs
[ 4.936006] calling crypto_algapi_init+0x0/0x10 @ 1
[ 4.944017] initcall crypto_algapi_init+0x0/0x10 returned 0 after 0 usecs
[ 4.948006] calling chainiv_module_init+0x0/0x20 @ 1
[ 4.956073] initcall chainiv_module_init+0x0/0x20 returned 0 after 0 usecs
[ 4.960006] calling eseqiv_module_init+0x0/0x20 @ 1
[ 4.968010] initcall eseqiv_module_init+0x0/0x20 returned 0 after 0 usecs
[ 4.972006] calling seqiv_module_init+0x0/0x20 @ 1
[ 4.976010] initcall seqiv_module_init+0x0/0x20 returned 0 after 0 usecs
[ 4.984006] calling hmac_module_init+0x0/0x20 @ 1
[ 4.988010] initcall hmac_module_init+0x0/0x20 returned 0 after 0 usecs
[ 4.996006] calling md4_mod_init+0x0/0x20 @ 1
[ 5.002273] initcall md4_mod_init+0x0/0x20 returned 0 after 0 usecs
[ 5.004008] calling md5_mod_init+0x0/0x20 @ 1
[ 5.008065] initcall md5_mod_init+0x0/0x20 returned 0 after 0 usecs
[ 5.012007] calling rmd160_mod_init+0x0/0x20 @ 1
[ 5.020016] initcall rmd160_mod_init+0x0/0x20 returned 0 after 3906 usecs
[ 5.024005] calling rmd320_mod_init+0x0/0x20 @ 1
[ 5.028066] initcall rmd320_mod_init+0x0/0x20 returned 0 after 0 usecs
[ 5.036008] calling sha1_generic_mod_init+0x0/0x20 @ 1
[ 5.043254] initcall sha1_generic_mod_init+0x0/0x20 returned 0 after 0 usecs
[ 5.044008] calling sha256_generic_mod_init+0x0/0x50 @ 1
[ 5.048067] initcall sha256_generic_mod_init+0x0/0x50 returned 0 after 0 usecs
[ 5.056008] calling wp512_mod_init+0x0/0x90 @ 1
[ 5.064017] initcall wp512_mod_init+0x0/0x90 returned 0 after 3906 usecs
[ 5.068006] calling tgr192_mod_init+0x0/0x90 @ 1
[ 5.072063] initcall tgr192_mod_init+0x0/0x90 returned 0 after 0 usecs
[ 5.080007] calling crypto_ecb_module_init+0x0/0x20 @ 1
[ 5.084010] initcall crypto_ecb_module_init+0x0/0x20 returned 0 after 0 usecs
[ 5.092013] calling crypto_cbc_module_init+0x0/0x20 @ 1
[ 5.096010] initcall crypto_cbc_module_init+0x0/0x20 returned 0 after 0 usecs
[ 5.104005] calling crypto_cts_module_init+0x0/0x20 @ 1
[ 5.112009] initcall crypto_cts_module_init+0x0/0x20 returned 0 after 0 usecs
[ 5.116005] calling crypto_module_init+0x0/0x20 @ 1
[ 5.124009] initcall crypto_module_init+0x0/0x20 returned 0 after 0 usecs
[ 5.128005] calling crypto_module_init+0x0/0x20 @ 1
[ 5.136009] initcall crypto_module_init+0x0/0x20 returned 0 after 0 usecs
[ 5.140005] calling crypto_ctr_module_init+0x0/0x50 @ 1
[ 5.148013] initcall crypto_ctr_module_init+0x0/0x50 returned 0 after 0 usecs
[ 5.152005] calling crypto_gcm_module_init+0x0/0x70 @ 1
[ 5.160017] initcall crypto_gcm_module_init+0x0/0x70 returned 0 after 0 usecs
[ 5.164005] calling crypto_ccm_module_init+0x0/0x70 @ 1
[ 5.172017] initcall crypto_ccm_module_init+0x0/0x70 returned 0 after 0 usecs
[ 5.180005] calling des_generic_mod_init+0x0/0x50 @ 1
[ 5.185702] initcall des_generic_mod_init+0x0/0x50 returned 0 after 0 usecs
[ 5.188007] calling serpent_mod_init+0x0/0x50 @ 1
[ 5.192065] initcall serpent_mod_init+0x0/0x50 returned 0 after 0 usecs
[ 5.200008] calling aes_init+0x0/0x360 @ 1
[ 5.204453] initcall aes_init+0x0/0x360 returned 0 after 0 usecs
[ 5.208008] calling arc4_init+0x0/0x20 @ 1
[ 5.212070] initcall arc4_init+0x0/0x20 returned 0 after 0 usecs
[ 5.220008] calling khazad_mod_init+0x0/0x20 @ 1
[ 5.225400] initcall khazad_mod_init+0x0/0x20 returned 0 after 0 usecs
[ 5.228008] calling salsa20_generic_mod_init+0x0/0x20 @ 1
[ 5.232069] initcall salsa20_generic_mod_init+0x0/0x20 returned 0 after 0 usecs
[ 5.240007] calling deflate_mod_init+0x0/0x20 @ 1
[ 5.245990] initcall deflate_mod_init+0x0/0x20 returned 0 after 0 usecs
[ 5.248010] calling michael_mic_init+0x0/0x20 @ 1
[ 5.252080] initcall michael_mic_init+0x0/0x20 returned 0 after 0 usecs
[ 5.256008] calling krng_mod_init+0x0/0x20 @ 1
[ 5.264468] alg: No test for stdrng (krng)
[ 5.268058] initcall krng_mod_init+0x0/0x20 returned 0 after 3906 usecs
[ 5.272007] calling bsg_init+0x0/0x150 @ 1
[ 5.279893] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[ 5.280010] initcall bsg_init+0x0/0x150 returned 0 after 3906 usecs
[ 5.284006] calling noop_init+0x0/0x20 @ 1
[ 5.288078] io scheduler noop registered
[ 5.292006] initcall noop_init+0x0/0x20 returned 0 after 3906 usecs
[ 5.296005] calling cfq_init+0x0/0xa0 @ 1
[ 5.304503] io scheduler cfq registered (default)
[ 5.308008] initcall cfq_init+0x0/0xa0 returned 0 after 7812 usecs
[ 5.312049] calling debug_objects_init_debugfs+0x0/0x70 @ 1
[ 5.316006] initcall debug_objects_init_debugfs+0x0/0x70 returned 0 after 0 usecs
[ 5.320005] calling percpu_counter_startup+0x0/0x20 @ 1
[ 5.324009] initcall percpu_counter_startup+0x0/0x20 returned 0 after 0 usecs
[ 5.328005] calling dynamic_printk_init+0x0/0xa0 @ 1
[ 5.336125] initcall dynamic_printk_init+0x0/0xa0 returned 0 after 3906 usecs
[ 5.340007] calling pci_init+0x0/0x40 @ 1
[ 5.344047] pci 0000:00:00.0: Enabling HT MSI Mapping
[ 5.364258] pci 0000:00:0b.0: Enabling HT MSI Mapping
[ 5.368040] pci 0000:00:0b.0: Found enabled HT MSI Mapping
[ 5.372055] pci 0000:00:0c.0: Enabling HT MSI Mapping
[ 5.376027] pci 0000:00:0c.0: Found enabled HT MSI Mapping
[ 5.380041] pci 0000:00:0d.0: Enabling HT MSI Mapping
[ 5.384027] pci 0000:00:0d.0: Found enabled HT MSI Mapping
[ 5.388040] pci 0000:00:0e.0: Enabling HT MSI Mapping
[ 5.392027] pci 0000:00:0e.0: Found enabled HT MSI Mapping
[ 5.396051] pci 0000:01:00.0: Boot video device
[ 5.400019] initcall pci_init+0x0/0x40 returned 0 after 54687 usecs
[ 5.404006] calling pci_proc_init+0x0/0x70 @ 1
[ 5.408357] initcall pci_proc_init+0x0/0x70 returned 0 after 0 usecs
[ 5.412006] calling vgg2432a4_init+0x0/0x20 @ 1
[ 5.416253] initcall vgg2432a4_init+0x0/0x20 returned 0 after 0 usecs
[ 5.420007] calling tdo24m_init+0x0/0x20 @ 1
[ 5.424071] initcall tdo24m_init+0x0/0x20 returned 0 after 0 usecs
[ 5.432010] calling rand_initialize+0x0/0x40 @ 1
[ 5.436064] initcall rand_initialize+0x0/0x40 returned 0 after 0 usecs
[ 5.444005] calling tty_init+0x0/0x110 @ 1
[ 5.465069] initcall tty_init+0x0/0x110 returned 0 after 15625 usecs
[ 5.468009] calling pty_init+0x0/0x5c0 @ 1
[ 5.619412] initcall pty_init+0x0/0x5c0 returned 0 after 136718 usecs
[ 5.624248] calling sysrq_init+0x0/0x30 @ 1
[ 5.628028] initcall sysrq_init+0x0/0x30 returned 0 after 0 usecs
[ 5.636005] calling rp_init+0x0/0x1a30 @ 1
[ 5.640004] RocketPort device driver module, version 2.09, 12-June-2003
[ 5.644066] No rocketport ports found; unloading driver
[ 5.652109] initcall rp_init+0x0/0x1a30 returned -6 after 11718 usecs
[ 5.656005] initcall rp_init+0x0/0x1a30 returned with error code -6
[ 5.664005] calling ip2_loadmain+0x0/0x14d0 @ 1
[ 5.668004] Computone IntelliPort Plus multiport driver version 1.2.14
[ 5.676712] initcall ip2_loadmain+0x0/0x14d0 returned 0 after 7812 usecs
[ 5.680229] calling synclink_init+0x0/0x2c0 @ 1
[ 5.684005] SyncLink serial driver $Revision: 4.38 $
[ 5.732943] SyncLink serial driver $Revision: 4.38 $, tty major#253
[ 5.736012] initcall synclink_init+0x0/0x2c0 returned 0 after 50781 usecs
[ 5.744388] calling n_hdlc_init+0x0/0xb0 @ 1
[ 5.748005] HDLC line discipline: version $Revision: 4.8 $, maxframe=4096
[ 5.756005] N_HDLC line discipline registered.
