From: Henning Rogge <hrogge@googlemail.com>
To: Johannes Berg <johannes@sipsolutions.net>
Cc: Henning Rogge <rogge@fgan.de>,
"Luis R. Rodriguez" <lrodriguez@atheros.com>,
Luis Rodriguez <Luis.Rodriguez@atheros.com>,
Marcel Holtmann <holtmann@linux.intel.com>,
"linux-wireless" <linux-wireless@vger.kernel.org>,
"nbd@openwrt.org" <nbd@openwrt.org>
Subject: Re: [PATCH 1/2] Add signal strength and bandwith to nl80211station info
Date: Wed, 10 Dec 2008 21:58:45 +0100 [thread overview]
Message-ID: <200812102158.56201.hrogge@googlemail.com> (raw)
In-Reply-To: <1228941937.15837.71.camel@johannes.berg>
[-- Attachment #1.1: Type: text/plain, Size: 3233 bytes --]
On Wednesday 10 December 2008 21:45:37 Johannes Berg wrote:
> On Wed, 2008-12-10 at 18:40 +0100, Henning Rogge wrote:
> Can you do what I asked for instead and not include the attribute when
> it has a bogus value?
I agree, that was a stupid thing...
Henning
-------------------------------
diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index 56450b4..cc93e7a 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -431,14 +431,14 @@ enum nl80211_sta_flags {
* when getting information about the bitrate of a station.
*
* @__NL80211_RATE_INFO_INVALID: attribute number 0 is reserved
- * @NL80211_RATE_INFO_LEGACY: bitrate for 802.11abg (u16, 100kbit/s)
+ * @NL80211_RATE_INFO_BITRATE: total bitrate (u16, 100kbit/s)
* @NL80211_RATE_INFO_MCS: mcs index for 802.11n (u8)
* @NL80211_RATE_INFO_40_MHZ_WIDTH: 40 Mhz dualchannel bitrate
* @NL80211_RATE_INFO_SHORT_GI: 400ns guard interval
*/
enum nl80211_rate_info {
__NL80211_RATE_INFO_INVALID,
- NL80211_RATE_INFO_LEGACY,
+ NL80211_RATE_INFO_BITRATE,
NL80211_RATE_INFO_MCS,
NL80211_RATE_INFO_40_MHZ_WIDTH,
NL80211_RATE_INFO_SHORT_GI,
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 3f13928..4797b47 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -1079,12 +1079,46 @@ static int parse_station_flags(struct nlattr *nla, u32
*staflags)
return 0;
}
+static u16 nl80211_calculate_bitrate(struct rate_info *rate)
+{
+ int modulation, streams, bitrate;
+
+ if (!(rate->flags & RATE_INFO_FLAGS_MCS))
+ return rate->legacy;
+
+ /* the formula below does only work for MCS values smaller than 32 */
+ if (rate->mcs >= 32)
+ return 0;
+
+ modulation = rate->mcs & 7;
+ streams = (rate->mcs >> 3) + 1;
+
+ bitrate = (rate->flags & RATE_INFO_FLAGS_40_MHZ_WIDTH) ?
+ 13500000 : 6500000;
+
+ if (modulation < 4)
+ bitrate *= (modulation + 1);
+ else if (modulation == 4)
+ bitrate *= (modulation + 2);
+ else
+ bitrate *= (modulation + 3);
+
+ bitrate *= streams;
+
+ if (rate->flags & RATE_INFO_FLAGS_SHORT_GI)
+ bitrate = (bitrate / 9) * 10;
+
+ /* do NOT round down here */
+ return (bitrate + 50000) / 100000;
+}
+
static int nl80211_send_station(struct sk_buff *msg, u32 pid, u32 seq,
int flags, struct net_device *dev,
u8 *mac_addr, struct station_info *sinfo)
{
void *hdr;
struct nlattr *sinfoattr, *txrate;
+ u16 bitrate;
hdr = nl80211hdr_put(msg, pid, seq, flags, NL80211_CMD_NEW_STATION);
if (!hdr)
@@ -1122,11 +1156,12 @@ static int nl80211_send_station(struct sk_buff *msg,
u32 pid, u32 seq,
if (!txrate)
goto nla_put_failure;
+ /* nl80211_calculate_bitrate will return 0 for mcs >= 32 */
+ bitrate = nl80211_calculate_bitrate(&sinfo->txrate);
+ if (bitrate > 0)
+ NLA_PUT_U16(msg, NL80211_RATE_INFO_BITRATE, bitrate);
- if (!(sinfo->txrate.flags & RATE_INFO_FLAGS_MCS))
- NLA_PUT_U16(msg, NL80211_RATE_INFO_LEGACY,
- sinfo->txrate.legacy);
- else
+ if (sinfo->txrate.flags & RATE_INFO_FLAGS_MCS)
NLA_PUT_U8(msg, NL80211_RATE_INFO_MCS,
sinfo->txrate.mcs);
if (sinfo->txrate.flags & RATE_INFO_FLAGS_40_MHZ_WIDTH)
[-- Attachment #1.2: nl80211ext_v11_2.patch --]
[-- Type: text/x-patch, Size: 2927 bytes --]
diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index 56450b4..cc93e7a 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -431,14 +431,14 @@ enum nl80211_sta_flags {
* when getting information about the bitrate of a station.
