From: Aurelien Jarno <aurelien@aurel32.net>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PATCH v2 03/11] target-mips: optimize gen_op_addr_add() (2/2)
Date: Sat, 8 Nov 2008 20:17:40 +0100 [thread overview]
Message-ID: <20081108191740.GD15084@volta.aurel32.net> (raw)
In-Reply-To: <20081108191604.GA20748@volta.aurel32.net>
Instead of dynamically generating different code depending on the UX
flag, add a new flag in ctx->flags to generate different code.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
---
target-mips/cpu.h | 13 +++++++------
target-mips/exec.h | 5 ++++-
target-mips/translate.c | 11 ++---------
3 files changed, 13 insertions(+), 16 deletions(-)
diff --git a/target-mips/cpu.h b/target-mips/cpu.h
index a27ffd3..d686f8e 100644
--- a/target-mips/cpu.h
+++ b/target-mips/cpu.h
@@ -411,7 +411,7 @@ struct CPUMIPSState {
int error_code;
uint32_t hflags; /* CPU State */
/* TMASK defines different execution modes */
-#define MIPS_HFLAG_TMASK 0x01FF
+#define MIPS_HFLAG_TMASK 0x03FF
#define MIPS_HFLAG_MODE 0x0007 /* execution modes */
/* The KSU flags must be the lowest bits in hflags. The flag order
must be the same as defined for CP0 Status. This allows to use
@@ -430,15 +430,16 @@ struct CPUMIPSState {
and RSQRT.D. */
#define MIPS_HFLAG_COP1X 0x0080 /* COP1X instructions enabled */
#define MIPS_HFLAG_RE 0x0100 /* Reversed endianness */
+#define MIPS_HFLAG_UX 0x0200 /* 64-bit user mode */
/* If translation is interrupted between the branch instruction and
* the delay slot, record what type of branch it is so that we can
* resume translation properly. It might be possible to reduce
* this from three bits to two. */
-#define MIPS_HFLAG_BMASK 0x0e00
-#define MIPS_HFLAG_B 0x0200 /* Unconditional branch */
-#define MIPS_HFLAG_BC 0x0400 /* Conditional branch */
-#define MIPS_HFLAG_BL 0x0600 /* Likely branch */
-#define MIPS_HFLAG_BR 0x0800 /* branch to register (can't link TB) */
+#define MIPS_HFLAG_BMASK 0x1C00
+#define MIPS_HFLAG_B 0x0400 /* Unconditional branch */
+#define MIPS_HFLAG_BC 0x0800 /* Conditional branch */
+#define MIPS_HFLAG_BL 0x0C00 /* Likely branch */
+#define MIPS_HFLAG_BR 0x1000 /* branch to register (can't link TB) */
target_ulong btarget; /* Jump / branch target */
int bcond; /* Branch condition (if needed) */
diff --git a/target-mips/exec.h b/target-mips/exec.h
index 28bf466..5d3e356 100644
--- a/target-mips/exec.h
+++ b/target-mips/exec.h
@@ -66,7 +66,8 @@ static inline int cpu_halted(CPUState *env)
static inline void compute_hflags(CPUState *env)
{
env->hflags &= ~(MIPS_HFLAG_COP1X | MIPS_HFLAG_64 | MIPS_HFLAG_CP0 |
- MIPS_HFLAG_F64 | MIPS_HFLAG_FPU | MIPS_HFLAG_KSU);
+ MIPS_HFLAG_F64 | MIPS_HFLAG_FPU | MIPS_HFLAG_KSU |
+ MIPS_HFLAG_UX);
if (!(env->CP0_Status & (1 << CP0St_EXL)) &&
!(env->CP0_Status & (1 << CP0St_ERL)) &&
!(env->hflags & MIPS_HFLAG_DM)) {
@@ -77,6 +78,8 @@ static inline void compute_hflags(CPUState *env)
(env->CP0_Status & (1 << CP0St_PX)) ||
(env->CP0_Status & (1 << CP0St_UX)))
env->hflags |= MIPS_HFLAG_64;
+ if (env->CP0_Status & (1 << CP0St_UX))
+ env->hflags |= MIPS_HFLAG_UX;
#endif
if ((env->CP0_Status & (1 << CP0St_CU0)) ||
!(env->hflags & MIPS_HFLAG_KSU))
diff --git a/target-mips/translate.c b/target-mips/translate.c
index f78bfde..af01f73 100644
--- a/target-mips/translate.c
+++ b/target-mips/translate.c
@@ -902,16 +902,9 @@ static inline void gen_op_addr_add (DisasContext *ctx, TCGv t0, TCGv t1)
/* For compatibility with 32-bit code, data reference in user mode
with Status_UX = 0 should be casted to 32-bit and sign extended.