[ 5.760005] initcall n_hdlc_init+0x0/0xb0 returned 0 after 11718 usecs
[ 5.768004] calling rio_init+0x0/0x12a0 @ 1
[ 5.776751] initcall rio_init+0x0/0x12a0 returned -5 after 3906 usecs
[ 5.780078] initcall rio_init+0x0/0x12a0 returned with error code -5
[ 5.784005] calling raw_init+0x0/0xf0 @ 1
[ 5.788142] initcall raw_init+0x0/0xf0 returned 0 after 0 usecs
[ 5.796008] calling agp_init+0x0/0x30 @ 1
[ 5.800004] Linux agpgart interface v0.103
[ 5.804005] initcall agp_init+0x0/0x30 returned 0 after 3906 usecs
[ 5.808005] calling agp_via_init+0x0/0x30 @ 1
[ 5.814999] initcall agp_via_init+0x0/0x30 returned 0 after 0 usecs
[ 5.820007] calling ipmi_init_msghandler_mod+0x0/0x10 @ 1
[ 5.826901] ipmi message handler version 39.2
[ 5.828034] initcall ipmi_init_msghandler_mod+0x0/0x10 returned 0 after 3906 usecs
[ 5.832026] calling ipmi_wdog_init+0x0/0x160 @ 1
[ 5.836157] IPMI Watchdog: driver initialized
[ 5.840005] initcall ipmi_wdog_init+0x0/0x160 returned 0 after 3906 usecs
[ 5.844005] calling hangcheck_init+0x0/0x90 @ 1
[ 5.848004] Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
[ 5.852004] Hangcheck: Using get_cycles().
[ 5.856006] initcall hangcheck_init+0x0/0x90 returned 0 after 7812 usecs
[ 5.860005] calling serial8250_init+0x0/0x160 @ 1
[ 5.864004] Serial: 8250/16550 driver4 ports, IRQ sharing disabled
[ 5.868199] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 5.878975] initcall serial8250_init+0x0/0x160 returned 0 after 11718 usecs
[ 5.880010] calling jsm_init_module+0x0/0x60 @ 1
[ 5.884221] initcall jsm_init_module+0x0/0x60 returned 0 after 0 usecs
[ 5.892031] calling init_kgdboc+0x0/0x20 @ 1
[ 5.896006] initcall init_kgdboc+0x0/0x20 returned 0 after 0 usecs
[ 5.900007] calling topology_sysfs_init+0x0/0x50 @ 1
[ 5.908071] initcall topology_sysfs_init+0x0/0x50 returned 0 after 0 usecs
[ 5.912005] calling cpqarray_init+0x0/0x2a0 @ 1
[ 5.920004] Compaq SMART2 Driver (v 2.6.0)
[ 5.924590] initcall cpqarray_init+0x0/0x2a0 returned 0 after 3906 usecs
[ 5.928108] calling cciss_init+0x0/0x30 @ 1
[ 5.932004] HP CISS Driver (v 3.6.20)
[ 5.936266] initcall cciss_init+0x0/0x30 returned 0 after 3906 usecs
[ 5.940009] calling DAC960_init_module+0x0/0x60 @ 1
[ 5.944175] initcall DAC960_init_module+0x0/0x60 returned 0 after 0 usecs
[ 5.952010] calling init_kgdbts+0x0/0x20 @ 1
[ 5.956027] initcall init_kgdbts+0x0/0x20 returned 0 after 0 usecs
[ 5.964005] calling sm501_base_init+0x0/0x30 @ 1
[ 5.969283] initcall sm501_base_init+0x0/0x30 returned 0 after 0 usecs
[ 5.972007] calling e1000_init_module+0x0/0x70 @ 1
[ 5.980042] e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k6
[ 5.984004] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 5.992664] initcall e1000_init_module+0x0/0x70 returned 0 after 11718 usecs
[ 5.996006] calling cas_init+0x0/0x40 @ 1
[ 6.004046] initcall cas_init+0x0/0x40 returned 0 after 3906 usecs
[ 6.008026] calling eepro100_init_module+0x0/0x20 @ 1
[ 6.012213] initcall eepro100_init_module+0x0/0x20 returned 0 after 0 usecs
[ 6.020007] calling e100_init_module+0x0/0x60 @ 1
[ 6.024004] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
[ 6.032004] e100: Copyright(c) 1999-2006 Intel Corporation
[ 6.038964] initcall e100_init_module+0x0/0x60 returned 0 after 11718 usecs
[ 6.040006] calling r6040_init+0x0/0x20 @ 1
[ 6.044167] initcall r6040_init+0x0/0x20 returned 0 after 0 usecs
[ 6.052007] calling acenic_init+0x0/0x20 @ 1
[ 6.056914] initcall acenic_init+0x0/0x20 returned 0 after 0 usecs
[ 6.060007] calling natsemi_init_mod+0x0/0x20 @ 1
[ 6.064184] initcall natsemi_init_mod+0x0/0x20 returned 0 after 3906 usecs
[ 6.072007] calling tg3_init+0x0/0x20 @ 1
[ 6.079148] initcall tg3_init+0x0/0x20 returned 0 after 0 usecs
[ 6.080007] calling sky2_init_module+0x0/0x60 @ 1
[ 6.084004] sky2 driver version 1.22
[ 6.088219] initcall sky2_init_module+0x0/0x60 returned 0 after 3906 usecs
[ 6.096007] calling starfire_init+0x0/0x20 @ 1
[ 6.101133] initcall starfire_init+0x0/0x20 returned 0 after 0 usecs
[ 6.104007] calling davicom_init+0x0/0x70 @ 1
[ 6.112479] initcall davicom_init+0x0/0x70 returned 0 after 3906 usecs
[ 6.116027] calling cicada_init+0x0/0x50 @ 1
[ 6.120401] initcall cicada_init+0x0/0x50 returned 0 after 0 usecs
[ 6.124007] calling lxt_init+0x0/0x50 @ 1
[ 6.128165] initcall lxt_init+0x0/0x50 returned 0 after 0 usecs
[ 6.136008] calling fixed_mdio_bus_init+0x0/0x110 @ 1
[ 6.141618] Fixed MDIO Bus: probed
[ 6.144008] initcall fixed_mdio_bus_init+0x0/0x110 returned 0 after 3906 usecs
[ 6.152042] calling hamachi_init+0x0/0x20 @ 1
[ 6.156856] initcall hamachi_init+0x0/0x20 returned 0 after 0 usecs
[ 6.160007] calling net_olddevs_init+0x0/0xb0 @ 1
[ 6.164010] initcall net_olddevs_init+0x0/0xb0 returned 0 after 0 usecs
[ 6.172005] calling init_nic+0x0/0x20 @ 1
[ 6.176051] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
[ 6.184033] forcedeth 0000:00:0a.0: setting latency timer to 64
[ 6.188078] nv_probe: set workaround bit for reversed mac addr
[ 6.718088] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:13:d4:dc:41:12
[ 6.720008] forcedeth 0000:00:0a.0: highdma csum timirq gbit lnktim desc-v3
[ 6.724176] initcall init_nic+0x0/0x20 returned 0 after 535156 usecs
[ 6.728008] calling ql3xxx_init_module+0x0/0x20 @ 1
[ 6.737012] initcall ql3xxx_init_module+0x0/0x20 returned 0 after 0 usecs
[ 6.740007] calling dummy_init_module+0x0/0xf0 @ 1
[ 6.744457] initcall dummy_init_module+0x0/0xf0 returned 0 after 0 usecs
[ 6.752009] calling dfx_init+0x0/0x20 @ 1
[ 6.757576] initcall dfx_init+0x0/0x20 returned 0 after 0 usecs
[ 6.760007] calling cp_init+0x0/0x20 @ 1
[ 6.764068] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 6.768005] 8139cp 0000:05:07.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
[ 6.772004] 8139cp 0000:05:07.0: Try the "8139too" driver instead.
[ 6.776169] initcall cp_init+0x0/0x20 returned 0 after 11718 usecs
[ 6.780007] calling rtl8139_init_module+0x0/0x20 @ 1
[ 6.784067] 8139too Fast Ethernet driver 0.9.28
[ 6.793791] eth1: RealTek RTL8139 at 0xc000, 00:c0:df:03:68:5d, IRQ 11
[ 6.796006] eth1: Identified 8139 chip type 'RTL-8139B'
[ 6.800169] initcall rtl8139_init_module+0x0/0x20 returned 0 after 15625 usecs
[ 6.808007] calling eql_init_module+0x0/0x80 @ 1
[ 6.812004] Equalizer2002: Simon Janes (simon@ncm.com) and David S. Miller (davem@redhat.com)
[ 6.823557] initcall eql_init_module+0x0/0x80 returned 0 after 7812 usecs
[ 6.824007] calling tun_init+0x0/0xb0 @ 1
[ 6.828007] tun: Universal TUN/TAP device driver, 1.6
[ 6.832004] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 6.836364] initcall tun_init+0x0/0xb0 returned 0 after 7812 usecs
[ 6.840007] calling rio_init+0x0/0x20 @ 1
[ 6.848383] initcall rio_init+0x0/0x20 returned 0 after 0 usecs
[ 6.852007] calling rtl8169_init_module+0x0/0x20 @ 1
[ 6.856196] initcall rtl8169_init_module+0x0/0x20 returned 0 after 0 usecs
[ 6.864007] calling enc28j60_init+0x0/0x30 @ 1
[ 6.870992] initcall enc28j60_init+0x0/0x30 returned 0 after 0 usecs
[ 6.872007] calling olympic_pci_init+0x0/0x20 @ 1
[ 6.876198] initcall olympic_pci_init+0x0/0x20 returned 0 after 0 usecs
[ 6.884007] calling xl_pci_init+0x0/0x20 @ 1
[ 6.889418] initcall xl_pci_init+0x0/0x20 returned 0 after 0 usecs
[ 6.892007] calling init_dlci+0x0/0x40 @ 1
[ 6.896063] DLCI driver v0.35, 4 Jan 1997, mike.mclagan@linux.org.
