From: Robert Love <robert.w.love@intel.com>
To: james.bottomley@hansenpartnership.com, linux-scsi@vger.kernel.org
Cc: jgarzik@redhat.com, james.smart@emulex.com, davem@davemloft.net,
michaelc@cs.wisc.edu, jeffrey.t.kirsher@intel.com,
jeykholt@cisco.com
Subject: [PATCH 1/3] FC protocol definition header files
Date: Tue, 18 Nov 2008 14:21:02 -0800 [thread overview]
Message-ID: <20081118222101.2289.11641.stgit@fritz> (raw)
In-Reply-To: <20081118222051.2289.81361.stgit@fritz>
Signed-off-by: Robert Love <robert.w.love@intel.com>
---
include/scsi/fc/fc_els.h | 802 +++++++++++++++++++++++++++++++++++++++++++
include/scsi/fc/fc_encaps.h | 138 +++++++
include/scsi/fc/fc_fc2.h | 124 +++++++
include/scsi/fc/fc_fcoe.h | 102 +++++
include/scsi/fc/fc_fcp.h | 199 +++++++++++
include/scsi/fc/fc_fs.h | 340 ++++++++++++++++++
include/scsi/fc/fc_gs.h | 93 +++++
include/scsi/fc/fc_ns.h | 159 +++++++++
8 files changed, 1957 insertions(+), 0 deletions(-)
create mode 100644 include/scsi/fc/fc_els.h
create mode 100644 include/scsi/fc/fc_encaps.h
create mode 100644 include/scsi/fc/fc_fc2.h
create mode 100644 include/scsi/fc/fc_fcoe.h
create mode 100644 include/scsi/fc/fc_fcp.h
create mode 100644 include/scsi/fc/fc_fs.h
create mode 100644 include/scsi/fc/fc_gs.h
create mode 100644 include/scsi/fc/fc_ns.h
diff --git a/include/scsi/fc/fc_els.h b/include/scsi/fc/fc_els.h
new file mode 100644
index 0000000..af4bf0c
--- /dev/null
+++ b/include/scsi/fc/fc_els.h
@@ -0,0 +1,802 @@
+/*
+ * Copyright(c) 2007 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Maintained at www.Open-FCoE.org
+ */
+
+#ifndef _FC_ELS_H_
+#define _FC_ELS_H_
+
+/*
+ * Fibre Channel Switch - Enhanced Link Services definitions.
+ * From T11 FC-LS Rev 1.2 June 7, 2005.
+ */
+
+/*
+ * ELS Command codes - byte 0 of the frame payload
+ */
+enum fc_els_cmd {
+ ELS_LS_RJT = 0x01, /* ESL reject */
+ ELS_LS_ACC = 0x02, /* ESL Accept */
+ ELS_PLOGI = 0x03, /* N_Port login */
+ ELS_FLOGI = 0x04, /* F_Port login */
+ ELS_LOGO = 0x05, /* Logout */
+ ELS_ABTX = 0x06, /* Abort exchange - obsolete */
+ ELS_RCS = 0x07, /* read connection status */
+ ELS_RES = 0x08, /* read exchange status block */
+ ELS_RSS = 0x09, /* read sequence status block */
+ ELS_RSI = 0x0a, /* read sequence initiative */
+ ELS_ESTS = 0x0b, /* establish streaming */
+ ELS_ESTC = 0x0c, /* estimate credit */
+ ELS_ADVC = 0x0d, /* advise credit */
+ ELS_RTV = 0x0e, /* read timeout value */
+ ELS_RLS = 0x0f, /* read link error status block */
+ ELS_ECHO = 0x10, /* echo */
+ ELS_TEST = 0x11, /* test */
+ ELS_RRQ = 0x12, /* reinstate recovery qualifier */
+ ELS_REC = 0x13, /* read exchange concise */
+ ELS_SRR = 0x14, /* sequence retransmission request */
+ ELS_PRLI = 0x20, /* process login */
+ ELS_PRLO = 0x21, /* process logout */
+ ELS_SCN = 0x22, /* state change notification */
+ ELS_TPLS = 0x23, /* test process login state */
+ ELS_TPRLO = 0x24, /* third party process logout */
+ ELS_LCLM = 0x25, /* login control list mgmt (obs) */
+ ELS_GAID = 0x30, /* get alias_ID */
+ ELS_FACT = 0x31, /* fabric activate alias_id */
+ ELS_FDACDT = 0x32, /* fabric deactivate alias_id */
+ ELS_NACT = 0x33, /* N-port activate alias_id */
+ ELS_NDACT = 0x34, /* N-port deactivate alias_id */
+ ELS_QOSR = 0x40, /* quality of service request */
+ ELS_RVCS = 0x41, /* read virtual circuit status */
+ ELS_PDISC = 0x50, /* discover N_port service params */
+ ELS_FDISC = 0x51, /* discover F_port service params */
+ ELS_ADISC = 0x52, /* discover address */
+ ELS_RNC = 0x53, /* report node cap (obs) */
+ ELS_FARP_REQ = 0x54, /* FC ARP request */
+ ELS_FARP_REPL = 0x55, /* FC ARP reply */
+ ELS_RPS = 0x56, /* read port status block */
+ ELS_RPL = 0x57, /* read port list */
+ ELS_RPBC = 0x58, /* read port buffer condition */
+ ELS_FAN = 0x60, /* fabric address notification */
+ ELS_RSCN = 0x61, /* registered state change notification */
+ ELS_SCR = 0x62, /* state change registration */
+ ELS_RNFT = 0x63, /* report node FC-4 types */
+ ELS_CSR = 0x68, /* clock synch. request */
+ ELS_CSU = 0x69, /* clock synch. update */
+ ELS_LINIT = 0x70, /* loop initialize */
+ ELS_LSTS = 0x72, /* loop status */
+ ELS_RNID = 0x78, /* request node ID data */
+ ELS_RLIR = 0x79, /* registered link incident report */
+ ELS_LIRR = 0x7a, /* link incident record registration */
+ ELS_SRL = 0x7b, /* scan remote loop */
+ ELS_SBRP = 0x7c, /* set bit-error reporting params */
+ ELS_RPSC = 0x7d, /* report speed capabilities */
+ ELS_QSA = 0x7e, /* query security attributes */
+ ELS_EVFP = 0x7f, /* exchange virt. fabrics params */
+ ELS_LKA = 0x80, /* link keep-alive */
+ ELS_AUTH_ELS = 0x90, /* authentication ELS */
+};
+
+/*
+ * Initializer useful for decoding table.
+ * Please keep this in sync with the above definitions.
+ */
+#define FC_ELS_CMDS_INIT { \
+ [ELS_LS_RJT] = "LS_RJT", \
+ [ELS_LS_ACC] = "LS_ACC", \
+ [ELS_PLOGI] = "PLOGI", \
+ [ELS_FLOGI] = "FLOGI", \
+ [ELS_LOGO] = "LOGO", \
+ [ELS_ABTX] = "ABTX", \
+ [ELS_RCS] = "RCS", \
+ [ELS_RES] = "RES", \
+ [ELS_RSS] = "RSS", \
+ [ELS_RSI] = "RSI", \
+ [ELS_ESTS] = "ESTS", \
+ [ELS_ESTC] = "ESTC", \
+ [ELS_ADVC] = "ADVC", \
+ [ELS_RTV] = "RTV", \
+ [ELS_RLS] = "RLS", \
+ [ELS_ECHO] = "ECHO", \
+ [ELS_TEST] = "TEST", \
+ [ELS_RRQ] = "RRQ", \
+ [ELS_REC] = "REC", \
+ [ELS_SRR] = "SRR", \
+ [ELS_PRLI] = "PRLI", \
+ [ELS_PRLO] = "PRLO", \
+ [ELS_SCN] = "SCN", \
+ [ELS_TPLS] = "TPLS", \
+ [ELS_TPRLO] = "TPRLO", \
+ [ELS_LCLM] = "LCLM", \
+ [ELS_GAID] = "GAID", \
+ [ELS_FACT] = "FACT", \
+ [ELS_FDACDT] = "FDACDT", \
+ [ELS_NACT] = "NACT", \
+ [ELS_NDACT] = "NDACT", \
+ [ELS_QOSR] = "QOSR", \
+ [ELS_RVCS] = "RVCS", \
+ [ELS_PDISC] = "PDISC", \
+ [ELS_FDISC] = "FDISC", \
+ [ELS_ADISC] = "ADISC", \
+ [ELS_RNC] = "RNC", \
+ [ELS_FARP_REQ] = "FARP_REQ", \
+ [ELS_FARP_REPL] = "FARP_REPL", \
+ [ELS_RPS] = "RPS", \
+ [ELS_RPL] = "RPL", \
+ [ELS_RPBC] = "RPBC", \
+ [ELS_FAN] = "FAN", \
+ [ELS_RSCN] = "RSCN", \
+ [ELS_SCR] = "SCR", \
+ [ELS_RNFT] = "RNFT", \
+ [ELS_CSR] = "CSR", \
+ [ELS_CSU] = "CSU", \
+ [ELS_LINIT] = "LINIT", \
+ [ELS_LSTS] = "LSTS", \
+ [ELS_RNID] = "RNID", \
+ [ELS_RLIR] = "RLIR", \
+ [ELS_LIRR] = "LIRR", \
+ [ELS_SRL] = "SRL", \
+ [ELS_SBRP] = "SBRP", \
+ [ELS_RPSC] = "RPSC", \
+ [ELS_QSA] = "QSA", \
+ [ELS_EVFP] = "EVFP", \
+ [ELS_LKA] = "LKA", \
+ [ELS_AUTH_ELS] = "AUTH_ELS", \
+}
+
+/*
+ * LS_ACC payload.
+ */
+struct fc_els_ls_acc {
+ __u8 la_cmd; /* command code ELS_LS_ACC */
+ __u8 la_resv[3]; /* reserved */
+};
+
+/*
+ * ELS reject payload.
+ */
+struct fc_els_ls_rjt {
+ __u8 er_cmd; /* command code ELS_LS_RJT */
+ __u8 er_resv[4]; /* reserved must be zero */
+ __u8 er_reason; /* reason (enum fc_els_rjt_reason below) */
+ __u8 er_explan; /* explanation (enum fc_els_rjt_explan below) */
+ __u8 er_vendor; /* vendor specific code */
+};
+
+/*
+ * ELS reject reason codes (er_reason).
+ */
+enum fc_els_rjt_reason {
+ ELS_RJT_NONE = 0, /* no reject - not to be sent */
+ ELS_RJT_INVAL = 0x01, /* invalid ELS command code */
+ ELS_RJT_LOGIC = 0x03, /* logical error */
+ ELS_RJT_BUSY = 0x05, /* logical busy */
+ ELS_RJT_PROT = 0x07, /* protocol error */
+ ELS_RJT_UNAB = 0x09, /* unable to perform command request */
+ ELS_RJT_UNSUP = 0x0b, /* command not supported */
+ ELS_RJT_INPROG = 0x0e, /* command already in progress */
+ ELS_RJT_VENDOR = 0xff, /* vendor specific error */
+};
+
+
+/*
+ * reason code explanation (er_explan).
