From: Balaji Rao <balajirrao@openmoko.org>
To: linux-kernel@vger.kernel.org
Cc: Balaji Rao <balajirrao@openmoko.org>,
Andy Green <andy@openmoko.com>,
Samuel Ortiz <sameo@openedhand.com>
Subject: [PATCH 2/7] mfd: PCF50633 adc driver
Date: Sun, 14 Dec 2008 16:32:29 +0530 [thread overview]
Message-ID: <20081214110229.3307.8141.stgit@cff.thadambail> (raw)
In-Reply-To: <20081214110152.3307.50843.stgit@cff.thadambail>
This patch adds basic support for the PCF50633 ADC. The subtractive mode
is not supported yet.
Since we don't have adc subsystem, it currently lives in drivers/mfd.
Signed-off-by: Balaji Rao <balajirrao@openmoko.org>
Cc: Andy Green <andy@openmoko.com>
Cc: Samuel Ortiz <sameo@openedhand.com>
---
drivers/mfd/Kconfig | 7 +
drivers/mfd/Makefile | 1
drivers/mfd/pcf50633-adc.c | 263 ++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 271 insertions(+), 0 deletions(-)
create mode 100644 drivers/mfd/pcf50633-adc.c
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index fb1f0f7..02e3d73 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -162,6 +162,13 @@ config MFD_PCF50633
facilities, and registers devices for the various functions
so that function-specific drivers can bind to them.
+config PCF50633_ADC
+ tristate "Support for NXP PCF50633 ADC"
+ depends on MFD_PCF50633
+ help
+ Say yes here if you want to include support for ADC in the
+ NXP PCF50633 chip.
+
endmenu
menu "Multimedia Capabilities Port drivers"
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 6a4add8..7a12b09 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -34,3 +34,4 @@ obj-$(CONFIG_UCB1400_CORE) += ucb1400_core.o
obj-$(CONFIG_PMIC_DA903X) += da903x.o
obj-$(CONFIG_MFD_PCF50633) += pcf50633-core.o
+obj-$(CONFIG_PCF50633_ADC) += pcf50633-adc.o
diff --git a/drivers/mfd/pcf50633-adc.c b/drivers/mfd/pcf50633-adc.c
new file mode 100644
index 0000000..80e40c6
--- /dev/null
+++ b/drivers/mfd/pcf50633-adc.c
@@ -0,0 +1,263 @@
+/* NXP PCF50633 ADC Driver
+ *
+ * (C) 2006-2008 by Openmoko, Inc.
+ * Author: Balaji Rao <balajirrao@openmoko.org>
+ * All rights reserved.
+ *
+ * Broken down from monstrous PCF50633 driver mainly by
+ * Harald Welte, Andy Green and Werner Almesberger
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * NOTE: This driver does not yet support subtractive ADC mode, which means
+ * you can do only one measurement per read request.
+ */
+
+#include <linux/mfd/pcf50633/core.h>
+#include <linux/mfd/pcf50633/adc.h>
+
+struct pcf50633_adc_request {
+ int mux;
+ int avg;
+ int result;
+ void (*callback)(struct pcf50633 *, void *, int);
+ void *callback_param;
+
+ /* Used in case of sync requests */
+ struct completion completion;
+
+};
+
+static void adc_read_setup(struct pcf50633 *pcf,
+ int channel, int avg)
+{
+ channel &= PCF50633_ADCC1_ADCMUX_MASK;
+
+ /* kill ratiometric, but enable ACCSW biasing */
+ pcf50633_reg_write(pcf, PCF50633_REG_ADCC2, 0x00);
+ pcf50633_reg_write(pcf, PCF50633_REG_ADCC3, 0x01);
+
+ /* start ADC conversion on selected channel */
