All of lore.kernel.org
 help / color / mirror / Atom feed
From: akpm@linux-foundation.org
To: mm-commits@vger.kernel.org
Cc: ben-linux@fluff.org, dbrownell@users.sourceforge.net
Subject: + spi-fix-spi_s3c24xx_gpio-num_chipselect.patch added to -mm tree
Date: Sat, 22 Nov 2008 13:15:48 -0800	[thread overview]
Message-ID: <200811222115.mAMLFmj8024177@imap1.linux-foundation.org> (raw)


The patch titled
     spi: fix spi_s3c24xx_gpio num_chipselect
has been added to the -mm tree.  Its filename is
     spi-fix-spi_s3c24xx_gpio-num_chipselect.patch

Before you just go and hit "reply", please:
   a) Consider who else should be cc'ed
   b) Prefer to cc a suitable mailing list as well
   c) Ideally: find the original patch on the mailing list and do a
      reply-to-all to that, adding suitable additional cc's

*** Remember to use Documentation/SubmitChecklist when testing your code ***

See http://userweb.kernel.org/~akpm/stuff/added-to-mm.txt to find
out what to do about this

The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/

------------------------------------------------------
Subject: spi: fix spi_s3c24xx_gpio num_chipselect
From: Ben Dooks <ben-linux@fluff.org>

The spi master driver must have num_chipselect set to allow the bus to
initialise.  Pass this through the platform data.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---

 arch/arm/mach-s3c2410/include/mach/spi-gpio.h |    1 +
 drivers/spi/spi_s3c24xx_gpio.c                |    1 +
 2 files changed, 2 insertions(+)

diff -puN arch/arm/mach-s3c2410/include/mach/spi-gpio.h~spi-fix-spi_s3c24xx_gpio-num_chipselect arch/arm/mach-s3c2410/include/mach/spi-gpio.h
--- a/arch/arm/mach-s3c2410/include/mach/spi-gpio.h~spi-fix-spi_s3c24xx_gpio-num_chipselect
+++ a/arch/arm/mach-s3c2410/include/mach/spi-gpio.h
@@ -18,6 +18,7 @@ struct s3c2410_spigpio_info {
 	unsigned long		 pin_mosi;
 	unsigned long		 pin_miso;
 
+	int			 num_chipselect;
 	int			 bus_num;
 
 	void (*chip_select)(struct s3c2410_spigpio_info *spi, int cs);
diff -puN drivers/spi/spi_s3c24xx_gpio.c~spi-fix-spi_s3c24xx_gpio-num_chipselect drivers/spi/spi_s3c24xx_gpio.c
--- a/drivers/spi/spi_s3c24xx_gpio.c~spi-fix-spi_s3c24xx_gpio-num_chipselect
+++ a/drivers/spi/spi_s3c24xx_gpio.c
@@ -118,6 +118,7 @@ static int s3c2410_spigpio_probe(struct 
 	/* setup spi bitbang adaptor */
 	sp->bitbang.master = spi_master_get(master);
 	sp->bitbang.master->bus_num = info->bus_num;
+	sp->bitbang.master->num_chipselect = info->num_chipselect;
 	sp->bitbang.chipselect = s3c2410_spigpio_chipselect;
 
 	sp->bitbang.txrx_word[SPI_MODE_0] = s3c2410_spigpio_txrx_mode0;
_

Patches currently in -mm which might be from ben-linux@fluff.org are

origin.patch
backlight-value-of-ili9320_rgb_if2-register-should-not-be-hardcoded.patch
spi-fix-spi_s3c24xx_gpio-device-handle-lookup.patch
spi-fix-spi_s3c24xx_gpio-num_chipselect.patch
spi-use-generic-gpio-calls-in-spi_s3c24xx_gpio.patch


                 reply	other threads:[~2008-11-22 21:16 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=200811222115.mAMLFmj8024177@imap1.linux-foundation.org \
    --to=akpm@linux-foundation.org \
    --cc=ben-linux@fluff.org \
    --cc=dbrownell@users.sourceforge.net \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mm-commits@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.