+ */
+enum fc_els_rjt_explan {
+ ELS_EXPL_NONE = 0x00, /* No additional explanation */
+ ELS_EXPL_SPP_OPT_ERR = 0x01, /* service parameter error - options */
+ ELS_EXPL_SPP_ICTL_ERR = 0x03, /* service parm error - initiator ctl */
+ ELS_EXPL_AH = 0x11, /* invalid association header */
+ ELS_EXPL_AH_REQ = 0x13, /* association_header required */
+ ELS_EXPL_SID = 0x15, /* invalid originator S_ID */
+ ELS_EXPL_OXID_RXID = 0x17, /* invalid OX_ID-RX_ID combination */
+ ELS_EXPL_INPROG = 0x19, /* Request already in progress */
+ ELS_EXPL_PLOGI_REQD = 0x1e, /* N_Port login required */
+ ELS_EXPL_INSUF_RES = 0x29, /* insufficient resources */
+ ELS_EXPL_UNAB_DATA = 0x2a, /* unable to supply requested data */
+ ELS_EXPL_UNSUPR = 0x2c, /* Request not supported */
+ ELS_EXPL_INV_LEN = 0x2d, /* Invalid payload length */
+ /* TBD - above definitions incomplete */
+};
+
+/*
+ * Common service parameters (N ports).
+ */
+struct fc_els_csp {
+ __u8 sp_hi_ver; /* highest version supported (obs.) */
+ __u8 sp_lo_ver; /* highest version supported (obs.) */
+ __be16 sp_bb_cred; /* buffer-to-buffer credits */
+ __be16 sp_features; /* common feature flags */
+ __be16 sp_bb_data; /* b-b state number and data field sz */
+ union {
+ struct {
+ __be16 _sp_tot_seq; /* total concurrent sequences */
+ __be16 _sp_rel_off; /* rel. offset by info cat */
+ } sp_plogi;
+ struct {
+ __be32 _sp_r_a_tov; /* resource alloc. timeout msec */
+ } sp_flogi_acc;
+ } sp_u;
+ __be32 sp_e_d_tov; /* error detect timeout value */
+};
+#define sp_tot_seq sp_u.sp_plogi._sp_tot_seq
+#define sp_rel_off sp_u.sp_plogi._sp_rel_off
+#define sp_r_a_tov sp_u.sp_flogi_acc._sp_r_a_tov
+
+#define FC_SP_BB_DATA_MASK 0xfff /* mask for data field size in sp_bb_data */
+
+/*
+ * Minimum and maximum values for max data field size in service parameters.
+ */
+#define FC_SP_MIN_MAX_PAYLOAD FC_MIN_MAX_PAYLOAD
+#define FC_SP_MAX_MAX_PAYLOAD FC_MAX_PAYLOAD
+
+/*
+ * sp_features
+ */
+#define FC_SP_FT_CIRO 0x8000 /* continuously increasing rel. off. */
+#define FC_SP_FT_CLAD 0x8000 /* clean address (in FLOGI LS_ACC) */
+#define FC_SP_FT_RAND 0x4000 /* random relative offset */
+#define FC_SP_FT_VAL 0x2000 /* valid vendor version level */
+#define FC_SP_FT_FPORT 0x1000 /* F port (1) vs. N port (0) */
+#define FC_SP_FT_ABB 0x0800 /* alternate BB_credit management */
+#define FC_SP_FT_EDTR 0x0400 /* E_D_TOV Resolution is nanoseconds */
+#define FC_SP_FT_MCAST 0x0200 /* multicast */
+#define FC_SP_FT_BCAST 0x0100 /* broadcast */
+#define FC_SP_FT_HUNT 0x0080 /* hunt group */
+#define FC_SP_FT_SIMP 0x0040 /* dedicated simplex */
+#define FC_SP_FT_SEC 0x0020 /* reserved for security */
+#define FC_SP_FT_CSYN 0x0010 /* clock synch. supported */
+#define FC_SP_FT_RTTOV 0x0008 /* R_T_TOV value 100 uS, else 100 mS */
+#define FC_SP_FT_HALF 0x0004 /* dynamic half duplex */
+#define FC_SP_FT_SEQC 0x0002 /* SEQ_CNT */
+#define FC_SP_FT_PAYL 0x0001 /* FLOGI payload length 256, else 116 */
+
+/*
+ * Class-specific service parameters.
+ */
+struct fc_els_cssp {
+ __be16 cp_class; /* class flags */
+ __be16 cp_init; /* initiator flags */
+ __be16 cp_recip; /* recipient flags */
+ __be16 cp_rdfs; /* receive data field size */
+ __be16 cp_con_seq; /* concurrent sequences */
+ __be16 cp_ee_cred; /* N-port end-to-end credit */
+ __u8 cp_resv1; /* reserved */
+ __u8 cp_open_seq; /* open sequences per exchange */
+ __u8 _cp_resv2[2]; /* reserved */
+};
+
+/*
+ * cp_class flags.
+ */
+#define FC_CPC_VALID 0x8000 /* class valid */
+#define FC_CPC_IMIX 0x4000 /* intermix mode */
+#define FC_CPC_SEQ 0x0800 /* sequential delivery */
+#define FC_CPC_CAMP 0x0200 /* camp-on */
+#define FC_CPC_PRI 0x0080 /* priority */
+
+/*
+ * cp_init flags.
+ * (TBD: not all flags defined here).
+ */
+#define FC_CPI_CSYN 0x0010 /* clock synch. capable */
+
+/*
+ * cp_recip flags.
+ */
+#define FC_CPR_CSYN 0x0008 /* clock synch. capable */
+
+/*
+ * NFC_ELS_FLOGI: Fabric login request.
+ * NFC_ELS_PLOGI: Port login request (same format).
+ */
+struct fc_els_flogi {
+ __u8 fl_cmd; /* command */
+ __u8 _fl_resvd[3]; /* must be zero */
+ struct fc_els_csp fl_csp; /* common service parameters */
+ __be64 fl_wwpn; /* port name */
+ __be64 fl_wwnn; /* node name */
+ struct fc_els_cssp fl_cssp[4]; /* class 1-4 service parameters */
+ __u8 fl_vend[16]; /* vendor version level */
+} __attribute__((__packed__));
+
+/*
+ * Process login service parameter page.
+ */
+struct fc_els_spp {
+ __u8 spp_type; /* type code or common service params */
+ __u8 spp_type_ext; /* type code extension */
+ __u8 spp_flags;
+ __u8 _spp_resvd;
+ __be32 spp_orig_pa; /* originator process associator */
+ __be32 spp_resp_pa; /* responder process associator */
+ __be32 spp_params; /* service parameters */
+};
+
+/*
+ * spp_flags.
+ */
+#define FC_SPP_OPA_VAL 0x80 /* originator proc. assoc. valid */
+#define FC_SPP_RPA_VAL 0x40 /* responder proc. assoc. valid */
+#define FC_SPP_EST_IMG_PAIR 0x20 /* establish image pair */
+#define FC_SPP_RESP_MASK 0x0f /* mask for response code (below) */
+
+/*
+ * SPP response code in spp_flags - lower 4 bits.
+ */
+enum fc_els_spp_resp {
+ FC_SPP_RESP_ACK = 1, /* request executed */
+ FC_SPP_RESP_RES = 2, /* unable due to lack of resources */
+ FC_SPP_RESP_INIT = 3, /* initialization not complete */
+ FC_SPP_RESP_NO_PA = 4, /* unknown process associator */
+ FC_SPP_RESP_CONF = 5, /* configuration precludes image pair */
+ FC_SPP_RESP_COND = 6, /* request completed conditionally */
+ FC_SPP_RESP_MULT = 7, /* unable to handle multiple SPPs */
+ FC_SPP_RESP_INVL = 8, /* SPP is invalid */
+};
+
+/*
+ * ELS_RRQ - Reinstate Recovery Qualifier
+ */
+struct fc_els_rrq {
+ __u8 rrq_cmd; /* command (0x12) */
+ __u8 rrq_zero[3]; /* specified as zero - part of cmd */
+ __u8 rrq_resvd; /* reserved */
+ __u8 rrq_s_id[3]; /* originator FID */
+ __be16 rrq_ox_id; /* originator exchange ID */
+ __be16 rrq_rx_id; /* responders exchange ID */
+};
+
+/*
+ * ELS_REC - Read exchange concise.
+ */
+struct fc_els_rec {
+ __u8 rec_cmd; /* command (0x13) */
+ __u8 rec_zero[3]; /* specified as zero - part of cmd */
+ __u8 rec_resvd; /* reserved */
+ __u8 rec_s_id[3]; /* originator FID */
+ __be16 rec_ox_id; /* originator exchange ID */
+ __be16 rec_rx_id; /* responders exchange ID */
+};
+
+/*
+ * ELS_REC LS_ACC payload.
+ */
+struct fc_els_rec_acc {
+ __u8 reca_cmd; /* accept (0x02) */
+ __u8 reca_zero[3]; /* specified as zero - part of cmd */
+ __be16 reca_ox_id; /* originator exchange ID */
+ __be16 reca_rx_id; /* responders exchange ID */
+ __u8 reca_resvd1; /* reserved */
+ __u8 reca_ofid[3]; /* originator FID */
+ __u8 reca_resvd2; /* reserved */
+ __u8 reca_rfid[3]; /* responder FID */
+ __be32 reca_fc4value; /* FC4 value */
+ __be32 reca_e_stat; /* ESB (exchange status block) status */
+};
+
+/*
+ * ELS_PRLI - Process login request and response.
+ */
+struct fc_els_prli {
+ __u8 prli_cmd; /* command */
+ __u8 prli_spp_len; /* length of each serv. parm. page */
+ __be16 prli_len; /* length of entire payload */
+ /* service parameter pages follow */
+};
+
+/*
+ * ELS_LOGO - process or fabric logout.
+ */
+struct fc_els_logo {
+ __u8 fl_cmd; /* command code */
+ __u8 fl_zero[3]; /* specified as zero - part of cmd */
+ __u8 fl_resvd; /* reserved */
+ __u8 fl_n_port_id[3];/* N port ID */
+ __be64 fl_n_port_wwn; /* port name */
+};
+
+/*
+ * ELS_RTV - read timeout value.
+ */
+struct fc_els_rtv {
+ __u8 rtv_cmd; /* command code 0x0e */
+ __u8 rtv_zero[3]; /* specified as zero - part of cmd */
+};
+
+/*
+ * LS_ACC for ELS_RTV - read timeout value.
+ */
+struct fc_els_rtv_acc {
+ __u8 rtv_cmd; /* command code 0x02 */
+ __u8 rtv_zero[3]; /* specified as zero - part of cmd */
+ __be32 rtv_r_a_tov; /* resource allocation timeout value */
+ __be32 rtv_e_d_tov; /* error detection timeout value */
+ __be32 rtv_toq; /* timeout qualifier (see below) */
+};
+
+/*
+ * rtv_toq bits.
+ */
+#define FC_ELS_RTV_EDRES (1 << 26) /* E_D_TOV resolution is nS else mS */
+#define FC_ELS_RTV_RTTOV (1 << 19) /* R_T_TOV is 100 uS else 100 mS */
+
+/*
+ * ELS_SCR - state change registration payload.
