From: Theodore Tso <tytso@mit.edu>
To: Yinghai Lu <yinghai@kernel.org>
Cc: linux-kernel@vger.kernel.org, Thomas Gleixner <tglx@linutronix.de>
Subject: Re: 2.6.28-rc2: REGRESSION in early boot
Date: Thu, 6 Nov 2008 00:23:40 -0500 [thread overview]
Message-ID: <20081106052340.GA12762@mit.edu> (raw)
In-Reply-To: <86802c440811050922o53f494c6y7b007f094a6ece2e@mail.gmail.com>
[-- Attachment #1: Type: text/plain, Size: 778 bytes --]
On Wed, Nov 05, 2008 at 09:22:38AM -0800, Yinghai Lu wrote:
> > What is your theory for why this was causing a failure in the timer
> > subsystem? Were we overrunning the end of irq_desc array and stomping
> > on some other data structure?
>
> Yes. Please do apply that two patches at first.
>
Success! Applying these two patches, as found at:
http://lkml.org/lkml/2008/11/4/431
http://lkml.org/lkml/2008/11/5/81
... and my 2.6.28-rc3-git2 based kernel successfully booted on my
system.
I'll update: http://bugzilla.kernel.org/show_bug.cgi?id=11951
accordingly. Are these two patches scheduled to be pushed to
mainstream, hopefully ASAP since they are a regression fix?
- Ted
P.S. I've attached the dmesg of the patched 2.6.28-rc3-git2 kernel.
[-- Attachment #2: dmesg --]
[-- Type: text/plain, Size: 51815 bytes --]
[ 0.000000] BIOS EBDA/lowmem at: 0009b400/0009b400
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Linux version 2.6.28-rc3-00123-g72a0780 (root@closure) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #97 SMP Wed Nov 5 22:59:25 EST 2008
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009b400 (usable)
[ 0.000000] BIOS-e820: 000000000009b400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cff70000 (usable)
[ 0.000000] BIOS-e820: 00000000cff70000 - 00000000cff78000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cff78000 - 00000000cff80000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cff80000 - 00000000d0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
[ 0.000000] DMI present.
[ 0.000000] last_pfn = 0x130000 max_arch_pfn = 0x1000000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] kernel direct mapping tables up to 379fe000 @ 7000-d000
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] RAMDISK: 3792a000 - 37fef6ae
[ 0.000000] Allocated new RAMDISK: 00cb3000 - 013786ae
[ 0.000000] Move RAMDISK from 000000003792a000 - 0000000037fef6ad to 00cb3000 - 013786ad
[ 0.000000] ACPI: RSDP 000F6860, 0014 (r0 PTLTD )
[ 0.000000] ACPI: RSDT CFF72D76, 003C (r1 PTLTD RSDT 6040000 LTP 0)
[ 0.000000] ACPI: FACP CFF77E20, 0074 (r1 INTEL LINDHRST 6040000 PTL 3)
[ 0.000000] ACPI: DSDT CFF731CC, 4C54 (r1 Intel LINDHRST 6040000 MSFT 100000E)
[ 0.000000] ACPI: FACS CFF78FC0, 0040
[ 0.000000] ACPI: APIC CFF77E94, 00B4 (r1 PTLTD APIC 6040000 LTP 0)
[ 0.000000] ACPI: BOOT CFF77F48, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
[ 0.000000] ACPI: SPCR CFF77F70, 0050 (r1 PTLTD $UCRTBL$ 6040000 PTL 1)
[ 0.000000] ACPI: MCFG CFF77FC0, 0040 (r1 PTLTD MCFG 6040000 LTP 0)
[ 0.000000] ACPI: SSDT CFF72DB2, 041A (r1 PmRef CpuPm 3000 INTL 20030224)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 3974MB HIGHMEM available.
[ 0.000000] 889MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 379fe000
[ 0.000000] low ram: 00000000 - 379fe000
[ 0.000000] bootmap 0000a000 - 00010f40
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00379fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 0000ca725c] TEXT DATA BSS ==> [0000100000 - 0000ca725c]
[ 0.000000] #4 [0000ca8000 - 0000cb3000] INIT_PG_TABLE ==> [0000ca8000 - 0000cb3000]
[ 0.000000] #5 [000009b400 - 0000100000] BIOS reserved ==> [000009b400 - 0000100000]
[ 0.000000] #6 [0000007000 - 000000a000] PGTABLE ==> [0000007000 - 000000a000]
[ 0.000000] #7 [0000cb3000 - 00013786ae] NEW RAMDISK ==> [0000cb3000 - 00013786ae]
[ 0.000000] #8 [000000a000 - 0000011000] BOOTMAP ==> [000000a000 - 0000011000]
[ 0.000000] found SMP MP-table at [c00f6800] 000f6800
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000379fe
[ 0.000000] HighMem 0x000379fe -> 0x00130000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009b
[ 0.000000] 0: 0x00000100 -> 0x000cff70
[ 0.000000] 0: 0x00100000 -> 0x00130000
[ 0.000000] On node 0 totalpages: 1048331
[ 0.000000] free_area_init_node: node 0, pgdat c06a7e80, node_mem_map c1379000
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3939 pages, LIFO batch:0
[ 0.000000] Normal zone: 3059 pages used for memmap
[ 0.000000] Normal zone: 220683 pages, LIFO batch:31
[ 0.000000] HighMem zone: 13910 pages used for memmap
[ 0.000000] HighMem zone: 806684 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfec80000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 3, version 32, address 0xfec80000, GSI 24-47
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec80400] gsi_base[48])
[ 0.000000] IOAPIC[2]: apic_id 4, version 32, address 0xfec80400, GSI 48-71
[ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfec84000] gsi_base[72])
[ 0.000000] IOAPIC[3]: apic_id 5, version 32, address 0xfec84000, GSI 72-95
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec84400] gsi_base[96])
[ 0.000000] IOAPIC[4]: apic_id 8, version 32, address 0xfec84400, GSI 96-119
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 5 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] ------------[ cut here ]------------
[ 0.000000] WARNING: at arch/x86/kernel/io_apic.c:3614 probe_nr_irqs+0x44/0x4d()
[ 0.000000] Modules linked in:
[ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.28-rc3-00123-g72a0780 #97
[ 0.000000] Call Trace:
[ 0.000000] [<c01418f1>] warn_on_slowpath+0x46/0x60
[ 0.000000] [<c0160a3e>] ? __lock_acquire+0x3d9/0xa5b
[ 0.000000] [<c06dd463>] ? alloc_bootmem_core+0x1bf/0x221
[ 0.000000] [<c012db8b>] ? native_pmd_val+0x8/0xa
[ 0.000000] [<c01324a2>] ? pmd_val+0x11/0x21
[ 0.000000] [<c011bb31>] ? sched_clock+0xc/0x1c
[ 0.000000] [<c015e5fb>] ? lock_release_holdtime+0x43/0x48
[ 0.000000] [<c016142c>] ? lock_release+0x14c/0x155
[ 0.000000] [<c015e46b>] ? trace_hardirqs_off_caller+0x79/0x84
[ 0.000000] [<c04ab040>] ? _spin_unlock_irqrestore+0x3e/0x55
[ 0.000000] [<c015e5b6>] ? trace_hardirqs_off+0xb/0xd
[ 0.000000] [<c04ab040>] ? _spin_unlock_irqrestore+0x3e/0x55
[ 0.000000] [<c06d5853>] probe_nr_irqs+0x44/0x4d
[ 0.000000] [<c06cbfe8>] setup_arch+0xa90/0xb00
[ 0.000000] [<c015e46b>] ? trace_hardirqs_off_caller+0x79/0x84
[ 0.000000] [<c015e5b6>] ? trace_hardirqs_off+0xb/0xd
[ 0.000000] [<c015e91a>] ? lockdep_init_map+0x6b/0xc7
[ 0.000000] [<c06c65e2>] start_kernel+0x85/0x30e
[ 0.000000] [<c06c6080>] __init_begin+0x80/0x88
[ 0.000000] ---[ end trace 8305b6ae03c24dde ]---
[ 0.000000] PM: Registered nosave memory: 000000000009b000 - 000000000009c000
[ 0.000000] PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at d1000000 (gap: d0000000:10000000)
[ 0.000000] PERCPU: Allocating 1216512 bytes of per cpu data
[ 0.000000] NR_CPUS: 8, nr_cpu_ids: 4, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1031306
[ 0.000000] Kernel command line: root=UUID=051dd1fd-28e9-4b92-b970-03406cf78bf3 ro quiet splash
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] CPU 0 irqstacks, hard=c084f000 soft=c0847000
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2992.467 MHz processor.