*
* @__NL80211_RATE_INFO_INVALID: attribute number 0 is reserved
- * @NL80211_RATE_INFO_LEGACY: bitrate for 802.11abg (u16, 100kbit/s)
+ * @NL80211_RATE_INFO_BITRATE: total bitrate (u16, 100kbit/s)
* @NL80211_RATE_INFO_MCS: mcs index for 802.11n (u8)
* @NL80211_RATE_INFO_40_MHZ_WIDTH: 40 Mhz dualchannel bitrate
* @NL80211_RATE_INFO_SHORT_GI: 400ns guard interval
*/
enum nl80211_rate_info {
__NL80211_RATE_INFO_INVALID,
- NL80211_RATE_INFO_LEGACY,
+ NL80211_RATE_INFO_BITRATE,
NL80211_RATE_INFO_MCS,
NL80211_RATE_INFO_40_MHZ_WIDTH,
NL80211_RATE_INFO_SHORT_GI,
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 3f13928..4797b47 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -1079,12 +1079,46 @@ static int parse_station_flags(struct nlattr *nla, u32 *staflags)
return 0;
}
+static u16 nl80211_calculate_bitrate(struct rate_info *rate)
+{
+ int modulation, streams, bitrate;
+
+ if (!(rate->flags & RATE_INFO_FLAGS_MCS))
+ return rate->legacy;
+
+ /* the formula below does only work for MCS values smaller than 32 */
+ if (rate->mcs >= 32)
+ return 0;
+
+ modulation = rate->mcs & 7;
+ streams = (rate->mcs >> 3) + 1;
+
+ bitrate = (rate->flags & RATE_INFO_FLAGS_40_MHZ_WIDTH) ?
+ 13500000 : 6500000;
+
+ if (modulation < 4)
+ bitrate *= (modulation + 1);
+ else if (modulation == 4)
+ bitrate *= (modulation + 2);
+ else
+ bitrate *= (modulation + 3);
+
+ bitrate *= streams;
+
+ if (rate->flags & RATE_INFO_FLAGS_SHORT_GI)
+ bitrate = (bitrate / 9) * 10;
+
+ /* do NOT round down here */
+ return (bitrate + 50000) / 100000;
+}
+
static int nl80211_send_station(struct sk_buff *msg, u32 pid, u32 seq,
int flags, struct net_device *dev,
u8 *mac_addr, struct station_info *sinfo)
{
void *hdr;
struct nlattr *sinfoattr, *txrate;
+ u16 bitrate;
hdr = nl80211hdr_put(msg, pid, seq, flags, NL80211_CMD_NEW_STATION);
if (!hdr)
@@ -1122,11 +1156,12 @@ static int nl80211_send_station(struct sk_buff *msg, u32 pid, u32 seq,
if (!txrate)
goto nla_put_failure;
+ /* nl80211_calculate_bitrate will return 0 for mcs >= 32 */
+ bitrate = nl80211_calculate_bitrate(&sinfo->txrate);
+ if (bitrate > 0)
+ NLA_PUT_U16(msg, NL80211_RATE_INFO_BITRATE, bitrate);
- if (!(sinfo->txrate.flags & RATE_INFO_FLAGS_MCS))
- NLA_PUT_U16(msg, NL80211_RATE_INFO_LEGACY,
- sinfo->txrate.legacy);
- else
+ if (sinfo->txrate.flags & RATE_INFO_FLAGS_MCS)
NLA_PUT_U8(msg, NL80211_RATE_INFO_MCS,
sinfo->txrate.mcs);
if (sinfo->txrate.flags & RATE_INFO_FLAGS_40_MHZ_WIDTH)
[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 197 bytes --]
next prev parent reply other threads:[~2008-12-10 20:59 UTC|newest]
Thread overview: 66+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-11-25 20:31 RFC Patch: Add signal strength to nl80211station info Henning Rogge
