From: Martin Schwidefsky <schwidefsky@de.ibm.com>
To: linux-kernel@vger.kernel.org, linux-s390@vger.kernel.org
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>,
Martin Schwidefsky <schwidefsky@de.ibm.com>
Subject: [patch 04/60] convert etr/stp to stop_machine interface
Date: Thu, 27 Nov 2008 11:30:24 +0100 [thread overview]
Message-ID: <20081127103128.739679001@de.ibm.com> (raw)
In-Reply-To: 20081127103020.528516828@de.ibm.com
[-- Attachment #1: 103-stop-machine-etr.diff --]
[-- Type: text/plain, Size: 11965 bytes --]
From: Heiko Carstens <heiko.carstens@de.ibm.com>
This converts the etr and stp code to the new stop_machine interface
which allows to synchronize all cpus without allocating any memory.
This way we get rid of the only reason why we haven't converted s390
to the generic IPI interface yet.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
arch/s390/kernel/time.c | 212 +++++++++++++++++++++++++++++-------------------
1 file changed, 131 insertions(+), 81 deletions(-)
Index: quilt-2.6/arch/s390/kernel/time.c
===================================================================
--- quilt-2.6.orig/arch/s390/kernel/time.c
+++ quilt-2.6/arch/s390/kernel/time.c
@@ -20,6 +20,8 @@
#include <linux/string.h>
#include <linux/mm.h>
#include <linux/interrupt.h>
+#include <linux/cpu.h>
+#include <linux/stop_machine.h>
#include <linux/time.h>
#include <linux/sysdev.h>
#include <linux/delay.h>
@@ -391,6 +393,15 @@ static void enable_sync_clock(void)
atomic_set_mask(0x80000000, sw_ptr);
}
+/* Single threaded workqueue used for etr and stp sync events */
+static struct workqueue_struct *time_sync_wq;
+
+static void __init time_init_wq(void)
+{
+ if (!time_sync_wq)
+ time_sync_wq = create_singlethread_workqueue("timesync");
+}
+
/*
* External Time Reference (ETR) code.
*/
@@ -483,17 +494,18 @@ static int __init etr_init(void)
if (!test_bit(CLOCK_SYNC_HAS_ETR, &clock_sync_flags))
return 0;
+ time_init_wq();
/* Check if this machine has the steai instruction. */
if (etr_steai(&aib, ETR_STEAI_STEPPING_PORT) == 0)
etr_steai_available = 1;
setup_timer(&etr_timer, etr_timeout, 0UL);
if (etr_port0_online) {
set_bit(ETR_EVENT_PORT0_CHANGE, &etr_events);
- schedule_work(&etr_work);
+ queue_work(time_sync_wq, &etr_work);
}
if (etr_port1_online) {
set_bit(ETR_EVENT_PORT1_CHANGE, &etr_events);
- schedule_work(&etr_work);
+ queue_work(time_sync_wq, &etr_work);
}
return 0;
}
@@ -520,7 +532,7 @@ void etr_switch_to_local(void)
if (test_bit(CLOCK_SYNC_ETR, &clock_sync_flags))
disable_sync_clock(NULL);
set_bit(ETR_EVENT_SWITCH_LOCAL, &etr_events);
- schedule_work(&etr_work);
+ queue_work(time_sync_wq, &etr_work);
}
/*
@@ -536,7 +548,7 @@ void etr_sync_check(void)
if (test_bit(CLOCK_SYNC_ETR, &clock_sync_flags))
disable_sync_clock(NULL);
set_bit(ETR_EVENT_SYNC_CHECK, &etr_events);
- schedule_work(&etr_work);
+ queue_work(time_sync_wq, &etr_work);
}
/*
@@ -560,13 +572,13 @@ static void etr_timing_alert(struct etr_
* Both ports are not up-to-date now.
*/
set_bit(ETR_EVENT_PORT_ALERT, &etr_events);
- schedule_work(&etr_work);
+ queue_work(time_sync_wq, &etr_work);
}
static void etr_timeout(unsigned long dummy)
{
set_bit(ETR_EVENT_UPDATE, &etr_events);
- schedule_work(&etr_work);
+ queue_work(time_sync_wq, &etr_work);
}
/*
@@ -673,14 +685,16 @@ static int etr_aib_follows(struct etr_ai
}
struct clock_sync_data {
+ atomic_t cpus;
int in_sync;
unsigned long long fixup_cc;
+ int etr_port;
+ struct etr_aib *etr_aib;
};
-static void clock_sync_cpu_start(void *dummy)
+static void clock_sync_cpu(struct clock_sync_data *sync)
{
- struct clock_sync_data *sync = dummy;
-
+ atomic_dec(&sync->cpus);
enable_sync_clock();
/*
* This looks like a busy wait loop but it isn't. etr_sync_cpus
@@ -706,39 +720,35 @@ static void clock_sync_cpu_start(void *d
fixup_clock_comparator(sync->fixup_cc);
}
-static void clock_sync_cpu_end(void *dummy)
-{
-}
-
/*
* Sync the TOD clock using the port refered to by aibp. This port
* has to be enabled and the other port has to be disabled. The
* last eacr update has to be more than 1.6 seconds in the past.