[ 0.003333] Console: colour VGA+ 80x25
[ 0.003333] console [tty0] enabled
[ 0.003333] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.003333] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.003333] ... MAX_LOCK_DEPTH: 48
[ 0.003333] ... MAX_LOCKDEP_KEYS: 8191
[ 0.003333] ... CLASSHASH_SIZE: 4096
[ 0.003333] ... MAX_LOCKDEP_ENTRIES: 8192
[ 0.003333] ... MAX_LOCKDEP_CHAINS: 16384
[ 0.003333] ... CHAINHASH_SIZE: 8192
[ 0.003333] memory used by lock dependency info: 2463 kB
[ 0.003333] per task-struct memory footprint: 1920 bytes
[ 0.003333] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.003333] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.003333] Memory: 4099644k/4980736k available (3770k kernel code, 92804k reserved, 2121k data, 1528k init, 3282376k highmem)
[ 0.003333] virtual kernel memory layout:
[ 0.003333] fixmap : 0xfff50000 - 0xfffff000 ( 700 kB)
[ 0.003333] pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
[ 0.003333] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB)
[ 0.003333] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB)
[ 0.003333] .init : 0xc06c6000 - 0xc0844000 (1528 kB)
[ 0.003333] .data : 0xc04aeb44 - 0xc06c10c4 (2121 kB)
[ 0.003333] .text : 0xc0100000 - 0xc04aeb44 (3770 kB)
[ 0.003333] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.003333] SLUB: Genslabs=12, HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.003350] Calibrating delay loop (skipped), value calculated using timer frequency.. 5987.30 BogoMIPS (lpj=9974890)
[ 0.003383] Security Framework initialized
[ 0.003398] SELinux: Disabled at boot.
[ 0.003418] Mount-cache hash table entries: 512
[ 0.003736] Initializing cgroup subsys debug
[ 0.003742] Initializing cgroup subsys ns
[ 0.003747] Initializing cgroup subsys cpuacct
[ 0.003753] Initializing cgroup subsys devices
[ 0.003756] Initializing cgroup subsys freezer
[ 0.003780] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 0.003785] CPU: L2 cache: 2048K
[ 0.003789] CPU: Physical Processor ID: 0
[ 0.003792] CPU: Processor Core ID: 0
[ 0.003796] Intel machine check architecture supported.
[ 0.003804] Intel machine check reporting enabled on CPU#0.
[ 0.003808] CPU0: Intel P4/Xeon Extended MCE MSRs (24) available
[ 0.003812] using mwait in idle threads.
[ 0.003833] Checking 'hlt' instruction... OK.
[ 0.018444] ACPI: Core revision 20080926
[ 0.030008] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.030016] ftrace: allocating 23328 entries in 91 pages
[ 0.034024] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.067858] CPU0: Intel(R) Xeon(TM) CPU 3.00GHz stepping 03
[ 0.069998] lockdep: fixing up alternatives.
[ 0.069998] CPU 1 irqstacks, hard=c0850000 soft=c0848000
[ 0.069998] Booting processor 1 APIC 0x6 ip 0x6000
[ 0.003333] Initializing CPU#1
[ 0.003333] Calibrating delay using timer specific routine.. 6055.16 BogoMIPS (lpj=10088261)
[ 0.003333] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 0.003333] CPU: L2 cache: 2048K
[ 0.003333] CPU: Physical Processor ID: 3
[ 0.003333] CPU: Processor Core ID: 0
[ 0.003333] Intel machine check architecture supported.
[ 0.003333] Intel machine check reporting enabled on CPU#1.
[ 0.003333] CPU1: Intel P4/Xeon Extended MCE MSRs (24) available
[ 0.003333] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.161229] CPU1: Intel(R) Xeon(TM) CPU 3.00GHz stepping 03
[ 0.161244] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.163495] lockdep: fixing up alternatives.
[ 0.163518] CPU 2 irqstacks, hard=c0851000 soft=c0849000
[ 0.163522] Booting processor 2 APIC 0x1 ip 0x6000
[ 0.003333] Initializing CPU#2
[ 0.003333] Calibrating delay using timer specific routine.. 5987.97 BogoMIPS (lpj=9974362)
[ 0.003333] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 0.003333] CPU: L2 cache: 2048K
[ 0.003333] CPU: Physical Processor ID: 0
[ 0.003333] CPU: Processor Core ID: 0
[ 0.003333] Intel machine check architecture supported.
[ 0.003333] Intel machine check reporting enabled on CPU#2.
[ 0.003333] CPU2: Intel P4/Xeon Extended MCE MSRs (24) available
[ 0.003333] x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106
[ 0.257984] CPU2: Intel(R) Xeon(TM) CPU 3.00GHz stepping 03
[ 0.258012] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 0.260184] lockdep: fixing up alternatives.
[ 0.260212] CPU 3 irqstacks, hard=c0852000 soft=c084a000
[ 0.260216] Booting processor 3 APIC 0x7 ip 0x6000
[ 0.003333] Initializing CPU#3
[ 0.003333] Calibrating delay using timer specific routine.. 5987.20 BogoMIPS (lpj=9974721)
[ 0.003333] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 0.003333] CPU: L2 cache: 2048K
[ 0.003333] CPU: Physical Processor ID: 3
[ 0.003333] CPU: Processor Core ID: 0
[ 0.003333] Intel machine check architecture supported.