2008-11-25 20:47 ` Johannes Berg
2008-11-25 21:01 ` Henning Rogge
2008-11-26 5:21 ` Marcel Holtmann
2008-11-26 8:32 ` Johannes Berg
2008-11-26 16:17 ` Henning Rogge
2008-11-29 10:50 ` RFC Patch v2: " Henning Rogge
2008-12-01 11:17 ` Johannes Berg
2008-12-01 13:22 ` Henning Rogge
2008-12-01 17:39 ` Luis R. Rodriguez
2008-12-01 17:45 ` Luis R. Rodriguez
2008-12-01 17:53 ` Henning Rogge
2008-12-02 13:25 ` Henning Rogge
2008-12-02 20:29 ` Luis R. Rodriguez
2008-12-02 20:46 ` Henning Rogge
2008-12-03 1:44 ` Luis R. Rodriguez
2008-12-03 10:31 ` Henning Rogge
2008-12-04 8:47 ` Johannes Berg
2008-12-04 9:48 ` Henning Rogge
2008-12-04 13:02 ` Johannes Berg
2008-12-04 20:26 ` Johannes Berg
2008-12-04 21:12 ` Luis R. Rodriguez
2008-12-04 21:20 ` Johannes Berg
2008-12-05 8:34 ` Henning Rogge
2008-12-05 9:45 ` Johannes Berg
2008-12-05 9:51 ` Henning Rogge
2008-12-05 9:54 ` Johannes Berg
2008-12-05 23:26 ` Henning Rogge
2008-12-06 9:15 ` Johannes Berg
2008-12-06 11:12 ` Henning Rogge
2008-12-06 14:10 ` Henning Rogge
2008-12-06 14:43 ` Henning Rogge
2008-12-06 14:51 ` Johannes Berg
2008-12-06 15:03 ` Henning Rogge
2008-12-06 15:46 ` Henning Rogge
2008-12-06 15:59 ` Johannes Berg
2008-12-06 16:08 ` Henning Rogge
2008-12-06 20:46 ` Luis R. Rodriguez
2008-12-07 17:32 ` Henning Rogge
2008-12-07 17:39 ` Johannes Berg
2008-12-07 18:17 ` [PATCH 1/2] Add signal strength and bandwith " Henning Rogge
2008-12-08 19:43 ` Johannes Berg
2008-12-09 19:50 ` Henning Rogge
2008-12-09 21:16 ` Johannes Berg
2008-12-10 6:53 ` Henning Rogge
2008-12-10 9:05 ` Johannes Berg
2008-12-10 17:40 ` Henning Rogge
2008-12-10 20:45 ` Johannes Berg
2008-12-10 20:58 ` Henning Rogge [this message]
2008-12-10 21:01 ` Johannes Berg
2008-12-11 17:07 ` [Patch] nl80211: " Henning Rogge
2008-12-11 17:24 ` Johannes Berg
2008-12-11 18:02 ` Henning Rogge
2008-12-11 18:14 ` Johannes Berg
2008-12-11 18:22 ` Henning Rogge
2008-12-11 18:28 ` Johannes Berg
2008-12-11 20:10 ` Henning Rogge
2008-12-11 20:24 ` Johannes Berg
2008-12-11 20:12 ` Henning Rogge
2008-12-11 20:23 ` Johannes Berg
2008-12-09 19:54 ` [Patch 1/2 v2] " Henning Rogge
2008-12-09 19:58 ` [Patch 2/2 " Henning Rogge
2008-12-09 21:19 ` Johannes Berg
2008-12-07 18:19 ` [PATCH 2/2] " Henning Rogge
2008-12-07 18:20 ` [PATCH 0/2] " Henning Rogge
2008-12-06 15:48 ` RFC Patch v2: Add signal strength " Johannes Berg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200812102158.56201.hrogge@googlemail.com \
--to=hrogge@googlemail.com \
--cc=Luis.Rodriguez@atheros.com \
--cc=holtmann@linux.intel.com \
--cc=johannes@sipsolutions.net \
--cc=linux-wireless@vger.kernel.org \
--cc=lrodriguez@atheros.com \
--cc=nbd@openwrt.org \
--cc=rogge@fgan.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.