All of lore.kernel.org
 help / color / mirror / Atom feed
From: Kyungmin Park <kmpark@infradead.org>
To: linux-mtd@lists.infradead.org
Cc: ext-adrian.hunter@nokia.com
Subject: [PATCH][OneNAND] Write-while-program support v2
Date: Mon, 17 Nov 2008 17:54:28 +0900	[thread overview]
Message-ID: <20081117085428.GA32430@july> (raw)

This is from Adrian hunter and modified for write_ops operation.

It's similar with read-while-program method.
but it's write side performance improvement.

Here's *updated* brief performance results.
Note: Measured from OMAP3 with async OneNAND mode. (not sync mode)

=================================================================
speedtest: dev = 3
speedtest: Size=16777216  EB size=131072  Write size=2048  EB count=128
                Pages per EB=64  Page size=2048
speedtest: scanning for bad blocks
speedtest: scanned 0
speedtest: scanned 128, found 0 bad
speedtest: erasing
speedtest: erased 0
speedtest: erased 128
speedtest: Testing eraseblock write speed
eraseblock write speed is 2592 KiB/s
speedtest: Testing eraseblock read speed
eraseblock read speed is 16786 KiB/s
speedtest: Testing page write speed
page write speed is 2966 KiB/s
speedtest: Testing page read speed
page read speed is 13277 KiB/s
speedtest: Testing 2 page write speed
2 page write speed is 3182 KiB/s
speedtest: Testing 2 page read speed
2 page read speed is 14773 KiB/s
speedtest: Testing erase speed
erase speed is 192752 KiB/s
speedtest: speedtest finished
=================================================================

Also it's passed all nand-tests.

Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c
index aaf3504..5a27adb 100644
--- a/drivers/mtd/onenand/onenand_base.c
+++ b/drivers/mtd/onenand/onenand_base.c
@@ -1455,7 +1455,8 @@ static int onenand_write_ops_nolock(struct mtd_info *mtd, loff_t to,
 				struct mtd_oob_ops *ops)
 {
 	struct onenand_chip *this = mtd->priv;
-	int written = 0, column, thislen, subpage;
+	int written = 0, column, thislen = 0, subpage = 0;
+	int prev = 0, prevlen = 0, prev_subpage = 0, first = 1;
 	int oobwritten = 0, oobcolumn, thisooblen, oobsize;
 	size_t len = ops->len;
 	size_t ooblen = ops->ooblen;
@@ -1482,6 +1483,10 @@ static int onenand_write_ops_nolock(struct mtd_info *mtd, loff_t to,
                 return -EINVAL;
         }
 
+	/* Check zero length */
+	if (!len)
+		return 0;
+
 	if (ops->mode == MTD_OOB_AUTO)
 		oobsize = this->ecclayout->oobavail;
 	else
@@ -1492,79 +1497,125 @@ static int onenand_write_ops_nolock(struct mtd_info *mtd, loff_t to,
 	column = to & (mtd->writesize - 1);
 
 	/* Loop until all data write */
-	while (written < len) {
-		u_char *wbuf = (u_char *) buf;
+	while (1) {
+		if (written < len) {
+			u_char *wbuf = (u_char *) buf;
 
-		thislen = min_t(int, mtd->writesize - column, len - written);
-		thisooblen = min_t(int, oobsize - oobcolumn, ooblen - oobwritten);
+			thislen = min_t(int, mtd->writesize - column, len - written);
+			thisooblen = min_t(int, oobsize - oobcolumn, ooblen - oobwritten);
 
-		cond_resched();
+			cond_resched();
 
-		this->command(mtd, ONENAND_CMD_BUFFERRAM, to, thislen);
+			this->command(mtd, ONENAND_CMD_BUFFERRAM, to, thislen);
 
-		/* Partial page write */
-		subpage = thislen < mtd->writesize;
-		if (subpage) {
-			memset(this->page_buf, 0xff, mtd->writesize);
-			memcpy(this->page_buf + column, buf, thislen);
-			wbuf = this->page_buf;
-		}
+			/* Partial page write */
+			subpage = thislen < mtd->writesize;
+			if (subpage) {
+				memset(this->page_buf, 0xff, mtd->writesize);
+				memcpy(this->page_buf + column, buf, thislen);
+				wbuf = this->page_buf;
+			}
 
-		this->write_bufferram(mtd, ONENAND_DATARAM, wbuf, 0, mtd->writesize);
+			this->write_bufferram(mtd, ONENAND_DATARAM, wbuf, 0, mtd->writesize);
 
-		if (oob) {
-			oobbuf = this->oob_buf;
+			if (oob) {
+				oobbuf = this->oob_buf;
 