[ 0.003333] Intel machine check reporting enabled on CPU#3.
[ 0.003333] CPU3: Intel P4/Xeon Extended MCE MSRs (24) available
[ 0.003333] x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106
[ 0.354577] CPU3: Intel(R) Xeon(TM) CPU 3.00GHz stepping 03
[ 0.354603] checking TSC synchronization [CPU#0 -> CPU#3]:
[ 0.356665] Measured 210 cycles TSC warp between CPUs, turning off TSC clock.
[ 0.356665] Marking TSC unstable due to check_tsc_sync_source failed
[ 0.356682] Brought up 4 CPUs
[ 0.356688] Total of 4 processors activated (24016.64 BogoMIPS).
[ 0.356769] CPU0 attaching sched-domain:
[ 0.356774] domain 0: span 0,2 level SIBLING
[ 0.356778] groups: 0 2
[ 0.356785] domain 1: span 0-3 level CPU
[ 0.356788] groups: 0,2 1,3
[ 0.356798] CPU1 attaching sched-domain:
[ 0.356801] domain 0: span 1,3 level SIBLING
[ 0.356805] groups: 1 3
[ 0.356810] domain 1: span 0-3 level CPU
[ 0.356814] groups: 1,3 0,2
[ 0.356823] CPU2 attaching sched-domain:
[ 0.356826] domain 0: span 0,2 level SIBLING
[ 0.356829] groups: 2 0
[ 0.356834] domain 1: span 0-3 level CPU
[ 0.356838] groups: 0,2 1,3
[ 0.356846] CPU3 attaching sched-domain:
[ 0.356849] domain 0: span 1,3 level SIBLING
[ 0.356852] groups: 3 1
[ 0.356858] domain 1: span 0-3 level CPU
[ 0.356861] groups: 1,3 0,2
[ 0.357057] khelper used greatest stack depth: 3012 bytes left
[ 0.357057] net_namespace: 832 bytes
[ 0.357057] Booting paravirtualized kernel on bare hardware
[ 0.357131] NET: Registered protocol family 16
[ 0.360075] ACPI: bus type pci registered
[ 0.360092] PCI: Found Intel Corporation E7520 Memory Controller Hub with MMCONFIG support.
[ 0.360092] PCI: Using MMCONFIG for extended config space
[ 0.360092] PCI: Using configuration type 1 for base access
[ 0.374278] ACPI: EC: Look up EC in DSDT
[ 0.379349] ACPI: Interpreter enabled
[ 0.379356] ACPI: (supports S0 S1 S4 S5)
[ 0.379388] ACPI: Using IOAPIC for interrupt routing
[ 0.390136] ACPI: No dock devices found.
[ 0.390164] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.390227] pci 0000:00:01.0: reg 10 32bit mmio: [0xdd000000-0xdd000fff]
[ 0.390323] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.390329] pci 0000:00:02.0: PME# disabled
[ 0.390401] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.390407] pci 0000:00:04.0: PME# disabled
[ 0.390478] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 0.390484] pci 0000:00:06.0: PME# disabled
[ 0.390582] pci 0000:00:1d.0: reg 20 io port: [0x1400-0x141f]
[ 0.390654] pci 0000:00:1d.1: reg 20 io port: [0x1420-0x143f]
[ 0.390726] pci 0000:00:1d.2: reg 20 io port: [0x1440-0x145f]
[ 0.390797] pci 0000:00:1d.3: reg 20 io port: [0x1460-0x147f]
[ 0.390877] pci 0000:00:1d.7: reg 10 32bit mmio: [0xdd001000-0xdd0013ff]
[ 0.390937] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.390945] pci 0000:00:1d.7: PME# disabled
[ 0.391063] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.391072] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
[ 0.391077] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH4 GPIO
[ 0.391109] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 0.391124] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 0.391139] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[ 0.391152] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[ 0.391163] pci 0000:00:1f.1: reg 20 io port: [0x14a0-0x14af]
[ 0.391173] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
[ 0.391243] pci 0000:00:1f.3: reg 20 io port: [0x1100-0x111f]
[ 0.391325] pci 0000:01:00.0: PXH quirk detected; SHPC device MSI disabled
[ 0.391359] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.391365] pci 0000:01:00.0: PME# disabled
[ 0.391409] pci 0000:01:00.1: reg 10 32bit mmio: [0xdd100000-0xdd100fff]
[ 0.391505] pci 0000:01:00.2: PXH quirk detected; SHPC device MSI disabled
[ 0.391539] pci 0000:01:00.2: PME# supported from D0 D3hot D3cold
[ 0.391544] pci 0000:01:00.2: PME# disabled
[ 0.391590] pci 0000:01:00.3: reg 10 32bit mmio: [0xdd101000-0xdd101fff]
[ 0.391706] pci 0000:00:02.0: bridge io port: [0x2000-0x3fff]
[ 0.391712] pci 0000:00:02.0: bridge 32bit mmio: [0xdd100000-0xdd3fffff]
[ 0.391786] pci 0000:02:03.0: reg 10 io port: [0x2000-0x20ff]
[ 0.391802] pci 0000:02:03.0: reg 14 64bit mmio: [0xdd220000-0xdd23ffff]
[ 0.391818] pci 0000:02:03.0: reg 1c 64bit mmio: [0xdd200000-0xdd21ffff]
[ 0.391834] pci 0000:02:03.0: reg 30 32bit mmio: [0x000000-0x0fffff]
[ 0.391848] pci 0000:02:03.0: supports D1 D2
[ 0.391916] pci 0000:02:03.1: reg 10 io port: [0x2400-0x24ff]
[ 0.391932] pci 0000:02:03.1: reg 14 64bit mmio: [0xdd260000-0xdd27ffff]
[ 0.391948] pci 0000:02:03.1: reg 1c 64bit mmio: [0xdd240000-0xdd25ffff]
[ 0.391963] pci 0000:02:03.1: reg 30 32bit mmio: [0x000000-0x0fffff]
[ 0.391977] pci 0000:02:03.1: supports D1 D2
[ 0.392048] pci 0000:01:00.0: bridge io port: [0x2000-0x2fff]
[ 0.392054] pci 0000:01:00.0: bridge 32bit mmio: [0xdd200000-0xdd2fffff]
[ 0.392128] pci 0000:03:02.0: reg 10 64bit mmio: [0xdd300000-0xdd31ffff]
[ 0.392149] pci 0000:03:02.0: reg 20 io port: [0x3000-0x303f]
[ 0.392175] pci 0000:03:02.0: PME# supported from D0 D3hot D3cold
[ 0.392181] pci 0000:03:02.0: PME# disabled
[ 0.392250] pci 0000:03:02.1: reg 10 64bit mmio: [0xdd320000-0xdd33ffff]
[ 0.392272] pci 0000:03:02.1: reg 20 io port: [0x3040-0x307f]