[ 6.900005] initcall init_dlci+0x0/0x40 returned 0 after 3906 usecs
[ 6.904005] calling catc_init+0x0/0x40 @ 1
[ 6.908164] usbcore: registered new interface driver catc
[ 6.912012] catc: v2.8:CATC EL1210A NetMate USB Ethernet driver
[ 6.916006] initcall catc_init+0x0/0x40 returned 0 after 7812 usecs
[ 6.924005] calling usb_rtl8150_init+0x0/0x30 @ 1
[ 6.928004] rtl8150: v0.6.2 (2004/08/27):rtl8150 based usb-ethernet driver
[ 6.937704] usbcore: registered new interface driver rtl8150
[ 6.940014] initcall usb_rtl8150_init+0x0/0x30 returned 0 after 11718 usecs
[ 6.944005] calling cdc_init+0x0/0x20 @ 1
[ 6.948134] usbcore: registered new interface driver cdc_ether
[ 6.956014] initcall cdc_init+0x0/0x20 returned 0 after 7812 usecs
[ 6.960005] calling usbnet_init+0x0/0x20 @ 1
[ 6.966898] usbcore: registered new interface driver gl620a
[ 6.968014] initcall usbnet_init+0x0/0x20 returned 0 after 3906 usecs
[ 6.972013] calling net1080_init+0x0/0x20 @ 1
[ 6.976134] usbcore: registered new interface driver net1080
[ 6.984021] initcall net1080_init+0x0/0x20 returned 0 after 7812 usecs
[ 6.988005] calling plusb_init+0x0/0x20 @ 1
[ 6.995915] usbcore: registered new interface driver plusb
[ 6.996014] initcall plusb_init+0x0/0x20 returned 0 after 3906 usecs
[ 7.000005] calling rndis_init+0x0/0x20 @ 1
[ 7.004134] usbcore: registered new interface driver rndis_host
[ 7.012014] initcall rndis_init+0x0/0x20 returned 0 after 7812 usecs
[ 7.020005] calling zaurus_init+0x0/0x20 @ 1
[ 7.024763] usbcore: registered new interface driver zaurus
[ 7.028016] initcall zaurus_init+0x0/0x20 returned 0 after 3906 usecs
[ 7.032005] calling usbnet_init+0x0/0x30 @ 1
[ 7.036014] initcall usbnet_init+0x0/0x30 returned 0 after 0 usecs
[ 7.040005] calling ipw2100_init+0x0/0x90 @ 1
[ 7.044004] ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, git-1.2.2
[ 7.048004] ipw2100: Copyright(c) 2003-2006 Intel Corporation
[ 7.056186] initcall ipw2100_init+0x0/0x90 returned 0 after 11718 usecs
[ 7.060007] calling strip_init_driver+0x0/0x70 @ 1
[ 7.064004] STRIP: Version 1.3A-STUART.CHESHIRE (unlimited channels)
[ 7.072025] initcall strip_init_driver+0x0/0x70 returned 0 after 7812 usecs
[ 7.080005] calling init_orinoco+0x0/0x20 @ 1
[ 7.084004] orinoco 0.15 (David Gibson <hermes@gibson.dropbear.id.au>, Pavel Roskin <proski@gnu.org>, et al)
[ 7.092005] initcall init_orinoco+0x0/0x20 returned 0 after 7812 usecs
[ 7.100005] calling init_hermes+0x0/0x10 @ 1
[ 7.104005] initcall init_hermes+0x0/0x10 returned 0 after 0 usecs
[ 7.112005] calling init_hermes_dld+0x0/0x10 @ 1
[ 7.116005] initcall init_hermes_dld+0x0/0x10 returned 0 after 0 usecs
[ 7.120005] calling prism54_module_init+0x0/0x40 @ 1
[ 7.128004] Loaded prism54 driver, version 1.2
[ 7.133082] initcall prism54_module_init+0x0/0x40 returned 0 after 3906 usecs
[ 7.136007] calling hostap_init+0x0/0x50 @ 1
[ 7.140022] initcall hostap_init+0x0/0x50 returned 0 after 0 usecs
[ 7.144005] calling init_prism2_pci+0x0/0x20 @ 1
[ 7.148198] initcall init_prism2_pci+0x0/0x20 returned 0 after 0 usecs
[ 7.156007] calling rndis_wlan_init+0x0/0x20 @ 1
[ 7.162892] usbcore: registered new interface driver rndis_wlan
[ 7.164015] initcall rndis_wlan_init+0x0/0x20 returned 0 after 3906 usecs
[ 7.168005] calling sixpack_init_driver+0x0/0x50 @ 1
[ 7.172004] AX.25: 6pack driver, Revision: 0.3.0
[ 7.176006] initcall sixpack_init_driver+0x0/0x50 returned 0 after 3906 usecs
[ 7.180005] calling yam_init_driver+0x0/0x150 @ 1
[ 7.184004] YAM driver version 0.8 by F1OAT/F6FBB
[ 7.196044] initcall yam_init_driver+0x0/0x150 returned 0 after 11718 usecs
[ 7.200050] calling init_netconsole+0x0/0x260 @ 1
[ 7.208540] console [netcon0] enabled
[ 7.212007] netconsole: network logging started
[ 7.216007] initcall init_netconsole+0x0/0x260 returned 0 after 7812 usecs
[ 7.220005] calling videodev_init+0x0/0xa0 @ 1
[ 7.228006] Linux video capture interface: v2.00
[ 7.233208] initcall videodev_init+0x0/0xa0 returned 0 after 3906 usecs
[ 7.236046] calling zatm_init_module+0x0/0x20 @ 1
[ 7.240177] initcall zatm_init_module+0x0/0x20 returned 0 after 0 usecs
[ 7.244016] calling uPD98402_module_init+0x0/0x10 @ 1
[ 7.252007] initcall uPD98402_module_init+0x0/0x10 returned 0 after 0 usecs
[ 7.256005] calling ia_module_init+0x0/0x80 @ 1
[ 7.264200] initcall ia_module_init+0x0/0x80 returned 0 after 3906 usecs
[ 7.268007] calling fore200e_module_init+0x0/0x30 @ 1
[ 7.272004] fore200e: FORE Systems 200E-series ATM driver - version 0.3e
[ 7.276165] initcall fore200e_module_init+0x0/0x30 returned 0 after 3906 usecs
[ 7.284008] calling eni_init+0x0/0x20 @ 1
[ 7.290271] initcall eni_init+0x0/0x20 returned 0 after 0 usecs
[ 7.292007] calling spi_transport_init+0x0/0x30 @ 1
[ 7.296122] initcall spi_transport_init+0x0/0x30 returned 0 after 0 usecs
[ 7.304009] calling fc_transport_init+0x0/0x50 @ 1
[ 7.309714] initcall fc_transport_init+0x0/0x50 returned 0 after 0 usecs
[ 7.316009] calling scsi_dh_init+0x0/0x50 @ 1
[ 7.320045] initcall scsi_dh_init+0x0/0x50 returned 0 after 0 usecs
[ 7.324007] calling rdac_init+0x0/0x40 @ 1
[ 7.328051] rdac: device handler registered
[ 7.332007] initcall rdac_init+0x0/0x40 returned 0 after 3906 usecs
[ 7.340006] calling adpt_init+0x0/0x1110 @ 1
[ 7.344004] Loading Adaptec I2O RAID: Version 2.4 Build 5go
[ 7.348005] Detecting Adaptec I2O RAID controllers...
