From: Anton Vorontsov <avorontsov@ru.mvista.com>
To: Paul Mackerras <paulus@samba.org>
Cc: Milton Miller <miltonm@bga.com>, linuxppc-dev@ozlabs.org
Subject: [PATCH 3/3] powerpc: Remove default kexec/crash_kernel ops assignments
Date: Tue, 16 Dec 2008 19:23:08 +0300 [thread overview]
Message-ID: <20081216162308.GC21749@oksana.dev.rtsoft.ru> (raw)
In-Reply-To: <20081216162217.GA3885@oksana.dev.rtsoft.ru>
Default ops are implicit now.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
---
arch/powerpc/platforms/cell/celleb_setup.c | 9 ---------
arch/powerpc/platforms/cell/setup.c | 6 ------
arch/powerpc/platforms/embedded6xx/c2k.c | 6 ------
arch/powerpc/platforms/embedded6xx/prpmc2800.c | 6 ------
arch/powerpc/platforms/maple/setup.c | 6 ------
arch/powerpc/platforms/powermac/setup.c | 6 ------
arch/powerpc/platforms/ps3/setup.c | 4 ----
7 files changed, 0 insertions(+), 43 deletions(-)
diff --git a/arch/powerpc/platforms/cell/celleb_setup.c b/arch/powerpc/platforms/cell/celleb_setup.c
index b11cb30..07c234f 100644
--- a/arch/powerpc/platforms/cell/celleb_setup.c
+++ b/arch/powerpc/platforms/cell/celleb_setup.c
@@ -45,7 +45,6 @@
#include <asm/mmu.h>
#include <asm/processor.h>
#include <asm/io.h>
-#include <asm/kexec.h>
#include <asm/prom.h>
#include <asm/machdep.h>
#include <asm/cputable.h>
@@ -226,9 +225,6 @@ define_machine(celleb_beat) {
.pci_setup_phb = celleb_setup_phb,
#ifdef CONFIG_KEXEC
.kexec_cpu_down = beat_kexec_cpu_down,
- .machine_kexec = default_machine_kexec,
- .machine_kexec_prepare = default_machine_kexec_prepare,
- .machine_crash_shutdown = default_machine_crash_shutdown,
#endif
};
@@ -248,9 +244,4 @@ define_machine(celleb_native) {
.pci_probe_mode = celleb_pci_probe_mode,
.pci_setup_phb = celleb_setup_phb,
.init_IRQ = celleb_init_IRQ_native,
-#ifdef CONFIG_KEXEC
- .machine_kexec = default_machine_kexec,
- .machine_kexec_prepare = default_machine_kexec_prepare,
- .machine_crash_shutdown = default_machine_crash_shutdown,
-#endif
};
diff --git a/arch/powerpc/platforms/cell/setup.c b/arch/powerpc/platforms/cell/setup.c
index ab721b5..5930536 100644
--- a/arch/powerpc/platforms/cell/setup.c
+++ b/arch/powerpc/platforms/cell/setup.c
@@ -35,7 +35,6 @@
#include <asm/mmu.h>
#include <asm/processor.h>
#include <asm/io.h>
-#include <asm/kexec.h>
#include <asm/pgtable.h>
#include <asm/prom.h>
#include <asm/rtas.h>
@@ -289,9 +288,4 @@ define_machine(cell) {
.progress = cell_progress,
.init_IRQ = cell_init_irq,
.pci_setup_phb = cell_setup_phb,
-#ifdef CONFIG_KEXEC
- .machine_kexec = default_machine_kexec,
- .machine_kexec_prepare = default_machine_kexec_prepare,
- .machine_crash_shutdown = default_machine_crash_shutdown,
-#endif
};
diff --git a/arch/powerpc/platforms/embedded6xx/c2k.c b/arch/powerpc/platforms/embedded6xx/c2k.c
index 32ba0fa..8cab573 100644
--- a/arch/powerpc/platforms/embedded6xx/c2k.c
+++ b/arch/powerpc/platforms/embedded6xx/c2k.c
@@ -20,7 +20,6 @@
#include <linux/seq_file.h>
#include <linux/time.h>
#include <linux/of.h>
-#include <linux/kexec.h>
#include <asm/machdep.h>
#include <asm/prom.h>
@@ -147,9 +146,4 @@ define_machine(c2k) {
.get_irq = mv64x60_get_irq,
.restart = c2k_restart,
.calibrate_decr = generic_calibrate_decr,
-#ifdef CONFIG_KEXEC
- .machine_kexec = default_machine_kexec,
- .machine_kexec_prepare = default_machine_kexec_prepare,
- .machine_crash_shutdown = default_machine_crash_shutdown,
-#endif
};
diff --git a/arch/powerpc/platforms/embedded6xx/prpmc2800.c b/arch/powerpc/platforms/embedded6xx/prpmc2800.c
index 4c485e9..670035f 100644