+ */
+struct fc_els_scr {
+ __u8 scr_cmd; /* command code */
+ __u8 scr_resv[6]; /* reserved */
+ __u8 scr_reg_func; /* registration function (see below) */
+};
+
+enum fc_els_scr_func {
+ ELS_SCRF_FAB = 1, /* fabric-detected registration */
+ ELS_SCRF_NPORT = 2, /* Nx_Port-detected registration */
+ ELS_SCRF_FULL = 3, /* full registration */
+ ELS_SCRF_CLEAR = 255, /* remove any current registrations */
+};
+
+/*
+ * ELS_RSCN - registered state change notification payload.
+ */
+struct fc_els_rscn {
+ __u8 rscn_cmd; /* RSCN opcode (0x61) */
+ __u8 rscn_page_len; /* page length (4) */
+ __be16 rscn_plen; /* payload length including this word */
+
+ /* followed by 4-byte generic affected Port_ID pages */
+};
+
+struct fc_els_rscn_page {
+ __u8 rscn_page_flags; /* event and address format */
+ __u8 rscn_fid[3]; /* fabric ID */
+};
+
+#define ELS_RSCN_EV_QUAL_BIT 2 /* shift count for event qualifier */
+#define ELS_RSCN_EV_QUAL_MASK 0xf /* mask for event qualifier */
+#define ELS_RSCN_ADDR_FMT_BIT 0 /* shift count for address format */
+#define ELS_RSCN_ADDR_FMT_MASK 0x3 /* mask for address format */
+
+enum fc_els_rscn_ev_qual {
+ ELS_EV_QUAL_NONE = 0, /* unspecified */
+ ELS_EV_QUAL_NS_OBJ = 1, /* changed name server object */
+ ELS_EV_QUAL_PORT_ATTR = 2, /* changed port attribute */
+ ELS_EV_QUAL_SERV_OBJ = 3, /* changed service object */
+ ELS_EV_QUAL_SW_CONFIG = 4, /* changed switch configuration */
+ ELS_EV_QUAL_REM_OBJ = 5, /* removed object */
+};
+
+enum fc_els_rscn_addr_fmt {
+ ELS_ADDR_FMT_PORT = 0, /* rscn_fid is a port address */
+ ELS_ADDR_FMT_AREA = 1, /* rscn_fid is a area address */
+ ELS_ADDR_FMT_DOM = 2, /* rscn_fid is a domain address */
+ ELS_ADDR_FMT_FAB = 3, /* anything on fabric may have changed */
+};
+
+/*
+ * ELS_RNID - request Node ID.
+ */
+struct fc_els_rnid {
+ __u8 rnid_cmd; /* RNID opcode (0x78) */
+ __u8 rnid_resv[3]; /* reserved */
+ __u8 rnid_fmt; /* data format */
+ __u8 rnid_resv2[3]; /* reserved */
+};
+
+/*
+ * Node Identification Data formats (rnid_fmt)
+ */
+enum fc_els_rnid_fmt {
+ ELS_RNIDF_NONE = 0, /* no specific identification data */
+ ELS_RNIDF_GEN = 0xdf, /* general topology discovery format */
+};
+
+/*
+ * ELS_RNID response.
+ */
+struct fc_els_rnid_resp {
+ __u8 rnid_cmd; /* response code (LS_ACC) */
+ __u8 rnid_resv[3]; /* reserved */
+ __u8 rnid_fmt; /* data format */
+ __u8 rnid_cid_len; /* common ID data length */
+ __u8 rnid_resv2; /* reserved */
+ __u8 rnid_sid_len; /* specific ID data length */
+};
+
+struct fc_els_rnid_cid {
+ __be64 rnid_wwpn; /* N port name */
+ __be64 rnid_wwnn; /* node name */
+};
+
+struct fc_els_rnid_gen {
+ __u8 rnid_vend_id[16]; /* vendor-unique ID */
+ __be32 rnid_atype; /* associated type (see below) */
+ __be32 rnid_phys_port; /* physical port number */
+ __be32 rnid_att_nodes; /* number of attached nodes */
+ __u8 rnid_node_mgmt; /* node management (see below) */
+ __u8 rnid_ip_ver; /* IP version (see below) */
+ __be16 rnid_prot_port; /* UDP / TCP port number */
+ __be32 rnid_ip_addr[4]; /* IP address */
+ __u8 rnid_resvd[2]; /* reserved */
+ __be16 rnid_vend_spec; /* vendor-specific field */
+};
+
+enum fc_els_rnid_atype {
+ ELS_RNIDA_UNK = 0x01, /* unknown */
+ ELS_RNIDA_OTHER = 0x02, /* none of the following */
+ ELS_RNIDA_HUB = 0x03,
+ ELS_RNIDA_SWITCH = 0x04,
+ ELS_RNIDA_GATEWAY = 0x05,
+ ELS_RNIDA_CONV = 0x06, /* Obsolete, do not use this value */
+ ELS_RNIDA_HBA = 0x07, /* Obsolete, do not use this value */
+ ELS_RNIDA_PROXY = 0x08, /* Obsolete, do not use this value */
+ ELS_RNIDA_STORAGE = 0x09,
+ ELS_RNIDA_HOST = 0x0a,
+ ELS_RNIDA_SUBSYS = 0x0b, /* storage subsystem (e.g., RAID) */
+ ELS_RNIDA_ACCESS = 0x0e, /* access device (e.g. media changer) */
+ ELS_RNIDA_NAS = 0x11, /* NAS server */
+ ELS_RNIDA_BRIDGE = 0x12, /* bridge */
+ ELS_RNIDA_VIRT = 0x13, /* virtualization device */
+ ELS_RNIDA_MF = 0xff, /* multifunction device (bits below) */
+ ELS_RNIDA_MF_HUB = 1UL << 31, /* hub */
+ ELS_RNIDA_MF_SW = 1UL << 30, /* switch */
+ ELS_RNIDA_MF_GW = 1UL << 29, /* gateway */
+ ELS_RNIDA_MF_ST = 1UL << 28, /* storage */
+ ELS_RNIDA_MF_HOST = 1UL << 27, /* host */
+ ELS_RNIDA_MF_SUB = 1UL << 26, /* storage subsystem */
+ ELS_RNIDA_MF_ACC = 1UL << 25, /* storage access dev */
+ ELS_RNIDA_MF_WDM = 1UL << 24, /* wavelength division mux */
+ ELS_RNIDA_MF_NAS = 1UL << 23, /* NAS server */
+ ELS_RNIDA_MF_BR = 1UL << 22, /* bridge */
+ ELS_RNIDA_MF_VIRT = 1UL << 21, /* virtualization device */
+};
+
+enum fc_els_rnid_mgmt {
+ ELS_RNIDM_SNMP = 0,
+ ELS_RNIDM_TELNET = 1,
+ ELS_RNIDM_HTTP = 2,
+ ELS_RNIDM_HTTPS = 3,
+ ELS_RNIDM_XML = 4, /* HTTP + XML */
+};
+
+enum fc_els_rnid_ipver {
+ ELS_RNIDIP_NONE = 0, /* no IP support or node mgmt. */
+ ELS_RNIDIP_V4 = 1, /* IPv4 */
+ ELS_RNIDIP_V6 = 2, /* IPv6 */
+};
+
+/*
+ * ELS RPL - Read Port List.
+ */
+struct fc_els_rpl {
+ __u8 rpl_cmd; /* command */
+ __u8 rpl_resv[5]; /* reserved - must be zero */
+ __be16 rpl_max_size; /* maximum response size or zero */
+ __u8 rpl_resv1; /* reserved - must be zero */
+ __u8 rpl_index[3]; /* starting index */
+};
+
+/*
+ * Port number block in RPL response.
+ */
+struct fc_els_pnb {
+ __be32 pnb_phys_pn; /* physical port number */
+ __u8 pnb_resv; /* reserved */
+ __u8 pnb_port_id[3]; /* port ID */
+ __be64 pnb_wwpn; /* port name */
+};
+
+/*
+ * RPL LS_ACC response.
+ */
+struct fc_els_rpl_resp {
+ __u8 rpl_cmd; /* ELS_LS_ACC */
+ __u8 rpl_resv1; /* reserved - must be zero */
+ __be16 rpl_plen; /* payload length */
+ __u8 rpl_resv2; /* reserved - must be zero */
+ __u8 rpl_llen[3]; /* list length */
+ __u8 rpl_resv3; /* reserved - must be zero */
+ __u8 rpl_index[3]; /* starting index */
+ struct fc_els_pnb rpl_pnb[1]; /* variable number of PNBs */
+};
+
+/*
+ * Link Error Status Block.
+ */
+struct fc_els_lesb {
+ __be32 lesb_link_fail; /* link failure count */
+ __be32 lesb_sync_loss; /* loss of synchronization count */
+ __be32 lesb_sig_loss; /* loss of signal count */
+ __be32 lesb_prim_err; /* primitive sequence error count */
+ __be32 lesb_inv_word; /* invalid transmission word count */
+ __be32 lesb_inv_crc; /* invalid CRC count */
+};
+
+/*
+ * ELS RPS - Read Port Status Block request.
+ */
+struct fc_els_rps {
+ __u8 rps_cmd; /* command */
+ __u8 rps_resv[2]; /* reserved - must be zero */
+ __u8 rps_flag; /* flag - see below */
+ __be64 rps_port_spec; /* port selection */
+};
+
+enum fc_els_rps_flag {
+ FC_ELS_RPS_DID = 0x00, /* port identified by D_ID of req. */
+ FC_ELS_RPS_PPN = 0x01, /* port_spec is physical port number */
+ FC_ELS_RPS_WWPN = 0x02, /* port_spec is port WWN */
+};
+
+/*
+ * ELS RPS LS_ACC response.
+ */
+struct fc_els_rps_resp {
+ __u8 rps_cmd; /* command - LS_ACC */
+ __u8 rps_resv[2]; /* reserved - must be zero */
+ __u8 rps_flag; /* flag - see below */
+ __u8 rps_resv2[2]; /* reserved */
+ __be16 rps_status; /* port status - see below */
+ struct fc_els_lesb rps_lesb; /* link error status block */
+};
+
+enum fc_els_rps_resp_flag {
+ FC_ELS_RPS_LPEV = 0x01, /* L_port extension valid */
+};
+
+enum fc_els_rps_resp_status {
+ FC_ELS_RPS_PTP = 1 << 5, /* point-to-point connection */
+ FC_ELS_RPS_LOOP = 1 << 4, /* loop mode */
+ FC_ELS_RPS_FAB = 1 << 3, /* fabric present */
+ FC_ELS_RPS_NO_SIG = 1 << 2, /* loss of signal */
+ FC_ELS_RPS_NO_SYNC = 1 << 1, /* loss of synchronization */
+ FC_ELS_RPS_RESET = 1 << 0, /* in link reset protocol */
+};
+
+/*
+ * ELS LIRR - Link Incident Record Registration request.
