From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org, jeff@garzik.org,
Joerg Roedel <joerg.roedel@amd.com>,
Jesse Brandeburg <jesse.brandeburg@intel.com>,
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Subject: [NET-NEXT PATCH] ixgbe: fix dma mapping unbalance
Date: Fri, 12 Dec 2008 01:51:05 -0800 [thread overview]
Message-ID: <20081212095104.4380.49487.stgit@lost.foo-projects.org> (raw)
From: Jesse Brandeburg <jesse.brandeburg@intel.com>
This issue was initially reported by Joerg Roedel <joerg.roedel@amd.com>
It appears that ixgbe has had a long standing bug where it was unmapping a different size than it had mapped.
ixgbe 0000:02:00.0: PCI-DMA: device driver frees DMA memory with different sizes than it mapped.
ixgbe 0000:02:00.0: PCI-DMA: device driver frees DMA memory with different size [device address=0x0000000003fed812] [map size=258 bytes] [unmap size=256 bytes]
Pid: 6178, comm: rmmod Not tainted 2.6.28-rc5 #4 Call Trace:
[<ffffffff8022a2ae>] iommu_queue_inv_iommu_pages+0x5e/0x70
[<ffffffff80225956>] check_unmap+0x1c6/0x240 [<ffffffff80225ff5>] debug_unmap_single+0xb5/0x110 [<ffffffffa0213997>] ixgbe_clean_rx_ring+0x147/0x220 [<ffffffffa0214d7d>] ixgbe_down+0x2fd/0x3d0 [ixgbe] [<ffffffffa02150b3>] ixgbe_close+0x13/0xc0 [ixgbe] [<ffffffff80431326>] dev_close+0x56/0xa0 [<ffffffff804313b3>] rollback_registered+0x43/0x220 [<ffffffff804315a5>] unregister_netdevice+0x15/0x60 [<ffffffff80431601>] unregister_netdev+0x11/0x20 [<ffffffffa021aef8>] ixgbe_remove+0x48/0x16e [ixgbe] [<ffffffff80386ffc>] pci_device_remove+0x2c/0x60 [<ffffffff803ef929>] __device_release_driver+0x99/0x100
[<ffffffff803efa48>] driver_detach+0xb8/0xc0 [<ffffffff803eea6e>] bus_remove_driver+0x8e/0xd0 [<ffffffff80387374>] pci_unregister_driver+0x34/0x90 [<ffffffff8026c6c7>] sys_delete_module+0x1c7/0x2a0 [<ffffffff802a9ce9>] do_munmap+0x349/0x390 [<ffffffff80374481>] __up_write+0x21/0x150 [<ffffffff8020c30b>] system_call_fastpath+0x16/0x1b
CC: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
drivers/net/ixgbe/ixgbe_main.c | 12 +++++++-----
1 files changed, 7 insertions(+), 5 deletions(-)
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index d6f666a..92b35cf 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -479,7 +479,6 @@ static void ixgbe_alloc_rx_buffers(struct ixgbe_adapter *adapter,
union ixgbe_adv_rx_desc *rx_desc;
struct ixgbe_rx_buffer *bi;
unsigned int i;
- unsigned int bufsz = rx_ring->rx_buf_len + NET_IP_ALIGN;
i = rx_ring->next_to_use;
bi = &rx_ring->rx_buffer_info[i];
@@ -508,8 +507,10 @@ static void ixgbe_alloc_rx_buffers(struct ixgbe_adapter *adapter,
}
if (!bi->skb) {
- struct sk_buff *skb = netdev_alloc_skb(adapter->netdev,
- bufsz);
+ struct sk_buff *skb;
+ skb = netdev_alloc_skb(adapter->netdev,
+ (rx_ring->rx_buf_len +
+ NET_IP_ALIGN));
if (!skb) {
adapter->alloc_rx_buff_failed++;
@@ -524,7 +525,8 @@ static void ixgbe_alloc_rx_buffers(struct ixgbe_adapter *adapter,
skb_reserve(skb, NET_IP_ALIGN);
bi->skb = skb;
- bi->dma = pci_map_single(pdev, skb->data, bufsz,
+ bi->dma = pci_map_single(pdev, skb->data,
+ rx_ring->rx_buf_len,
PCI_DMA_FROMDEVICE);
}
/* Refresh the desc even if buffer_addrs didn't change because
@@ -615,7 +617,7 @@ static bool ixgbe_clean_rx_irq(struct ixgbe_adapter *adapter,
if (len && !skb_shinfo(skb)->nr_frags) {
pci_unmap_single(pdev, rx_buffer_info->dma,
- rx_ring->rx_buf_len + NET_IP_ALIGN,
+ rx_ring->rx_buf_len,
PCI_DMA_FROMDEVICE);
skb_put(skb, len);
}
next reply other threads:[~2008-12-12 9:51 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-12-12 9:51 Jeff Kirsher [this message]
2008-12-12 11:31 ` [NET-NEXT PATCH] ixgbe: fix dma mapping unbalance Joerg Roedel
2008-12-15 9:01 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20081212095104.4380.49487.stgit@lost.foo-projects.org \
--to=jeffrey.t.kirsher@intel.com \
--cc=davem@davemloft.net \
--cc=jeff@garzik.org \
--cc=jesse.brandeburg@intel.com \
--cc=joerg.roedel@amd.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.