[ 7.356029] initcall adpt_init+0x0/0x1110 returned -19 after 11718 usecs
[ 7.360005] calling ahc_linux_init+0x0/0x70 @ 1
[ 7.368024] initcall ahc_linux_init+0x0/0x70 returned 0 after 3906 usecs
[ 7.372080] calling ips_module_init+0x0/0x220 @ 1
[ 7.376182] initcall ips_module_init+0x0/0x220 returned -19 after 0 usecs
[ 7.384019] calling init_this_scsi_driver+0x0/0x110 @ 1
[ 7.388075] scsi: <fdomain> Detection failed (no card)
[ 7.396008] initcall init_this_scsi_driver+0x0/0x110 returned -19 after 7812 usecs
[ 7.404007] calling qla1280_init+0x0/0x20 @ 1
[ 7.409188] initcall qla1280_init+0x0/0x20 returned 0 after 0 usecs
[ 7.412007] calling dc395x_module_init+0x0/0x20 @ 1
[ 7.416194] initcall dc395x_module_init+0x0/0x20 returned 0 after 0 usecs
[ 7.420008] calling megasas_init+0x0/0x170 @ 1
[ 7.424004] megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008
[ 7.433864] initcall megasas_init+0x0/0x170 returned 0 after 7812 usecs
[ 7.436007] calling atp870u_init+0x0/0x20 @ 1
[ 7.440177] initcall atp870u_init+0x0/0x20 returned 0 after 0 usecs
[ 7.444008] calling inia100_init+0x0/0x20 @ 1
[ 7.451891] initcall inia100_init+0x0/0x20 returned 0 after 0 usecs
[ 7.452007] calling hptiop_module_init+0x0/0x40 @ 1
[ 7.456004] RocketRAID 3xxx/4xxx Controller driver v1.3 (071203)
[ 7.460165] initcall hptiop_module_init+0x0/0x40 returned 0 after 3906 usecs
[ 7.468009] calling stex_init+0x0/0x30 @ 1
[ 7.472004] stex: Promise SuperTrak EX Driver version: 3.6.0000.1
[ 7.478642] initcall stex_init+0x0/0x30 returned 0 after 3906 usecs
[ 7.480007] calling init_osst+0x0/0x150 @ 1
[ 7.484004] osst :I: Tape driver with OnStream support version 0.99.4
[ 7.484008] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
[ 7.488123] Driver 'osst' needs updating - please use bus_type methods
[ 7.496984] initcall init_osst+0x0/0x150 returned 0 after 11718 usecs
[ 7.500007] calling init_sd+0x0/0x100 @ 1
[ 7.504261] Driver 'sd' needs updating - please use bus_type methods
[ 7.508127] initcall init_sd+0x0/0x100 returned 0 after 3906 usecs
[ 7.516028] calling init_sg+0x0/0x170 @ 1
[ 7.520583] initcall init_sg+0x0/0x170 returned 0 after 0 usecs
[ 7.524028] calling init_ch_module+0x0/0xc0 @ 1
[ 7.528006] SCSI Media Changer driver v0.25
[ 7.532122] Driver 'ch' needs updating - please use bus_type methods
[ 7.541936] initcall init_ch_module+0x0/0xc0 returned 0 after 11718 usecs
[ 7.544007] calling ahci_init+0x0/0x20 @ 1
[ 7.548206] initcall ahci_init+0x0/0x20 returned 0 after 0 usecs
[ 7.552027] calling piix_init+0x0/0x30 @ 1
[ 7.559374] initcall piix_init+0x0/0x30 returned 0 after 0 usecs
[ 7.560007] calling qs_ata_init+0x0/0x20 @ 1
[ 7.564212] initcall qs_ata_init+0x0/0x20 returned 0 after 0 usecs
[ 7.568009] calling sil_init+0x0/0x20 @ 1
[ 7.576351] initcall sil_init+0x0/0x20 returned 0 after 0 usecs
[ 7.580007] calling nv_init+0x0/0x20 @ 1
[ 7.584189] initcall nv_init+0x0/0x20 returned 0 after 0 usecs
[ 7.592009] calling ali_init+0x0/0x20 @ 1
[ 7.596497] initcall ali_init+0x0/0x20 returned 0 after 0 usecs
[ 7.600007] calling amd_init+0x0/0x20 @ 1
[ 7.604052] pata_amd 0000:00:06.0: version 0.3.10
[ 7.608145] pata_amd 0000:00:06.0: setting latency timer to 64
[ 7.612378] scsi0 : pata_amd
[ 7.618667] scsi1 : pata_amd
[ 7.620352] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 7.624007] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 7.800536] ata1.00: ATA-6: HDS722525VLAT80, V36OA60A, max UDMA/100
[ 7.804006] ata1.00: 488397168 sectors, multi 1: LBA48
[ 7.812016] ata1: nv_mode_filter: 0x3f39f&0x3f07f->0x3f01f, BIOS=0x3f000 (0xc60000c0) ACPI=0x0
[ 7.844470] ata1.00: configured for UDMA/100
[ 8.008299] ata2.01: ATAPI: DVDRW IDE 16X, VER A079, max UDMA/66
[ 8.012013] ata2: nv_mode_filter: 0x1f39f&0x707f->0x701f, BIOS=0x7000 (0xc60000c0) ACPI=0x0
[ 8.032192] ata2.01: configured for UDMA/33
[ 8.037223] isa bounce pool size: 16 pages
[ 8.041392] scsi 0:0:0:0: Direct-Access ATA HDS722525VLAT80 V36O PQ: 0 ANSI: 5
[ 8.053223] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250GB/232GiB)
[ 8.060101] sd 0:0:0:0: [sda] Write Protect is off
[ 8.064007] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 8.068196] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.081954] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250GB/232GiB)
[ 8.088094] sd 0:0:0:0: [sda] Write Protect is off
[ 8.092005] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 8.096169] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.108013] sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 sda10 >
[ 8.192481] sd 0:0:0:0: [sda] Attached SCSI disk
[ 8.196163] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 8.206515] scsi 1:0:1:0: CD-ROM DVDRW IDE 16X A079 PQ: 0 ANSI: 5
[ 8.216446] scsi 1:0:1:0: Attached scsi generic sg1 type 5
[ 8.220222] initcall amd_init+0x0/0x20 returned 0 after 601562 usecs
[ 8.228052] calling atiixp_init+0x0/0x20 @ 1
[ 8.233202] initcall atiixp_init+0x0/0x20 returned 0 after 0 usecs
[ 8.236009] calling cmd64x_init+0x0/0x20 @ 1
[ 8.243929] initcall cmd64x_init+0x0/0x20 returned 0 after 0 usecs
[ 8.244008] calling cs5520_init+0x0/0x20 @ 1
[ 8.248214] initcall cs5520_init+0x0/0x20 returned 0 after 0 usecs
[ 8.256009] calling efar_init+0x0/0x20 @ 1
[ 8.261069] initcall efar_init+0x0/0x20 returned 0 after 0 usecs
[ 8.264009] calling it8213_init+0x0/0x20 @ 1
[ 8.271598] initcall it8213_init+0x0/0x20 returned 0 after 0 usecs
[ 8.272008] calling ninja32_init+0x0/0x20 @ 1
[ 8.276189] initcall ninja32_init+0x0/0x20 returned 0 after 0 usecs
[ 8.284009] calling ns87410_init+0x0/0x20 @ 1
[ 8.289209] initcall ns87410_init+0x0/0x20 returned 0 after 0 usecs
[ 8.292007] calling mpiix_init+0x0/0x20 @ 1
[ 8.296168] initcall mpiix_init+0x0/0x20 returned 0 after 0 usecs
[ 8.304009] calling oldpiix_init+0x0/0x20 @ 1
[ 8.310531] initcall oldpiix_init+0x0/0x20 returned 0 after 0 usecs
[ 8.312007] calling pdc202xx_init+0x0/0x20 @ 1
[ 8.316167] initcall pdc202xx_init+0x0/0x20 returned 0 after 0 usecs
[ 8.320017] calling sc1200_init+0x0/0x20 @ 1
[ 8.328311] initcall sc1200_init+0x0/0x20 returned 0 after 3906 usecs
[ 8.332007] calling serverworks_init+0x0/0x20 @ 1
[ 8.336169] initcall serverworks_init+0x0/0x20 returned 0 after 0 usecs
[ 8.344009] calling sil680_init+0x0/0x20 @ 1
[ 8.350755] initcall sil680_init+0x0/0x20 returned 0 after 0 usecs
[ 8.352007] calling ata_generic_init+0x0/0x20 @ 1
[ 8.356195] initcall ata_generic_init+0x0/0x20 returned 0 after 0 usecs
[ 8.364009] calling at25_init+0x0/0x20 @ 1
[ 8.368752] initcall at25_init+0x0/0x20 returned 0 after 0 usecs
[ 8.372007] calling tle62x0_init+0x0/0x20 @ 1
[ 8.376147] initcall tle62x0_init+0x0/0x20 returned 0 after 0 usecs
[ 8.384009] calling aoe_init+0x0/0xc0 @ 1
[ 8.391525] aoe: AoE v47 initialised.
[ 8.392264] initcall aoe_init+0x0/0xc0 returned 0 after 3906 usecs
[ 8.396006] calling mon_init+0x0/0x140 @ 1
[ 8.400718] initcall mon_init+0x0/0x140 returned 0 after 0 usecs
[ 8.404008] calling ehci_hcd_init+0x0/0x120 @ 1
[ 8.408144] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 8.412146] ehci_hcd 0000:00:02.1: can't find IRQ for PCI INT B; probably buggy MP table
[ 8.416017] ehci_hcd 0000:00:02.1: Found HC with no IRQ. Check BIOS/PCI 0000:00:02.1 setup!
[ 8.420008] ehci_hcd 0000:00:02.1: init 0000:00:02.1 fail, -19
[ 8.424211] initcall ehci_hcd_init+0x0/0x120 returned 0 after 15625 usecs
[ 8.432047] calling ohci_hcd_mod_init+0x0/0x120 @ 1
[ 8.436005] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 8.440094] ohci_hcd 0000:00:02.0: can't find IRQ for PCI INT A; probably buggy MP table
[ 8.448007] ohci_hcd 0000:00:02.0: Found HC with no IRQ. Check BIOS/PCI 0000:00:02.0 setup!
