From: Yuval Hager <yuval@avramzon.net>
To: Michael Buesch <mb@bu3sch.de>
Cc: Larry Finger <Larry.Finger@lwfinger.net>,
bcm43xx-dev@lists.berlios.de, LKML <linux-kernel@vger.kernel.org>,
wireless <linux-wireless@vger.kernel.org>,
Peter Stuge <peter@stuge.se>
Subject: Re: BCM4312 Fails when xdm is started
Date: Sun, 23 Nov 2008 13:49:55 +0200 [thread overview]
Message-ID: <200811231350.00207.yuval@avramzon.net> (raw)
In-Reply-To: <200811221654.09399.mb@bu3sch.de>
[-- Attachment #1: Type: text/plain, Size: 6304 bytes --]
> It doesn't hurt to turn on all debugging options. Often you get some hint
> by doing so.
I booted with 'root=/dev/sda3 debug memory_corruption_check=1 devres.log=1 debug_objects debugpat
acpi.debug_layer=0x00410002 acpi.debug_level=0xffffffff acpi=off noapic nolapic irqpoll pci=noacpi' and issued 'xset dpms force
standby'. After touching the mouse the system locked for about a minute, and the wireless stopped working.
Here's the log portion, I hope it provides a hint of some sort:
[ 182.891400] ****** b43: B43_MMIO_MACCTL 0x840A0503
[ 182.891409] ****** b43: SSB_TMSLOW 0x20150000
[ 258.299027] irq 10: nobody cared (try booting with the "irqpoll" option)
[ 258.299038] Pid: 0, comm: swapper Not tainted 2.6.28-rc5 #15
[ 258.299043] Call Trace:
[ 258.299062] [<c0148d9a>] __report_bad_irq+0x24/0x69
[ 258.299071] [<c0148da1>] __report_bad_irq+0x2b/0x69
[ 258.299080] [<c0148ec8>] note_interrupt+0xe9/0x12d
[ 258.299090] [<c014976d>] handle_level_irq+0x87/0xba
[ 258.299101] [<c010564e>] do_IRQ+0x89/0x9f
[ 258.299109] [<c0103ea8>] common_interrupt+0x28/0x30
[ 258.299119] [<c0125406>] do_softirq+0x37/0x4d
[ 258.299127] [<c0125301>] __do_softirq+0x62/0x130
[ 258.299135] [<c0125406>] do_softirq+0x37/0x4d
[ 258.299142] [<c0105653>] do_IRQ+0x8e/0x9f
[ 258.299150] [<c0103ea8>] common_interrupt+0x28/0x30
[ 258.299161] [<c0108682>] default_idle+0x2f/0x4c
[ 258.299168] [<c0101a20>] cpu_idle+0x63/0x77
[ 258.299173] handlers:
[ 258.299176] [<f7906455>] (b43_interrupt_handler+0x0/0x1b7 [b43])
[ 258.299212] Disabling IRQ #10
[ 258.315148] b43-phy0: Radio hardware status changed to DISABLED
[ 258.315160] b43-phy0: ******** B43_B43_MMIO_RADIO_HWENABLED_HI 0xFFFFFFFF
[ 258.342341] kobject: 'rfkill0' (f43b7d78): kobject_uevent_env
[ 258.342367] kobject: 'rfkill0' (f43b7d78): fill_kobj_path: path = '/class/rfkill/rfkill0'
[ 258.342418] kobject: 'ssb0:0' (f40dfcd8): fill_kobj_path: path = '/devices/pci0000:00/0000:00:02.0/0000:02:00.0/ssb0:0'
[ 258.391951]
[ 258.391956] =================================
[ 258.391964] [ INFO: inconsistent lock state ]
[ 258.391971] 2.6.28-rc5 #15
[ 258.391975] ---------------------------------
[ 258.391980] inconsistent {in-hardirq-W} -> {hardirq-on-W} usage.