+ */
+struct fc_els_lirr {
+ __u8 lirr_cmd; /* command */
+ __u8 lirr_resv[3]; /* reserved - must be zero */
+ __u8 lirr_func; /* registration function */
+ __u8 lirr_fmt; /* FC-4 type of RLIR requested */
+ __u8 lirr_resv2[2]; /* reserved - must be zero */
+};
+
+enum fc_els_lirr_func {
+ ELS_LIRR_SET_COND = 0x01, /* set - conditionally receive */
+ ELS_LIRR_SET_UNCOND = 0x02, /* set - unconditionally receive */
+ ELS_LIRR_CLEAR = 0xff /* clear registration */
+};
+
+/*
+ * ELS SRL - Scan Remote Loop request.
+ */
+struct fc_els_srl {
+ __u8 srl_cmd; /* command */
+ __u8 srl_resv[3]; /* reserved - must be zero */
+ __u8 srl_flag; /* flag - see below */
+ __u8 srl_flag_param[3]; /* flag parameter */
+};
+
+enum fc_els_srl_flag {
+ FC_ELS_SRL_ALL = 0x00, /* scan all FL ports */
+ FC_ELS_SRL_ONE = 0x01, /* scan specified loop */
+ FC_ELS_SRL_EN_PER = 0x02, /* enable periodic scanning (param) */
+ FC_ELS_SRL_DIS_PER = 0x03, /* disable periodic scanning */
+};
+
+/*
+ * ELS RLS - Read Link Error Status Block request.
+ */
+struct fc_els_rls {
+ __u8 rls_cmd; /* command */
+ __u8 rls_resv[4]; /* reserved - must be zero */
+ __u8 rls_port_id[3]; /* port ID */
+};
+
+/*
+ * ELS RLS LS_ACC Response.
+ */
+struct fc_els_rls_resp {
+ __u8 rls_cmd; /* ELS_LS_ACC */
+ __u8 rls_resv[3]; /* reserved - must be zero */
+ struct fc_els_lesb rls_lesb; /* link error status block */
+};
+
+/*
+ * ELS RLIR - Registered Link Incident Report.
+ * This is followed by the CLIR and the CLID, described below.
+ */
+struct fc_els_rlir {
+ __u8 rlir_cmd; /* command */
+ __u8 rlir_resv[3]; /* reserved - must be zero */
+ __u8 rlir_fmt; /* format (FC4-type if type specific) */
+ __u8 rlir_clr_len; /* common link incident record length */
+ __u8 rlir_cld_len; /* common link incident desc. length */
+ __u8 rlir_slr_len; /* spec. link incident record length */
+};
+
+/*
+ * CLIR - Common Link Incident Record Data. - Sent via RLIR.
+ */
+struct fc_els_clir {
+ __be64 clir_wwpn; /* incident port name */
+ __be64 clir_wwnn; /* incident port node name */
+ __u8 clir_port_type; /* incident port type */
+ __u8 clir_port_id[3]; /* incident port ID */
+
+ __be64 clir_conn_wwpn; /* connected port name */
+ __be64 clir_conn_wwnn; /* connected node name */
+ __be64 clir_fab_name; /* fabric name */
+ __be32 clir_phys_port; /* physical port number */
+ __be32 clir_trans_id; /* transaction ID */
+ __u8 clir_resv[3]; /* reserved */
+ __u8 clir_ts_fmt; /* time stamp format */
+ __be64 clir_timestamp; /* time stamp */
+};
+
+/*
+ * CLIR clir_ts_fmt - time stamp format values.
+ */
+enum fc_els_clir_ts_fmt {
+ ELS_CLIR_TS_UNKNOWN = 0, /* time stamp field unknown */
+ ELS_CLIR_TS_SEC_FRAC = 1, /* time in seconds and fractions */
+ ELS_CLIR_TS_CSU = 2, /* time in clock synch update format */
+};
+
+/*
+ * Common Link Incident Descriptor - sent via RLIR.
+ */
+struct fc_els_clid {
+ __u8 clid_iq; /* incident qualifier flags */
+ __u8 clid_ic; /* incident code */
+ __be16 clid_epai; /* domain/area of ISL */
+};
+
+/*
+ * CLID incident qualifier flags.
+ */
+enum fc_els_clid_iq {
+ ELS_CLID_SWITCH = 0x20, /* incident port is a switch node */
+ ELS_CLID_E_PORT = 0x10, /* incident is an ISL (E) port */
+ ELS_CLID_SEV_MASK = 0x0c, /* severity 2-bit field mask */
+ ELS_CLID_SEV_INFO = 0x00, /* report is informational */
+ ELS_CLID_SEV_INOP = 0x08, /* link not operational */
+ ELS_CLID_SEV_DEG = 0x04, /* link degraded but operational */
+ ELS_CLID_LASER = 0x02, /* subassembly is a laser */
+ ELS_CLID_FRU = 0x01, /* format can identify a FRU */
+};
+
+/*
+ * CLID incident code.
+ */
+enum fc_els_clid_ic {
+ ELS_CLID_IC_IMPL = 1, /* implicit incident */
+ ELS_CLID_IC_BER = 2, /* bit-error-rate threshold exceeded */
+ ELS_CLID_IC_LOS = 3, /* loss of synch or signal */
+ ELS_CLID_IC_NOS = 4, /* non-operational primitive sequence */
+ ELS_CLID_IC_PST = 5, /* primitive sequence timeout */
+ ELS_CLID_IC_INVAL = 6, /* invalid primitive sequence */
+ ELS_CLID_IC_LOOP_TO = 7, /* loop initialization time out */
+ ELS_CLID_IC_LIP = 8, /* receiving LIP */
+};
+
+#endif /* _FC_ELS_H_ */
diff --git a/include/scsi/fc/fc_encaps.h b/include/scsi/fc/fc_encaps.h
new file mode 100644
index 0000000..f180c3e
--- /dev/null
+++ b/include/scsi/fc/fc_encaps.h
@@ -0,0 +1,138 @@
+/*
+ * Copyright(c) 2007 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Maintained at www.Open-FCoE.org
+ */
+#ifndef _FC_ENCAPS_H_
+#define _FC_ENCAPS_H_
+
+/*
+ * Protocol definitions from RFC 3643 - Fibre Channel Frame Encapsulation.
+ *
+ * Note: The frame length field is the number of 32-bit words in
+ * the encapsulation including the fcip_encaps_header, CRC and EOF words.
+ * The minimum frame length value in bytes is (32 + 24 + 4 + 4) * 4 = 64.
+ * The maximum frame length value in bytes is (32 + 24 + 2112 + 4 + 4) = 2172.
+ */
+#define FC_ENCAPS_MIN_FRAME_LEN 64 /* min frame len (bytes) (see above) */
+#define FC_ENCAPS_MAX_FRAME_LEN (FC_ENCAPS_MIN_FRAME_LEN + FC_MAX_PAYLOAD)
+
+#define FC_ENCAPS_VER 1 /* current version number */
+
+struct fc_encaps_hdr {
+ __u8 fc_proto; /* protocol number */
+ __u8 fc_ver; /* version of encapsulation */
+ __u8 fc_proto_n; /* ones complement of protocol */
+ __u8 fc_ver_n; /* ones complement of version */
+
+ unsigned char fc_proto_data[8]; /* protocol specific data */
+
+ __be16 fc_len_flags; /* 10-bit length/4 w/ 6 flag bits */
+ __be16 fc_len_flags_n; /* ones complement of length / flags */
+
+ /*
+ * Offset 0x10
+ */
+ __be32 fc_time[2]; /* time stamp: seconds and fraction */
+ __be32 fc_crc; /* CRC */
+ __be32 fc_sof; /* start of frame (see FC_SOF below) */
+
+ /* 0x20 - FC frame content followed by EOF word */
+};
+
+#define FCIP_ENCAPS_HDR_LEN 0x20 /* expected length for asserts */
+
+/*
+ * Macro's for making redundant copies of EOF and SOF.
+ */
+#define FC_XY(x, y) ((((x) & 0xff) << 8) | ((y) & 0xff))
+#define FC_XYXY(x, y) ((FCIP_XY(x, y) << 16) | FCIP_XY(x, y))
+#define FC_XYNN(x, y) (FCIP_XYXY(x, y) ^ 0xffff)
+
+#define FC_SOF_ENCODE(n) FC_XYNN(n, n)
+#define FC_EOF_ENCODE(n) FC_XYNN(n, n)
+
+/*
+ * SOF / EOF bytes.
+ */
+enum fc_sof {
+ FC_SOF_F = 0x28, /* fabric */
+ FC_SOF_I4 = 0x29, /* initiate class 4 */
+ FC_SOF_I2 = 0x2d, /* initiate class 2 */
+ FC_SOF_I3 = 0x2e, /* initiate class 3 */
+ FC_SOF_N4 = 0x31, /* normal class 4 */
+ FC_SOF_N2 = 0x35, /* normal class 2 */
+ FC_SOF_N3 = 0x36, /* normal class 3 */
+ FC_SOF_C4 = 0x39, /* activate class 4 */
+} __attribute__((packed));
+
+enum fc_eof {
+ FC_EOF_N = 0x41, /* normal (not last frame of seq) */
+ FC_EOF_T = 0x42, /* terminate (last frame of sequence) */
+ FC_EOF_RT = 0x44,
+ FC_EOF_DT = 0x46, /* disconnect-terminate class-1 */
+ FC_EOF_NI = 0x49, /* normal-invalid */
+ FC_EOF_DTI = 0x4e, /* disconnect-terminate-invalid */
+ FC_EOF_RTI = 0x4f,
+ FC_EOF_A = 0x50, /* abort */
+} __attribute__((packed));
+
+#define FC_SOF_CLASS_MASK 0x06 /* mask for class of service in SOF */
+
+/*
+ * Define classes in terms of the SOF code (initial).
+ */
+enum fc_class {
+ FC_CLASS_NONE = 0, /* software value indicating no class */
+ FC_CLASS_2 = FC_SOF_I2,
+ FC_CLASS_3 = FC_SOF_I3,
+ FC_CLASS_4 = FC_SOF_I4,
+ FC_CLASS_F = FC_SOF_F,
+};
+
+/*
+ * Determine whether SOF code indicates the need for a BLS ACK.
+ */
+static inline int fc_sof_needs_ack(enum fc_sof sof)
+{
+ return (~sof) & 0x02; /* true for class 1, 2, 4, 6, or F */
+}
+
+/*
+ * Given an fc_class, return the normal (non-initial) SOF value.
+ */
+static inline enum fc_sof fc_sof_normal(enum fc_class class)
+{
+ return class + FC_SOF_N3 - FC_SOF_I3; /* diff is always 8 */
+}
+
+/*
+ * Compute class from SOF value.
+ */
+static inline enum fc_class fc_sof_class(enum fc_sof sof)
+{
+ return (sof & 0x7) | FC_SOF_F;
+}
+
+/*
+ * Determine whether SOF is for the initial frame of a sequence.
+ */
+static inline int fc_sof_is_init(enum fc_sof sof)
+{
+ return sof < 0x30;
+}
+
+#endif /* _FC_ENCAPS_H_ */
diff --git a/include/scsi/fc/fc_fc2.h b/include/scsi/fc/fc_fc2.h
new file mode 100644
index 0000000..cff8a8c
--- /dev/null
+++ b/include/scsi/fc/fc_fc2.h
@@ -0,0 +1,124 @@
+/*
+ * Copyright(c) 2007 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Maintained at www.Open-FCoE.org
+ */
+
+#ifndef _FC_FC2_H_
+#define _FC_FC2_H_
+
+/*
+ * Fibre Channel Exchanges and Sequences.
