From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jurij Smakov Date: Sun, 14 Dec 2008 11:19:01 +0000 Subject: Re: [PATCH] Adding additional PCI ID for XVR-500 fb driver Message-Id: <20081214111901.GA4906@droopy.oc.cox.net> List-Id: References: <20081201210534.GA5457@droopy.oc.cox.net> In-Reply-To: <20081201210534.GA5457@droopy.oc.cox.net> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: sparclinux@vger.kernel.org On Mon, Dec 01, 2008 at 09:05:34PM +0000, Jurij Smakov wrote: > Hi, > > My SunBlade 1000 has the following graphics chip: > > 0000:00:01.0 VGA compatible controller: Intergraph Corporation Sun Expert3D-Lite Graphics Accelerator > > with PCI ID 1091:07a0 (vendor ID is Intergraph Corporation). I've > noticed that XVR-500 framebuffer driver (drivers/video/sunxvr500.c) > supports the framebuffer device 3d3d:07a0, which only has the same > device ID but a different vendor (3D Labs). Given that 3D Labs bought > up Intergraph Corporation at some point, it's probably the same chip, > so I tried adding 1091:07a0 to the list of supported PCI IDs for > sunxvr500.c and it worked without problems, the console now is much > nicer than the default PROM monochrome one. Please consider applying > the included patch, which adds this card to the list of supported > devices for XVR-500 driver. > > Signed-off-by: Jurij Smakov > Tested-by: Jurij Smakov Ping. Dave, can you please either apply it or tell me whether there is something wrong with this patch? Thanks. -- Jurij Smakov jurij@wooyd.org Key: http://www.wooyd.org/pgpkey/ KeyID: C99E03CC