[ 8.460010] ohci_hcd 0000:00:02.0: init 0000:00:02.0 fail, -19
[ 8.466406] initcall ohci_hcd_mod_init+0x0/0x120 returned 0 after 27343 usecs
[ 8.468007] calling uhci_hcd_init+0x0/0x100 @ 1
[ 8.472004] uhci_hcd: USB Universal Host Controller Interface driver
[ 8.476673] initcall uhci_hcd_init+0x0/0x100 returned 0 after 3906 usecs
[ 8.480007] calling c67x00_init+0x0/0x20 @ 1
[ 8.488054] initcall c67x00_init+0x0/0x20 returned 0 after 3906 usecs
[ 8.492009] calling acm_init+0x0/0x150 @ 1
[ 8.498932] usbcore: registered new interface driver cdc_acm
[ 8.500013] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
[ 8.504006] initcall acm_init+0x0/0x150 returned 0 after 7812 usecs
[ 8.508005] calling usb_stor_init+0x0/0x50 @ 1
[ 8.512004] Initializing USB Mass Storage driver...
[ 8.516174] usbcore: registered new interface driver usb-storage
[ 8.520027] USB Mass Storage support registered.
[ 8.524007] initcall usb_stor_init+0x0/0x50 returned 0 after 11718 usecs
[ 8.532008] calling adu_init+0x0/0xa0 @ 1
[ 8.536005] drivers/usb/misc/adutux.c : adu_init : enter
[ 8.543770] usbcore: registered new interface driver adutux
[ 8.544013] adutux adutux (see www.ontrak.net) v0.0.13
[ 8.548004] adutux is an experimental driver. Use at your own risk
[ 8.552004] drivers/usb/misc/adutux.c : adu_init : leave, return value 0
[ 8.556006] initcall adu_init+0x0/0xa0 returned 0 after 19531 usecs
[ 8.560005] calling cypress_init+0x0/0x40 @ 1
[ 8.564137] usbcore: registered new interface driver cypress_cy7c63
[ 8.572016] initcall cypress_init+0x0/0x40 returned 0 after 7812 usecs
[ 8.576013] calling usb_cytherm_init+0x0/0x60 @ 1
[ 8.583855] usbcore: registered new interface driver cytherm
[ 8.584012] cytherm: v1.0:Cypress USB Thermometer driver
[ 8.588006] initcall usb_cytherm_init+0x0/0x60 returned 0 after 7812 usecs
[ 8.592005] calling emi26_init+0x0/0x20 @ 1
[ 8.596135] usbcore: registered new interface driver emi26 - firmware loader
[ 8.604016] initcall emi26_init+0x0/0x20 returned 0 after 7812 usecs
[ 8.608006] calling ftdi_elan_init+0x0/0x180 @ 1
[ 8.612006] driver ftdi-elan built at 16:24:24 on Oct 23 2008
[ 8.622161] usbcore: registered new interface driver ftdi-elan
[ 8.624013] initcall ftdi_elan_init+0x0/0x180 returned 0 after 11718 usecs
[ 8.628008] calling usb_lcd_init+0x0/0x40 @ 1
[ 8.632218] usbcore: registered new interface driver usblcd
[ 8.636012] initcall usb_lcd_init+0x0/0x40 returned 0 after 3906 usecs
[ 8.640026] calling lego_usb_tower_init+0x0/0x90 @ 1
[ 8.644004] drivers/usb/misc/legousbtower.c: lego_usb_tower_init: enter
[ 8.648156] usbcore: registered new interface driver legousbtower
[ 8.656034] legousbtower: v0.96:LEGO USB Tower Driver
[ 8.660005] drivers/usb/misc/legousbtower.c: lego_usb_tower_init: leave, return value 0
[ 8.668008] initcall lego_usb_tower_init+0x0/0x90 returned 0 after 23437 usecs
[ 8.676007] calling usb_rio_init+0x0/0x40 @ 1
[ 8.681950] usbcore: registered new interface driver rio500
[ 8.684012] rio500: v1.1:USB Rio 500 driver
[ 8.688006] initcall usb_rio_init+0x0/0x40 returned 0 after 7812 usecs
[ 8.692005] calling usb_sisusb_init+0x0/0x20 @ 1
[ 8.696135] usbcore: registered new interface driver sisusb
[ 8.704016] initcall usb_sisusb_init+0x0/0x20 returned 0 after 7812 usecs
[ 8.708006] calling i8042_init+0x0/0xd0 @ 1
[ 8.718415] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 8.720135] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 8.728021] initcall i8042_init+0x0/0xd0 returned 0 after 15625 usecs
[ 8.732006] calling pcips2_init+0x0/0x20 @ 1
[ 8.739902] initcall pcips2_init+0x0/0x20 returned 0 after 0 usecs
[ 8.740044] calling mousedev_init+0x0/0x70 @ 1
[ 8.744721] mice: PS/2 mouse device common for all mice
[ 8.748009] initcall mousedev_init+0x0/0x70 returned 0 after 3906 usecs
[ 8.752026] calling atkbd_init+0x0/0x20 @ 1
[ 8.756117] initcall atkbd_init+0x0/0x20 returned 0 after 0 usecs
[ 8.764063] calling xtkbd_init+0x0/0x20 @ 1
[ 8.769841] initcall xtkbd_init+0x0/0x20 returned 0 after 0 usecs
[ 8.772008] calling nkbd_init+0x0/0x20 @ 1
[ 8.780121] initcall nkbd_init+0x0/0x20 returned 0 after 3906 usecs
[ 8.784010] calling skbd_init+0x0/0x20 @ 1
[ 8.790795] initcall skbd_init+0x0/0x20 returned 0 after 0 usecs
[ 8.792008] calling adi_init+0x0/0x20 @ 1
[ 8.792242] input: AT Translated Set 2 keyboard as /class/input/input0
[ 8.796087] initcall adi_init+0x0/0x20 returned 0 after 0 usecs
[ 8.804008] calling analog_init+0x0/0x130 @ 1
[ 8.810067] initcall analog_init+0x0/0x130 returned 0 after 0 usecs
[ 8.812007] calling gf2k_init+0x0/0x20 @ 1
[ 8.816243] initcall gf2k_init+0x0/0x20 returned 0 after 0 usecs
[ 8.820008] calling iforce_init+0x0/0x60 @ 1
[ 8.824157] usbcore: registered new interface driver iforce
[ 8.832772] initcall iforce_init+0x0/0x60 returned 0 after 7812 usecs
[ 8.836007] calling joydump_init+0x0/0x20 @ 1
[ 8.840138] initcall joydump_init+0x0/0x20 returned 0 after 0 usecs
[ 8.848027] calling twidjoy_init+0x0/0x20 @ 1
[ 8.854556] initcall twidjoy_init+0x0/0x20 returned 0 after 0 usecs
[ 8.856027] calling warrior_init+0x0/0x20 @ 1
[ 8.860169] initcall warrior_init+0x0/0x20 returned 0 after 0 usecs
[ 8.864010] calling zhenhua_init+0x0/0x20 @ 1
[ 8.872143] initcall zhenhua_init+0x0/0x20 returned 0 after 3906 usecs
[ 8.876009] calling usb_acecad_init+0x0/0x40 @ 1
[ 8.884015] usbcore: registered new interface driver usb_acecad
[ 8.888031] acecad: v3.2:USB Acecad Flair tablet driver
[ 8.892007] initcall usb_acecad_init+0x0/0x40 returned 0 after 11718 usecs
[ 8.896006] calling ads7846_init+0x0/0x20 @ 1
[ 8.900194] initcall ads7846_init+0x0/0x20 returned 0 after 0 usecs
[ 8.908010] calling gunze_init+0x0/0x20 @ 1
[ 8.913222] initcall gunze_init+0x0/0x20 returned 0 after 0 usecs
[ 8.916008] calling fujitsu_init+0x0/0x20 @ 1
[ 8.920156] initcall fujitsu_init+0x0/0x20 returned 0 after 0 usecs
[ 8.928010] calling inexio_init+0x0/0x20 @ 1
[ 8.934594] initcall inexio_init+0x0/0x20 returned 0 after 0 usecs
[ 8.936008] calling usb_keyspan_init+0x0/0x40 @ 1
[ 8.940161] usbcore: registered new interface driver keyspan_remote
[ 8.944017] initcall usb_keyspan_init+0x0/0x40 returned 0 after 3906 usecs
[ 8.952007] calling abituguru_init+0x0/0x180 @ 1
[ 8.956008] abituguru: no Abit uGuru found, data = 0xFF, cmd = 0xFF
[ 8.964008] initcall abituguru_init+0x0/0x180 returned -19 after 7812 usecs
[ 8.972007] calling f71882fg_init+0x0/0x120 @ 1
[ 8.976014] f71882fg: Not a Fintek device
[ 8.980017] f71882fg: Not a Fintek device
[ 8.984007] initcall f71882fg_init+0x0/0x120 returned -19 after 7812 usecs
[ 8.988007] calling sm_it87_init+0x0/0x390 @ 1
[ 8.996029] it87: Found IT8712F chip at 0x290, revision 7
[ 9.000010] it87: in3 is VCC (+5V)
[ 9.004005] it87: in7 is VCCH (+5V Stand-By)
[ 9.009953] it87 it87.656: Detected broken BIOS defaults, disabling PWM interface
[ 9.012924] initcall sm_it87_init+0x0/0x390 returned 0 after 15625 usecs
[ 9.016007] calling max1111_init+0x0/0x20 @ 1
[ 9.020164] initcall max1111_init+0x0/0x20 returned 0 after 0 usecs
[ 9.024010] calling smsc47b397_init+0x0/0x1e0 @ 1
[ 9.032033] initcall smsc47b397_init+0x0/0x1e0 returned -19 after 0 usecs
[ 9.036006] calling sm_via686a_init+0x0/0x20 @ 1
[ 9.044127] initcall sm_via686a_init+0x0/0x20 returned 0 after 3906 usecs
[ 9.048007] calling wdtpci_init+0x0/0x20 @ 1
[ 9.052222] initcall wdtpci_init+0x0/0x20 returned 0 after 0 usecs
[ 9.060010] calling acq_init+0x0/0x70 @ 1
[ 9.064004] WDT driver for Acquire single board computer initialising.
