From: akpm@linux-foundation.org
To: mm-commits@vger.kernel.org
Cc: linux-kernel@lebenslange-mailadresse.de, calle@calle.de,
kkeil@suse.de, stable@kernel.org
Subject: + b1isa-fix-b1isa_exit-to-really-remove-registered-capi-controllers.patch added to -mm tree
Date: Thu, 06 Nov 2008 13:21:43 -0800 [thread overview]
Message-ID: <200811062121.mA6LLh4Q026313@imap1.linux-foundation.org> (raw)
The patch titled
b1isa: fix b1isa_exit() to really remove registered capi controllers
has been added to the -mm tree. Its filename is
b1isa-fix-b1isa_exit-to-really-remove-registered-capi-controllers.patch
Before you just go and hit "reply", please:
a) Consider who else should be cc'ed
b) Prefer to cc a suitable mailing list as well
c) Ideally: find the original patch on the mailing list and do a
reply-to-all to that, adding suitable additional cc's
*** Remember to use Documentation/SubmitChecklist when testing your code ***
See http://userweb.kernel.org/~akpm/stuff/added-to-mm.txt to find
out what to do about this
The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/
------------------------------------------------------
Subject: b1isa: fix b1isa_exit() to really remove registered capi controllers
From: Wilfried Klaebe <linux-kernel@lebenslange-mailadresse.de>
On "/etc/init.d/capiutils stop", this oops happened.
The oops happens on reading /proc/capi/controllers because
capi_ctrl->procinfo is called for the wrongly not unregistered
controller, which points to b1isa_procinfo(), which was removed on
module unload.
b1isa_exit() did not call b1isa_remove() for its controllers because
io[0] == 0 on module unload despite having been 0x340 on module load.
Besides, just removing the controllers that where added on module
load time and not those that were added later via b1isa_add_card() is
wrong too - the place where all added cards are found is isa_dev[].
relevant dmesg lines:
[ 0.000000] Linux version 2.6.27.4 (w@shubashi) (gcc version 4.3.2 (Debian 4.3.2-1) ) #3 Thu Oct 30 16:49:03 CET 2008
[ 67.403555] CAPI Subsystem Rev 1.1.2.8
[ 68.529154] capifs: Rev 1.1.2.3
[ 68.563292] capi20: Rev 1.1.2.7: started up with major 68 (middleware+capifs)
[ 77.026936] b1: revision 1.1.2.2
[ 77.049992] b1isa: revision 1.1.2.3
[ 77.722655] kcapi: Controller [001]: b1isa-340 attached
[ 77.722671] b1isa: AVM B1 ISA at i/o 0x340, irq 5, revision 255
[ 81.272669] b1isa-340: card 1 "B1" ready.
[ 81.272683] b1isa-340: card 1 Protocol: DSS1
[ 81.272689] b1isa-340: card 1 Linetype: point to multipoint
[ 81.272695] b1isa-340: B1-card (3.11-03) now active
[ 81.272702] kcapi: card [001] "b1isa-340" ready.
[ 153.721281] kcapi: card [001] down.
