All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jeff Garzik <jeff@garzik.org>
To: David Miller <davem@davemloft.net>
Cc: netdev@vger.kernel.org, LKML <linux-kernel@vger.kernel.org>
Subject: [git patches] net driver fixes for 2.6.28-rc
Date: Mon, 3 Nov 2008 15:51:22 -0500	[thread overview]
Message-ID: <20081103205121.GA6005@havoc.gtf.org> (raw)


Please pull from 'davem-fixes' branch of
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6.git davem-fixes

to receive the following updates:

 drivers/net/Kconfig                |   18 +++++++++++++++---
 drivers/net/fs_enet/fs_enet-main.c |    6 ++++--
 drivers/net/mv643xx_eth.c          |    9 ++++++---
 3 files changed, 25 insertions(+), 8 deletions(-)

Alexey Dobriyan (1):
      fs_enet: fix polling

Jeff Kirsher (1):
      net: kconfig cleanup

Lennert Buytenhek (1):
      mv643xx_eth: fix SMI bus access timeouts

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index f749b40..11f143f 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -2010,9 +2010,13 @@ config IGB_LRO
 	  If in doubt, say N.
 
 config IGB_DCA
-	bool "Enable DCA"
+	bool "Direct Cache Access (DCA) Support"
 	default y
 	depends on IGB && DCA && !(IGB=y && DCA=m)
+	---help---
+	  Say Y here if you want to use Direct Cache Access (DCA) in the
+	  driver.  DCA is a method for warming the CPU cache before data
+	  is used, with the intent of lessening the impact of cache misses.
 
 source "drivers/net/ixp2000/Kconfig"
 
@@ -2437,9 +2441,13 @@ config IXGBE
 	  will be called ixgbe.
 
 config IXGBE_DCA
-	bool
+	bool "Direct Cache Access (DCA) Support"
 	default y
 	depends on IXGBE && DCA && !(IXGBE=y && DCA=m)
+	---help---
+	  Say Y here if you want to use Direct Cache Access (DCA) in the
+	  driver.  DCA is a method for warming the CPU cache before data
+	  is used, with the intent of lessening the impact of cache misses.
 
 config IXGB
 	tristate "Intel(R) PRO/10GbE support"
@@ -2489,9 +2497,13 @@ config MYRI10GE
 	  will be called myri10ge.
 
 config MYRI10GE_DCA
-	bool
+	bool "Direct Cache Access (DCA) Support"
 	default y
 	depends on MYRI10GE && DCA && !(MYRI10GE=y && DCA=m)
+	---help---
+	  Say Y here if you want to use Direct Cache Access (DCA) in the
+	  driver.  DCA is a method for warming the CPU cache before data
+	  is used, with the intent of lessening the impact of cache misses.
 
 config NETXEN_NIC
 	tristate "NetXen Multi port (1/10) Gigabit Ethernet NIC"
diff --git a/drivers/net/fs_enet/fs_enet-main.c b/drivers/net/fs_enet/fs_enet-main.c
index cb51c1f..a6f49d0 100644
--- a/drivers/net/fs_enet/fs_enet-main.c
+++ b/drivers/net/fs_enet/fs_enet-main.c
@@ -1099,7 +1099,9 @@ static int __devinit fs_enet_probe(struct of_device *ofdev,
 	ndev->stop = fs_enet_close;
 	ndev->get_stats = fs_enet_get_stats;
 	ndev->set_multicast_list = fs_set_multicast_list;
-
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	ndev->poll_controller = fs_enet_netpoll;
+#endif
 	if (fpi->use_napi)
 		netif_napi_add(ndev, &fep->napi, fs_enet_rx_napi,
 		               fpi->napi_weight);
@@ -1209,7 +1211,7 @@ static void __exit fs_cleanup(void)
 static void fs_enet_netpoll(struct net_device *dev)
 {
        disable_irq(dev->irq);
-       fs_enet_interrupt(dev->irq, dev, NULL);
+       fs_enet_interrupt(dev->irq, dev);
        enable_irq(dev->irq);
 }
 #endif
diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c
index a9c8c08..b9dcdbd 100644
--- a/drivers/net/mv643xx_eth.c
+++ b/drivers/net/mv643xx_eth.c
@@ -1066,9 +1066,12 @@ static int smi_wait_ready(struct mv643xx_eth_shared_private *msp)
 		return 0;
 	}
 
-	if (!wait_event_timeout(msp->smi_busy_wait, smi_is_done(msp),
-				msecs_to_jiffies(100)))
-		return -ETIMEDOUT;
+	if (!smi_is_done(msp)) {
+		wait_event_timeout(msp->smi_busy_wait, smi_is_done(msp),
+				   msecs_to_jiffies(100));
+		if (!smi_is_done(msp))
+			return -ETIMEDOUT;
+	}
 
 	return 0;
 }

             reply	other threads:[~2008-11-03 20:51 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-11-03 20:51 Jeff Garzik [this message]
2008-11-03 21:28 ` [git patches] net driver fixes for 2.6.28-rc David Miller
2008-11-03 22:07 ` Marcel Holtmann
2008-11-03 22:54   ` David Miller
2008-11-03 22:59   ` Jeff Garzik
  -- strict thread matches above, loose matches on Subject: below --
2008-11-14 23:25 Jeff Garzik
2008-11-14 23:48 ` David Miller
2008-11-11  8:58 Jeff Garzik
2008-11-12  0:42 ` David Miller
2008-11-06  6:50 Jeff Garzik
2008-11-06 23:50 ` David Miller
2008-11-04  7:51 Jonathan McDowell
2008-11-04  8:27 ` Marcel Holtmann
2008-11-06  5:42 ` Jeff Garzik
2008-10-31  5:09 Jeff Garzik
2008-10-31  6:52 ` David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20081103205121.GA6005@havoc.gtf.org \
    --to=jeff@garzik.org \
    --cc=davem@davemloft.net \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.