[ 0.392297] pci 0000:03:02.1: PME# supported from D0 D3hot D3cold
[ 0.392303] pci 0000:03:02.1: PME# disabled
[ 0.392373] pci 0000:01:00.2: bridge io port: [0x3000-0x3fff]
[ 0.392379] pci 0000:01:00.2: bridge 32bit mmio: [0xdd300000-0xdd3fffff]
[ 0.392518] pci 0000:05:00.0: PXH quirk detected; SHPC device MSI disabled
[ 0.392551] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[ 0.392557] pci 0000:05:00.0: PME# disabled
[ 0.392601] pci 0000:05:00.1: reg 10 32bit mmio: [0xdd400000-0xdd400fff]
[ 0.392697] pci 0000:05:00.2: PXH quirk detected; SHPC device MSI disabled
[ 0.392730] pci 0000:05:00.2: PME# supported from D0 D3hot D3cold
[ 0.392735] pci 0000:05:00.2: PME# disabled
[ 0.392776] pci 0000:05:00.3: reg 10 32bit mmio: [0xdd401000-0xdd401fff]
[ 0.392893] pci 0000:00:06.0: bridge 32bit mmio: [0xdd400000-0xdd5fffff]
[ 0.392903] pci 0000:00:06.0: bridge 64bit mmio pref: [0xdf400000-0xdf7fffff]
[ 0.393039] pci 0000:07:01.0: supports D1
[ 0.393381] pci 0000:05:00.2: bridge 32bit mmio: [0xdd500000-0xdd5fffff]
[ 0.393391] pci 0000:05:00.2: bridge 64bit mmio pref: [0xdf400000-0xdf7fffff]
[ 0.393496] pci 0000:08:0e.0: reg 10 32bit mmio: [0xdd500000-0xdd500fff]
[ 0.393515] pci 0000:08:0e.0: reg 18 32bit mmio: [0xdf400000-0xdf7fffff]
[ 0.393551] pci 0000:08:0e.0: reg 30 32bit mmio: [0x000000-0x00ffff]
[ 0.393567] pci 0000:08:0e.0: supports D1
[ 0.393626] pci 0000:07:01.0: bridge 32bit mmio: [0xdd500000-0xdd5fffff]
[ 0.393636] pci 0000:07:01.0: bridge 64bit mmio pref: [0xdf400000-0xdf7fffff]
[ 0.393708] pci 0000:09:01.0: reg 10 32bit mmio: [0xde000000-0xdeffffff]
[ 0.393718] pci 0000:09:01.0: reg 14 io port: [0x4000-0x40ff]
[ 0.393728] pci 0000:09:01.0: reg 18 32bit mmio: [0xdd600000-0xdd600fff]
[ 0.393758] pci 0000:09:01.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.393772] pci 0000:09:01.0: supports D1 D2
[ 0.393830] pci 0000:00:1e.0: transparent bridge
[ 0.393836] pci 0000:00:1e.0: bridge io port: [0x4000-0x4fff]
[ 0.393843] pci 0000:00:1e.0: bridge 32bit mmio: [0xdd600000-0xdeffffff]
[ 0.393875] bus 00 -> node 0
[ 0.393885] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.394544] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.394734] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0.PXH0._PRT]
[ 0.395051] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0.PXH1._PRT]
[ 0.395278] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEY0._PRT]
[ 0.395458] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEZ0._PRT]
[ 0.395639] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEZ0.PXH0._PRT]
[ 0.395819] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEZ0.PXH1._PRT]
[ 0.396018] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.403467] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 14 15)
[ 0.406756] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 14 15)
[ 0.406907] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 14 15)
[ 0.407056] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 14 15)
[ 0.407206] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
[ 0.407357] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 10 11 14 15) *0, disabled.
[ 0.407507] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
[ 0.407658] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 *10 11 14 15)
[ 0.407756] ACPI: WMI: Mapper loaded
[ 0.407756] SCSI subsystem initialized
[ 0.407756] libata version 3.00 loaded.
[ 0.407756] PCI: Using ACPI for IRQ routing
[ 0.413347] NET: Registered protocol family 8
[ 0.413352] NET: Registered protocol family 20
[ 0.423402] cfg80211: Using static regulatory domain info
[ 0.423402] cfg80211: Regulatory domain: US
[ 0.423402] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 0.423402] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 0.423402] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 0.423402] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 0.423402] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 0.423402] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 0.423402] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 0.423402] cfg80211: Calling CRDA for country: US
[ 0.423455] hpet clockevent registered
[ 0.423465] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.423471] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.423479] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.433345] Switched to high resolution mode on CPU 0
[ 0.434358] Switched to high resolution mode on CPU 1
[ 0.434382] Switched to high resolution mode on CPU 3
[ 0.434718] Switched to high resolution mode on CPU 2
[ 0.436697] pnp: PnP ACPI init
[ 0.436717] ACPI: bus type pnp registered
[ 0.443231] pnp: PnP ACPI: found 12 devices
[ 0.443236] ACPI: ACPI bus type pnp unregistered
[ 0.443241] PnPBIOS: Disabled by ACPI PNP
[ 0.443273] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 0.443278] system 00:01: ioport range 0x800-0x8df has been reserved
[ 0.443283] system 00:01: ioport range 0x1000-0x107f has been reserved
[ 0.443287] system 00:01: ioport range 0x1180-0x11bf has been reserved
[ 0.443291] system 00:01: ioport range 0xca2-0xca3 has been reserved
[ 0.443295] system 00:01: ioport range 0xca8-0xcaf has been reserved
[ 0.443299] system 00:01: ioport range 0x900-0x90f has been reserved
