From: Tony Lindgren <tony@atomide.com>
To: Felipe Balbi <felipe.balbi@nokia.com>
Cc: ext Roman Tereshonkov <roman.tereshonkov@nokia.com>,
linux-omap@vger.kernel.org
Subject: Re: [PATCH] SDTI: Add netlink support for debug message output.
Date: Wed, 26 Nov 2008 09:26:23 -0800 [thread overview]
Message-ID: <20081126172621.GM11997@atomide.com> (raw)
In-Reply-To: <20081118132644.GX20808@gandalf.research.nokia.com>
* Felipe Balbi <felipe.balbi@nokia.com> [081118 05:27]:
> On Wed, Oct 29, 2008 at 01:39:28PM +0200, Tereshonkov Roman wrote:
> > Add support for user to use netlink for message output to XTI.
> > Add autoidle feature if SDTI is not used.
> >
> > Signed-off-by: Roman Tereshonkov <roman.tereshonkov@nokia.com>
>
> Acked-by: Felipe Balbi <felipe.balbi@nokia.com>
Pushing to l-o today. Roman, do you have any plans to submit this for
integration on LKML? The OMAP_TAG_STI_CONSOLE would need to be removed
for mainline and be replaced with cmdline parsing for console=...
Tony
>
> > ---
> > drivers/misc/sti/Makefile | 2 +-
> > drivers/misc/sti/sdti.c | 14 ++++++++++----
> > drivers/misc/sti/sti-netlink.c | 8 +++++++-
> > 3 files changed, 18 insertions(+), 6 deletions(-)
> >
> > diff --git a/drivers/misc/sti/Makefile b/drivers/misc/sti/Makefile
> > index aee30bd..43574d1 100644
> > --- a/drivers/misc/sti/Makefile
> > +++ b/drivers/misc/sti/Makefile
> > @@ -2,7 +2,7 @@ ifeq ($(CONFIG_ARCH_OMAP3),y)
> > obj-$(CONFIG_OMAP_STI) += sdti.o
> > else
> > obj-$(CONFIG_OMAP_STI) += sti.o sti-fifo.o
> > -obj-$(CONFIG_NET) += sti-netlink.o
> > endif
> >
> > +obj-$(CONFIG_NET) += sti-netlink.o
> > obj-$(CONFIG_OMAP_STI_CONSOLE) += sti-console.o
> > diff --git a/drivers/misc/sti/sdti.c b/drivers/misc/sti/sdti.c
> > index 4514783..92ce57b 100644
> > --- a/drivers/misc/sti/sdti.c
> > +++ b/drivers/misc/sti/sdti.c
> > @@ -31,11 +31,14 @@
> > #define CPU1_TRACE_EN 0x01
> > #define CPU2_TRACE_EN 0x02
> >
> > +#define SDTI_SYSCONFIG_SOFTRESET (1 << 1)
> > +#define SDTI_SYSCONFIG_AUTOIDLE (1 << 0)
> > +
> > static struct clk *sdti_ck;
> > void __iomem *sti_base, *sti_channel_base;
> > static DEFINE_SPINLOCK(sdti_lock);
> >
> > -void omap_sti_channel_write_trace(int len, int id, void *data,
> > +void sti_channel_write_trace(int len, int id, void *data,
> > unsigned int channel)
> > {
> > const u8 *tpntr = data;
> > @@ -49,13 +52,13 @@ void omap_sti_channel_write_trace(int len, int id, void *data,
> >
> > spin_unlock_irq(&sdti_lock);
> > }
> > -EXPORT_SYMBOL(omap_sti_channel_write_trace);
> > +EXPORT_SYMBOL(sti_channel_write_trace);
> >
> > static void omap_sdti_reset(void)
> > {
> > int i;
> >
> > - sti_writel(0x02, SDTI_SYSCONFIG);
> > + sti_writel(SDTI_SYSCONFIG_SOFTRESET, SDTI_SYSCONFIG);
> >
> > for (i = 0; i < 10000; i++)
> > if (sti_readl(SDTI_SYSSTATUS) & 1)