+ pcf50633_reg_write(pcf, PCF50633_REG_ADCC1, channel | avg |
+ PCF50633_ADCC1_ADCSTART | PCF50633_ADCC1_RES_10BIT);
+
+}
+
+static void trigger_next_adc_job_if_any(struct pcf50633 *pcf)
+{
+ int head, tail;
+
+ mutex_lock(&pcf->adc.queue_mutex);
+
+ head = pcf->adc.queue_head;
+ tail = pcf->adc.queue_tail;
+
+ if (!pcf->adc.queue[head])
+ goto out;
+
+ adc_read_setup(pcf, pcf->adc.queue[head]->mux,
+ pcf->adc.queue[head]->avg);
+out:
+ mutex_unlock(&pcf->adc.queue_mutex);
+}
+
+static int
+adc_enqueue_request(struct pcf50633 *pcf, struct pcf50633_adc_request *req)
+{
+ int head, tail;
+
+ mutex_lock(&pcf->adc.queue_mutex);
+
+ head = pcf->adc.queue_head;
+ tail = pcf->adc.queue_tail;
+
+ if (pcf->adc.queue[tail]) {
+ mutex_unlock(&pcf->adc.queue_mutex);
+ return -EBUSY;
+ }
+
+ pcf->adc.queue[tail] = req;
+ pcf->adc.queue_tail =
+ (tail + 1) & (PCF50633_MAX_ADC_FIFO_DEPTH - 1);
+
+ mutex_unlock(&pcf->adc.queue_mutex);
+
+ trigger_next_adc_job_if_any(pcf);
+
+ return 0;
+}
+
+static void
+pcf50633_adc_sync_read_callback(struct pcf50633 *pcf, void *param, int result)
+{
+ struct pcf50633_adc_request *req;
+
+ /*We know here that the passed param is an adc_request object */
+ req = param;
+
+ req->result = result;
+ complete(&req->completion);
+}
+
+int pcf50633_adc_sync_read(struct pcf50633 *pcf, int mux, int avg)
+{
+
+ struct pcf50633_adc_request *req;
+
+ /* req is freed when the result is ready, in interrupt handler */
+ req = kzalloc(sizeof(*req), GFP_KERNEL);
+ if (!req)
+ return -ENOMEM;
+
+ req->mux = mux;
+ req->avg = avg;
+ req->callback = pcf50633_adc_sync_read_callback;
+ req->callback_param = req;
+
+ init_completion(&req->completion);
+ adc_enqueue_request(pcf, req);
+ wait_for_completion(&req->completion);
+
+ return req->result;
+}
+EXPORT_SYMBOL_GPL(pcf50633_adc_sync_read);
+
+int pcf50633_adc_async_read(struct pcf50633 *pcf, int mux, int avg,
+ void (*callback)(struct pcf50633 *, void *, int),
+ void *callback_param)
+{
+ struct pcf50633_adc_request *req;
+
+ /* req is freed when the result is ready, in interrupt handler */
+ req = kmalloc(sizeof(*req), GFP_KERNEL);
+ if (!req)
+ return -ENOMEM;
+
+ req->mux = mux;
+ req->avg = avg;
+ req->callback = callback;
+ req->callback_param = callback_param;
+
+ adc_enqueue_request(pcf, req);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(pcf50633_adc_async_read);
+
+static int adc_result(struct pcf50633 *pcf)
+{
+ u8 adcs1, adcs3;
+ u16 result;
+
+ adcs1 = pcf50633_reg_read(pcf, PCF50633_REG_ADCS1);
+ adcs3 = pcf50633_reg_read(pcf, PCF50633_REG_ADCS3);
+ result = (adcs1 << 2) | (adcs3 & PCF50633_ADCS3_ADCDAT1L_MASK);
+
+ dev_dbg(pcf->dev, "adc result = %d\n", result);
+
+ return result;
+}
+
+static void pcf50633_adc_irq(struct pcf50633 *pcf, int irq, void *unused)
+{
+ struct pcf50633_adc_request *req;
+ int head;
+
+ mutex_lock(&pcf->adc.queue_mutex);
+ head = pcf->adc.queue_head;
+
+ req = pcf->adc.queue[head];
+ if (!req) {
+ dev_err(pcf->dev, "pcf50633-adc irq: ADC queue empty\n");
+ mutex_unlock(&pcf->adc.queue_mutex);