[ 258.391987] X/3965 [HC0[0]:SC1[1]:HE1:SE0] takes:
[ 258.391993] (&irq_desc_lock_class){++..}, at: [<c0148c60>] try_one_irq+0x15/0xe8
[ 258.392016] {in-hardirq-W} state was registered at:
[ 258.392021] [<c013bc07>] __lock_acquire+0x490/0x6bc
[ 258.392034] [<c013be8d>] lock_acquire+0x5a/0x74
[ 258.392043] [<c01496f8>] handle_level_irq+0x12/0xba
[ 258.392053] [<c03c4842>] _spin_lock+0x1c/0x45
[ 258.392066] [<c01496f8>] handle_level_irq+0x12/0xba
[ 258.392076] [<c01496f8>] handle_level_irq+0x12/0xba
[ 258.392085] [<c010564e>] do_IRQ+0x89/0x9f
[ 258.392096] [<c0103ea8>] common_interrupt+0x28/0x30
[ 258.392105] [<c03c4cc2>] _spin_unlock_irqrestore+0x37/0x39
[ 258.392115] [<c01487e6>] __setup_irq+0x17a/0x1f3
[ 258.392124] [<c05ce79d>] start_kernel+0x285/0x2f1
[ 258.392140] [<ffffffff>] 0xffffffff
[ 258.392159] irq event stamp: 1844456
[ 258.392164] hardirqs last enabled at (1844456): [<c03c4b6f>] _spin_unlock_irq+0x20/0x23
[ 258.392175] hardirqs last disabled at (1844455): [<c03c4ac3>] _spin_lock_irq+0xa/0x4b
[ 258.392186] softirqs last enabled at (1844310): [<c0125406>] do_softirq+0x37/0x4d
[ 258.392198] softirqs last disabled at (1844447): [<c0125406>] do_softirq+0x37/0x4d
[ 258.392208]
[ 258.392209] other info that might help us debug this:
[ 258.392215] no locks held by X/3965.
[ 258.392219]
[ 258.392220] stack backtrace:
[ 258.392226] Pid: 3965, comm: X Not tainted 2.6.28-rc5 #15
[ 258.392231] Call Trace:
[ 258.392241] [<c0139175>] print_usage_bug+0x13d/0x146
[ 258.392249] [<c013a2ff>] mark_lock+0x4b1/0x7c7
[ 258.392257] [<c013bc7e>] __lock_acquire+0x507/0x6bc
[ 258.392266] [<c013be8d>] lock_acquire+0x5a/0x74
[ 258.392275] [<c0148c60>] try_one_irq+0x15/0xe8
[ 258.392283] [<c03c4842>] _spin_lock+0x1c/0x45
[ 258.392291] [<c0148c60>] try_one_irq+0x15/0xe8
[ 258.392300] [<c0148c60>] try_one_irq+0x15/0xe8
[ 258.392308] [<c03c4b6f>] _spin_unlock_irq+0x20/0x23
[ 258.392317] [<c0148d33>] poll_spurious_irqs+0x0/0x43
[ 258.392326] [<c0148d55>] poll_spurious_irqs+0x22/0x43
[ 258.392338] [<c012874a>] run_timer_softirq+0x101/0x156
[ 258.392346] [<c0125321>] __do_softirq+0x82/0x130
[ 258.392354] [<c0125406>] do_softirq+0x37/0x4d
[ 258.392362] [<c0105653>] do_IRQ+0x8e/0x9f
[ 258.392370] [<c0103ea8>] common_interrupt+0x28/0x30
[ 260.311944] wlan0: No ProbeResp from current AP 00:22:3f:18:89:5e - assume out of range
[ 304.082520] ------------[ cut here ]------------
[ 304.082531] WARNING: at drivers/net/wireless/b43/phy_common.c:135 b43_radio_lock+0x29/0x7c [b43]()
[ 304.082538] Modules linked in: rfkill_input b43 ssb led_class input_polldev via drm rtc hci_usb snd_h
da_intel snd_pcm snd_timer snd_page_alloc snd_hwdep snd soundcore ehci_hcd uhci_hcd usbcore sg via_agp a
