From: Jan De Luyck <ml_linuxkernel_20080830@kcore.org>
To: linux-kernel@vger.kernel.org
Subject: 2.6.27 - swncq problem with nforce 570 and ST3320620AS?
Date: Tue, 2 Dec 2008 11:13:50 +0100 [thread overview]
Message-ID: <200812021113.50519.ml_linuxkernel_20080830@kcore.org> (raw)
Hello,
I switched not too long ago to 2.6.27-series, and since then I've been getting this now and then at bootup:
This was with 2.6.27.4, upgraded today to 2.6.27.7.
Disk in question is:
ATA device, with non-removable media
Model Number: ST3320620AS
Serial Number: 9QF1QMGA
Firmware Revision: 3.AAE
whocares kernel: ata4: EH in SWNCQ mode,QC:qc_active 0x6 sactive 0x6
whocares kernel: ata4: SWNCQ:qc_active 0x6 defer_bits 0x0 last_issue_tag 0x2
whocares kernel: dhfis 0x6 dmafis 0x2 sdbfis 0x0
whocares kernel: ata4: ATA_REG 0x40 ERR_REG 0x0
whocares kernel: ata4: tag : dhfis dmafis sdbfis sacitve
whocares kernel: ata4: tag 0x1: 1 1 0 1
whocares kernel: ata4: tag 0x2: 1 0 0 1
whocares kernel: ata4.00: exception Emask 0x0 SAct 0x6 SErr 0x1800000 action 0x6 frozen
whocares kernel: ata4: SError: { LinkSeq TrStaTrns }
whocares kernel: ata4.00: cmd 60/3e:08:61:00:00/00:00:00:00:00/40 tag 1 ncq 31744 in
whocares kernel: res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
whocares kernel: ata4.00: status: { DRDY }
whocares kernel: ata4.00: cmd 60/02:10:bf:d6:42/00:00:25:00:00/40 tag 2 ncq 1024 in
whocares kernel: res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
whocares kernel: ata4.00: status: { DRDY }
whocares kernel: ata4: hard resetting link
whocares kernel: ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
whocares kernel: ata4.00: configured for UDMA/133
whocares kernel: ata4: EH complete
whocares kernel: sd 3:0:0:0: [sdd] 625142448 512-byte hardware sectors (320073 MB)
whocares kernel: sd 3:0:0:0: [sdd] Write Protect is off
whocares kernel: sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
whocares kernel: sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
...
whocares kernel: XFS mounting filesystem sdd1
whocares kernel: ata4: EH in SWNCQ mode,QC:qc_active 0xF sactive 0xF
whocares kernel: ata4: SWNCQ:qc_active 0x1 defer_bits 0xE last_issue_tag 0x0
whocares kernel: dhfis 0x1 dmafis 0x1 sdbfis 0x0
whocares kernel: ata4: ATA_REG 0x40 ERR_REG 0x0
whocares kernel: ata4: tag : dhfis dmafis sdbfis sacitve
whocares kernel: ata4: tag 0x0: 1 1 0 1
whocares kernel: ata4.00: exception Emask 0x0 SAct 0xf SErr 0x400000 action 0x6 frozen
whocares kernel: ata4: SError: { Handshk }
whocares kernel: ata4.00: cmd 61/00:00:9f:8d:a2/04:00:12:00:00/40 tag 0 ncq 524288 out
whocares kernel: res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout)
whocares kernel: ata4.00: status: { DRDY }
whocares kernel: ata4.00: cmd 61/00:08:9f:91:a2/04:00:12:00:00/40 tag 1 ncq 524288 out
whocares kernel: res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
whocares kernel: ata4.00: status: { DRDY }
whocares kernel: ata4.00: cmd 61/00:10:9f:95:a2/04:00:12:00:00/40 tag 2 ncq 524288 out
whocares kernel: res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
whocares kernel: ata4.00: status: { DRDY }
whocares kernel: ata4.00: cmd 61/00:18:9f:99:a2/04:00:12:00:00/40 tag 3 ncq 524288 out
whocares kernel: res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
whocares kernel: ata4.00: status: { DRDY }
whocares kernel: ata4: hard resetting link
whocares kernel: ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
whocares kernel: ata4.00: configured for UDMA/133
whocares kernel: ata4: EH complete
whocares kernel: sd 3:0:0:0: [sdd] 625142448 512-byte hardware sectors (320073 MB)
whocares kernel: sd 3:0:0:0: [sdd] Write Protect is off
whocares kernel: sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
whocares kernel: sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
whocares kernel: ata4: EH in SWNCQ mode,QC:qc_active 0xF sactive 0xF
whocares kernel: ata4: SWNCQ:qc_active 0x1 defer_bits 0xE last_issue_tag 0x0
whocares kernel: dhfis 0x1 dmafis 0x1 sdbfis 0x0
whocares kernel: ata4: ATA_REG 0x40 ERR_REG 0x0
whocares kernel: ata4: tag : dhfis dmafis sdbfis sacitve
whocares kernel: ata4: tag 0x0: 1 1 0 1
whocares kernel: ata4.00: exception Emask 0x0 SAct 0xf SErr 0x400000 action 0x6 frozen
whocares kernel: ata4: SError: { Handshk }
whocares kernel: ata4.00: cmd 61/00:00:9f:99:a2/04:00:12:00:00/40 tag 0 ncq 524288 out
whocares kernel: res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout)
whocares kernel: ata4.00: status: { DRDY }
whocares kernel: ata4.00: cmd 61/00:08:9f:95:a2/04:00:12:00:00/40 tag 1 ncq 524288 out
whocares kernel: res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
whocares kernel: ata4.00: status: { DRDY }
whocares kernel: ata4.00: cmd 61/00:10:9f:91:a2/04:00:12:00:00/40 tag 2 ncq 524288 out
whocares kernel: res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
whocares kernel: ata4.00: status: { DRDY }
whocares kernel: ata4.00: cmd 61/00:18:9f:8d:a2/04:00:12:00:00/40 tag 3 ncq 524288 out
whocares kernel: res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
whocares kernel: ata4.00: status: { DRDY }
whocares kernel: ata4: hard resetting link
whocares kernel: ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
whocares kernel: ata4.00: configured for UDMA/133
whocares kernel: ata4: EH complete
whocares kernel: sd 3:0:0:0: [sdd] 625142448 512-byte hardware sectors (320073 MB)
whocares kernel: sd 3:0:0:0: [sdd] Write Protect is off
whocares kernel: sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
whocares kernel: sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
whocares kernel: Ending clean XFS mount for filesystem: sdd1
...
Anyone any idea what might be causing this?
I have several disks of the same type in my PC, with different firmwares though - this is the only
one exhibiting this problem.
Kind regards
Jan
--
Tu bi or not tu bi
FAIL -- Antônimo de bonito: Ele é FAIL
RIVER -- Pior que FAIL: Ele é o RIVER
next reply other threads:[~2008-12-02 11:20 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-12-02 10:13 Jan De Luyck [this message]
2008-12-04 5:45 ` 2.6.27 - swncq problem with nforce 570 and ST3320620AS? Robert Hancock
2008-12-04 6:22 ` Justin P. Mattock
2008-12-07 21:20 ` Rafael J. Wysocki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200812021113.50519.ml_linuxkernel_20080830@kcore.org \
--to=ml_linuxkernel_20080830@kcore.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.