+ */
+#ifndef PACKED
+#define PACKED __attribute__ ((__packed__))
+#endif /* PACKED */
+
+
+/*
+ * Sequence Status Block.
+ * This format is set by the FC-FS standard and is sent over the wire.
+ * Note that the fields aren't all naturally aligned.
+ */
+struct fc_ssb {
+ __u8 ssb_seq_id; /* sequence ID */
+ __u8 _ssb_resvd;
+ __be16 ssb_low_seq_cnt; /* lowest SEQ_CNT */
+
+ __be16 ssb_high_seq_cnt; /* highest SEQ_CNT */
+ __be16 ssb_s_stat; /* sequence status flags */
+
+ __be16 ssb_err_seq_cnt; /* error SEQ_CNT */
+ __u8 ssb_fh_cs_ctl; /* frame header CS_CTL */
+ __be16 ssb_fh_ox_id; /* frame header OX_ID */
+ __be16 ssb_rx_id; /* responder's exchange ID */
+ __u8 _ssb_resvd2[2];
+} PACKED;
+
+/*
+ * The SSB should be 17 bytes. Since it's layout is somewhat strange,
+ * we define the size here so that code can ASSERT that the size comes out
+ * correct.
+ */
+#define FC_SSB_SIZE 17 /* length of fc_ssb for assert */
+
+/*
+ * ssb_s_stat - flags from FC-FS-2 T11/1619-D Rev 0.90.
+ */
+#define SSB_ST_RESP (1 << 15) /* sequence responder */
+#define SSB_ST_ACTIVE (1 << 14) /* sequence is active */
+#define SSB_ST_ABNORMAL (1 << 12) /* abnormal ending condition */
+
+#define SSB_ST_REQ_MASK (3 << 10) /* ACK, abort sequence condition */
+#define SSB_ST_REQ_CONT (0 << 10)
+#define SSB_ST_REQ_ABORT (1 << 10)
+#define SSB_ST_REQ_STOP (2 << 10)
+#define SSB_ST_REQ_RETRANS (3 << 10)
+
+#define SSB_ST_ABTS (1 << 9) /* ABTS protocol completed */
+#define SSB_ST_RETRANS (1 << 8) /* retransmission completed */
+#define SSB_ST_TIMEOUT (1 << 7) /* sequence timed out by recipient */
+#define SSB_ST_P_RJT (1 << 6) /* P_RJT transmitted */
+
+#define SSB_ST_CLASS_BIT 4 /* class of service field LSB */
+#define SSB_ST_CLASS_MASK 3 /* class of service mask */
+#define SSB_ST_ACK (1 << 3) /* ACK (EOFt or EOFdt) transmitted */
+
+/*
+ * Exchange Status Block.
+ * This format is set by the FC-FS standard and is sent over the wire.
+ * Note that the fields aren't all naturally aligned.
+ */
+struct fc_esb {
+ __u8 esb_cs_ctl; /* CS_CTL for frame header */
+ __be16 esb_ox_id; /* originator exchange ID */
+ __be16 esb_rx_id; /* responder exchange ID */
+ __be32 esb_orig_fid; /* fabric ID of originator */
+ __be32 esb_resp_fid; /* fabric ID of responder */
+ __be32 esb_e_stat; /* status */
+ __u8 _esb_resvd[4];
+ __u8 esb_service_params[112]; /* TBD */
+ __u8 esb_seq_status[8]; /* sequence statuses, 8 bytes each */
+} __attribute__((packed));;
+
+
+/*
+ * Define expected size for ASSERTs.
+ * See comments on FC_SSB_SIZE.
+ */
+#define FC_ESB_SIZE (1 + 5*4 + 112 + 8) /* expected size */
+
+/*
+ * esb_e_stat - flags from FC-FS-2 T11/1619-D Rev 0.90.
+ */
+#define ESB_ST_RESP (1 << 31) /* responder to exchange */
+#define ESB_ST_SEQ_INIT (1 << 30) /* port holds sequence initiaive */
+#define ESB_ST_COMPLETE (1 << 29) /* exchange is complete */
+#define ESB_ST_ABNORMAL (1 << 28) /* abnormal ending condition */
+#define ESB_ST_REC_QUAL (1 << 26) /* recovery qualifier active */
+
+#define ESB_ST_ERRP_BIT 24 /* LSB for error policy */
+#define ESB_ST_ERRP_MASK (3 << 24) /* mask for error policy */
+#define ESB_ST_ERRP_MULT (0 << 24) /* abort, discard multiple sequences */
+#define ESB_ST_ERRP_SING (1 << 24) /* abort, discard single sequence */
+#define ESB_ST_ERRP_INF (2 << 24) /* process with infinite buffers */
+#define ESB_ST_ERRP_IMM (3 << 24) /* discard mult. with immed. retran. */
+
+#define ESB_ST_OX_ID_INVL (1 << 23) /* originator XID invalid */
+#define ESB_ST_RX_ID_INVL (1 << 22) /* responder XID invalid */
+#define ESB_ST_PRI_INUSE (1 << 21) /* priority / preemption in use */
+
+#endif /* _FC_FC2_H_ */
diff --git a/include/scsi/fc/fc_fcoe.h b/include/scsi/fc/fc_fcoe.h
new file mode 100644
index 0000000..a6118a2
--- /dev/null
+++ b/include/scsi/fc/fc_fcoe.h
@@ -0,0 +1,102 @@
+/*
+ * Copyright(c) 2007 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Maintained at www.Open-FCoE.org
+ */
+
+#ifndef _FC_FCOE_H_
+#define _FC_FCOE_H_
+
+/*
+ * FCoE - Fibre Channel over Ethernet.
+ */
+
+/*
+ * The FCoE ethertype eventually goes in net/if_ether.h.
+ */
+#ifndef ETH_P_FCOE
+#define ETH_P_FCOE 0x8906 /* FCOE ether type */
+#endif
+
+#ifndef ETH_P_8021Q
+#define ETH_P_8021Q 0x8100
+#endif
+
+/*
+ * FC_FCOE_OUI hasn't been standardized yet. XXX TBD.
+ */
+#ifndef FC_FCOE_OUI
+#define FC_FCOE_OUI 0x0efc00 /* upper 24 bits of FCOE dest MAC TBD */
+#endif
+
+/*
+ * The destination MAC address for the fabric login may get a different OUI.
+ * This isn't standardized yet.
+ */
+#ifndef FC_FCOE_FLOGI_MAC
+/* gateway MAC - TBD */
+#define FC_FCOE_FLOGI_MAC { 0x0e, 0xfc, 0x00, 0xff, 0xff, 0xfe }
+#endif
+
+#define FC_FCOE_VER 0 /* version */
+
+/*
+ * Ethernet Addresses based on FC S_ID and D_ID.
+ * Generated by FC_FCOE_OUI | S_ID/D_ID
+ */
+#define FC_FCOE_ENCAPS_ID(n) (((u64) FC_FCOE_OUI << 24) | (n))
+#define FC_FCOE_DECAPS_ID(n) ((n) >> 24)
+
+/*
+ * FCoE frame header - 14 bytes
+ *
+ * This is the August 2007 version of the FCoE header as defined by T11.
+ * This follows the VLAN header, which includes the ethertype.
+ */
+struct fcoe_hdr {
+ __u8 fcoe_ver; /* version field - upper 4 bits */
+ __u8 fcoe_resvd[12]; /* reserved - send zero and ignore */
+ __u8 fcoe_sof; /* start of frame per RFC 3643 */
+};
+
+#define FC_FCOE_DECAPS_VER(hp) ((hp)->fcoe_ver >> 4)
+#define FC_FCOE_ENCAPS_VER(hp, ver) ((hp)->fcoe_ver = (ver) << 4)
+
+/*
+ * FCoE CRC & EOF - 8 bytes.
+ */
+struct fcoe_crc_eof {
+ __le32 fcoe_crc32; /* CRC for FC packet */
+ __u8 fcoe_eof; /* EOF from RFC 3643 */
+ __u8 fcoe_resvd[3]; /* reserved - send zero and ignore */
+} __attribute__((packed));
+
+/*
+ * fc_fcoe_set_mac - Store OUI + DID into MAC address field.
+ * @mac: mac address to be set
+ * @did: fc dest id to use
+ */
+static inline void fc_fcoe_set_mac(u8 *mac, u8 *did)
+{
+ mac[0] = (u8) (FC_FCOE_OUI >> 16);
+ mac[1] = (u8) (FC_FCOE_OUI >> 8);
+ mac[2] = (u8) FC_FCOE_OUI;
+ mac[3] = did[0];
+ mac[4] = did[1];
+ mac[5] = did[2];
+}
+
+#endif /* _FC_FCOE_H_ */
diff --git a/include/scsi/fc/fc_fcp.h b/include/scsi/fc/fc_fcp.h
new file mode 100644
index 0000000..5d38f19
--- /dev/null
+++ b/include/scsi/fc/fc_fcp.h
@@ -0,0 +1,199 @@
+/*
+ * Copyright(c) 2007 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Maintained at www.Open-FCoE.org
+ */
+
+#ifndef _FC_FCP_H_
+#define _FC_FCP_H_
+
+/*
+ * Fibre Channel Protocol for SCSI.
+ * From T10 FCP-3, T10 project 1560-D Rev 4, Sept. 13, 2005.
+ */
+
+/*
+ * fc/fs.h defines FC_TYPE_FCP.
+ */
+
+/*
+ * Service parameter page parameters (word 3 bits) for Process Login.
+ */
+#define FCP_SPPF_TASK_RETRY_ID 0x0200 /* task retry ID requested */
+#define FCP_SPPF_RETRY 0x0100 /* retry supported */
+#define FCP_SPPF_CONF_COMPL 0x0080 /* confirmed completion allowed */
+#define FCP_SPPF_OVLY_ALLOW 0x0040 /* data overlay allowed */
+#define FCP_SPPF_INIT_FCN 0x0020 /* initiator function */
+#define FCP_SPPF_TARG_FCN 0x0010 /* target function */
+#define FCP_SPPF_RD_XRDY_DIS 0x0002 /* disable XFER_RDY for reads */
+#define FCP_SPPF_WR_XRDY_DIS 0x0001 /* disable XFER_RDY for writes */
+
+/*
+ * FCP_CMND IU Payload.
+ */
+struct fcp_cmnd {
+ __u8 fc_lun[8]; /* logical unit number */
+ __u8 fc_cmdref; /* commmand reference number */
+ __u8 fc_pri_ta; /* priority and task attribute */
+ __u8 fc_tm_flags; /* task management flags */
+ __u8 fc_flags; /* additional len & flags */
+ __u8 fc_cdb[16]; /* base CDB */
+ __be32 fc_dl; /* data length (must follow fc_cdb) */
+};
+
+#define FCP_CMND_LEN 32 /* expected length of structure */
+
+struct fcp_cmnd32 {
+ __u8 fc_lun[8]; /* logical unit number */
+ __u8 fc_cmdref; /* commmand reference number */
+ __u8 fc_pri_ta; /* priority and task attribute */
+ __u8 fc_tm_flags; /* task management flags */
+ __u8 fc_flags; /* additional len & flags */
+ __u8 fc_cdb[32]; /* base CDB */
+ __be32 fc_dl; /* data length (must follow fc_cdb) */
+};
+
+#define FCP_CMND32_LEN 48 /* expected length of structure */
+#define FCP_CMND32_ADD_LEN (16 / 4) /* Additional cdb length */
+
+/*
+ * fc_pri_ta.