gpgart
[ 304.082593] Pid: 5913, comm: b43 Not tainted 2.6.28-rc5 #15
[ 304.082599] Call Trace:
[ 304.082618] [<c012171f>] warn_on_slowpath+0x40/0x59
[ 304.082643] [<f7901c94>] b43_shm_read16+0x20/0x42 [b43]
[ 304.082666] [<f7b9e4dc>] ssb_pci_read32+0x12/0x3b [ssb]
[ 304.082686] [<f7906ded>] b43_radio_lock+0x29/0x7c [b43]
[ 304.082706] [<f790b030>] b43_gphy_op_adjust_txpower+0x112/0x139 [b43]
[ 304.082727] [<f7906ba0>] b43_phy_txpower_adjust_work+0x32/0x3b [b43]
[ 304.082740] [<c012de6d>] run_workqueue+0xbf/0x192
[ 304.082748] [<c012de2f>] run_workqueue+0x81/0x192
[ 304.082767] [<f7906b6e>] b43_phy_txpower_adjust_work+0x0/0x3b [b43]
[ 304.082778] [<c012e72a>] worker_thread+0x0/0xbd
[ 304.082786] [<c012e7dd>] worker_thread+0xb3/0xbd
[ 304.082796] [<c0130bcc>] autoremove_wake_function+0x0/0x2d
[ 304.082803] [<c0130b10>] kthread+0x38/0x60
[ 304.082810] [<c0130ad8>] kthread+0x0/0x60
[ 304.082820] [<c01041c7>] kernel_thread_helper+0x7/0x10
[ 304.082826] ---[ end trace 6ecefdf7cfe131b0 ]---
[ 304.082832] ****** b43: B43_MMIO_MACCTL 0xFFFFFFFF
[ 304.082837] ****** b43: SSB_TMSLOW 0xFFFFFFFF
--yuval
[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 197 bytes --]
next prev parent reply other threads:[~2008-11-23 11:53 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <200811151801.02369.yuval@avramzon.net>
[not found] ` <491EFB9D.3040002@lwfinger.net>
[not found] ` <200811151907.05636.yuval@avramzon.net>
[not found] ` <20081115174623.27321.qmail@stuge.se>
2008-11-21 16:25 ` BCM4312 Fails when xdm is started Larry Finger
2008-11-21 17:42 ` Michael Buesch
2008-11-21 18:28 ` Larry Finger
2008-11-22 6:39 ` Yuval Hager
2008-11-22 15:13 ` Michael Buesch
2008-11-22 15:32 ` Larry Finger
2008-11-22 15:54 ` Michael Buesch
2008-11-23 7:26 ` Yuval Hager
2008-11-23 11:49 ` Yuval Hager [this message]
2008-11-23 12:20 ` Michael Buesch
2008-11-23 15:42 ` Larry Finger
2008-11-23 17:42 ` Michael Buesch
[not found] ` <200811231955.41722.yuval@avramzon.net>
2008-11-23 18:08 ` Michael Buesch
2008-11-23 20:46 ` Peter Stuge
2008-11-23 21:09 ` Larry Finger
2008-11-24 8:49 ` Yuval Hager
2008-11-24 10:55 ` Michael Buesch
2008-11-24 16:11 ` Larry Finger
2008-11-25 5:43 ` Yuval Hager
2008-11-25 7:18 ` Peter Stuge
2008-12-07 9:29 ` Yuval Hager
2008-12-07 16:15 ` Larry Finger
2008-11-25 11:05 ` Michael Buesch
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200811231350.00207.yuval@avramzon.net \
--to=yuval@avramzon.net \
--cc=Larry.Finger@lwfinger.net \
--cc=bcm43xx-dev@lists.berlios.de \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=mb@bu3sch.de \
--cc=peter@stuge.se \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.