[ 0.443303] system 00:01: ioport range 0xfe00-0xfe00 has been reserved
[ 0.443308] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.480179] pci 0000:01:00.0: PCI bridge, secondary bus 0000:02
[ 0.480186] pci 0000:01:00.0: IO window: 0x2000-0x2fff
[ 0.480194] pci 0000:01:00.0: MEM window: 0xdd200000-0xdd2fffff
[ 0.480200] pci 0000:01:00.0: PREFETCH window: 0x000000d1000000-0x000000d11fffff
[ 0.480210] pci 0000:01:00.2: PCI bridge, secondary bus 0000:03
[ 0.480215] pci 0000:01:00.2: IO window: 0x3000-0x3fff
[ 0.480222] pci 0000:01:00.2: MEM window: 0xdd300000-0xdd3fffff
[ 0.480228] pci 0000:01:00.2: PREFETCH window: disabled
[ 0.480236] pci 0000:00:02.0: PCI bridge, secondary bus 0000:01
[ 0.480241] pci 0000:00:02.0: IO window: 0x2000-0x3fff
[ 0.480248] pci 0000:00:02.0: MEM window: 0xdd100000-0xdd3fffff
[ 0.480255] pci 0000:00:02.0: PREFETCH window: 0x000000d1000000-0x000000d11fffff
[ 0.480264] pci 0000:00:04.0: PCI bridge, secondary bus 0000:04
[ 0.480267] pci 0000:00:04.0: IO window: disabled
[ 0.480274] pci 0000:00:04.0: MEM window: disabled
[ 0.480280] pci 0000:00:04.0: PREFETCH window: disabled
[ 0.480292] pci 0000:05:00.0: PCI bridge, secondary bus 0000:06
[ 0.480295] pci 0000:05:00.0: IO window: disabled
[ 0.480301] pci 0000:05:00.0: MEM window: disabled
[ 0.480307] pci 0000:05:00.0: PREFETCH window: disabled
[ 0.480318] pci 0000:07:01.0: PCI bridge, secondary bus 0000:08
[ 0.480321] pci 0000:07:01.0: IO window: disabled
[ 0.480329] pci 0000:07:01.0: MEM window: 0xdd500000-0xdd5fffff
[ 0.480335] pci 0000:07:01.0: PREFETCH window: 0x000000df400000-0x000000df7fffff
[ 0.480344] pci 0000:05:00.2: PCI bridge, secondary bus 0000:07
[ 0.480347] pci 0000:05:00.2: IO window: disabled
[ 0.480354] pci 0000:05:00.2: MEM window: 0xdd500000-0xdd5fffff
[ 0.480360] pci 0000:05:00.2: PREFETCH window: 0x000000df400000-0x000000df7fffff
[ 0.480369] pci 0000:00:06.0: PCI bridge, secondary bus 0000:05
[ 0.480372] pci 0000:00:06.0: IO window: disabled
[ 0.480379] pci 0000:00:06.0: MEM window: 0xdd400000-0xdd5fffff
[ 0.480385] pci 0000:00:06.0: PREFETCH window: 0x000000df400000-0x000000df7fffff
[ 0.480395] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:09
[ 0.480401] pci 0000:00:1e.0: IO window: 0x4000-0x4fff
[ 0.480409] pci 0000:00:1e.0: MEM window: 0xdd600000-0xdeffffff
[ 0.480415] pci 0000:00:1e.0: PREFETCH window: 0x000000d1200000-0x000000d12fffff
[ 0.480440] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.480447] pci 0000:00:02.0: setting latency timer to 64
[ 0.480461] pci 0000:01:00.0: setting latency timer to 64
[ 0.480475] pci 0000:01:00.2: setting latency timer to 64
[ 0.480487] pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.480493] pci 0000:00:04.0: setting latency timer to 64
[ 0.480504] pci 0000:00:06.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.480510] pci 0000:00:06.0: setting latency timer to 64
[ 0.480522] pci 0000:05:00.0: setting latency timer to 64
[ 0.480535] pci 0000:05:00.2: setting latency timer to 64
[ 0.480553] pci 0000:00:1e.0: setting latency timer to 64
[ 0.480559] bus: 00 index 0 io port: [0x00-0xffff]
[ 0.480563] bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff]
[ 0.480567] bus: 01 index 0 io port: [0x2000-0x3fff]
[ 0.480570] bus: 01 index 1 mmio: [0xdd100000-0xdd3fffff]
[ 0.480573] bus: 01 index 2 mmio: [0xd1000000-0xd11fffff]
[ 0.480576] bus: 01 index 3 mmio: [0x0-0x0]
[ 0.480579] bus: 02 index 0 io port: [0x2000-0x2fff]
[ 0.480582] bus: 02 index 1 mmio: [0xdd200000-0xdd2fffff]
[ 0.480585] bus: 02 index 2 mmio: [0xd1000000-0xd11fffff]
[ 0.480588] bus: 02 index 3 mmio: [0x0-0x0]
[ 0.480591] bus: 03 index 0 io port: [0x3000-0x3fff]
[ 0.480594] bus: 03 index 1 mmio: [0xdd300000-0xdd3fffff]
[ 0.480597] bus: 03 index 2 mmio: [0x0-0x0]
[ 0.480600] bus: 03 index 3 mmio: [0x0-0x0]
[ 0.480603] bus: 04 index 0 mmio: [0x0-0x0]
[ 0.480606] bus: 04 index 1 mmio: [0x0-0x0]
[ 0.480608] bus: 04 index 2 mmio: [0x0-0x0]
[ 0.480611] bus: 04 index 3 mmio: [0x0-0x0]
[ 0.480614] bus: 05 index 0 mmio: [0x0-0x0]
[ 0.480617] bus: 05 index 1 mmio: [0xdd400000-0xdd5fffff]
[ 0.480620] bus: 05 index 2 mmio: [0xdf400000-0xdf7fffff]
[ 0.480623] bus: 05 index 3 mmio: [0x0-0x0]
[ 0.480625] bus: 06 index 0 mmio: [0x0-0x0]
[ 0.480628] bus: 06 index 1 mmio: [0x0-0x0]
[ 0.480631] bus: 06 index 2 mmio: [0x0-0x0]
[ 0.480634] bus: 06 index 3 mmio: [0x0-0x0]
[ 0.480636] bus: 07 index 0 mmio: [0x0-0x0]
[ 0.480639] bus: 07 index 1 mmio: [0xdd500000-0xdd5fffff]
[ 0.480642] bus: 07 index 2 mmio: [0xdf400000-0xdf7fffff]
[ 0.480645] bus: 07 index 3 mmio: [0x0-0x0]
[ 0.480648] bus: 08 index 0 mmio: [0x0-0x0]
[ 0.480651] bus: 08 index 1 mmio: [0xdd500000-0xdd5fffff]
[ 0.480654] bus: 08 index 2 mmio: [0xdf400000-0xdf7fffff]
[ 0.480657] bus: 08 index 3 mmio: [0x0-0x0]
[ 0.480660] bus: 09 index 0 io port: [0x4000-0x4fff]
[ 0.480663] bus: 09 index 1 mmio: [0xdd600000-0xdeffffff]
[ 0.480666] bus: 09 index 2 mmio: [0xd1200000-0xd12fffff]
[ 0.480669] bus: 09 index 3 io port: [0x00-0xffff]
[ 0.480673] bus: 09 index 4 mmio: [0x000000-0xffffffffffffffff]
[ 0.480688] NET: Registered protocol family 2
[ 0.490966] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.491518] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.492341] TCP bind hash table entries: 65536 (order: 9, 2359296 bytes)