+ */
+#define FCP_PTA_SIMPLE 0 /* simple task attribute */
+#define FCP_PTA_HEADQ 1 /* head of queue task attribute */
+#define FCP_PTA_ORDERED 2 /* ordered task attribute */
+#define FCP_PTA_ACA 4 /* auto. contigent allegiance */
+#define FCP_PRI_SHIFT 3 /* priority field starts in bit 3 */
+#define FCP_PRI_RESVD_MASK 0x80 /* reserved bits in priority field */
+
+/*
+ * fc_tm_flags - task management flags field.
+ */
+#define FCP_TMF_CLR_ACA 0x40 /* clear ACA condition */
+#define FCP_TMF_LUN_RESET 0x10 /* logical unit reset task management */
+#define FCP_TMF_CLR_TASK_SET 0x04 /* clear task set */
+#define FCP_TMF_ABT_TASK_SET 0x02 /* abort task set */
+
+/*
+ * fc_flags.
+ * Bits 7:2 are the additional FCP_CDB length / 4.
+ */
+#define FCP_CFL_LEN_MASK 0xfc /* mask for additional length */
+#define FCP_CFL_LEN_SHIFT 2 /* shift bits for additional length */
+#define FCP_CFL_RDDATA 0x02 /* read data */
+#define FCP_CFL_WRDATA 0x01 /* write data */
+
+/*
+ * FCP_TXRDY IU - transfer ready payload.
+ */
+struct fcp_txrdy {
+ __be32 ft_data_ro; /* data relative offset */
+ __be32 ft_burst_len; /* burst length */
+ __u8 _ft_resvd[4]; /* reserved */
+};
+
+#define FCP_TXRDY_LEN 12 /* expected length of structure */
+
+/*
+ * FCP_RESP IU - response payload.
+ *
+ * The response payload comes in three parts: the flags/status, the
+ * sense/response lengths and the sense data/response info section.
+ *
+ * From FCP3r04, note 6 of section 9.5.13:
+ *
+ * Some early implementations presented the FCP_RSP IU without the FCP_RESID,
+ * FCP_SNS_LEN, and FCP_RSP_LEN fields if the FCP_RESID_UNDER, FCP_RESID_OVER,
+ * FCP_SNS_LEN_VALID, and FCP_RSP_LEN_VALID bits were all set to zero. This
+ * non-standard behavior should be tolerated.
+ *
+ * All response frames will always contain the fcp_resp template. Some
+ * will also include the fcp_resp_len template.
+ */
+struct fcp_resp {
+ __u8 _fr_resvd[8]; /* reserved */
+ __be16 fr_retry_delay; /* retry delay timer */
+ __u8 fr_flags; /* flags */
+ __u8 fr_status; /* SCSI status code */
+};
+
+#define FCP_RESP_LEN 12 /* expected length of structure */
+
+struct fcp_resp_ext {
+ __be32 fr_resid; /* Residual value */
+ __be32 fr_sns_len; /* SCSI Sense length */
+ __be32 fr_rsp_len; /* Response Info length */
+
+ /*
+ * Optionally followed by RSP info and/or SNS info and/or
+ * bidirectional read residual length, if any.
+ */
+};
+
+#define FCP_RESP_EXT_LEN 12 /* expected length of the structure */
+
+struct fcp_resp_rsp_info {
+ __u8 _fr_resvd[3]; /* reserved */
+ __u8 rsp_code; /* Response Info Code */
+ __u8 _fr_resvd2[4]; /* reserved */
+};
+
+struct fcp_resp_with_ext {
+ struct fcp_resp resp;
+ struct fcp_resp_ext ext;
+};
+
+#define FCP_RESP_WITH_EXT (FCP_RESP_LEN + FCP_RESP_EXT_LEN)
+
+/*
+ * fr_flags.
+ */
+#define FCP_BIDI_RSP 0x80 /* bidirectional read response */
+#define FCP_BIDI_READ_UNDER 0x40 /* bidir. read less than requested */
+#define FCP_BIDI_READ_OVER 0x20 /* DL insufficient for full transfer */
+#define FCP_CONF_REQ 0x10 /* confirmation requested */
+#define FCP_RESID_UNDER 0x08 /* transfer shorter than expected */
+#define FCP_RESID_OVER 0x04 /* DL insufficient for full transfer */
+#define FCP_SNS_LEN_VAL 0x02 /* SNS_LEN field is valid */
+#define FCP_RSP_LEN_VAL 0x01 /* RSP_LEN field is valid */
+
+/*
+ * rsp_codes
+ */
+enum fcp_resp_rsp_codes {
+ FCP_TMF_CMPL = 0,
+ FCP_DATA_LEN_INVALID = 1,
+ FCP_CMND_FIELDS_INVALID = 2,
+ FCP_DATA_PARAM_MISMATCH = 3,
+ FCP_TMF_REJECTED = 4,
+ FCP_TMF_FAILED = 5,
+ FCP_TMF_INVALID_LUN = 9,
+};
+
+/*
+ * FCP SRR Link Service request - Sequence Retransmission Request.
+ */
+struct fcp_srr {
+ __u8 srr_op; /* opcode ELS_SRR */
+ __u8 srr_resvd[3]; /* opcode / reserved - must be zero */
+ __be16 srr_ox_id; /* OX_ID of failed command */
+ __be16 srr_rx_id; /* RX_ID of failed command */
+ __be32 srr_rel_off; /* relative offset */
+ __u8 srr_r_ctl; /* r_ctl for the information unit */
+ __u8 srr_resvd2[3]; /* reserved */
+};
+
+#endif /* _FC_FCP_H_ */
diff --git a/include/scsi/fc/fc_fs.h b/include/scsi/fc/fc_fs.h
new file mode 100644
index 0000000..3e4801d
--- /dev/null
+++ b/include/scsi/fc/fc_fs.h
@@ -0,0 +1,340 @@
+/*
+ * Copyright(c) 2007 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Maintained at www.Open-FCoE.org
+ */
+
+#ifndef _FC_FS_H_
+#define _FC_FS_H_
+
+/*
+ * Fibre Channel Framing and Signalling definitions.
+ * From T11 FC-FS-2 Rev 0.90 - 9 August 2005.
+ */
+
+/*
+ * Frame header
+ */
+struct fc_frame_header {
+ __u8 fh_r_ctl; /* routing control */
+ __u8 fh_d_id[3]; /* Destination ID */
+
+ __u8 fh_cs_ctl; /* class of service control / pri */
+ __u8 fh_s_id[3]; /* Source ID */
+
+ __u8 fh_type; /* see enum fc_fh_type below */
+ __u8 fh_f_ctl[3]; /* frame control */
+
+ __u8 fh_seq_id; /* sequence ID */
+ __u8 fh_df_ctl; /* data field control */
+ __be16 fh_seq_cnt; /* sequence count */
+
+ __be16 fh_ox_id; /* originator exchange ID */
+ __be16 fh_rx_id; /* responder exchange ID */
+ __be32 fh_parm_offset; /* parameter or relative offset */
+};
+
+#define FC_FRAME_HEADER_LEN 24 /* expected length of structure */
+
+#define FC_MAX_PAYLOAD 2112U /* max payload length in bytes */
+#define FC_MIN_MAX_PAYLOAD 256U /* lower limit on max payload */
+
+#define FC_MAX_FRAME (FC_MAX_PAYLOAD + FC_FRAME_HEADER_LEN)
+#define FC_MIN_MAX_FRAME (FC_MIN_MAX_PAYLOAD + FC_FRAME_HEADER_LEN)
+
+/*
+ * fh_r_ctl - Routing control definitions.
+ */
+ /*
+ * FC-4 device_data.
+ */
+enum fc_rctl {
+ FC_RCTL_DD_UNCAT = 0x00, /* uncategorized information */
+ FC_RCTL_DD_SOL_DATA = 0x01, /* solicited data */
+ FC_RCTL_DD_UNSOL_CTL = 0x02, /* unsolicited control */
+ FC_RCTL_DD_SOL_CTL = 0x03, /* solicited control or reply */
+ FC_RCTL_DD_UNSOL_DATA = 0x04, /* unsolicited data */
+ FC_RCTL_DD_DATA_DESC = 0x05, /* data descriptor */
+ FC_RCTL_DD_UNSOL_CMD = 0x06, /* unsolicited command */
+ FC_RCTL_DD_CMD_STATUS = 0x07, /* command status */
+
+#define FC_RCTL_ILS_REQ FC_RCTL_DD_UNSOL_CTL /* ILS request */
+#define FC_RCTL_ILS_REP FC_RCTL_DD_SOL_CTL /* ILS reply */
+
+ /*
+ * Extended Link_Data
+ */
+ FC_RCTL_ELS_REQ = 0x22, /* extended link services request */
+ FC_RCTL_ELS_REP = 0x23, /* extended link services reply */
+ FC_RCTL_ELS4_REQ = 0x32, /* FC-4 ELS request */
+ FC_RCTL_ELS4_REP = 0x33, /* FC-4 ELS reply */
+ /*
+ * Optional Extended Headers
+ */
+ FC_RCTL_VFTH = 0x50, /* virtual fabric tagging header */
+ FC_RCTL_IFRH = 0x51, /* inter-fabric routing header */
+ FC_RCTL_ENCH = 0x52, /* encapsulation header */
+ /*
+ * Basic Link Services fh_r_ctl values.
+ */
+ FC_RCTL_BA_NOP = 0x80, /* basic link service NOP */
+ FC_RCTL_BA_ABTS = 0x81, /* basic link service abort */
+ FC_RCTL_BA_RMC = 0x82, /* remove connection */
+ FC_RCTL_BA_ACC = 0x84, /* basic accept */
+ FC_RCTL_BA_RJT = 0x85, /* basic reject */
+ FC_RCTL_BA_PRMT = 0x86, /* dedicated connection preempted */
+ /*
+ * Link Control Information.
+ */
+ FC_RCTL_ACK_1 = 0xc0, /* acknowledge_1 */
+ FC_RCTL_ACK_0 = 0xc1, /* acknowledge_0 */
+ FC_RCTL_P_RJT = 0xc2, /* port reject */
+ FC_RCTL_F_RJT = 0xc3, /* fabric reject */
+ FC_RCTL_P_BSY = 0xc4, /* port busy */
+ FC_RCTL_F_BSY = 0xc5, /* fabric busy to data frame */
+ FC_RCTL_F_BSYL = 0xc6, /* fabric busy to link control frame */
+ FC_RCTL_LCR = 0xc7, /* link credit reset */
+ FC_RCTL_END = 0xc9, /* end */
+};
+ /* incomplete list of definitions */
+
+/*
+ * R_CTL names initializer.
+ * Please keep this matching the above definitions.
