[RFC 7/8] Call early_param earlier.

[Rusty Russell <rusty@rustcorp.com.au>]

We delete all the arch calls: we call it from start_kernel earlier
now.  We also no longer take a temporary copy, but parse in place.

Note: this probably breaks IA64.  There's a comment which says machvec
needs to be set before other parameter parsing.  This machvec= setting
should probably be moved before start_kernel, or even
arch_get_boot_command_line().  Or we can drop this change.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Tony Luck <tony.luck@intel.com>
---
 arch/avr32/kernel/setup.c   |    2 --
 arch/ia64/kernel/setup.c    |    2 --
 arch/m68k/kernel/setup.c    |    2 --
 arch/mips/kernel/setup.c    |    2 --
 arch/powerpc/kernel/prom.c  |    1 -
 arch/s390/kernel/setup.c    |    2 --
 arch/sh/kernel/setup.c      |    2 --
 arch/sparc/kernel/setup.c   |    3 ---
 arch/sparc64/kernel/setup.c |    3 ---
 arch/x86/kernel/setup.c     |    3 ---
 include/linux/init.h        |    2 --
 init/main.c                 |   21 ++++-----------------
 12 files changed, 4 insertions(+), 41 deletions(-)

diff --git a/arch/avr32/kernel/setup.c b/arch/avr32/kernel/setup.c
--- a/arch/avr32/kernel/setup.c
+++ b/arch/avr32/kernel/setup.c
@@ -579,8 +579,6 @@ void __init setup_arch(void)
 		       ((cpu_hz + 500) / 1000) % 1000);
 	}
 
-	parse_early_param();
-
 	setup_bootmem();
 
 #ifdef CONFIG_VT
diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c
--- a/arch/ia64/kernel/setup.c
+++ b/arch/ia64/kernel/setup.c
@@ -554,8 +554,6 @@ void __init setup_arch(void)
 	 */
 	machvec_init_from_cmdline(boot_command_line);
 #endif
-
-	parse_early_param();
 
 	if (early_console_setup(boot_command_line) == 0)
 		mark_bsp_online();
diff --git a/arch/m68k/kernel/setup.c b/arch/m68k/kernel/setup.c
--- a/arch/m68k/kernel/setup.c
+++ b/arch/m68k/kernel/setup.c
@@ -268,8 +268,6 @@ void __init setup_arch(void)
 	init_mm.end_data = (unsigned long) &_edata;
 	init_mm.brk = (unsigned long) &_end;
 
-	parse_early_param();
-
 #ifdef CONFIG_DUMMY_CONSOLE
 	conswitchp = &dummy_con;
 #endif
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -482,8 +482,6 @@ static void __init arch_mem_init(void)
 	pr_info("Determined physical RAM map:\n");
 	print_memory_map();
 
-	parse_early_param();
-
 	if (usermem) {
 		pr_info("User-defined physical RAM map:\n");
 		print_memory_map();
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -1188,7 +1188,6 @@ void __init early_init_devtree(void *par
 
 	/* Save command line for /proc/cmdline and then parse parameters */
 	strlcpy(boot_command_line, cmd_line, COMMAND_LINE_SIZE);
-	parse_early_param();
 
 	/* Reserve LMB regions used by kernel, initrd, dt, etc... */
 	lmb_reserve(PHYSICAL_START, __pa(klimit) - PHYSICAL_START);
diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -785,8 +785,6 @@ setup_arch(void)
 	else
 		memcpy(&uaccess, &uaccess_std, sizeof(uaccess));
 
-	parse_early_param();
-
 	setup_ipl();
 	setup_memory_end();
 	setup_addressing_mode();
diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
--- a/arch/sh/kernel/setup.c
+++ b/arch/sh/kernel/setup.c
@@ -382,8 +382,6 @@ void __init setup_arch(void)
 	if (!memory_end)
 		memory_end = memory_start + __MEMORY_SIZE;
 
-	parse_early_param();
-
 	sh_mv_setup();
 