[ 9.072581] acquirewdt: I/O address 0x0043 already in use
[ 9.076023] acquirewdt: probe of acquirewdt failed with error -5
[ 9.080011] initcall acq_init+0x0/0x70 returned 0 after 15625 usecs
[ 9.084006] calling advwdt_init+0x0/0x70 @ 1
[ 9.088004] WDT driver for Advantech single board computer initialising.
[ 9.092800] advantechwdt: initialized. timeout=60 sec (nowayout=0)
[ 9.096015] initcall advwdt_init+0x0/0x70 returned 0 after 7812 usecs
[ 9.100030] calling watchdog_init+0x0/0x1b0 @ 1
[ 9.104049] initcall watchdog_init+0x0/0x1b0 returned -19 after 0 usecs
[ 9.108005] calling alim7101_wdt_init+0x0/0x200 @ 1
[ 9.112004] alim7101_wdt: Steve Hill <steve@navaho.co.uk>.
[ 9.116023] alim7101_wdt: ALi M7101 PMU not present - WDT not set
[ 9.120006] initcall alim7101_wdt_init+0x0/0x200 returned -16 after 7812 usecs
[ 9.124006] initcall alim7101_wdt_init+0x0/0x200 returned with error code -16
[ 9.128008] calling wafwdt_init+0x0/0x190 @ 1
[ 9.132004] WDT driver for Wafer 5823 single board computer initialising.
[ 9.136010] Wafer 5823 WDT: I/O address 0x0443 already in use
[ 9.140008] initcall wafwdt_init+0x0/0x190 returned -5 after 7812 usecs
[ 9.144005] initcall wafwdt_init+0x0/0x190 returned with error code -5
[ 9.148005] calling pc87413_init+0x0/0xb0 @ 1
[ 9.152004] pc87413 WDT: Version 1.1 at io 0x2E
[ 9.156006] pc87413 WDT: cannot register miscdev on minor=130 (err=-16)
[ 9.160006] initcall pc87413_init+0x0/0xb0 returned -16 after 7812 usecs
[ 9.164006] initcall pc87413_init+0x0/0xb0 returned with error code -16
[ 9.168006] calling cpu5wdt_init_module+0x0/0x160 @ 1
[ 9.172008] cpu5wdt: sorry, was my fault
[ 9.176005] cpu5wdt: misc_register failed
[ 9.180008] initcall cpu5wdt_init_module+0x0/0x160 returned -16 after 7812 usecs
[ 9.184006] initcall cpu5wdt_init_module+0x0/0x160 returned with error code -16
[ 9.188006] calling wdt_init+0x0/0x210 @ 1
[ 9.192004] WDT driver for the Winbond(TM) W83627HF/THF/HG Super I/O chip initialising.
[ 9.196024] w83627hf/thf/hg WDT: Watchdog already running. Resetting timeout to 60 sec
[ 9.200020] w83627hf/thf/hg WDT: cannot register miscdev on minor=130 (err=-16)
[ 9.204008] initcall wdt_init+0x0/0x210 returned -16 after 11718 usecs
[ 9.208006] initcall wdt_init+0x0/0x210 returned with error code -16
[ 9.212006] calling telephony_init+0x0/0x50 @ 1
[ 9.216004] Linux telephony interface: v1.00
[ 9.220027] initcall telephony_init+0x0/0x50 returned 0 after 3906 usecs
[ 9.224006] calling raid0_init+0x0/0x20 @ 1
[ 9.228072] md: raid0 personality registered for level 0
[ 9.232007] initcall raid0_init+0x0/0x20 returned 0 after 3906 usecs
[ 9.236006] calling raid_init+0x0/0x20 @ 1
[ 9.240005] md: raid10 personality registered for level 10
[ 9.244006] initcall raid_init+0x0/0x20 returned 0 after 3906 usecs
[ 9.248006] calling kcapi_init+0x0/0xa0 @ 1
[ 9.252089] CAPI Subsystem Rev 1.1.2.8
[ 9.256006] initcall kcapi_init+0x0/0xa0 returned 0 after 3906 usecs
[ 9.260005] calling cpufreq_gov_dbs_init+0x0/0x20 @ 1
[ 9.264007] initcall cpufreq_gov_dbs_init+0x0/0x20 returned 0 after 0 usecs
[ 9.268005] calling init_ladder+0x0/0x20 @ 1
[ 9.272051] cpuidle: using governor ladder
[ 9.276006] initcall init_ladder+0x0/0x20 returned 0 after 3906 usecs
[ 9.280005] calling heartbeat_trig_init+0x0/0x20 @ 1
[ 9.284189] initcall heartbeat_trig_init+0x0/0x20 returned 0 after 0 usecs
[ 9.288005] calling init_soundcore+0x0/0x70 @ 1
[ 9.292149] initcall init_soundcore+0x0/0x70 returned 0 after 0 usecs
[ 9.296067] calling sysctl_core_init+0x0/0x30 @ 1
[ 9.300600] initcall sysctl_core_init+0x0/0x30 returned 0 after 3906 usecs
[ 9.308007] calling flow_cache_init+0x0/0x1e0 @ 1
[ 9.316029] initcall flow_cache_init+0x0/0x1e0 returned 0 after 3906 usecs
[ 9.320005] calling llc_init+0x0/0x20 @ 1
[ 9.324008] initcall llc_init+0x0/0x20 returned 0 after 0 usecs
[ 9.328007] calling snap_init+0x0/0x40 @ 1
[ 9.332043] initcall snap_init+0x0/0x40 returned 0 after 0 usecs
[ 9.336005] calling rif_init+0x0/0xa0 @ 1
[ 9.340112] initcall rif_init+0x0/0xa0 returned 0 after 0 usecs
[ 9.344005] calling blackhole_module_init+0x0/0x20 @ 1
[ 9.348007] initcall blackhole_module_init+0x0/0x20 returned 0 after 0 usecs
[ 9.352005] calling hfsc_init+0x0/0x20 @ 1
[ 9.356006] initcall hfsc_init+0x0/0x20 returned 0 after 0 usecs
[ 9.360005] calling sfq_module_init+0x0/0x20 @ 1
[ 9.364006] initcall sfq_module_init+0x0/0x20 returned 0 after 0 usecs
[ 9.368005] calling teql_init+0x0/0xf0 @ 1
[ 9.376170] initcall teql_init+0x0/0xf0 returned 0 after 3906 usecs
[ 9.380005] calling prio_module_init+0x0/0x20 @ 1
[ 9.384008] initcall prio_module_init+0x0/0x20 returned 0 after 0 usecs
[ 9.392006] calling init_route4+0x0/0x20 @ 1
[ 9.396073] initcall init_route4+0x0/0x20 returned 0 after 0 usecs
[ 9.404007] calling init_basic+0x0/0x20 @ 1
[ 9.408016] initcall init_basic+0x0/0x20 returned 0 after 0 usecs
[ 9.412007] calling cls_flow_init+0x0/0x20 @ 1
[ 9.416006] initcall cls_flow_init+0x0/0x20 returned 0 after 0 usecs
[ 9.424028] calling nfnetlink_init+0x0/0x70 @ 1
[ 9.428004] Netfilter messages via NETLINK v0.30.