*/
-static int etr_sync_clock(struct etr_aib *aib, int port)
+static int etr_sync_clock(void *data)
{
- struct etr_aib *sync_port;
- struct clock_sync_data etr_sync;
+ static int first;
unsigned long long clock, old_clock, delay, delta;
- int follows;
+ struct clock_sync_data *etr_sync;
+ struct etr_aib *sync_port, *aib;
+ int port;
int rc;
- /* Check if the current aib is adjacent to the sync port aib. */
- sync_port = (port == 0) ? &etr_port0 : &etr_port1;
- follows = etr_aib_follows(sync_port, aib, port);
- memcpy(sync_port, aib, sizeof(*aib));
- if (!follows)
- return -EAGAIN;
+ etr_sync = data;
- /*
- * Catch all other cpus and make them wait until we have
- * successfully synced the clock. smp_call_function will
- * return after all other cpus are in etr_sync_cpu_start.
- */
- memset(&etr_sync, 0, sizeof(etr_sync));
- preempt_disable();
- smp_call_function(clock_sync_cpu_start, &etr_sync, 0);
- local_irq_disable();
+ if (xchg(&first, 1) == 1) {
+ /* Slave */
+ clock_sync_cpu(etr_sync);
+ return 0;
+ }
+
+ /* Wait until all other cpus entered the sync function. */
+ while (atomic_read(&etr_sync->cpus) != 0)
+ cpu_relax();
+
+ port = etr_sync->etr_port;
+ aib = etr_sync->etr_aib;
+ sync_port = (port == 0) ? &etr_port0 : &etr_port1;
enable_sync_clock();
/* Set clock to next OTE. */
@@ -755,16 +765,16 @@ static int etr_sync_clock(struct etr_aib
delay = (unsigned long long)
(aib->edf2.etv - sync_port->edf2.etv) << 32;
delta = adjust_time(old_clock, clock, delay);
- etr_sync.fixup_cc = delta;
+ etr_sync->fixup_cc = delta;
fixup_clock_comparator(delta);
/* Verify that the clock is properly set. */
if (!etr_aib_follows(sync_port, aib, port)) {
/* Didn't work. */
disable_sync_clock(NULL);
- etr_sync.in_sync = -EAGAIN;
+ etr_sync->in_sync = -EAGAIN;
rc = -EAGAIN;
} else {
- etr_sync.in_sync = 1;
+ etr_sync->in_sync = 1;
rc = 0;
}
} else {
@@ -772,12 +782,33 @@ static int etr_sync_clock(struct etr_aib
__ctl_clear_bit(0, 29);
__ctl_clear_bit(14, 21);
disable_sync_clock(NULL);
- etr_sync.in_sync = -EAGAIN;
+ etr_sync->in_sync = -EAGAIN;
rc = -EAGAIN;
}
- local_irq_enable();
- smp_call_function(clock_sync_cpu_end, NULL, 0);
- preempt_enable();
+ xchg(&first, 0);
+ return rc;
+}
+
+static int etr_sync_clock_stop(struct etr_aib *aib, int port)
+{
+ struct clock_sync_data etr_sync;
+ struct etr_aib *sync_port;
+ int follows;
+ int rc;
+
+ /* Check if the current aib is adjacent to the sync port aib. */
+ sync_port = (port == 0) ? &etr_port0 : &etr_port1;
+ follows = etr_aib_follows(sync_port, aib, port);
+ memcpy(sync_port, aib, sizeof(*aib));
+ if (!follows)
+ return -EAGAIN;
+ memset(&etr_sync, 0, sizeof(etr_sync));
+ etr_sync.etr_aib = aib;
+ etr_sync.etr_port = port;
+ get_online_cpus();
+ atomic_set(&etr_sync.cpus, num_online_cpus() - 1);
+ rc = stop_machine(etr_sync_clock, &etr_sync, &cpu_online_map);
+ put_online_cpus();
return rc;
}
@@ -934,7 +965,7 @@ static void etr_update_eacr(struct etr_e
}
/*
- * ETR tasklet. In this function you'll find the main logic. In
+ * ETR work. In this function you'll find the main logic. In
* particular this is the only function that calls etr_update_eacr(),
* it "controls" the etr control register.