+ */
+#define FC_RCTL_NAMES_INIT { \
+ [FC_RCTL_DD_UNCAT] = "uncat", \
+ [FC_RCTL_DD_SOL_DATA] = "sol data", \
+ [FC_RCTL_DD_UNSOL_CTL] = "unsol ctl", \
+ [FC_RCTL_DD_SOL_CTL] = "sol ctl/reply", \
+ [FC_RCTL_DD_UNSOL_DATA] = "unsol data", \
+ [FC_RCTL_DD_DATA_DESC] = "data desc", \
+ [FC_RCTL_DD_UNSOL_CMD] = "unsol cmd", \
+ [FC_RCTL_DD_CMD_STATUS] = "cmd status", \
+ [FC_RCTL_ELS_REQ] = "ELS req", \
+ [FC_RCTL_ELS_REP] = "ELS rep", \
+ [FC_RCTL_ELS4_REQ] = "FC-4 ELS req", \
+ [FC_RCTL_ELS4_REP] = "FC-4 ELS rep", \
+ [FC_RCTL_BA_NOP] = "BLS NOP", \
+ [FC_RCTL_BA_ABTS] = "BLS abort", \
+ [FC_RCTL_BA_RMC] = "BLS remove connection", \
+ [FC_RCTL_BA_ACC] = "BLS accept", \
+ [FC_RCTL_BA_RJT] = "BLS reject", \
+ [FC_RCTL_BA_PRMT] = "BLS dedicated connection preempted", \
+ [FC_RCTL_ACK_1] = "LC ACK_1", \
+ [FC_RCTL_ACK_0] = "LC ACK_0", \
+ [FC_RCTL_P_RJT] = "LC port reject", \
+ [FC_RCTL_F_RJT] = "LC fabric reject", \
+ [FC_RCTL_P_BSY] = "LC port busy", \
+ [FC_RCTL_F_BSY] = "LC fabric busy to data frame", \
+ [FC_RCTL_F_BSYL] = "LC fabric busy to link control frame",\
+ [FC_RCTL_LCR] = "LC link credit reset", \
+ [FC_RCTL_END] = "LC end", \
+}
+
+/*
+ * Well-known fabric addresses.
+ */
+enum fc_well_known_fid {
+ FC_FID_BCAST = 0xffffff, /* broadcast */
+ FC_FID_FLOGI = 0xfffffe, /* fabric login */
+ FC_FID_FCTRL = 0xfffffd, /* fabric controller */
+ FC_FID_DIR_SERV = 0xfffffc, /* directory server */
+ FC_FID_TIME_SERV = 0xfffffb, /* time server */
+ FC_FID_MGMT_SERV = 0xfffffa, /* management server */
+ FC_FID_QOS = 0xfffff9, /* QoS Facilitator */
+ FC_FID_ALIASES = 0xfffff8, /* alias server (FC-PH2) */
+ FC_FID_SEC_KEY = 0xfffff7, /* Security key dist. server */
+ FC_FID_CLOCK = 0xfffff6, /* clock synch server */
+ FC_FID_MCAST_SERV = 0xfffff5, /* multicast server */
+};
+
+#define FC_FID_WELL_KNOWN_MAX 0xffffff /* highest well-known fabric ID */
+#define FC_FID_WELL_KNOWN_BASE 0xfffff5 /* start of well-known fabric ID */
+
+/*
+ * Other well-known addresses, outside the above contiguous range.
+ */
+#define FC_FID_DOM_MGR 0xfffc00 /* domain manager base */
+
+/*
+ * Fabric ID bytes.
+ */
+#define FC_FID_DOMAIN 0
+#define FC_FID_PORT 1
+#define FC_FID_LINK 2
+
+/*
+ * fh_type codes
+ */
+enum fc_fh_type {
+ FC_TYPE_BLS = 0x00, /* basic link service */
+ FC_TYPE_ELS = 0x01, /* extended link service */
+ FC_TYPE_IP = 0x05, /* IP over FC, RFC 4338 */
+ FC_TYPE_FCP = 0x08, /* SCSI FCP */
+ FC_TYPE_CT = 0x20, /* Fibre Channel Services (FC-CT) */
+ FC_TYPE_ILS = 0x22, /* internal link service */
+};
+
+/*
+ * FC_TYPE names initializer.
+ * Please keep this matching the above definitions.
+ */
+#define FC_TYPE_NAMES_INIT { \
+ [FC_TYPE_BLS] = "BLS", \
+ [FC_TYPE_ELS] = "ELS", \
+ [FC_TYPE_IP] = "IP", \
+ [FC_TYPE_FCP] = "FCP", \
+ [FC_TYPE_CT] = "CT", \
+ [FC_TYPE_ILS] = "ILS", \
+}
+
+/*
+ * Exchange IDs.
+ */
+#define FC_XID_UNKNOWN 0xffff /* unknown exchange ID */
+#define FC_XID_MIN 0x0 /* supported min exchange ID */
+#define FC_XID_MAX 0xfffe /* supported max exchange ID */
+
+/*
+ * fh_f_ctl - Frame control flags.
+ */
+#define FC_FC_EX_CTX (1 << 23) /* sent by responder to exchange */
+#define FC_FC_SEQ_CTX (1 << 22) /* sent by responder to sequence */
+#define FC_FC_FIRST_SEQ (1 << 21) /* first sequence of this exchange */
+#define FC_FC_LAST_SEQ (1 << 20) /* last sequence of this exchange */
+#define FC_FC_END_SEQ (1 << 19) /* last frame of sequence */
+#define FC_FC_END_CONN (1 << 18) /* end of class 1 connection pending */
+#define FC_FC_RES_B17 (1 << 17) /* reserved */
+#define FC_FC_SEQ_INIT (1 << 16) /* transfer of sequence initiative */
+#define FC_FC_X_ID_REASS (1 << 15) /* exchange ID has been changed */
+#define FC_FC_X_ID_INVAL (1 << 14) /* exchange ID invalidated */
+
+#define FC_FC_ACK_1 (1 << 12) /* 13:12 = 1: ACK_1 expected */
+#define FC_FC_ACK_N (2 << 12) /* 13:12 = 2: ACK_N expected */
+#define FC_FC_ACK_0 (3 << 12) /* 13:12 = 3: ACK_0 expected */
+
+#define FC_FC_RES_B11 (1 << 11) /* reserved */
+#define FC_FC_RES_B10 (1 << 10) /* reserved */
+#define FC_FC_RETX_SEQ (1 << 9) /* retransmitted sequence */
+#define FC_FC_UNI_TX (1 << 8) /* unidirectional transmit (class 1) */
+#define FC_FC_CONT_SEQ(i) ((i) << 6)
+#define FC_FC_ABT_SEQ(i) ((i) << 4)
+#define FC_FC_REL_OFF (1 << 3) /* parameter is relative offset */
+#define FC_FC_RES2 (1 << 2) /* reserved */
+#define FC_FC_FILL(i) ((i) & 3) /* 1:0: bytes of trailing fill */
+
+/*
+ * BA_ACC payload.
+ */
+struct fc_ba_acc {
+ __u8 ba_seq_id_val; /* SEQ_ID validity */
+#define FC_BA_SEQ_ID_VAL 0x80
+ __u8 ba_seq_id; /* SEQ_ID of seq last deliverable */
+ __u8 ba_resvd[2]; /* reserved */
+ __be16 ba_ox_id; /* OX_ID for aborted seq or exch */
+ __be16 ba_rx_id; /* RX_ID for aborted seq or exch */
+ __be16 ba_low_seq_cnt; /* low SEQ_CNT of aborted seq */
+ __be16 ba_high_seq_cnt; /* high SEQ_CNT of aborted seq */
+};
+
+/*
+ * BA_RJT: Basic Reject payload.
+ */
+struct fc_ba_rjt {
+ __u8 br_resvd; /* reserved */
+ __u8 br_reason; /* reason code */
+ __u8 br_explan; /* reason explanation */
+ __u8 br_vendor; /* vendor unique code */
+};
+
+/*
+ * BA_RJT reason codes.
+ * From FS-2.
+ */
+enum fc_ba_rjt_reason {
+ FC_BA_RJT_NONE = 0, /* in software this means no reject */
+ FC_BA_RJT_INVL_CMD = 0x01, /* invalid command code */
+ FC_BA_RJT_LOG_ERR = 0x03, /* logical error */
+ FC_BA_RJT_LOG_BUSY = 0x05, /* logical busy */
+ FC_BA_RJT_PROTO_ERR = 0x07, /* protocol error */
+ FC_BA_RJT_UNABLE = 0x09, /* unable to perform request */
+ FC_BA_RJT_VENDOR = 0xff, /* vendor-specific (see br_vendor) */
+};
+
+/*
+ * BA_RJT reason code explanations.
+ */
+enum fc_ba_rjt_explan {
+ FC_BA_RJT_EXP_NONE = 0x00, /* no additional expanation */
+ FC_BA_RJT_INV_XID = 0x03, /* invalid OX_ID-RX_ID combination */
+ FC_BA_RJT_ABT = 0x05, /* sequence aborted, no seq info */
+};
+
+/*
+ * P_RJT or F_RJT: Port Reject or Fabric Reject parameter field.
+ */
+struct fc_pf_rjt {
+ __u8 rj_action; /* reserved */
+ __u8 rj_reason; /* reason code */
+ __u8 rj_resvd; /* reserved */
+ __u8 rj_vendor; /* vendor unique code */
+};
+
+/*
+ * P_RJT and F_RJT reject reason codes.
