From: Thomas Renninger <trenn@suse.de>
To: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Shaohua Li <shaohua.li@intel.com>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"jbarnes@virtuousgeek.org" <jbarnes@virtuousgeek.org>,
Rafael Wysocki <rwysocki@suse.de>,
"shemminger@linux-foundation.org"
<shemminger@linux-foundation.org>,
"netdev@vger.kernel.org" <netdev@vger.kernel.org>,
"Stable@kernel.org" <Stable@kernel.org>
Subject: Re: [PATCH] PCIe ASPM causes machine (HP Compaq 6735s) to sometimes freeze hard at boot at PCI initialization time
Date: Mon, 8 Dec 2008 16:17:50 +0100 [thread overview]
Message-ID: <200812081617.52047.trenn@suse.de> (raw)
In-Reply-To: <20081208150919.GA1155@srcf.ucam.org>
On Monday 08 December 2008 16:09:19 Matthew Garrett wrote:
> On Mon, Dec 08, 2008 at 04:04:09PM +0100, Thomas Renninger wrote:
> > - pci_read_config_word(pdev, pos + PCI_EXP_LNKCTL, ®16);
> > + parent_reg = pci_read_config_word(pdev, pos + PCI_EXP_LNKCTL, ®16);
>
> I don't think that does what you think it does :)
Hehe, thanks for the quick and detailed review!
This one should be better:
PCIe: ASPM: Break out of endless loop waiting for PCI config bits to switch
Makes a Compaq 6735s boot reliably again which hang in the loop
on some boots.
Signed-off-by: Thomas Renninger <trenn@suse.de>
---
drivers/pci/pcie/aspm.c | 28 +++++++++++++++++++++++++---
1 file changed, 25 insertions(+), 3 deletions(-)
Index: linux-2.6.27/drivers/pci/pcie/aspm.c
===================================================================
--- linux-2.6.27.orig/drivers/pci/pcie/aspm.c
+++ linux-2.6.27/drivers/pci/pcie/aspm.c
@@ -16,6 +16,7 @@
#include <linux/pm.h>
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/jiffies.h>
#include <linux/pci-aspm.h>
#include "../pci.h"
@@ -161,11 +162,12 @@ static void pcie_check_clock_pm(struct p
*/
static void pcie_aspm_configure_common_clock(struct pci_dev *pdev)
{
- int pos, child_pos;
+ int pos, child_pos, i = 0;
u16 reg16 = 0;
struct pci_dev *child_dev;
int same_clock = 1;
-
+ unsigned long start_jiffies = jiffies;
+ u16 child_regs[256], parent_reg;
/*
* all functions of a slot should have the same Slot Clock
* Configuration, so just check one function
@@ -191,16 +193,19 @@ static void pcie_aspm_configure_common_c
child_pos = pci_find_capability(child_dev, PCI_CAP_ID_EXP);
pci_read_config_word(child_dev, child_pos + PCI_EXP_LNKCTL,
®16);
+ child_regs[i] = reg16;
if (same_clock)
reg16 |= PCI_EXP_LNKCTL_CCC;
else
reg16 &= ~PCI_EXP_LNKCTL_CCC;
pci_write_config_word(child_dev, child_pos + PCI_EXP_LNKCTL,
reg16);
+ i++;
}
/* Configure upstream component */
pci_read_config_word(pdev, pos + PCI_EXP_LNKCTL, ®16);
+ parent_reg = reg16;
if (same_clock)
reg16 |= PCI_EXP_LNKCTL_CCC;
else
@@ -212,12 +217,29 @@ static void pcie_aspm_configure_common_c
pci_write_config_word(pdev, pos + PCI_EXP_LNKCTL, reg16);
/* Wait for link training end */
- while (1) {
+ /* break out after waiting for 1 second */
+ while ((jiffies - start_jiffies) < HZ) {
pci_read_config_word(pdev, pos + PCI_EXP_LNKSTA, ®16);
if (!(reg16 & PCI_EXP_LNKSTA_LT))
break;
cpu_relax();
}
+ /* training failed -> recover */
+ if ((jiffies - start_jiffies) >= HZ) {
+ dev_printk (KERN_ERR, &pdev->dev, "ASPM: Could not configure"
+ " common clock\n");
+ i = 0;
+ list_for_each_entry(child_dev, &pdev->subordinate->devices,
+ bus_list) {
+ child_pos = pci_find_capability(child_dev,
+ PCI_CAP_ID_EXP);
+ pci_write_config_word(child_dev,
+ child_pos + PCI_EXP_LNKCTL,
+ child_regs[i]);
+ i++;
+ }
+ pci_write_config_word(pdev, pos + PCI_EXP_LNKCTL, parent_reg);
+ }
}
/*
next prev parent reply other threads:[~2008-12-08 15:18 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-11-28 12:28 PCIe ASPM causes machine (HP Compaq 6735s) to sometimes freeze hard at boot at PCI initialization time Thomas Renninger
2008-12-05 12:41 ` Identified: PCIe ASPM causes machine (HP Compaq 6735s) to sometimes hang in endless loop Thomas Renninger
2008-12-05 13:07 ` [PATCH] PCIe ASPM causes machine (HP Compaq 6735s) to sometimes freeze hard at boot at PCI initialization time Thomas Renninger
2008-12-05 18:21 ` Matthew Garrett
2008-12-08 1:32 ` Shaohua Li
2008-12-08 14:56 ` Thomas Renninger
2008-12-08 15:04 ` Thomas Renninger
2008-12-08 15:09 ` Matthew Garrett
2008-12-08 15:17 ` Thomas Renninger [this message]
2008-12-09 1:19 ` Shaohua Li
2008-12-09 12:05 ` Thomas Renninger
2008-12-09 23:05 ` Jesse Barnes
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200812081617.52047.trenn@suse.de \
--to=trenn@suse.de \
--cc=Stable@kernel.org \
--cc=jbarnes@virtuousgeek.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mjg59@srcf.ucam.org \
--cc=netdev@vger.kernel.org \
--cc=rwysocki@suse.de \
--cc=shaohua.li@intel.com \
--cc=shemminger@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.