*/
@@ -1067,7 +1098,7 @@ static void etr_work_fn(struct work_stru
etr_update_eacr(eacr);
set_bit(CLOCK_SYNC_ETR, &clock_sync_flags);
if (now < etr_tolec + (1600000 << 12) ||
- etr_sync_clock(&aib, sync_port) != 0) {
+ etr_sync_clock_stop(&aib, sync_port) != 0) {
/* Sync failed. Try again in 1/2 second. */
eacr.es = 0;
etr_update_eacr(eacr);
@@ -1156,13 +1187,13 @@ static ssize_t etr_online_store(struct s
return count; /* Nothing to do. */
etr_port0_online = value;
set_bit(ETR_EVENT_PORT0_CHANGE, &etr_events);
- schedule_work(&etr_work);
+ queue_work(time_sync_wq, &etr_work);
} else {
if (etr_port1_online == value)
return count; /* Nothing to do. */
etr_port1_online = value;
set_bit(ETR_EVENT_PORT1_CHANGE, &etr_events);
- schedule_work(&etr_work);
+ queue_work(time_sync_wq, &etr_work);
}
return count;
}
@@ -1396,8 +1427,12 @@ static void __init stp_reset(void)
static int __init stp_init(void)
{
- if (test_bit(CLOCK_SYNC_HAS_STP, &clock_sync_flags) && stp_online)
- schedule_work(&stp_work);
+ if (!test_bit(CLOCK_SYNC_HAS_STP, &clock_sync_flags))
+ return 0;
+ time_init_wq();
+ if (!stp_online)
+ return 0;
+ queue_work(time_sync_wq, &stp_work);
return 0;
}
@@ -1414,7 +1449,7 @@ arch_initcall(stp_init);
static void stp_timing_alert(struct stp_irq_parm *intparm)
{
if (intparm->tsc || intparm->lac || intparm->tcpc)
- schedule_work(&stp_work);
+ queue_work(time_sync_wq, &stp_work);
}
/*
@@ -1428,7 +1463,7 @@ void stp_sync_check(void)
if (!test_bit(CLOCK_SYNC_STP, &clock_sync_flags))
return;
disable_sync_clock(NULL);
- schedule_work(&stp_work);
+ queue_work(time_sync_wq, &stp_work);
}
/*
@@ -1442,46 +1477,34 @@ void stp_island_check(void)
if (!test_bit(CLOCK_SYNC_STP, &clock_sync_flags))
return;
disable_sync_clock(NULL);
- schedule_work(&stp_work);
+ queue_work(time_sync_wq, &stp_work);
}
-/*
- * STP tasklet. Check for the STP state and take over the clock
- * synchronization if the STP clock source is usable.
- */
-static void stp_work_fn(struct work_struct *work)
+
+static int stp_sync_clock(void *data)
{
- struct clock_sync_data stp_sync;
+ static int first;
unsigned long long old_clock, delta;
+ struct clock_sync_data *stp_sync;
int rc;
- if (!stp_online) {
- chsc_sstpc(stp_page, STP_OP_CTRL, 0x0000);
- return;
- }
+ stp_sync = data;
- rc = chsc_sstpc(stp_page, STP_OP_CTRL, 0xb0e0);
- if (rc)
- return;
+ if (xchg(&first, 1) == 1) {
+ /* Slave */
+ clock_sync_cpu(stp_sync);
+ return 0;
+ }
- rc = chsc_sstpi(stp_page, &stp_info, sizeof(struct stp_sstpi));
- if (rc || stp_info.c == 0)
- return;
+ /* Wait until all other cpus entered the sync function. */
+ while (atomic_read(&stp_sync->cpus) != 0)
+ cpu_relax();
- /*
- * Catch all other cpus and make them wait until we have
- * successfully synced the clock. smp_call_function will
- * return after all other cpus are in clock_sync_cpu_start.