+ */
+enum fc_pf_rjt_reason {
+ FC_RJT_NONE = 0, /* non-reject (reserved by standard) */
+ FC_RJT_INVL_DID = 0x01, /* invalid destination ID */
+ FC_RJT_INVL_SID = 0x02, /* invalid source ID */
+ FC_RJT_P_UNAV_T = 0x03, /* port unavailable, temporary */
+ FC_RJT_P_UNAV = 0x04, /* port unavailable, permanent */
+ FC_RJT_CLS_UNSUP = 0x05, /* class not supported */
+ FC_RJT_DEL_USAGE = 0x06, /* delimiter usage error */
+ FC_RJT_TYPE_UNSUP = 0x07, /* type not supported */
+ FC_RJT_LINK_CTL = 0x08, /* invalid link control */
+ FC_RJT_R_CTL = 0x09, /* invalid R_CTL field */
+ FC_RJT_F_CTL = 0x0a, /* invalid F_CTL field */
+ FC_RJT_OX_ID = 0x0b, /* invalid originator exchange ID */
+ FC_RJT_RX_ID = 0x0c, /* invalid responder exchange ID */
+ FC_RJT_SEQ_ID = 0x0d, /* invalid sequence ID */
+ FC_RJT_DF_CTL = 0x0e, /* invalid DF_CTL field */
+ FC_RJT_SEQ_CNT = 0x0f, /* invalid SEQ_CNT field */
+ FC_RJT_PARAM = 0x10, /* invalid parameter field */
+ FC_RJT_EXCH_ERR = 0x11, /* exchange error */
+ FC_RJT_PROTO = 0x12, /* protocol error */
+ FC_RJT_LEN = 0x13, /* incorrect length */
+ FC_RJT_UNEXP_ACK = 0x14, /* unexpected ACK */
+ FC_RJT_FAB_CLASS = 0x15, /* class unsupported by fabric entity */
+ FC_RJT_LOGI_REQ = 0x16, /* login required */
+ FC_RJT_SEQ_XS = 0x17, /* excessive sequences attempted */
+ FC_RJT_EXCH_EST = 0x18, /* unable to establish exchange */
+ FC_RJT_FAB_UNAV = 0x1a, /* fabric unavailable */
+ FC_RJT_VC_ID = 0x1b, /* invalid VC_ID (class 4) */
+ FC_RJT_CS_CTL = 0x1c, /* invalid CS_CTL field */
+ FC_RJT_INSUF_RES = 0x1d, /* insuff. resources for VC (Class 4) */
+ FC_RJT_INVL_CLS = 0x1f, /* invalid class of service */
+ FC_RJT_PREEMT_RJT = 0x20, /* preemption request rejected */
+ FC_RJT_PREEMT_DIS = 0x21, /* preemption not enabled */
+ FC_RJT_MCAST_ERR = 0x22, /* multicast error */
+ FC_RJT_MCAST_ET = 0x23, /* multicast error terminate */
+ FC_RJT_PRLI_REQ = 0x24, /* process login required */
+ FC_RJT_INVL_ATT = 0x25, /* invalid attachment */
+ FC_RJT_VENDOR = 0xff, /* vendor specific reject */
+};
+
+#endif /* _FC_FS_H_ */
diff --git a/include/scsi/fc/fc_gs.h b/include/scsi/fc/fc_gs.h
new file mode 100644
index 0000000..ffab027
--- /dev/null
+++ b/include/scsi/fc/fc_gs.h
@@ -0,0 +1,93 @@
+/*
+ * Copyright(c) 2007 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Maintained at www.Open-FCoE.org
+ */
+
+#ifndef _FC_GS_H_
+#define _FC_GS_H_
+
+/*
+ * Fibre Channel Services - Common Transport.
+ * From T11.org FC-GS-2 Rev 5.3 November 1998.
+ */
+
+struct fc_ct_hdr {
+ __u8 ct_rev; /* revision */
+ __u8 ct_in_id[3]; /* N_Port ID of original requestor */
+ __u8 ct_fs_type; /* type of fibre channel service */
+ __u8 ct_fs_subtype; /* subtype */
+ __u8 ct_options;
+ __u8 _ct_resvd1;
+ __be16 ct_cmd; /* command / response code */
+ __be16 ct_mr_size; /* maximum / residual size */
+ __u8 _ct_resvd2;
+ __u8 ct_reason; /* reject reason */
+ __u8 ct_explan; /* reason code explanation */
+ __u8 ct_vendor; /* vendor unique data */
+};
+
+#define FC_CT_HDR_LEN 16 /* expected sizeof (struct fc_ct_hdr) */
+
+enum fc_ct_rev {
+ FC_CT_REV = 1 /* common transport revision */
+};
+
+/*
+ * ct_fs_type values.
+ */
+enum fc_ct_fs_type {
+ FC_FST_ALIAS = 0xf8, /* alias service */
+ FC_FST_MGMT = 0xfa, /* management service */
+ FC_FST_TIME = 0xfb, /* time service */
+ FC_FST_DIR = 0xfc, /* directory service */
+};
+
+/*
+ * ct_cmd: Command / response codes
+ */
+enum fc_ct_cmd {
+ FC_FS_RJT = 0x8001, /* reject */
+ FC_FS_ACC = 0x8002, /* accept */
+};
+
+/*
+ * FS_RJT reason codes.
+ */
+enum fc_ct_reason {
+ FC_FS_RJT_CMD = 0x01, /* invalid command code */
+ FC_FS_RJT_VER = 0x02, /* invalid version level */
+ FC_FS_RJT_LOG = 0x03, /* logical error */
+ FC_FS_RJT_IUSIZ = 0x04, /* invalid IU size */
+ FC_FS_RJT_BSY = 0x05, /* logical busy */
+ FC_FS_RJT_PROTO = 0x07, /* protocol error */
+ FC_FS_RJT_UNABL = 0x09, /* unable to perform command request */
+ FC_FS_RJT_UNSUP = 0x0b, /* command not supported */
+};
+
+/*
+ * FS_RJT reason code explanations.
+ */
+enum fc_ct_explan {
+ FC_FS_EXP_NONE = 0x00, /* no additional explanation */
+ FC_FS_EXP_PID = 0x01, /* port ID not registered */
+ FC_FS_EXP_PNAM = 0x02, /* port name not registered */
+ FC_FS_EXP_NNAM = 0x03, /* node name not registered */
+ FC_FS_EXP_COS = 0x04, /* class of service not registered */
+ /* definitions not complete */
+};
+
+#endif /* _FC_GS_H_ */
diff --git a/include/scsi/fc/fc_ns.h b/include/scsi/fc/fc_ns.h
new file mode 100644
index 0000000..790d7b9
--- /dev/null
+++ b/include/scsi/fc/fc_ns.h
@@ -0,0 +1,159 @@
+/*
+ * Copyright(c) 2007 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Maintained at www.Open-FCoE.org
+ */
+
+#ifndef _FC_NS_H_
+#define _FC_NS_H_
+
+/*
+ * Fibre Channel Services - Name Service (dNS)
+ * From T11.org FC-GS-2 Rev 5.3 November 1998.
+ */
+
+/*
+ * Common-transport sub-type for Name Server.
+ */
+#define FC_NS_SUBTYPE 2 /* fs_ct_hdr.ct_fs_subtype */
+
+/*
+ * Name server Requests.
+ * Note: this is an incomplete list, some unused requests are omitted.
+ */
+enum fc_ns_req {
+ FC_NS_GA_NXT = 0x0100, /* get all next */
+ FC_NS_GI_A = 0x0101, /* get identifiers - scope */
+ FC_NS_GPN_ID = 0x0112, /* get port name by ID */
+ FC_NS_GNN_ID = 0x0113, /* get node name by ID */
+ FC_NS_GID_PN = 0x0121, /* get ID for port name */
+ FC_NS_GID_NN = 0x0131, /* get IDs for node name */
+ FC_NS_GID_FT = 0x0171, /* get IDs by FC4 type */
+ FC_NS_GPN_FT = 0x0172, /* get port names by FC4 type */
+ FC_NS_GID_PT = 0x01a1, /* get IDs by port type */
+ FC_NS_RFT_ID = 0x0217, /* reg FC4 type for ID */
+ FC_NS_RPN_ID = 0x0212, /* reg port name for ID */
+ FC_NS_RNN_ID = 0x0213, /* reg node name for ID */
+};
+
+/*
+ * Port type values.
+ */
+enum fc_ns_pt {
+ FC_NS_UNID_PORT = 0x00, /* unidentified */
+ FC_NS_N_PORT = 0x01, /* N port */
+ FC_NS_NL_PORT = 0x02, /* NL port */
+ FC_NS_FNL_PORT = 0x03, /* F/NL port */
+ FC_NS_NX_PORT = 0x7f, /* Nx port */
+ FC_NS_F_PORT = 0x81, /* F port */
+ FC_NS_FL_PORT = 0x82, /* FL port */
+ FC_NS_E_PORT = 0x84, /* E port */
+ FC_NS_B_PORT = 0x85, /* B port */
+};
+
+/*
+ * Port type object.
+ */
+struct fc_ns_pt_obj {
+ __u8 pt_type;
+};
+
+/*
+ * Port ID object
+ */
+struct fc_ns_fid {
+ __u8 fp_flags; /* flags for responses only */
+ __u8 fp_fid[3];
+};
+
+/*
+ * fp_flags in port ID object, for responses only.
+ */
+#define FC_NS_FID_LAST 0x80 /* last object */
+
+/*
+ * FC4-types object.
+ */
+#define FC_NS_TYPES 256 /* number of possible FC-4 types */
+#define FC_NS_BPW 32 /* bits per word in bitmap */
+
+struct fc_ns_fts {
+ __be32 ff_type_map[FC_NS_TYPES / FC_NS_BPW]; /* bitmap of FC-4 types */
+};
+
+/*
+ * GID_PT request.
+ */
+struct fc_ns_gid_pt {
+ __u8 fn_pt_type;
+ __u8 fn_domain_id_scope;
+ __u8 fn_area_id_scope;
+ __u8 fn_resvd;
+};
+
+/*
+ * GID_FT or GPN_FT request.
+ */
+struct fc_ns_gid_ft {
+ __u8 fn_resvd;
+ __u8 fn_domain_id_scope;
+ __u8 fn_area_id_scope;
+ __u8 fn_fc4_type;
+};
+
+/*
+ * GPN_FT response.
+ */
+struct fc_gpn_ft_resp {
+ __u8 fp_flags; /* see fp_flags definitions above */
+ __u8 fp_fid[3]; /* port ID */
+ __be32 fp_resvd;
+ __be64 fp_wwpn; /* port name */
+};
+
+/*
+ * GID_PN request
+ */
+struct fc_ns_gid_pn {
+ __be64 fn_wwpn; /* port name */
+};
+
+/*
+ * GID_PN response
+ */
+struct fc_gid_pn_resp {
+ __u8 fp_resvd;
+ __u8 fp_fid[3]; /* port ID */
+};
+
+/*
+ * RFT_ID request - register FC-4 types for ID.
+ */
+struct fc_ns_rft_id {
+ struct fc_ns_fid fr_fid; /* port ID object */
+ struct fc_ns_fts fr_fts; /* FC-4 types object */
+};
+
+/*
+ * RPN_ID request - register port name for ID.
+ * RNN_ID request - register node name for ID.
+ */
+struct fc_ns_rn_id {
+ struct fc_ns_fid fr_fid; /* port ID object */
+ __be64 fr_wwn; /* node name or port name */
+} __attribute__((__packed__));
+
+#endif /* _FC_NS_H_ */
next prev parent reply other threads:[~2008-11-18 22:21 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-11-18 22:20 [PATCH 0/3] Open-FCoE Submission Robert Love
2008-11-18 22:21 ` Robert Love [this message]
2008-11-18 22:21 ` [PATCH 2/3] libfc: A modular Fibre Channel library Robert Love
2008-11-24 10:13 ` Andi Kleen
2008-11-25 20:47 ` Love, Robert W
2008-12-02 23:36 ` Love, Robert W
2008-11-18 22:21 ` [PATCH 3/3] fcoe: Fibre Channel over Ethernet Robert Love
-- strict thread matches above, loose matches on Subject: below --
2008-12-09 23:10 [PATCH 0/3] Open-FCoE Submission (round 2) Robert Love
2008-12-09 23:10 ` [PATCH 1/3] FC protocol definition header files Robert Love
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20081118222101.2289.11641.stgit@fritz \
--to=robert.w.love@intel.com \
--cc=davem@davemloft.net \
--cc=james.bottomley@hansenpartnership.com \
--cc=james.smart@emulex.com \
--cc=jeffrey.t.kirsher@intel.com \
--cc=jeykholt@cisco.com \
--cc=jgarzik@redhat.com \
--cc=linux-scsi@vger.kernel.org \
--cc=michaelc@cs.wisc.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.