[ 9.432062] initcall nfnetlink_init+0x0/0x70 returned 0 after 3906 usecs
[ 9.440007] calling nfnetlink_queue_init+0x0/0xd0 @ 1
[ 9.444074] initcall nfnetlink_queue_init+0x0/0xd0 returned 0 after 0 usecs
[ 9.452007] calling nfnetlink_log_init+0x0/0xd0 @ 1
[ 9.456025] initcall nfnetlink_log_init+0x0/0xd0 returned 0 after 0 usecs
[ 9.464007] calling sysctl_ipv4_init+0x0/0x60 @ 1
[ 9.472491] initcall sysctl_ipv4_init+0x0/0x60 returned 0 after 3906 usecs
[ 9.476006] calling ipgre_init+0x0/0xd0 @ 1
[ 9.480006] GRE over IPv4 tunneling driver
[ 9.490216] initcall ipgre_init+0x0/0xd0 returned 0 after 7812 usecs
[ 9.492007] calling ah4_init+0x0/0x70 @ 1
[ 9.496009] initcall ah4_init+0x0/0x70 returned 0 after 0 usecs
[ 9.500005] calling ipcomp4_init+0x0/0x70 @ 1
[ 9.504007] initcall ipcomp4_init+0x0/0x70 returned 0 after 0 usecs
[ 9.508005] calling ipip_init+0x0/0xc0 @ 1
[ 9.512064] initcall ipip_init+0x0/0xc0 returned 0 after 0 usecs
[ 9.516005] calling xfrm4_beet_init+0x0/0x20 @ 1
[ 9.520007] initcall xfrm4_beet_init+0x0/0x20 returned 0 after 0 usecs
[ 9.524005] calling tunnel4_init+0x0/0x70 @ 1
[ 9.528010] initcall tunnel4_init+0x0/0x70 returned 0 after 0 usecs
[ 9.532006] calling ipv4_netfilter_init+0x0/0x20 @ 1
[ 9.536052] initcall ipv4_netfilter_init+0x0/0x20 returned 0 after 0 usecs
[ 9.540005] calling cubictcp_register+0x0/0x70 @ 1
[ 9.544005] TCP cubic registered
[ 9.548006] initcall cubictcp_register+0x0/0x70 returned 0 after 3906 usecs
[ 9.552005] calling packet_init+0x0/0x50 @ 1
[ 9.556007] NET: Registered protocol family 17
[ 9.560078] initcall packet_init+0x0/0x50 returned 0 after 3906 usecs
[ 9.564006] calling ipsec_pfkey_init+0x0/0xa0 @ 1
[ 9.568013] NET: Registered protocol family 15
[ 9.572047] initcall ipsec_pfkey_init+0x0/0xa0 returned 0 after 3906 usecs
[ 9.576006] calling br_init+0x0/0xf0 @ 1
[ 9.580754] Bridge firewalling registered
[ 9.584064] initcall br_init+0x0/0xf0 returned 0 after 3906 usecs
[ 9.588030] calling dsa_init_module+0x0/0x20 @ 1
[ 9.592007] initcall dsa_init_module+0x0/0x20 returned 0 after 0 usecs
[ 9.596005] calling edsa_init_module+0x0/0x20 @ 1
[ 9.600007] initcall edsa_init_module+0x0/0x20 returned 0 after 0 usecs
[ 9.604005] calling trailer_init_module+0x0/0x20 @ 1
[ 9.608007] initcall trailer_init_module+0x0/0x20 returned 0 after 0 usecs
[ 9.612005] calling mv88e6060_init+0x0/0x20 @ 1
[ 9.616051] initcall mv88e6060_init+0x0/0x20 returned 0 after 0 usecs
[ 9.620006] calling mv88e6123_61_65_init+0x0/0x20 @ 1
[ 9.624007] initcall mv88e6123_61_65_init+0x0/0x20 returned 0 after 0 usecs
[ 9.628008] calling mv88e6131_init+0x0/0x20 @ 1
[ 9.632007] initcall mv88e6131_init+0x0/0x20 returned 0 after 0 usecs
[ 9.636005] calling dsa_init_module+0x0/0x20 @ 1
[ 9.640158] initcall dsa_init_module+0x0/0x20 returned 0 after 0 usecs
[ 9.648029] calling x25_init+0x0/0x70 @ 1
[ 9.652008] NET: Registered protocol family 9
[ 9.656011] X.25 for Linux Version 0.2
[ 9.660350] initcall x25_init+0x0/0x70 returned 0 after 7812 usecs
[ 9.668007] calling rose_proto_init+0x0/0x2f0 @ 1
[ 9.699054] NET: Registered protocol family 11
[ 9.704192] initcall rose_proto_init+0x0/0x2f0 returned 0 after 31250 usecs
[ 9.708008] calling ax25_init+0x0/0xb0 @ 1
[ 9.712006] NET: Registered protocol family 3
[ 9.716139] initcall ax25_init+0x0/0xb0 returned 0 after 7812 usecs
[ 9.724007] calling init_sunrpc+0x0/0x80 @ 1
[ 9.732845] RPC: Registered udp transport module.
[ 9.736005] RPC: Registered tcp transport module.
[ 9.740014] initcall init_sunrpc+0x0/0x80 returned 0 after 11718 usecs
[ 9.744006] calling econet_proto_init+0x0/0x1e0 @ 1
[ 9.748008] NET: Registered protocol family 19
[ 9.752281] initcall econet_proto_init+0x0/0x1e0 returned 0 after 3906 usecs
[ 9.756006] calling phonet_init+0x0/0x90 @ 1
[ 9.760005] NET: Registered protocol family 35
[ 9.764706] initcall phonet_init+0x0/0x90 returned 0 after 3906 usecs
[ 9.768008] calling pep_register+0x0/0x20 @ 1
[ 9.772337] initcall pep_register+0x0/0x20 returned 0 after 0 usecs
[ 9.776009] calling ieee80211_init+0x0/0x30 @ 1
[ 9.784028] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 9.788004] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[ 9.796007] initcall ieee80211_init+0x0/0x30 returned 0 after 11718 usecs
[ 9.804007] calling ieee80211_crypto_init+0x0/0x20 @ 1
[ 9.808034] ieee80211_crypt: registered algorithm 'NULL'
[ 9.816008] initcall ieee80211_crypto_init+0x0/0x20 returned 0 after 7812 usecs
[ 9.820005] calling ieee80211_crypto_wep_init+0x0/0x20 @ 1
[ 9.828008] ieee80211_crypt: registered algorithm 'WEP'
[ 9.832006] initcall ieee80211_crypto_wep_init+0x0/0x20 returned 0 after 3906 usecs
[ 9.840008] calling ieee80211_crypto_tkip_init+0x0/0x20 @ 1
[ 9.844007] ieee80211_crypt: registered algorithm 'TKIP'
[ 9.852008] initcall ieee80211_crypto_tkip_init+0x0/0x20 returned 0 after 7812 usecs
[ 9.860007] calling tipc_init+0x0/0xd0 @ 1
[ 9.864039] TIPC: Activated (version 1.6.4 compiled Oct 23 2008 16:24:21)
[ 9.873619] NET: Registered protocol family 30
[ 9.876029] TIPC: Started in single node mode
[ 9.880008] initcall tipc_init+0x0/0xd0 returned 0 after 15625 usecs
[ 9.888009] calling update_mp_table+0x0/0x520 @ 1
[ 9.892014] initcall update_mp_table+0x0/0x520 returned 0 after 0 usecs
[ 9.900007] calling lapic_insert_resource+0x0/0x50 @ 1
[ 9.904009] initcall lapic_insert_resource+0x0/0x50 returned 0 after 0 usecs
[ 9.912007] calling ioapic_insert_resources+0x0/0x60 @ 1
[ 9.916007] initcall ioapic_insert_resources+0x0/0x60 returned 0 after 0 usecs
[ 9.924007] calling io_apic_bug_finalize+0x0/0x20 @ 1
[ 9.928006] initcall io_apic_bug_finalize+0x0/0x20 returned 0 after 0 usecs
[ 9.936008] calling check_early_ioremap_leak+0x0/0x70 @ 1
[ 9.940006] initcall check_early_ioremap_leak+0x0/0x70 returned 0 after 0 usecs
[ 9.948007] calling pat_memtype_list_init+0x0/0x30 @ 1
[ 9.952034] initcall pat_memtype_list_init+0x0/0x30 returned 0 after 0 usecs
[ 9.960008] calling sched_init_debug+0x0/0x30 @ 1
[ 9.964025] initcall sched_init_debug+0x0/0x30 returned 0 after 0 usecs
[ 9.972009] calling init_oops_id+0x0/0x30 @ 1
[ 9.976013] initcall init_oops_id+0x0/0x30 returned 0 after 0 usecs
[ 9.980007] calling disable_boot_consoles+0x0/0x40 @ 1
[ 9.988008] initcall disable_boot_consoles+0x0/0x40 returned 0 after 0 usecs
[ 9.996008] calling pm_qos_power_init+0x0/0x90 @ 1
[ 10.001969] initcall pm_qos_power_init+0x0/0x90 returned 0 after 0 usecs
[ 10.004039] calling debugfs_kprobe_init+0x0/0x90 @ 1
[ 10.008071] initcall debugfs_kprobe_init+0x0/0x90 returned 0 after 0 usecs
[ 10.012007] calling fail_make_request_debugfs+0x0/0x20 @ 1
[ 10.016145] initcall fail_make_request_debugfs+0x0/0x20 returned 0 after 0 usecs
[ 10.020006] calling fail_io_timeout_debugfs+0x0/0x20 @ 1
[ 10.024144] initcall fail_io_timeout_debugfs+0x0/0x20 returned 0 after 0 usecs
[ 10.028009] calling random32_reseed+0x0/0xb0 @ 1
[ 10.032027] initcall random32_reseed+0x0/0xb0 returned 0 after 0 usecs
[ 10.036015] calling pci_sysfs_init+0x0/0x60 @ 1
[ 10.040527] initcall pci_sysfs_init+0x0/0x60 returned 0 after 0 usecs
[ 10.044006] calling seqgen_init+0x0/0x10 @ 1
[ 10.048024] initcall seqgen_init+0x0/0x10 returned 0 after 0 usecs
[ 10.052005] calling hd_init+0x0/0x350 @ 1
[ 10.056101] hd: no drives specified - use hd=cyl,head,sectors on kernel command line
[ 10.060419] initcall hd_init+0x0/0x350 returned -1 after 3906 usecs
[ 10.064005] initcall hd_init+0x0/0x350 returned with error code -1
[ 10.068007] calling scsi_complete_async_scans+0x0/0x110 @ 1
[ 10.072006] initcall scsi_complete_async_scans+0x0/0x110 returned 0 after 0 usecs
[ 10.076005] calling memmap_init+0x0/0xb0 @ 1
[ 10.080183] initcall memmap_init+0x0/0xb0 returned 0 after 0 usecs
[ 10.084006] calling tcp_congestion_default+0x0/0x20 @ 1
[ 10.088007] initcall tcp_congestion_default+0x0/0x20 returned 0 after 0 usecs
[ 10.092005] calling ip_auto_config+0x0/0xf80 @ 1
[ 10.096025] initcall ip_auto_config+0x0/0xf80 returned 0 after 0 usecs
[ 10.100189] md: Waiting for all devices to be available before autodetect
[ 10.104005] md: If you don't use raid, use raid=noautodetect
[ 10.113134] md: Autodetecting RAID arrays.
[ 10.116006] md: Scanned 0 and added 0 devices.
[ 10.120006] md: autorun ...
[ 10.124004] md: ... autorun DONE.
[ 10.140491] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 10.144017] EXT3-fs: write access will be enabled during recovery.
[ 10.170398] kjournald starting. Commit interval 5 seconds
[ 10.172225] EXT3-fs: recovery complete.
[ 10.180877] EXT3-fs: mounted filesystem with ordered data mode.