+ return;
+ }
+ pcf->adc.queue[head] = NULL;
+ pcf->adc.queue_head = (head + 1) &
+ (PCF50633_MAX_ADC_FIFO_DEPTH - 1);
+
+ mutex_unlock(&pcf->adc.queue_mutex);
+ req->callback(pcf, req->callback_param, adc_result(pcf));
+
+ kfree(req);
+
+ trigger_next_adc_job_if_any(pcf);
+}
+
+int __init pcf50633_adc_probe(struct platform_device *pdev)
+{
+ struct pcf50633 *pcf;
+
+ pcf = platform_get_drvdata(pdev);
+
+ /* Set up IRQ handlers */
+ pcf->irq_handler[PCF50633_IRQ_ADCRDY].handler = pcf50633_adc_irq;
+
+ mutex_init(&pcf->adc.queue_mutex);
+
+ return 0;
+}
+
+static int __devexit pcf50633_adc_remove(struct platform_device *pdev)
+{
+ struct pcf50633 *pcf;
+ int i, head;
+
+ pcf = platform_get_drvdata(pdev);
+ pcf->irq_handler[PCF50633_IRQ_ADCRDY].handler = NULL;
+
+ mutex_lock(&pcf->adc.queue_mutex);
+
+ head = pcf->adc.queue_head;
+
+ if (pcf->adc.queue[head])
+ dev_err(pcf->dev, "adc driver removed with request pending\n");
+
+ for (i = 0; i < PCF50633_MAX_ADC_FIFO_DEPTH; i++)
+ kfree(pcf->adc.queue[i]);
+
+ mutex_unlock(&pcf->adc.queue_mutex);
+
+ return 0;
+}
+
+struct platform_driver pcf50633_adc_driver = {
+ .driver = {
+ .name = "pcf50633-adc",
+ },
+ .probe = pcf50633_adc_probe,
+ .remove = __devexit_p(pcf50633_adc_remove),
+};
+
+static int __init pcf50633_adc_init(void)
+{
+ return platform_driver_register(&pcf50633_adc_driver);
+}
+module_init(pcf50633_adc_init);
+
+static void __exit pcf50633_adc_exit(void)
+{
+ platform_driver_unregister(&pcf50633_adc_driver);
+}
+module_exit(pcf50633_adc_exit);
+
+MODULE_AUTHOR("Balaji Rao <balajirrao@openmoko.org>");
+MODULE_DESCRIPTION("PCF50633 adc driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:pcf50633-adc");
+
next prev parent reply other threads:[~2008-12-14 11:36 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-12-14 11:01 [PATCH 0/7] PCF50633 support Balaji Rao
2008-12-14 11:02 ` [PATCH 1/7] mfd: PCF50633 core driver Balaji Rao
2008-12-14 11:02 ` Balaji Rao [this message]
2008-12-14 11:02 ` [PATCH 3/7] mfd: PCF50633 gpio support Balaji Rao
2008-12-14 11:03 ` [PATCH 4/7] rtc: PCF50633 rtc driver Balaji Rao
2008-12-14 19:29 ` Alessandro Zummo
2008-12-14 22:04 ` Balaji Rao
2008-12-14 22:21 ` [rtc-linux] " Alessandro Zummo
2008-12-14 23:29 ` Balaji Rao
2008-12-14 23:39 ` Alessandro Zummo
2008-12-14 11:03 ` [PATCH 5/7] power_supply: PCF50633 battery charger driver Balaji Rao
2008-12-14 22:10 ` Balaji Rao
2008-12-15 22:38 ` Anton Vorontsov
2008-12-16 15:24 ` Balaji Rao
2008-12-14 11:03 ` [PATCH 6/7] input: PCF50633 input driver Balaji Rao
2008-12-15 7:35 ` Dmitry Torokhov
2008-12-16 15:18 ` Balaji Rao
2008-12-14 11:04 ` [PATCH 7/7] regulator: PCF50633 pmic driver Balaji Rao
2008-12-15 11:35 ` Mark Brown
2008-12-15 14:04 ` Balaji Rao
2008-12-16 10:27 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20081214110229.3307.8141.stgit@cff.thadambail \
--to=balajirrao@openmoko.org \
--cc=andy@openmoko.com \
--cc=linux-kernel@vger.kernel.org \
--cc=sameo@openedhand.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.