From: David Gibson <david@gibson.dropbear.id.au>
To: benh@yookeroo.seuss, Paul Mackerras <paulus@samba.org>
Cc: linuxppc-dev@ozlabs.org
Subject: powerpc: udbg based backend for hvc_console
Date: Fri, 24 Oct 2008 14:54:34 +1100 [thread overview]
Message-ID: <20081024035434.GF4267@yookeroo.seuss> (raw)
This patch adds a new backend for the hvc console based on the
low-level udbg callbacks. This effectively implements a working
runtime console in terms of the simple udbg primitives. This is kind
of a hack - since udbg isn't something you really want to be using
routinely - but it's really useful during bringup.
This can be used to quickly implement a userspace usable console while
you're working on a proper driver for whatever console I/O device the
hardware has. Or, it can be used to avoid writing a full blown
tty/console driver entirely for quick-and-dirty I/O hardware that will
later be replaced by something else.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Index: working-2.6/drivers/char/Kconfig
===================================================================
--- working-2.6.orig/drivers/char/Kconfig 2008-10-22 16:01:39.000000000 +1100
+++ working-2.6/drivers/char/Kconfig 2008-10-24 14:22:59.000000000 +1100
@@ -631,6 +631,12 @@ config HVC_XEN
help
Xen virtual console device driver
+config HVC_UDBG
+ bool "udbg based fake hypervisor console"
+ depends on EXPERIMENTAL
+ select HVC_DRIVER
+ default n
+
config VIRTIO_CONSOLE
tristate "Virtio console"
depends on VIRTIO
Index: working-2.6/drivers/char/Makefile
===================================================================
--- working-2.6.orig/drivers/char/Makefile 2008-10-22 15:50:59.000000000 +1100
+++ working-2.6/drivers/char/Makefile 2008-10-24 14:22:59.000000000 +1100
@@ -50,6 +50,7 @@ obj-$(CONFIG_HVC_BEAT) += hvc_beat.o
obj-$(CONFIG_HVC_DRIVER) += hvc_console.o
obj-$(CONFIG_HVC_IRQ) += hvc_irq.o
obj-$(CONFIG_HVC_XEN) += hvc_xen.o
+obj-$(CONFIG_HVC_UDBG) += hvc_udbg.o
obj-$(CONFIG_VIRTIO_CONSOLE) += virtio_console.o
obj-$(CONFIG_RAW_DRIVER) += raw.o
obj-$(CONFIG_SGI_SNSC) += snsc.o snsc_event.o
Index: working-2.6/drivers/char/hvc_udbg.c
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ working-2.6/drivers/char/hvc_udbg.c 2008-10-24 14:38:55.000000000 +1100
@@ -0,0 +1,96 @@
+/*
+ * udbg interface to hvc_console.c
+ *
+ * (C) Copyright David Gibson, IBM Corporation 2008.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+#include <linux/irq.h>
+
+#include <asm/udbg.h>
+
+#include "hvc_console.h"
+
+struct hvc_struct *hvc_udbg_dev;
+
+static int hvc_udbg_put(uint32_t vtermno, const char *buf, int count)
+{
+ int i;
+
+ for (i = 0; i < count; i++)
+ udbg_putc(buf[i]);
+
+ return i;
+}
+
+static int hvc_udbg_get(uint32_t vtermno, char *buf, int count)
+{
+ int i, c;
+
+ if (!udbg_getc_poll)
+ return 0;
+
+ for (i = 0; i < count; i++) {
+ if ((c = udbg_getc_poll()) == -1)
+ break;
+ buf[i] = c;
+ }
+
+ return i;
+}
+
+static struct hv_ops hvc_udbg_ops = {
+ .get_chars = hvc_udbg_get,
+ .put_chars = hvc_udbg_put,
+};
+
+static int __init hvc_udbg_init(void)
+{
+ struct hvc_struct *hp;
+
+ BUG_ON(hvc_udbg_dev);
+
+ hp = hvc_alloc(0, NO_IRQ, &hvc_udbg_ops, 16);
+ if (IS_ERR(hp))
+ return PTR_ERR(hp);
+
+ hvc_udbg_dev = hp;
+
+ return 0;
+}
+module_init(hvc_udbg_init);
+
+static void __exit hvc_udbg_exit(void)
+{
+ if (hvc_udbg_dev)
+ hvc_remove(hvc_udbg_dev);
+}
+module_exit(hvc_udbg_exit);
+
+static int __init hvc_udbg_console_init(void)
+{
+ hvc_instantiate(0, 0, &hvc_udbg_ops);
+ add_preferred_console("hvc", 0, NULL);
+
+ return 0;
+}
+console_initcall(hvc_udbg_console_init);
--
David Gibson | I'll have my music baroque, and my code
david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_
| _way_ _around_!
http://www.ozlabs.org/~dgibson
next reply other threads:[~2008-10-24 3:54 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-10-24 3:54 David Gibson [this message]
2008-11-05 4:53 ` powerpc: udbg based backend for hvc_console Paul Mackerras
2008-11-06 0:20 ` David Gibson
2008-11-17 19:41 ` Timur Tabi
2008-11-18 0:28 ` David Gibson
2008-11-17 20:04 ` Timur Tabi
2008-11-18 0:40 ` David Gibson
2008-11-18 4:42 ` Timur Tabi
2008-11-18 5:14 ` David Gibson
2008-11-18 15:06 ` Timur Tabi
2008-11-19 0:42 ` David Gibson
2008-11-19 15:20 ` Timur Tabi
2008-11-20 19:07 ` Milton Miller
2008-11-20 19:16 ` Timur Tabi
2008-11-21 0:23 ` David Gibson
2008-11-21 15:57 ` Milton Miller
2008-11-21 16:13 ` Timur Tabi
2008-11-21 19:09 ` Milton Miller
2008-11-21 0:35 ` David Gibson
2008-11-21 19:29 ` Milton Miller
2008-11-17 20:18 ` Timur Tabi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20081024035434.GF4267@yookeroo.seuss \
--to=david@gibson.dropbear.id.au \
--cc=benh@yookeroo.seuss \
--cc=linuxppc-dev@ozlabs.org \
--cc=paulus@samba.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.