-			/* We send data to spare ram with oobsize
-			 * to prevent byte access */
-			memset(oobbuf, 0xff, mtd->oobsize);
-			if (ops->mode == MTD_OOB_AUTO)
-				onenand_fill_auto_oob(mtd, oobbuf, oob, oobcolumn, thisooblen);
-			else
-				memcpy(oobbuf + oobcolumn, oob, thisooblen);
+				/* We send data to spare ram with oobsize
+				 * to prevent byte access */
+				memset(oobbuf, 0xff, mtd->oobsize);
+				if (ops->mode == MTD_OOB_AUTO)
+					onenand_fill_auto_oob(mtd, oobbuf, oob, oobcolumn, thisooblen);
+				else
+					memcpy(oobbuf + oobcolumn, oob, thisooblen);
 
-			oobwritten += thisooblen;
-			oob += thisooblen;
-			oobcolumn = 0;
+				oobwritten += thisooblen;
+				oob += thisooblen;
+				oobcolumn = 0;
+			} else
+				oobbuf = (u_char *) ffchars;
+
+			this->write_bufferram(mtd, ONENAND_SPARERAM, oobbuf, 0, mtd->oobsize);
 		} else
-			oobbuf = (u_char *) ffchars;
+			ONENAND_SET_NEXT_BUFFERRAM(this);
 
-		this->write_bufferram(mtd, ONENAND_SPARERAM, oobbuf, 0, mtd->oobsize);
+		/*
+		 * 2 PLANE, MLC, and Flex-OneNAND doesn't support
+		 * write-while-programe feature.
+		 */
+		if (!ONENAND_IS_2PLANE(this) && !first) {
+			ONENAND_SET_PREV_BUFFERRAM(this);
 
-		this->command(mtd, ONENAND_CMD_PROG, to, mtd->writesize);
+			ret = this->wait(mtd, FL_WRITING);
 
-		ret = this->wait(mtd, FL_WRITING);
+			/* In partial page write we don't update bufferram */
+			onenand_update_bufferram(mtd, prev, !ret && !prev_subpage);
+			if (ret) {
+				written -= prevlen;
+				printk(KERN_ERR "onenand_write_ops_nolock: write filaed %d\n", ret);
+				break;
+			}
 
-		/* In partial page write we don't update bufferram */
-		onenand_update_bufferram(mtd, to, !ret && !subpage);
-		if (ONENAND_IS_2PLANE(this)) {
-			ONENAND_SET_BUFFERRAM1(this);
-			onenand_update_bufferram(mtd, to + this->writesize, !ret && !subpage);
-		}
+			if (written == len) {
+				/* Only check verify write turn on */
+				ret = onenand_verify(mtd, buf - len, to - len, len);
+				if (ret) {
+					printk(KERN_ERR "onenand_write_ops_nolock: verify failed %d\n", ret);
+					break;
+				}
+			}
 
-		if (ret) {
-			printk(KERN_ERR "onenand_write_ops_nolock: write filaed %d\n", ret);
-			break;
-		}
+			if (written == len)
+				break;
 
-		/* Only check verify write turn on */
-		ret = onenand_verify(mtd, buf, to, thislen);
-		if (ret) {
-			printk(KERN_ERR "onenand_write_ops_nolock: verify failed %d\n", ret);
-			break;
+			ONENAND_SET_NEXT_BUFFERRAM(this);
 		}
 
-		written += thislen;
+		this->command(mtd, ONENAND_CMD_PROG, to, mtd->writesize);
 
-		if (written == len)
-			break;
+		/*
+		 * 2 PLANE, MLC, and Flex-OneNAND wait here
+		 */
+		if (ONENAND_IS_2PLANE(this)) {
+			ret = this->wait(mtd, FL_WRITING);
+
+			/* In partial page write we don't update bufferram */
+			onenand_update_bufferram(mtd, to, !ret && !subpage);
+			if (ret) {
+				printk(KERN_ERR "onenand_write_ops_nolock: write filaed %d\n", ret);
+				break;
+			}
+
+			/* Only check verify write turn on */
+			ret = onenand_verify(mtd, buf, to, thislen);
+			if (ret) {
+				printk(KERN_ERR "onenand_write_ops_nolock: verify failed %d\n", ret);
+				break;
+			}
+
+			written += thislen;
+
+			if (written == len)
+				break;
+
+		} else
+			written += thislen;
 
 		column = 0;
+		prev_subpage = subpage;
+		prev = to;
+		prevlen = thislen;
 		to += thislen;
 		buf += thislen;
+		first = 0;
 	}
 
+	/* In error case, clear all bufferrams */
+	if (written != len)
+		onenand_invalidate_bufferram(mtd, to - written, len);
+
 	ops->retlen = written;
+	ops->oobretlen = oobwritten;
 
 	return ret;
 }

             reply	other threads:[~2008-11-17  8:54 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-11-17  8:54 Kyungmin Park [this message]
2008-11-18  9:03 ` [PATCH][OneNAND] Write-while-program support v2 Adrian Hunter
2008-11-21 14:03   ` [PATCH] [MTD] [OneNAND] Add write-while-program support Adrian Hunter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20081117085428.GA32430@july \
    --to=kmpark@infradead.org \
    --cc=ext-adrian.hunter@nokia.com \
    --cc=linux-mtd@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.