See the MIPS64 PRA manual, section 4.10. */
- if ((ctx->hflags & MIPS_HFLAG_KSU) == MIPS_HFLAG_UM) {
- int l1 = gen_new_label();
- TCGv r_tmp = tcg_temp_new(TCG_TYPE_I32);
-
- tcg_gen_ld_i32(r_tmp, cpu_env, offsetof(CPUState, CP0_Status));
- tcg_gen_andi_i32(r_tmp, r_tmp, (1 << CP0St_UX));
- tcg_gen_brcondi_i32(TCG_COND_NE, r_tmp, 0, l1);
+ if (((ctx->hflags & MIPS_HFLAG_KSU) == MIPS_HFLAG_UM) &&
+ (ctx->hflags & MIPS_HFLAG_UX)) {
tcg_gen_ext32s_i64(t0, t0);
- gen_set_label(l1);
- tcg_temp_free(r_tmp);
}
#endif
}
--
1.5.6.5
--
.''`. Aurelien Jarno | GPG: 1024D/F1BCDB73
: :' : Debian developer | Electrical Engineer
`. `' aurel32@debian.org | aurelien@aurel32.net
`- people.debian.org/~aurel32 | www.aurel32.net
next prev parent reply other threads:[~2008-11-08 19:17 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-11-08 19:16 [Qemu-devel] [PATCH v2 0/11] target-mips: optimizations Aurelien Jarno
2008-11-08 19:16 ` [Qemu-devel] [PATCH v2 01/11] target-mips: optimize gen_save_pc() Aurelien Jarno
2008-11-08 19:17 ` [Qemu-devel] [PATCH v2 02/11] target-mips: optimize gen_op_addr_add() (1/2) Aurelien Jarno
2008-11-08 19:17 ` Aurelien Jarno [this message]
2008-11-08 19:18 ` [Qemu-devel] [PATCH v2 04/11] target-mips: convert bitfield ops to TCG Aurelien Jarno
2008-11-08 19:19 ` [Qemu-devel] [PATCH v2 05/11] target-mips: convert bit shuffle " Aurelien Jarno
2008-11-08 19:19 ` [Qemu-devel] [PATCH v2 06/11] target-mips: optimize gen_arith()/gen_arith_imm() Aurelien Jarno
2008-11-08 19:20 ` [Qemu-devel] [PATCH v2 07/11] target-mips: optimize gen_muldiv() Aurelien Jarno
2008-11-08 19:20 ` [Qemu-devel] [PATCH v2 08/11] target-mips: optimize gen_farith() Aurelien Jarno
2008-11-08 19:21 ` [Qemu-devel] [PATCH v2 09/11] target-mips: optimize movc*() Aurelien Jarno
2008-11-08 19:21 ` [Qemu-devel] [PATCH 10/11] target-mips: gen_compute_branch1() Aurelien Jarno
2008-11-08 19:22 ` [Qemu-devel] [PATCH v2 11/11] target-mips: fix temporary variable freeing in op_ldst_##insn() Aurelien Jarno
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20081108191740.GD15084@volta.aurel32.net \
--to=aurelien@aurel32.net \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.