From: Tony Lindgren <tony@atomide.com>
To: linux-i2c@vger.kernel.org, ben-linux@fluff.org
Cc: linux-omap@vger.kernel.org
Subject: [PATCH 08/12] i2c-omap: Clean-up i2c-omap
Date: Fri, 28 Nov 2008 17:34:43 -0800 [thread overview]
Message-ID: <20081129013443.13428.41997.stgit@localhost> (raw)
In-Reply-To: <20081129013318.13428.88465.stgit@localhost>
Minor sparse, checkpatch and formatting clean-up. Also update copyrights.
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
drivers/i2c/busses/i2c-omap.c | 31 ++++++++++++++++++-------------
1 files changed, 18 insertions(+), 13 deletions(-)
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 195c3d1..4aeebad 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -2,13 +2,16 @@
* TI OMAP I2C master mode driver
*
* Copyright (C) 2003 MontaVista Software, Inc.
- * Copyright (C) 2004 Texas Instruments.
- *
- * Updated to work with multiple I2C interfaces on 24xx by
- * Tony Lindgren <tony@atomide.com> and Imre Deak <imre.deak@nokia.com>
* Copyright (C) 2005 Nokia Corporation
+ * Copyright (C) 2004 - 2007 Texas Instruments.
*
- * Cleaned up by Juha Yrjölä <juha.yrjola@nokia.com>
+ * Originally written by MontaVista Software, Inc.
+ * Additional contributions by:
+ * Tony Lindgren <tony@atomide.com>
+ * Imre Deak <imre.deak@nokia.com>
+ * Juha Yrjölä <juha.yrjola@solidboot.com>
+ * Syed Khasim <x0khasim@ti.com>
+ * Nishant Menon <nm@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -33,8 +36,7 @@
#include <linux/completion.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
-
-#include <asm/io.h>
+#include <linux/io.h>
/* timeout waiting for the controller to respond */
#define OMAP_I2C_TIMEOUT (msecs_to_jiffies(1000))
@@ -204,7 +206,7 @@ static void omap_i2c_idle(struct omap_i2c_dev *dev)
dev->iestate = omap_i2c_read_reg(dev, OMAP_I2C_IE_REG);
omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, 0);
if (dev->rev1) {
- iv = omap_i2c_read_reg(dev, OMAP_I2C_IV_REG); /* Read clears */
+ iv = omap_i2c_read_reg(dev, OMAP_I2C_IV_REG); /* Read clears */
} else {
omap_i2c_write_reg(dev, OMAP_I2C_STAT_REG, dev->iestate);
@@ -321,9 +323,9 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
/* Enable interrupts */
omap_i2c_write_reg(dev, OMAP_I2C_IE_REG,
- (OMAP_I2C_IE_XRDY | OMAP_I2C_IE_RRDY |
- OMAP_I2C_IE_ARDY | OMAP_I2C_IE_NACK |
- OMAP_I2C_IE_AL) | ((dev->fifo_size) ?
+ (OMAP_I2C_IE_XRDY | OMAP_I2C_IE_RRDY |
+ OMAP_I2C_IE_ARDY | OMAP_I2C_IE_NACK |
+ OMAP_I2C_IE_AL) | ((dev->fifo_size) ?
(OMAP_I2C_IE_RDR | OMAP_I2C_IE_XDR) : 0));
return 0;
}
@@ -389,8 +391,10 @@ static int omap_i2c_xfer_msg(struct i2c_adapter *adap,
w |= OMAP_I2C_CON_XA;
if (!(msg->flags & I2C_M_RD))
w |= OMAP_I2C_CON_TRX;
+
if (!dev->b_hw && stop)
w |= OMAP_I2C_CON_STP;
+
omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, w);
/*
@@ -468,7 +472,8 @@ omap_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
omap_i2c_unidle(dev);
- if ((r = omap_i2c_wait_for_bb(dev)) < 0)
+ r = omap_i2c_wait_for_bb(dev);
+ if (r < 0)
goto out;
for (i = 0; i < num; i++) {
@@ -561,7 +566,7 @@ omap_i2c_rev1_isr(int this_irq, void *dev_id)
return IRQ_HANDLED;
}
#else
-#define omap_i2c_rev1_isr 0
+#define omap_i2c_rev1_isr NULL
#endif
static irqreturn_t
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2008-11-29 1:34 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-11-29 1:33 [PATCH 00/12] Updates for i2c-omap for 2.6.29 merge window, v5 Tony Lindgren
2008-11-29 1:33 ` [PATCH 01/12] i2c-omap: Do not use interruptible wait call in omap_i2c_xfer_msg Tony Lindgren
2008-11-29 1:34 ` [PATCH 02/12] i2c-omap: Close suspected race between omap_i2c_idle() and omap_i2c_isr() Tony Lindgren
2008-11-29 1:34 ` [PATCH 03/12] i2c-omap: Add high-speed support to omap-i2c Tony Lindgren
2008-11-29 1:34 ` [PATCH 04/12] i2c-omap: FIFO handling support and broken hw workaround for i2c-omap Tony Lindgren
2008-11-29 1:34 ` [PATCH 05/12] i2c-omap: Add support for omap34xx Tony Lindgren
2008-11-29 1:34 ` [PATCH 06/12] i2c-omap: Mark init-only functions as __init Tony Lindgren
2008-11-29 1:34 ` [PATCH 07/12] i2c-omap: Don't compile in OMAP15xx I2C ISR for non-OMAP15xx builds Tony Lindgren
2008-11-29 1:34 ` Tony Lindgren [this message]
2008-11-29 1:34 ` [PATCH 09/12] i2c-omap: fix I2C timeouts due to recursive omap_i2c_{un, }idle() Tony Lindgren
2008-11-29 1:34 ` [PATCH 10/12] i2c-omap: convert 'rev1' flag to generic 'rev' u8 Tony Lindgren
2008-12-16 21:59 ` Ben Dooks
2008-12-16 22:07 ` Ben Dooks
2008-12-16 21:34 ` Tony Lindgren
2008-11-29 1:35 ` [PATCH 11/12] i2c-omap: reprogram OCP_SYSCONFIG register after reset Tony Lindgren
2008-11-29 1:35 ` [PATCH 12/12] i2c-omap: Enable I2C wakeups for 34xx Tony Lindgren
2008-11-29 1:56 ` git-pull request for i2c-omap updates (Re: [PATCH 00/12] Updates for i2c-omap for 2.6.29 merge window, v5) Tony Lindgren
[not found] ` <20081129015611.GK6640-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
2008-12-05 0:25 ` Ben Dooks
-- strict thread matches above, loose matches on Subject: below --
2008-11-29 1:28 [PATCH 00/12] Updates for i2c-omap for 2.6.29 merge window, v4 Tony Lindgren
2008-11-29 1:29 ` [PATCH 08/12] i2c-omap: Clean-up i2c-omap Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20081129013443.13428.41997.stgit@localhost \
--to=tony@atomide.com \
--cc=ben-linux@fluff.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.