- */
- memset(&stp_sync, 0, sizeof(stp_sync));
- preempt_disable();
- smp_call_function(clock_sync_cpu_start, &stp_sync, 0);
- local_irq_disable();
enable_sync_clock();
set_bit(CLOCK_SYNC_STP, &clock_sync_flags);
if (test_and_clear_bit(CLOCK_SYNC_ETR, &clock_sync_flags))
- schedule_work(&etr_work);
+ queue_work(time_sync_wq, &etr_work);
rc = 0;
if (stp_info.todoff[0] || stp_info.todoff[1] ||
@@ -1500,16 +1523,43 @@ static void stp_work_fn(struct work_stru
}
if (rc) {
disable_sync_clock(NULL);
- stp_sync.in_sync = -EAGAIN;
+ stp_sync->in_sync = -EAGAIN;
clear_bit(CLOCK_SYNC_STP, &clock_sync_flags);
if (etr_port0_online || etr_port1_online)
- schedule_work(&etr_work);
+ queue_work(time_sync_wq, &etr_work);
} else
- stp_sync.in_sync = 1;
+ stp_sync->in_sync = 1;
+ xchg(&first, 0);
+ return 0;
+}
- local_irq_enable();
- smp_call_function(clock_sync_cpu_end, NULL, 0);
- preempt_enable();
+/*
+ * STP work. Check for the STP state and take over the clock
+ * synchronization if the STP clock source is usable.
+ */
+static void stp_work_fn(struct work_struct *work)
+{
+ struct clock_sync_data stp_sync;
+ int rc;
+
+ if (!stp_online) {
+ chsc_sstpc(stp_page, STP_OP_CTRL, 0x0000);
+ return;
+ }
+
+ rc = chsc_sstpc(stp_page, STP_OP_CTRL, 0xb0e0);
+ if (rc)
+ return;
+
+ rc = chsc_sstpi(stp_page, &stp_info, sizeof(struct stp_sstpi));
+ if (rc || stp_info.c == 0)
+ return;
+
+ memset(&stp_sync, 0, sizeof(stp_sync));
+ get_online_cpus();
+ atomic_set(&stp_sync.cpus, num_online_cpus() - 1);
+ stop_machine(stp_sync_clock, &stp_sync, &cpu_online_map);
+ put_online_cpus();
}
/*
@@ -1618,7 +1668,7 @@ static ssize_t stp_online_store(struct s
if (!test_bit(CLOCK_SYNC_HAS_STP, &clock_sync_flags))
return -EOPNOTSUPP;
stp_online = value;
- schedule_work(&stp_work);
+ queue_work(time_sync_wq, &stp_work);
return count;
}
--
blue skies,
Martin.
"Reality continues to ruin my life." - Calvin.
next prev parent reply other threads:[~2008-11-27 10:30 UTC|newest]
Thread overview: 61+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-11-27 10:30 [patch 00/60] s390 feature patches for 2.6.29 Martin Schwidefsky
2008-11-27 10:30 ` [patch 01/60] vmcp: remove BKL Martin Schwidefsky
2008-11-27 10:30 ` [patch 02/60] arch_setup_additional_pages arguments Martin Schwidefsky
2008-11-27 10:30 ` [patch 03/60] introduce vdso on s390 Martin Schwidefsky
2008-11-27 10:30 ` Martin Schwidefsky [this message]
2008-11-27 10:30 ` [patch 05/60] serialize stp/etr work Martin Schwidefsky
2008-11-27 10:30 ` [patch 06/60] convert s390 to generic IPI infrastructure Martin Schwidefsky
2008-11-27 10:30 ` [patch 07/60] Move stfle to header file Martin Schwidefsky
2008-11-27 10:30 ` [patch 08/60] zcrypt: Use of Thin Interrupts Martin Schwidefsky
2008-11-27 10:30 ` [patch 09/60] ap: Minor code beautification Martin Schwidefsky
2008-11-27 10:30 ` [patch 10/60] qdio: fix qeth port count detection Martin Schwidefsky
2008-11-27 10:30 ` [patch 11/60] qdio: add eqbs/sqbs instruction counters Martin Schwidefsky
2008-11-27 10:30 ` [patch 12/60] qdio: fix compile warning under 31 bit Martin Schwidefsky
2008-11-27 10:30 ` [patch 13/60] qdio: rework debug feature logging Martin Schwidefsky
2008-11-27 10:30 ` [patch 14/60] qdio: improve error handling for unexpected buffer states Martin Schwidefsky
2008-11-27 10:30 ` [patch 15/60] qdio: improve inbound buffer acknowledgement Martin Schwidefsky
2008-11-27 10:30 ` [patch 16/60] service level interface Martin Schwidefsky
2008-11-27 10:30 ` [patch 17/60] zfcp: Report microcode level through " Martin Schwidefsky
2008-11-27 10:30 ` [patch 18/60] dasd: improve dasd statistics proc interface Martin Schwidefsky
2008-11-27 10:30 ` [patch 19/60] struct device - replace bus_id with dev_name(), dev_set_name() Martin Schwidefsky