[ 0.493761] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.493767] TCP reno registered
[ 0.497711] NET: Registered protocol family 1
[ 0.497923] checking if image is initramfs... it is
[ 1.114907] Freeing initrd memory: 6933k freed
[ 1.115222] Simple Boot Flag at 0x39 set to 0x1
[ 1.118203] alg: cipher: Test 1 failed on encryption for aes-asm
[ 1.118271] 00000000: 00 01 02 03 04 05 06 07 08 08 08 08 08 08 08 08
[ 1.118286] cryptomgr_test used greatest stack depth: 2824 bytes left
[ 1.119046] audit: initializing netlink socket (disabled)
[ 1.119080] type=2000 audit(1225947629.116:1): initialized
[ 1.129720] highmem bounce pool size: 64 pages
[ 1.129730] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.137038] VFS: Disk quotas dquot_6.5.1
[ 1.137286] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.139529] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 1.140308] fuse init (API version 7.10)
[ 1.140726] msgmni has been set to 1611
[ 1.141169] alg: No test for cipher_null (cipher_null-generic)
[ 1.141389] alg: No test for digest_null (digest_null-generic)
[ 1.141487] alg: No test for compress_null (compress_null-generic)
[ 1.141739] cryptomgr_test used greatest stack depth: 1912 bytes left
[ 1.143550] alg: No test for stdrng (krng)
[ 1.143892] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[ 1.143900] io scheduler noop registered
[ 1.143930] io scheduler cfq registered (default)
[ 1.144873] pci 0000:09:01.0: Boot video device
[ 1.147502] pcieport-driver 0000:00:02.0: setting latency timer to 64
[ 1.147553] pci_express 0000:00:02.0:pcie00: allocate port service
[ 1.147680] pci_express 0000:00:02.0:pcie01: allocate port service
[ 1.147905] pcieport-driver 0000:00:04.0: setting latency timer to 64
[ 1.147952] pci_express 0000:00:04.0:pcie00: allocate port service
[ 1.148067] pci_express 0000:00:04.0:pcie01: allocate port service
[ 1.148284] pcieport-driver 0000:00:06.0: setting latency timer to 64
[ 1.148327] pci_express 0000:00:06.0:pcie00: allocate port service
[ 1.148439] pci_express 0000:00:06.0:pcie01: allocate port service
[ 1.150041] aer 0000:00:02.0:pcie01: AER service couldn't init device: no _OSC support
[ 1.151187] aer 0000:00:04.0:pcie01: AER service couldn't init device: no _OSC support
[ 1.152323] aer 0000:00:06.0:pcie01: AER service couldn't init device: no _OSC support
[ 1.152928] input: Power Button (FF) as /class/input/input0
[ 1.152937] ACPI: Power Button (FF) [PWRF]
[ 1.153154] input: Power Button (CM) as /class/input/input1
[ 1.153163] ACPI: Power Button (CM) [PWRB]
[ 1.154226] processor ACPI0007:00: registered as cooling_device0
[ 1.154567] processor ACPI0007:01: registered as cooling_device1
[ 1.154918] processor ACPI0007:02: registered as cooling_device2
[ 1.155259] processor ACPI0007:03: registered as cooling_device3
[ 1.157574] isapnp: Scanning for PnP cards...
[ 1.516148] isapnp: No Plug & Play device found
[ 1.605958] Non-volatile memory driver v1.2
[ 1.605964] Linux agpgart interface v0.103
[ 1.606075] [drm] Initialized drm 1.1.0 20060810
[ 1.606080] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.606294] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.606534] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.607850] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.608488] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.613570] brd: module loaded
[ 1.615848] loop: module loaded
[ 1.615882] Intel(R) PRO/1000 Network Driver - version 7.3.20-k3-NAPI
[ 1.615886] Copyright (c) 1999-2006 Intel Corporation.
[ 1.615947] e1000 0000:03:02.0: PCI INT A -> GSI 54 (level, low) -> IRQ 54
[ 1.881797] e1000: 0000:03:02.0: e1000_probe: (PCI-X:133MHz:64-bit) 00:30:48:78:2c:7e
[ 1.913408] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
[ 1.913441] e1000 0000:03:02.1: PCI INT B -> GSI 55 (level, low) -> IRQ 55
[ 2.181800] e1000: 0000:03:02.1: e1000_probe: (PCI-X:133MHz:64-bit) 00:30:48:78:2c:7f
[ 2.213399] e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
[ 2.213539] e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k6
[ 2.213543] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 2.213900] input: Macintosh mouse button emulation as /class/input/input2
[ 2.213959] Uniform Multi-Platform E-IDE driver
[ 2.214199] ide-gd driver 1.18
[ 2.214553] arcmsr 0000:08:0e.0: PCI INT A -> GSI 98 (level, low) -> IRQ 64
[ 2.226715] ARECA RAID ADAPTER0: FIRMWARE VERSION V1.41 2006-5-24
[ 2.240022] scsi0 : Areca SATA Host Adapter RAID Controller( RAID6 capable)
[ 2.240024] Driver Version 1.20.00.15 2008/02/27
[ 2.241308] Driver 'sd' needs updating - please use bus_type methods
[ 2.241466] scsi 0:0:0:0: Direct-Access ABERDEEN Boot Vol R001 PQ: 0 ANSI: 3
[ 2.241690] Fusion MPT base driver 3.04.07
[ 2.241696] Copyright (c) 1999-2008 LSI Corporation
[ 2.241718] Fusion MPT SPI Host driver 3.04.07
[ 2.241726] scsi 0:0:0:1: Direct-Access ABERDEEN Ted Data #1 R001 PQ: 0 ANSI: 3
[ 2.241791] mptspi 0000:02:03.0: PCI INT A -> GSI 28 (level, low) -> IRQ 28
[ 2.241909] scsi 0:0:0:2: Direct-Access ABERDEEN Ted Data #2 R001 PQ: 0 ANSI: 3
[ 2.241936] mptbase: ioc0: Initiating bringup
[ 2.242087] scsi 0:0:0:3: Direct-Access ABERDEEN Ted Data #3 R001 PQ: 0 ANSI: 3
[ 2.243679] scsi 0:0:16:0: Processor Areca RAID controller R001 PQ: 0 ANSI: 0