[ 10.184336] VFS: Mounted root (ext3 filesystem) readonly.
[ 10.192086] debug: unmapping init memory ffffffff81644000..ffffffff81850000
[ 10.196247] Write protecting the kernel read-only data: 2888k
[ 10.204290] Testing CPA: undo ffffffff807e2000-ffffffff80ab4000
[ 10.208160] Testing CPA: again
[ 10.482334] SELinux: Disabled at runtime.
[ 10.484007] SELinux: Unregistering netfilter hooks
[ 10.548034] type=1404 audit(1224773435.548:2): selinux=0 auid=4294967295 ses=4294967295
[ 13.239555] udev: renamed network interface eth0 to eth1
[ 13.256430] udev: renamed network interface eth1_rename to eth0
[ 14.370522] eth0: link down
[ 21.557656] EXT3 FS on sda6, internal journal
[ 21.683374] kjournald starting. Commit interval 5 seconds
[ 21.688302] EXT3 FS on sda5, internal journal
[ 21.692016] EXT3-fs: mounted filesystem with ordered data mode.
[ 25.073543] warning: `sudo' uses 32-bit capabilities (legacy support in use)
[ 32.732022] CPA self-test:
[ 32.746184] 4k 262128 large 0 gb 0 x 262128[ffff880000000000-ffff88003ffef000] miss 0
[ 32.770375] 4k 262128 large 0 gb 0 x 262128[ffff880000000000-ffff88003ffef000] miss 0
[ 32.793581] 4k 262128 large 0 gb 0 x 262128[ffff880000000000-ffff88003ffef000] miss 0
[ 32.796004] ok.
next prev parent reply other threads:[~2008-10-23 14:33 UTC|newest]
Thread overview: 78+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-10-23 2:08 [PATCH 00/35] cpumask: Replace cpumask_t with struct cpumask Mike Travis
2008-10-23 2:08 ` [PATCH 01/35] cpumask: add for_each_cpu_mask_and function Mike Travis
2008-10-23 2:08 ` [PATCH 02/35] x86 smp: modify send_IPI_mask interface to accept cpumask_t pointers Mike Travis
2008-10-23 2:08 ` [PATCH 03/35] sched: Reduce stack size requirements in kernel/sched.c Mike Travis
2008-10-23 2:08 ` [PATCH 04/35] cpumask: centralize cpu_online_map and cpu_possible_map Mike Travis
2008-10-23 2:14 ` [PATCH 04/35] cpumask: centralize cpu_online_map and cpu_possible_map - resubmit Mike Travis
2008-10-23 2:08 ` [PATCH 05/35] cpumask: remove min from first_cpu/next_cpu From: Rusty Russell <rusty@rustcorp.com.au> Mike Travis
2008-10-23 2:08 ` [PATCH 06/35] cpumask: introduce struct cpumask. " Mike Travis
2008-10-23 2:08 ` [PATCH 07/35] cpumask: change cpumask/list_scnprintf, cpumask/list_parse to take pointers. " Mike Travis
2008-10-23 2:08 ` [PATCH 08/35] cpumask: cpumask_size() From: Mike Travis <travis@sgi.com> Mike Travis
2008-10-23 2:08 ` [PATCH 09/35] cpumask: add cpumask_copy() Mike Travis
2008-10-23 2:08 ` [PATCH 10/35] cpumask: introduce cpumask_var_t for local cpumask vars From: Rusty Russell <rusty@rustcorp.com.au> Mike Travis
2008-10-23 2:08 ` [PATCH 11/35] x86: enable MAXSMP Mike Travis
2008-10-23 2:08 ` [PATCH 12/35] cpumask: make CONFIG_NR_CPUS always valid. From: Rusty Russell <rusty@rustcorp.com.au> Mike Travis
2008-10-23 2:08 ` [PATCH 13/35] cpumask: make nr_cpu_ids valid in all configurations. " Mike Travis
2008-10-23 2:08 ` [PATCH 14/35] cpumask: add nr_cpumask_bits Mike Travis
2008-10-23 2:08 ` [PATCH 15/35] cpumask: prepare for iterators to only go to nr_cpu_ids/nr_cpumask_bits. From: Rusty Russell <rusty@rustcorp.com.au> Mike Travis
2008-10-23 2:08 ` [PATCH 16/35] percpu: fix percpu accessors to potentially !cpu_possible() cpus " Mike Travis
2008-10-23 2:08 ` [PATCH 17/35] cpumask: make nr_cpu_ids the actual limit on bitmap size Mike Travis
2008-10-23 2:08 ` [PATCH 18/35] cpumask: use cpumask_bits() everywhere Mike Travis
2008-10-23 2:16 ` [PATCH 18/35] cpumask: use cpumask_bits() everywhere.-resubmit Mike Travis
2008-10-23 2:08 ` [PATCH 19/35] cpumask: cpumask_of(): cpumask_of_cpu() which returns a pointer. From: Rusty Russell <rusty@rustcorp.com.au> Mike Travis
2008-10-23 2:08 ` [PATCH 20/35] cpumask: for_each_cpu(): for_each_cpu_mask which takes a pointer " Mike Travis
2008-10-23 2:08 ` [PATCH 21/35] cpumask: cpumask_first/cpumask_next " Mike Travis
2008-10-23 2:08 ` [PATCH 22/35] cpumask: deprecate any_online_cpu() in favour of cpumask_any/cpumask_any_and " Mike Travis
2008-10-23 10:25 ` Ingo Molnar
2008-10-23 10:43 ` Ingo Molnar
2008-10-23 12:57 ` Mike Travis
2008-10-23 2:08 ` [PATCH 23/35] cpumask: cpumask_any_but() " Mike Travis
2008-10-23 11:00 ` Ingo Molnar
2008-10-23 2:08 ` [PATCH 24/35] cpumask: Deprecate CPUMASK_ALLOC etc in favor of cpumask_var_t. " Mike Travis
2008-10-23 2:08 ` [PATCH 25/35] cpumask: get rid of boutique sched.c allocations, use " Mike Travis
2008-10-23 2:08 ` [PATCH 26/35] cpumask: to_cpumask() " Mike Travis
2008-10-23 2:08 ` [PATCH 27/35] cpumask: accessors to manipulate possible/present/online/active maps " Mike Travis
2008-10-23 11:05 ` Ingo Molnar
2008-10-23 13:52 ` Mike Travis
2008-10-23 2:08 ` [PATCH 28/35] cpumask: CONFIG_BITS_ALL, CONFIG_BITS_NONE and CONFIG_BITS_CPU0 " Mike Travis
2008-10-23 2:08 ` [PATCH 29/35] cpumask: switch over to cpu_online/possible/active/present_mask " Mike Travis
2008-10-30 17:36 ` Tony Luck
2008-10-23 2:08 ` [PATCH 30/35] cpumask: cpu_all_mask and cpu_none_mask. " Mike Travis
2008-10-23 2:08 ` [PATCH 31/35] cpumask: reorder header to minimize separate #ifdefs " Mike Travis
2008-10-23 2:08 ` [PATCH 32/35] cpumask: debug options for cpumasks " Mike Travis
2008-10-23 2:08 ` [PATCH 33/35] cpumask: smp_call_function_many() " Mike Travis
2008-10-23 2:09 ` [PATCH 34/35] cpumask: Use accessors code. " Mike Travis
2008-10-23 5:34 ` Rusty Russell
2008-10-23 2:09 ` [PATCH 35/35] x86: clean up speedctep-centrino and reduce cpumask_t usage " Mike Travis
2008-10-23 5:36 ` Rusty Russell
2008-10-23 12:04 ` Ingo Molnar
2008-10-23 15:06 ` Rusty Russell
2008-10-23 15:10 ` Dave Jones
2008-10-27 16:23 ` Ingo Molnar
2008-10-23 12:03 ` [PATCH 00/35] cpumask: Replace cpumask_t with struct cpumask Ingo Molnar
2008-10-23 12:54 ` Mike Travis
2008-10-23 13:01 ` Ingo Molnar
2008-10-23 13:38 ` Mike Travis
2008-10-23 12:55 ` [bug] " Ingo Molnar
2008-10-23 12:57 ` Ingo Molnar
2008-10-23 13:00 ` Mike Travis
2008-10-23 14:20 ` [bug #2] " Ingo Molnar
2008-10-23 14:21 ` Ingo Molnar
2008-10-23 15:01 ` Rusty Russell
2008-10-23 15:20 ` Mike Travis
2008-10-23 16:09 ` Ingo Molnar
2008-10-23 22:29 ` Rusty Russell
2008-10-23 16:06 ` Ingo Molnar
2008-10-23 16:18 ` Mike Travis
2008-10-23 16:35 ` Ingo Molnar
2008-10-23 16:50 ` Mike Travis
2008-10-23 16:52 ` Ingo Molnar
2008-10-23 17:06 ` Mike Travis
2008-10-23 20:20 ` [PATCH 1/1]: cpumask: fix compiler errors/warnings Mike Travis
2008-10-23 14:22 ` [bug] Re: [PATCH 00/35] cpumask: Replace cpumask_t with struct cpumask Mike Travis
2008-10-23 14:24 ` Ingo Molnar
2008-10-23 14:28 ` Ingo Molnar
2008-10-23 14:32 ` Ingo Molnar [this message]
2008-10-23 23:01 ` Rusty Russell
2008-10-23 22:53 ` Rusty Russell
2008-10-27 16:20 ` Ingo Molnar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20081023143213.GA24830@elte.hu \
--to=mingo@elte.hu \
--cc=akpm@linux-foundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=rusty@rustcorp.com.au \
--cc=travis@sgi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.