> > @@ -79,6 +82,9 @@ static int __init omap_sdti_init(void)
> > omap_sdti_reset();
> > sti_writel(0xC5ACCE55, SDTI_LOCK_ACCESS);
> >
> > + /* Autoidle */
> > + sti_writel(SDTI_SYSCONFIG_AUTOIDLE, SDTI_SYSCONFIG);
> > +
> > /* Claim SDTI */
> > sti_writel(1 << 30, SDTI_WINCTRL);
> > i = sti_readl(SDTI_WINCTRL);
> > @@ -99,7 +105,7 @@ static int __init omap_sdti_init(void)
> > snprintf(buf, sizeof(buf), "OMAP SDTI support loaded (HW v%u.%u)\n",
> > (i >> 4) & 0x0f, i & 0x0f);
> > printk(KERN_INFO "%s", buf);
> > - omap_sti_channel_write_trace(strlen(buf), 0xc3, buf, 239);
> > + sti_channel_write_trace(strlen(buf), 0xc3, buf, 239);
> >
> > return 0;
> > }
> > diff --git a/drivers/misc/sti/sti-netlink.c b/drivers/misc/sti/sti-netlink.c
> > index f1f8a48..b198e4c 100644
> > --- a/drivers/misc/sti/sti-netlink.c
> > +++ b/drivers/misc/sti/sti-netlink.c
> > @@ -25,6 +25,7 @@ enum {
> > STI_WRITE,
> > };
> >
> > +#if defined(CONFIG_ARCH_OMAP1) || defined(CONFIG_ARCH_OMAP2)
> > static int sti_netlink_read(int pid, int seq, void *payload, int size)
> > {
> > struct sk_buff *skb;
> > @@ -55,6 +56,7 @@ nlmsg_failure:
> >
> > return -EINVAL;
> > }
> > +#endif
> >
> > /*
> > * We abuse nlmsg_type and nlmsg_flags for our purposes.
> > @@ -66,7 +68,7 @@ static int sti_netlink_receive_msg(struct sk_buff *skb, struct nlmsghdr *nlh)
> > {
> > void *data;
> > u8 chan, id;
> > - int size, ret = 0, len = 0;
> > + int size, ret = 0;
> >
> > data = NLMSG_DATA(nlh);
> > chan = (nlh->nlmsg_flags >> 8) & 0xff;
> > @@ -77,7 +79,10 @@ static int sti_netlink_receive_msg(struct sk_buff *skb, struct nlmsghdr *nlh)
> > case STI_WRITE:
> > sti_channel_write_trace(size, id, data, chan);
> > break;
> > +#if defined(CONFIG_ARCH_OMAP1) || defined(CONFIG_ARCH_OMAP2)
> > case STI_READ:
> > + int len = 0;
> > +
> > data = kmalloc(size, GFP_KERNEL);
> > if (!data)
> > return -ENOMEM;
> > @@ -88,6 +93,7 @@ static int sti_netlink_receive_msg(struct sk_buff *skb, struct nlmsghdr *nlh)
> > data, len);
> > kfree(data);
> > break;
> > +#endif
> > default:
> > return -ENOTTY;
> > }
> > --
> > 1.5.5.1
> >
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> > the body of a message to majordomo@vger.kernel.org
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
>
> --
> balbi
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
prev parent reply other threads:[~2008-11-26 17:26 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-10-29 11:39 [PATCH] SDTI: Add netlink support for debug message output Roman Tereshonkov
2008-11-18 13:26 ` Felipe Balbi
2008-11-26 17:26 ` Tony Lindgren [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20081126172621.GM11997@atomide.com \
--to=tony@atomide.com \
--cc=felipe.balbi@nokia.com \
--cc=linux-omap@vger.kernel.org \
--cc=roman.tereshonkov@nokia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.