[ 2.244260] sd 0:0:0:0: [sda] 39061504 512-byte hardware sectors: (19.9 GB/18.6 GiB)
[ 2.244330] sd 0:0:0:0: [sda] Write Protect is off
[ 2.244335] sd 0:0:0:0: [sda] Mode Sense: cb 00 00 08
[ 2.244466] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.244675] sd 0:0:0:0: [sda] 39061504 512-byte hardware sectors: (19.9 GB/18.6 GiB)
[ 2.244743] sd 0:0:0:0: [sda] Write Protect is off
[ 2.244749] sd 0:0:0:0: [sda] Mode Sense: cb 00 00 08
[ 2.244864] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.244873] sda: sda1 sda2 < sda5 >
[ 2.257385] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.258218] sd 0:0:0:1: [sdb] 1464842240 512-byte hardware sectors: (749 GB/698 GiB)
[ 2.258287] sd 0:0:0:1: [sdb] Write Protect is off
[ 2.258292] sd 0:0:0:1: [sdb] Mode Sense: cb 00 00 08
[ 2.258398] sd 0:0:0:1: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.258569] sd 0:0:0:1: [sdb] 1464842240 512-byte hardware sectors: (749 GB/698 GiB)
[ 2.258638] sd 0:0:0:1: [sdb] Write Protect is off
[ 2.258643] sd 0:0:0:1: [sdb] Mode Sense: cb 00 00 08
[ 2.258756] sd 0:0:0:1: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.258765] sdb: unknown partition table
[ 2.259789] sd 0:0:0:1: [sdb] Attached SCSI disk
[ 2.260491] sd 0:0:0:2: [sdc] 1464842240 512-byte hardware sectors: (749 GB/698 GiB)
[ 2.260563] sd 0:0:0:2: [sdc] Write Protect is off
[ 2.260569] sd 0:0:0:2: [sdc] Mode Sense: cb 00 00 08
[ 2.260689] sd 0:0:0:2: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.260861] sd 0:0:0:2: [sdc] 1464842240 512-byte hardware sectors: (749 GB/698 GiB)
[ 2.260927] sd 0:0:0:2: [sdc] Write Protect is off
[ 2.260932] sd 0:0:0:2: [sdc] Mode Sense: cb 00 00 08
[ 2.261053] sd 0:0:0:2: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.261063] sdc: unknown partition table
[ 2.262043] sd 0:0:0:2: [sdc] Attached SCSI disk
[ 2.262732] sd 0:0:0:3: [sdd] 937496576 512-byte hardware sectors: (479 GB/447 GiB)
[ 2.262794] sd 0:0:0:3: [sdd] Write Protect is off
[ 2.262799] sd 0:0:0:3: [sdd] Mode Sense: cb 00 00 08
[ 2.262928] sd 0:0:0:3: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.263131] sd 0:0:0:3: [sdd] 937496576 512-byte hardware sectors: (479 GB/447 GiB)
[ 2.263201] sd 0:0:0:3: [sdd] Write Protect is off
[ 2.263207] sd 0:0:0:3: [sdd] Mode Sense: cb 00 00 08
[ 2.263333] sd 0:0:0:3: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.263341] sdd: sdd1 sdd2
[ 2.264222] sd 0:0:0:3: [sdd] Attached SCSI disk
[ 2.646685] ioc0: LSI53C1030 C0: Capabilities={Initiator}
[ 3.013449] scsi1 : ioc0: LSI53C1030 C0, FwRev=01030700h, Ports=1, MaxQ=222, IRQ=28
[ 3.620139] mptspi 0000:02:03.1: PCI INT B -> GSI 29 (level, low) -> IRQ 29
[ 3.620298] mptbase: ioc1: Initiating bringup
[ 4.026684] ioc1: LSI53C1030 C0: Capabilities={Initiator}
[ 4.393457] scsi2 : ioc1: LSI53C1030 C0, FwRev=01030700h, Ports=1, MaxQ=222, IRQ=29
[ 5.000578] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 5.003539] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 5.003553] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 5.010330] mice: PS/2 mouse device common for all mice
[ 5.015044] cpuidle: using governor ladder
[ 5.015049] cpuidle: using governor menu
[ 5.015243] Advanced Linux Sound Architecture Driver Version 1.0.18rc3.
[ 5.020497] ALSA device list:
[ 5.020501] No soundcards found.
[ 5.021833] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 5.021858] TCP cubic registered
[ 5.022590] RPC: Registered udp transport module.
[ 5.022594] RPC: Registered tcp transport module.
[ 5.022713] Using IPI No-Shortcut mode
[ 5.023565] scsi: waiting for bus probes to complete ...
[ 5.047515] input: AT Translated Set 2 keyboard as /class/input/input3
[ 5.680315] input: PS/2 Generic Mouse as /class/input/input4
[ 8.755082] Freeing unused kernel memory: 1528k freed
[ 8.755371] Write protecting the kernel read-only data: 1808k
[ 9.066797] usplash[1538]: segfault at c1471 ip 00001471 sp 00000ffa error 15 in zero (deleted)[1000+9f000]
[ 10.138762] device-mapper: uevent: version 1.0.3
[ 10.139310] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 10.178456] md: linear personality registered for level -1
[ 10.186457] md: multipath personality registered for level -4
[ 10.193863] md: raid0 personality registered for level 0
[ 10.203628] md: raid1 personality registered for level 1
[ 10.210393] xor: automatically using best checksumming function: pIII_sse
[ 10.227922] pIII_sse : 5544.000 MB/sec
[ 10.227927] xor: using function: pIII_sse (5544.000 MB/sec)
[ 10.228935] async_tx: api initialized (sync-only)
[ 10.291308] raid6: int32x1 725 MB/s
[ 10.347954] raid6: int32x2 727 MB/s
[ 10.404658] raid6: int32x4 652 MB/s
[ 10.461286] raid6: int32x8 598 MB/s
[ 10.517939] raid6: mmxx1 1812 MB/s
[ 10.574613] raid6: mmxx2 2058 MB/s
[ 10.631257] raid6: sse1x1 1094 MB/s
[ 10.687931] raid6: sse1x2 1927 MB/s
[ 10.744594] raid6: sse2x1 2183 MB/s
[ 10.801273] raid6: sse2x2 3132 MB/s
[ 10.801276] raid6: using algorithm sse2x2 (3132 MB/s)
[ 10.801282] md: raid6 personality registered for level 6
[ 10.801286] md: raid5 personality registered for level 5
[ 10.801289] md: raid4 personality registered for level 4
[ 10.837081] md: raid10 personality registered for level 10
[ 11.363730] kjournald starting. Commit interval 5 seconds
[ 11.363771] EXT3-fs: mounted filesystem with ordered data mode.
