From: Rusty Russell <rusty@rustcorp.com.au>
To: Dave Jones <davej@redhat.com>
Cc: Mike Travis <travis@sgi.com>, linux-kernel@vger.kernel.org
Subject: [PATCH] x86: clean up speedstep-centrino and reduce cpumask_t usage
Date: Fri, 21 Nov 2008 21:07:16 +1030 [thread overview]
Message-ID: <200811212107.16738.rusty@rustcorp.com.au> (raw)
Impact: cleanup
1) The #ifdef CONFIG_HOTPLUG_CPU seems unnecessary these days.
2) The loop can simply skip over offline cpus, rather than creating a tmp mask.
3) set_mask is set to either a single cpu or all online cpus in a policy.
Since it's just used for set_cpus_allowed(), any offline cpus in a policy
don't matter, so we can just use cpumask_of_cpu() or the policy->cpus.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Mike Travis <travis@sgi.com>
---
arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c | 51 ++++++++++-------------
1 file changed, 24 insertions(+), 27 deletions(-)
--- linux-2.6.28.orig/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c
+++ linux-2.6.28/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c
@@ -552,9 +552,7 @@ static int centrino_verify (struct cpufr
* Sets a new CPUFreq policy.
*/
struct allmasks {
- cpumask_t online_policy_cpus;
cpumask_t saved_mask;
- cpumask_t set_mask;
cpumask_t covered_cpus;
};
@@ -568,9 +566,7 @@ static int centrino_target (struct cpufr
int retval = 0;
unsigned int j, k, first_cpu, tmp;
CPUMASK_ALLOC(allmasks);
- CPUMASK_PTR(online_policy_cpus, allmasks);
CPUMASK_PTR(saved_mask, allmasks);
- CPUMASK_PTR(set_mask, allmasks);
CPUMASK_PTR(covered_cpus, allmasks);
if (unlikely(allmasks == NULL))
@@ -590,30 +586,28 @@ static int centrino_target (struct cpufr
goto out;
}
-#ifdef CONFIG_HOTPLUG_CPU
- /* cpufreq holds the hotplug lock, so we are safe from here on */
- cpus_and(*online_policy_cpus, cpu_online_map, policy->cpus);
-#else
- *online_policy_cpus = policy->cpus;
-#endif
-
*saved_mask = current->cpus_allowed;
first_cpu = 1;
cpus_clear(*covered_cpus);
- for_each_cpu_mask_nr(j, *online_policy_cpus) {
+ for_each_cpu_mask_nr(j, policy->cpus) {
+ const cpumask_t *mask;
+
+ /* cpufreq holds the hotplug lock, so we are safe here */
+ if (!cpu_online(j))
+ continue;
+
/*
* Support for SMP systems.
* Make sure we are running on CPU that wants to change freq
*/
- cpus_clear(*set_mask);
if (policy->shared_type == CPUFREQ_SHARED_TYPE_ANY)
- cpus_or(*set_mask, *set_mask, *online_policy_cpus);
+ mask = &policy->cpus;
else
- cpu_set(j, *set_mask);
+ mask = &cpumask_of_cpu(j);
- set_cpus_allowed_ptr(current, set_mask);
+ set_cpus_allowed_ptr(current, mask);
preempt_disable();
- if (unlikely(!cpu_isset(smp_processor_id(), *set_mask))) {
+ if (unlikely(!cpu_isset(smp_processor_id(), *mask))) {
dprintk("couldn't limit to CPUs in this domain\n");
retval = -EAGAIN;
if (first_cpu) {
@@ -641,7 +635,9 @@ static int centrino_target (struct cpufr
dprintk("target=%dkHz old=%d new=%d msr=%04x\n",
target_freq, freqs.old, freqs.new, msr);
- for_each_cpu_mask_nr(k, *online_policy_cpus) {
+ for_each_cpu_mask_nr(k, policy->cpus) {
+ if (!cpu_online(k))
+ continue;
freqs.cpu = k;
cpufreq_notify_transition(&freqs,
CPUFREQ_PRECHANGE);
@@ -664,7 +660,9 @@ static int centrino_target (struct cpufr
preempt_enable();
}
- for_each_cpu_mask_nr(k, *online_policy_cpus) {
+ for_each_cpu_mask_nr(k, policy->cpus) {
+ if (!cpu_online(k))
+ continue;
freqs.cpu = k;
cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
}
@@ -677,18 +675,17 @@ static int centrino_target (struct cpufr
* Best effort undo..
*/
- if (!cpus_empty(*covered_cpus))
- for_each_cpu_mask_nr(j, *covered_cpus) {
- set_cpus_allowed_ptr(current,
- &cpumask_of_cpu(j));
- wrmsr(MSR_IA32_PERF_CTL, oldmsr, h);
- }
+ for_each_cpu_mask_nr(j, *covered_cpus) {
+ set_cpus_allowed_ptr(current, &cpumask_of_cpu(j));
+ wrmsr(MSR_IA32_PERF_CTL, oldmsr, h);
+ }
tmp = freqs.new;
freqs.new = freqs.old;
freqs.old = tmp;
- for_each_cpu_mask_nr(j, *online_policy_cpus) {
- freqs.cpu = j;
+ for_each_cpu_mask_nr(j, policy->cpus) {
+ if (!cpu_online(j))
+ continue;
cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
}
reply other threads:[~2008-11-21 10:37 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200811212107.16738.rusty@rustcorp.com.au \
--to=rusty@rustcorp.com.au \
--cc=davej@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=travis@sgi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.