2008-11-27 10:30 ` [patch 20/60] iucv: Locking free version of iucv_message_(receive|send) Martin Schwidefsky
2008-11-27 10:30 ` [patch 21/60] s390/hvc_console: z/VM IUCV hypervisor console support Martin Schwidefsky
2008-11-27 10:30 ` [patch 22/60] ftrace: function tracer backend for s390 Martin Schwidefsky
2008-11-27 10:30 ` [patch 23/60] __page_to_pfn warnings Martin Schwidefsky
2008-11-27 10:30 ` [patch 24/60] remove ptrace warning on 31 bit Martin Schwidefsky
2008-11-27 10:30 ` [patch 25/60] cio: get rid of compile warning Martin Schwidefsky
2008-11-27 10:30 ` [patch 26/60] mark disabled_wait as noreturn function Martin Schwidefsky
2008-11-27 10:30 ` [patch 27/60] remove warnings with functions ending in BUG Martin Schwidefsky
2008-11-27 10:30 ` [patch 28/60] sclp vt220: fix compile warning Martin Schwidefsky
2008-11-27 10:30 ` [patch 29/60] Add processor type march=z10 and a processor type safety check Martin Schwidefsky
2008-11-27 10:30 ` [patch 30/60] dasd: Use accessors instead of using driver_data directly Martin Schwidefsky
2008-11-27 10:30 ` [patch 31/60] cio: update sac values Martin Schwidefsky
2008-11-27 10:30 ` [patch 32/60] Remove initial kernel stack backchain initialization Martin Schwidefsky
2008-11-27 10:30 ` [patch 33/60] cio: move irritating comment Martin Schwidefsky
2008-11-27 10:30 ` [patch 34/60] add new machine types to setup_hwcaps Martin Schwidefsky
2008-11-27 10:30 ` [patch 35/60] convert xpram printks to pr_xxx macros Martin Schwidefsky
2008-11-27 10:30 ` [patch 36/60] convert vmcp " Martin Schwidefsky
2008-11-27 10:30 ` [patch 37/60] convert lcs printks to dev_xxx and " Martin Schwidefsky
2008-11-27 10:30 ` [patch 38/60] convert cpcmd printks to " Martin Schwidefsky
2008-11-27 10:30 ` [patch 39/60] convert vmur " Martin Schwidefsky
2008-11-27 10:31 ` [patch 40/60] convert cio " Martin Schwidefsky
2008-11-27 10:31 ` [patch 41/60] convert cpacf " Martin Schwidefsky
2008-11-27 10:31 ` [patch 42/60] convert time " Martin Schwidefsky
2008-11-27 10:31 ` [patch 43/60] convert hypfs " Martin Schwidefsky
2008-11-27 10:31 ` [patch 44/60] convert setup " Martin Schwidefsky
2008-11-27 10:31 ` [patch 45/60] convert appldata " Martin Schwidefsky
2008-11-27 10:31 ` [patch 46/60] convert monreader " Martin Schwidefsky
2008-11-27 10:31 ` [patch 47/60] convert s390 debug feature " Martin Schwidefsky
2008-11-27 10:31 ` [patch 48/60] convert monwriter " Martin Schwidefsky
2008-11-27 10:31 ` [patch 49/60] convert dcssblk and extmem printks messages " Martin Schwidefsky
2008-11-27 10:31 ` [patch 50/60] convert ap_bus printks " Martin Schwidefsky
2008-11-27 10:31 ` [patch 51/60] convert iucv printks to dev_xxx and " Martin Schwidefsky
2008-11-27 10:31 ` [patch 52/60] convert sclp printks to " Martin Schwidefsky
2008-11-27 10:31 ` [patch 53/60] convert qeth printks to dev_xxx and " Martin Schwidefsky
2008-11-27 10:31 ` [patch 54/60] convert cpu related printks to " Martin Schwidefsky
2008-11-27 10:31 ` [patch 55/60] convert zfcp dumper " Martin Schwidefsky
2008-11-27 10:31 ` [patch 56/60] convert vmlogrdr " Martin Schwidefsky
2008-11-27 10:31 ` [patch 57/60] convert zfcp " Martin Schwidefsky
2008-11-27 10:31 ` [patch 58/60] convert ctcm printks to dev_xxx and " Martin Schwidefsky
2008-11-27 10:31 ` [patch 59/60] provide documentation for hvc_iucv printk & kernel parameter Martin Schwidefsky
2008-11-27 10:31 ` [patch 60/60] tape message cleanup Martin Schwidefsky
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20081127103128.739679001@de.ibm.com \
--to=schwidefsky@de.ibm.com \
--cc=heiko.carstens@de.ibm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-s390@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.