 	/*
diff --git a/arch/sparc/kernel/setup.c b/arch/sparc/kernel/setup.c
--- a/arch/sparc/kernel/setup.c
+++ b/arch/sparc/kernel/setup.c
@@ -214,9 +214,6 @@ void __init setup_arch(void)
 	unsigned long highest_paddr;
 
 	sparc_ttable = (struct tt_entry *) &start;
-
-	/* Initialize PROM console. */
-	parse_early_param();
 
 	/* Set sparc_cpu_model */
 	sparc_cpu_model = sun_unknown;
diff --git a/arch/sparc64/kernel/setup.c b/arch/sparc64/kernel/setup.c
--- a/arch/sparc64/kernel/setup.c
+++ b/arch/sparc64/kernel/setup.c
@@ -283,9 +283,6 @@ void __init arch_get_boot_command_line(v
 
 void __init setup_arch(void)
 {
-	/* Initialize PROM console. */
-	parse_early_param();
-
 	boot_flags_init(boot_command_line);
 	register_console(&prom_early_console);
 
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -887,8 +887,6 @@ void __init setup_arch(void)
 	bss_resource.start = virt_to_phys(&__bss_start);
 	bss_resource.end = virt_to_phys(&__bss_stop)-1;
 
-	parse_early_param();
-
 #ifdef CONFIG_X86_64
 	check_efer();
 #endif
@@ -926,7 +924,6 @@ void __init setup_arch(void)
 	probe_roms();
 #endif
 
-	/* after parse_early_param, so could debug it */
 	insert_resource(&iomem_resource, &code_resource);
 	insert_resource(&iomem_resource, &data_resource);
 	insert_resource(&iomem_resource, &bss_resource);
diff --git a/include/linux/init.h b/include/linux/init.h
--- a/include/linux/init.h
+++ b/include/linux/init.h
@@ -245,8 +245,6 @@ struct obs_kernel_param {
 #define early_param(str, fn)					\
 	__setup_param(str, fn, fn, 1)
 
-/* Relies on boot_command_line being set */
-void __init parse_early_param(void);
 #endif /* __ASSEMBLY__ */
 
 /**
diff --git a/init/main.c b/init/main.c
--- a/init/main.c
+++ b/init/main.c
@@ -206,7 +206,7 @@ static int __init obsolete_checksetup(ch
 		int n = strlen(p->str);
 		if (!strncmp(line, p->str, n)) {
 			if (p->early) {
-				/* Already done in parse_early_param?
+				/* Already done in do_early_param?
 				 * (Needs exact match on param part).
 				 * Keep iterating, as we can have early
 				 * params and __setups of same names 8( */
@@ -518,21 +518,6 @@ static int __init do_early_param(char *p
 	return 0;
 }
 
-/* Arch code calls this early on, or if not, just before other parsing. */
-void __init parse_early_param(void)
-{
-	static __initdata int done = 0;
-	static __initdata char tmp_cmdline[COMMAND_LINE_SIZE];
-
-	if (done)
-		return;
-
-	/* All fall through to do_early_param. */
-	strlcpy(tmp_cmdline, boot_command_line, COMMAND_LINE_SIZE);
-	parse_args("early options", tmp_cmdline, NULL, 0, do_early_param, true);
-	done = 1;
-}
-
 /*
  *	Activate the first processor.
  */
@@ -568,6 +553,9 @@ asmlinkage void __init start_kernel(void
 	parse_args("Core params", boot_command_line, __start___core_param,
 		   __stop___core_param - __start___core_param,
 		   unknown_core_ok, true);
+	/* All fall through to do_early_param. */
+	parse_args("early options", boot_command_line, NULL, 0, do_early_param,
+		   true);
 
 	smp_setup_processor_id();
 
@@ -617,7 +605,6 @@ asmlinkage void __init start_kernel(void
 	build_all_zonelists();
 	page_alloc_init();
 	printk(KERN_NOTICE "Kernel command line: %s\n", boot_command_line);
-	parse_early_param();
 	parse_args("Booting kernel", static_command_line, __start___param,
 		   __stop___param - __start___param,
 		   &unknown_bootoption, false);