[ 154.151889] BUG: unable to handle kernel paging request at e87af000
[ 154.152081] IP: [<e87af000>]
[ 154.153292] *pde = 2655b067 *pte = 00000000
[ 154.153307] Oops: 0000 [#1]
[ 154.153360] Modules linked in: rfcomm l2cap ppdev lp ipt_MASQUERADE tun capi capifs kernelcapi ac battery nfsd exportfs nfs lockd nfs_acl sunrpc sit tunnel4 bridge stp llc ipt_REJECT ipt_LOG xt_tcpudp xt_state iptable_filter iptable_mangle iptable_nat nf_nat nf_conntrack_ipv4 nf_conntrack ip_tables x_tables nls_utf8 isofs nls_base zlib_inflate loop ipv6 netconsole snd_via82xx dvb_usb_dib0700 gameport dib7000p dib7000m dvb_usb snd_ac97_codec ac97_bus dvb_core mt2266 snd_pcm tuner_xc2028 dib3000mc dibx000_common mt2060 dib0070 snd_page_alloc snd_mpu401_uart snd_seq_midi snd_seq_midi_event btusb snd_rawmidi bluetooth snd_seq snd_timer snd_seq_device snd via686a i2c_viapro soundcore i2c_core parport_pc parport button dm_mirror dm_log dm_snapshot floppy sg ohci1394 uhci_hcd ehci_hcd 8139too
mii ieee1394 usbcore sr_mod cdrom sd_mod thermal processor fan [last unloaded: b1]
[ 154.153360]
[ 154.153360] Pid: 4132, comm: capiinit Not tainted (2.6.27.4 #3)
[ 154.153360] EIP: 0060:[<e87af000>] EFLAGS: 00010286 CPU: 0
[ 154.153360] EIP is at 0xe87af000
[ 154.153360] EAX: e6b9ccc8 EBX: e6b9ccc8 ECX: e87a0c67 EDX: e87af000
[ 154.153360] ESI: e142bbc0 EDI: e87a56e0 EBP: e0505f0c ESP: e0505ee4
[ 154.153360] DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068
[ 154.153360] Process capiinit (pid: 4132, ti=e0504000 task=d1196cf0 task.ti=e0504000)
[ 154.153360] Stack: e879f650 00000246 e0505ef4 c01472eb e0505f0c 00000246 e7001780 fffffff4
[ 154.153360] fffffff4 e142bbc0 e0505f48 c01a56c6 00000400 b805e000 d102dc80 e142bbe0
[ 154.153360] 00000000 e87a56e0 00000246 e12617ac 00000000 00000000 e1261760 fffffffb
[ 154.153360] Call Trace:
[ 154.153360] [<e879f650>] ? controller_show+0x20/0x90 [kernelcapi]
[ 154.153360] [<c01472eb>] ? trace_hardirqs_on+0xb/0x10
[ 154.153360] [<c01a56c6>] ? seq_read+0x126/0x2f0
[ 154.153360] [<c01a55a0>] ? seq_read+0x0/0x2f0
[ 154.153360] [<c01c033c>] ? proc_reg_read+0x5c/0x90
[ 154.153360] [<c0189919>] ? vfs_read+0x99/0x140
[ 154.153360] [<c01c02e0>] ? proc_reg_read+0x0/0x90
[ 154.153360] [<c0189a7d>] ? sys_read+0x3d/0x70
[ 154.153360] [<c0103c3d>] ? sysenter_do_call+0x12/0x35
[ 154.153360] =======================
[ 154.153360] Code: Bad EIP value.
[ 154.153360] EIP: [<e87af000>] 0xe87af000 SS:ESP 0068:e0505ee4
[ 154.153360] ---[ end trace 23750b6c2862de94 ]---
Signed-off-by: Wilfried Klaebe <linux-kernel@lebenslange-mailadresse.de>
Cc: <calle@calle.de>
Cc: Karsten Keil <kkeil@suse.de>
Cc: <stable@kernel.org> [2.6.everything]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
drivers/isdn/hardware/avm/b1isa.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff -puN drivers/isdn/hardware/avm/b1isa.c~b1isa-fix-b1isa_exit-to-really-remove-registered-capi-controllers drivers/isdn/hardware/avm/b1isa.c
--- a/drivers/isdn/hardware/avm/b1isa.c~b1isa-fix-b1isa_exit-to-really-remove-registered-capi-controllers
+++ a/drivers/isdn/hardware/avm/b1isa.c
@@ -233,10 +233,8 @@ static void __exit b1isa_exit(void)
int i;
for (i = 0; i < MAX_CARDS; i++) {
- if (!io[i])
- break;
reply other threads:[~2008-11-06 21:22 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200811062121.mA6LLh4Q026313@imap1.linux-foundation.org \
--to=akpm@linux-foundation.org \
--cc=calle@calle.de \
--cc=kkeil@suse.de \
--cc=linux-kernel@lebenslange-mailadresse.de \
--cc=linux-kernel@vger.kernel.org \
--cc=mm-commits@vger.kernel.org \
--cc=stable@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.