[ 15.808959] udevd used greatest stack depth: 1800 bytes left
[ 16.194963] e1000: eth0: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[ 16.587198] NET: Registered protocol family 10
[ 16.589961] lo: Disabled Privacy Extensions
[ 16.594335] modprobe used greatest stack depth: 1760 bytes left
[ 17.111098] EDAC MC: Ver: 2.1.0 Nov 5 2008
[ 17.271832] EDAC e752x: tolm = d0000, remapbase = 100000, remaplimit = 12c000
[ 17.271932] EDAC MC0: Giving out device to 'e752x_edac' 'E7520': DEV 0000:00:00.0
[ 17.272148] EDAC PCI0: Giving out device to module 'e752x_edac' controller 'EDAC PCI controller': DEV '0000:00:00.0' (POLLED)
[ 17.337020] usbcore: registered new interface driver usbfs
[ 17.337178] usbcore: registered new interface driver hub
[ 17.351997] ata_piix 0000:00:1f.1: version 2.12
[ 17.352028] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 17.352118] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 17.374716] usbcore: registered new device driver usb
[ 17.388278] uhci_hcd: USB Universal Host Controller Interface driver
[ 17.388386] scsi3 : ata_piix
[ 17.396082] scsi4 : ata_piix
[ 17.398167] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x14a0 irq 14
[ 17.398175] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x14a8 irq 15
[ 17.409044] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 17.617915] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 17.617922] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[ 17.678924] input: PC Speaker as /class/input/input5
[ 17.710381] ata2.00: ATAPI: _NEC DVD+/-RW ND-6650A, 1.23, max UDMA/33
[ 17.723636] ata2.00: configured for UDMA/33
[ 17.734037] scsi 4:0:0:0: CD-ROM _NEC DVD+-RW ND-6650A 1.23 PQ: 0 ANSI: 5
[ 17.734640] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 17.734659] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 17.734669] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 17.734867] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 17.734922] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001400
[ 17.735204] usb usb1: configuration #1 chosen from 1 choice
[ 17.735333] hub 1-0:1.0: USB hub found
[ 17.735352] hub 1-0:1.0: 2 ports detected
[ 17.735889] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 17.735896] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 17.735902] usb usb1: Product: UHCI Host Controller
[ 17.735907] usb usb1: Manufacturer: Linux 2.6.28-rc3-00123-g72a0780 uhci_hcd
[ 17.735912] usb usb1: SerialNumber: 0000:00:1d.0
[ 17.735990] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 17.736379] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 17.736388] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 17.736512] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 17.740448] ehci_hcd 0000:00:1d.7: debug port 1
[ 17.740461] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
[ 17.740492] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xdd001000
[ 17.744509] iTCO_vendor_support: vendor-support=0
[ 17.750849] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
[ 17.751086] iTCO_wdt: Found a ICH5 or ICH5R TCO device (Version=1, TCOBASE=0x1060)
[ 17.751245] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 17.754196] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 17.754498] usb usb2: configuration #1 chosen from 1 choice
[ 17.754641] hub 2-0:1.0: USB hub found
[ 17.754664] hub 2-0:1.0: 8 ports detected
[ 17.755163] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 17.755171] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 17.755176] usb usb2: Product: EHCI Host Controller
[ 17.755182] usb usb2: Manufacturer: Linux 2.6.28-rc3-00123-g72a0780 ehci_hcd
[ 17.755187] usb usb2: SerialNumber: 0000:00:1d.7
[ 17.755267] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 17.755283] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 17.755291] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 17.755402] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 17.755454] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001420
[ 17.755727] usb usb3: configuration #1 chosen from 1 choice
[ 17.755860] hub 3-0:1.0: USB hub found
[ 17.755879] hub 3-0:1.0: 2 ports detected
[ 17.760170] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 17.760178] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 17.760184] usb usb3: Product: UHCI Host Controller
[ 17.760189] usb usb3: Manufacturer: Linux 2.6.28-rc3-00123-g72a0780 uhci_hcd
[ 17.760194] usb usb3: SerialNumber: 0000:00:1d.1
[ 17.760256] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 17.760271] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 17.760279] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 17.760394] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 17.760446] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001440
[ 17.760729] usb usb4: configuration #1 chosen from 1 choice
[ 17.760901] hub 4-0:1.0: USB hub found
[ 17.760921] hub 4-0:1.0: 2 ports detected
[ 17.761356] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 17.761363] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 17.761370] usb usb4: Product: UHCI Host Controller
[ 17.761375] usb usb4: Manufacturer: Linux 2.6.28-rc3-00123-g72a0780 uhci_hcd
[ 17.761381] usb usb4: SerialNumber: 0000:00:1d.2
[ 17.761444] uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 17.761465] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 17.761474] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 17.761586] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 17.761619] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001460
[ 17.761902] usb usb5: configuration #1 chosen from 1 choice
[ 17.762032] hub 5-0:1.0: USB hub found
[ 17.762050] hub 5-0:1.0: 2 ports detected
[ 17.762504] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 17.762511] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 17.762517] usb usb5: Product: UHCI Host Controller
[ 17.762522] usb usb5: Manufacturer: Linux 2.6.28-rc3-00123-g72a0780 uhci_hcd
[ 17.762527] usb usb5: SerialNumber: 0000:00:1d.3
[ 17.762941] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 17.810816] Floppy drive(s): fd0 is 1.44M
[ 17.837594] FDC 0 is a National Semiconductor PC87306
[ 17.850961] intel_rng: FWH not detected
[ 18.716834] Driver 'sr' needs updating - please use bus_type methods
[ 18.724398] warning: `ntpd' uses 32-bit capabilities (legacy support in use)
[ 18.742826] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 18.742835] Uniform CD-ROM driver Revision: 3.20
[ 18.743182] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 18.813068] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 18.813180] sd 0:0:0:1: Attached scsi generic sg1 type 0
[ 18.813293] sd 0:0:0:2: Attached scsi generic sg2 type 0
[ 18.813445] sd 0:0:0:3: Attached scsi generic sg3 type 0
[ 18.813585] scsi 0:0:16:0: Attached scsi generic sg4 type 3
[ 18.813723] sr 4:0:0:0: Attached scsi generic sg5 type 5
[ 19.745910] lp: driver loaded but no devices found
[ 19.876784] Adding 827308k swap on /dev/sda5. Priority:-1 extents:1 across:827308k
[ 20.187676] EXT3 FS on sda1, internal journal
[ 20.826311] kjournald starting. Commit interval 5 seconds
[ 20.826638] EXT3 FS on sdc, internal journal
[ 20.826653] EXT3-fs: mounted filesystem with ordered data mode.
[ 21.012483] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 21.103968] ISO 9660 Extensions: RRIP_1991A
[ 23.369385] toshiba_acpi: Unknown parameter `hotkeys_over_acpi'
[ 24.657314] ppdev: user-space parallel port driver
[ 24.949010] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 24.949015] apm: disabled - APM is not SMP safe.
[ 26.790428] eth0: no IPv6 routers present
[ 27.807225] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 27.817857] NFSD: starting 90-second grace period
[ 30.007422] lsb_release used greatest stack depth: 1752 bytes left
[ 32.115122] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 32.685297] NET: Registered protocol family 17
[ 32.891483] mtrr: type mismatch for de000000,800000 old: write-back new: write-combining
[ 32.915222] mtrr: type mismatch for de000000,800000 old: write-back new: write-combining
next prev parent reply other threads:[~2008-11-06 5:23 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-11-04 22:45 2.6.28-rc2: REGRESSION in early boot Theodore Tso
2008-11-05 0:14 ` Yinghai Lu
2008-11-05 0:17 ` Yinghai Lu
2008-11-05 15:35 ` Theodore Tso
2008-11-05 16:11 ` Cyrill Gorcunov
2008-11-05 17:22 ` Yinghai Lu
2008-11-06 5:23 ` Theodore Tso [this message]
2008-11-06 6:02 ` Yinghai Lu
2008-11-06 6:27 ` Yinghai Lu
2008-11-06 6:39 ` Yinghai Lu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20081106052340.GA12762@mit.edu \
--to=tytso@mit.edu \
--cc=linux-kernel@vger.kernel.org \
--cc=tglx@linutronix.de \
--cc=yinghai@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.