--- a/arch/powerpc/platforms/embedded6xx/prpmc2800.c
+++ b/arch/powerpc/platforms/embedded6xx/prpmc2800.c
@@ -19,7 +19,6 @@
#include <asm/prom.h>
#include <asm/system.h>
#include <asm/time.h>
-#include <asm/kexec.h>
#include <mm/mmu_decl.h>
@@ -155,9 +154,4 @@ define_machine(prpmc2800){
.get_irq = mv64x60_get_irq,
.restart = prpmc2800_restart,
.calibrate_decr = generic_calibrate_decr,
-#ifdef CONFIG_KEXEC
- .machine_kexec = default_machine_kexec,
- .machine_kexec_prepare = default_machine_kexec_prepare,
- .machine_crash_shutdown = default_machine_crash_shutdown,
-#endif
};
diff --git a/arch/powerpc/platforms/maple/setup.c b/arch/powerpc/platforms/maple/setup.c
index d4c61c3..bfd60e4 100644
--- a/arch/powerpc/platforms/maple/setup.c
+++ b/arch/powerpc/platforms/maple/setup.c
@@ -50,7 +50,6 @@
#include <asm/system.h>
#include <asm/pgtable.h>
#include <asm/io.h>
-#include <asm/kexec.h>
#include <asm/pci-bridge.h>
#include <asm/iommu.h>
#include <asm/machdep.h>
@@ -335,9 +334,4 @@ define_machine(maple) {
.calibrate_decr = generic_calibrate_decr,
.progress = maple_progress,
.power_save = power4_idle,
-#ifdef CONFIG_KEXEC
- .machine_kexec = default_machine_kexec,
- .machine_kexec_prepare = default_machine_kexec_prepare,
- .machine_crash_shutdown = default_machine_crash_shutdown,
-#endif
};
diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c
index 1293772..9b78f53 100644
--- a/arch/powerpc/platforms/powermac/setup.c
+++ b/arch/powerpc/platforms/powermac/setup.c
@@ -60,7 +60,6 @@
#include <asm/system.h>
#include <asm/pgtable.h>
#include <asm/io.h>
-#include <asm/kexec.h>
#include <asm/pci-bridge.h>
#include <asm/ohare.h>
#include <asm/mediabay.h>
@@ -738,11 +737,6 @@ define_machine(powermac) {
.pci_probe_mode = pmac_pci_probe_mode,
.power_save = power4_idle,
.enable_pmcs = power4_enable_pmcs,
-#ifdef CONFIG_KEXEC
- .machine_kexec = default_machine_kexec,
- .machine_kexec_prepare = default_machine_kexec_prepare,
- .machine_crash_shutdown = default_machine_crash_shutdown,
-#endif
#endif /* CONFIG_PPC64 */
#ifdef CONFIG_PPC32
.pcibios_enable_device_hook = pmac_pci_enable_device_hook,
diff --git a/arch/powerpc/platforms/ps3/setup.c b/arch/powerpc/platforms/ps3/setup.c
index bfc33fb..35f3e85 100644
--- a/arch/powerpc/platforms/ps3/setup.c
+++ b/arch/powerpc/platforms/ps3/setup.c
@@ -23,7 +23,6 @@
#include <linux/fs.h>
#include <linux/root_dev.h>
#include <linux/console.h>
-#include <linux/kexec.h>
#include <linux/bootmem.h>
#include <asm/machdep.h>
@@ -281,8 +280,5 @@ define_machine(ps3) {
.halt = ps3_halt,
#if defined(CONFIG_KEXEC)
.kexec_cpu_down = ps3_kexec_cpu_down,
- .machine_kexec = default_machine_kexec,
- .machine_kexec_prepare = default_machine_kexec_prepare,
- .machine_crash_shutdown = default_machine_crash_shutdown,
#endif
};
--
1.5.6.5
prev parent reply other threads:[~2008-12-16 16:23 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-12-16 16:22 [PATCH 0/3] Kexec for PPC32 (6xx) machines Anton Vorontsov
2008-12-16 16:22 ` [PATCH 1/3] powerpc: Setup OF properties for ppc32 kexec Anton Vorontsov
2008-12-16 16:23 ` [PATCH 2/3] powerpc: Make default kexec/crash_kernel ops implicit Anton Vorontsov
2008-12-21 23:08 ` Michael Ellerman
2008-12-22 0:11 ` Anton Vorontsov
2008-12-23 0:15 ` Michael Ellerman
2008-12-16 16:23 ` Anton Vorontsov [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20081216162308.GC21749@oksana.dev.rtsoft.ru \
--to=avorontsov@ru.mvista.com \
--cc=linuxppc-dev@ozlabs.org \
--cc=miltonm@bga.com \
--cc=paulus@samba.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.