From: Greg 'groggy' Lehey <grog@lemis.com>
To: linux-dvb@linuxtv.org
Subject: [linux-dvb] Support for Afatech 9035 (Aldi Fission USB tuner)
Date: Wed, 17 Dec 2008 11:27:35 +1100 [thread overview]
Message-ID: <20081217002735.GF45924@dereel.lemis.com> (raw)
[-- Attachment #1.1.1: Type: text/plain, Size: 3206 bytes --]
I have a dual USB tuner from Aldi, which they call a Fission dual high
definition DVB-T receiver. There's almost no identification on it,
but I've put some photos at
http://www.lemis.com/grog/photos/Photos.php?size=tiny&dirdate=20081217
in case somebody recognizes the form. The lsusb output identifies it
as an Afa Technologies Inc. AF9035A USB Device, but the supplied
(Microsoft-only) software often refers to it as a 9015. I'm attaching
lsusb output.
My first questions: is anybody working on this or a similar device?
Can I help? Is there any hope of getting it to work with a reasonable
amount of effort?
More details:
I'm using Ubuntu 8.10 on i386 with the latest v4l Hg sources, and I
can't get it recognized. dmesg output (complete version is attached)
says:
[ 789.696018] usb 4-3: new high speed USB device using ehci_hcd and address 2
[ 789.846003] usb 4-3: configuration #1 chosen from 1 choice
[ 790.052259] usbcore: registered new interface driver hiddev
[ 790.056703] input: Afa Technologies Inc. AF9035A USB Device as /devices/pci0000:00/0000:00:10.3/usb4/4-3/4-3:1.1/input/input8
[ 790.057902] input,hidraw0: USB HID v1.01 Keyboard [Afa Technologies Inc. AF9035A USB Device] on usb-0000:00:10.3-3
[ 790.058287] usbcore: registered new interface driver usbhid
[ 790.058511] usbhid: v2.6:USB HID core driver
I've been following the instructions on the wiki, and I've got hold of
the firmware files dvb-usb-af9015.fw and xc3028-v27.fw. The former
doesn't get loaded; the latter gets loaded even if the stick isn't
present:
[ 15.559113] firmware: requesting xc3028-v27.fw
[ 18.046874] xc2028 1-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7
[ 18.060053] xc2028 1-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.
[ 26.604094] xc2028 1-0061: Loading firmware for type=(0), id 0000000100000007.
[ 37.240018] xc2028 1-0061: Loading firmware for type=BASE FM (401), id 0000000000000000.
[ 45.560019] xc2028 1-0061: Loading firmware for type=FM (400), id 0000000000000000.
[ 45.928030] xc2028 1-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.
[ 54.456030] xc2028 1-0061: Loading firmware for type=(0), id 0000000100000007.
How does that happen? I've checked configuration files and things,
but I can't see any mechanism for autoloading on boot. What makes it
load automatically? Should I be using the same method to load the
dvb-usb-af9015.fw firmware too? I've put it in /lib/firmware, but
nothing exciting happens.
Looking at v4l/af9015.c, it seems that I need to match the ID string
to one of the entries in the af9015_properties structure. I did that
(copying the details for another device), but it didn't make any
difference: it's still just recognized as a HID device.
Where do I go from here? If somebody's prepared to give me a bit of
guidance, I'd like to get the thing working. Here in Australia
they're very cheap ($79 for a dual tuner), and the results under
Microsoft don't look bad. My main questions are: how do I go about
the problem most effectively?
Greg
--
Finger grog@Freebsd.org for PGP public key.
See complete headers for address and phone numbers.
[-- Attachment #1.1.2: lsusb --]
[-- Type: text/plain, Size: 6887 bytes --]
Bus 001 Device 003: ID 15a4:1001
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x15a4
idProduct 0x1001
bcdDevice 2.00
iManufacturer 1 Afa Technologies Inc.
iProduct 2 AF9035A USB Device
iSerial 3 AF0103250800001
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 122
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 5
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x85 EP 5 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0000 1x 0 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 1
bNumEndpoints 5
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x85 EP 5 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x1400 3x 1024 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 0 No Subclass
bInterfaceProtocol 1 Keyboard
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.01
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 65
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 10
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)
[-- Attachment #1.1.3: dmesg --]
[-- Type: text/plain, Size: 31964 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.27-9-generic (buildd@rothera) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu11) ) #1 SMP Thu Nov 20 21:57:00 UTC 2008 (Ubuntu 2.6.27-9.19-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
[ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff8000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003fff8000 - 0000000040000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] last_pfn = 0x3fff0 max_arch_pfn = 0x100000
[ 0.000000] kernel direct mapping tables up to 38000000 @ 7000-c000
[ 0.000000] RAMDISK: 03936000 - 040fe3ff
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP 000FA940, 0014 (r0 AMI )
[ 0.000000] ACPI: RSDT 3FFF0000, 002C (r1 AMIINT VIA_K7 10 MSFT 97)
[ 0.000000] ACPI: FACP 3FFF0030, 0081 (r1 AMIINT VIA_K7 11 MSFT 97)
[ 0.000000] ACPI: DSDT 3FFF0120, 32BF (r1 VIA VIA_K7 1000 MSFT 100000D)
[ 0.000000] ACPI: FACS 3FFF8000, 0040
[ 0.000000] ACPI: APIC 3FFF00C0, 0054 (r1 AMIINT VIA_K7 9 MSFT 97)
[ 0.000000] 127MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 38000000
[ 0.000000] low ram: 00000000 - 38000000
[ 0.000000] bootmap 00008000 - 0000f000
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 0038000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00005c0a20] TEXT DATA BSS ==> [0000100000 - 00005c0a20]
[ 0.000000] #4 [0003936000 - 00040fe3ff] RAMDISK ==> [0003936000 - 00040fe3ff]
[ 0.000000] #5 [00005c1000 - 00005c4000] INIT_PG_TABLE ==> [00005c1000 - 00005c4000]
[ 0.000000] #6 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #7 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
[ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
[ 0.000000] found SMP MP-table at [c00fb930] 000fb930
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x00038000
[ 0.000000] HighMem 0x00038000 -> 0x0003fff0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003fff0
[ 0.000000] On node 0 totalpages: 262031
[ 0.000000] free_area_init_node: node 0, pgdat c048a580, node_mem_map c1000000
[ 0.000000] DMA zone: 3963 pages, LIFO batch:0
[ 0.000000] Normal zone: 223300 pages, LIFO batch:31
[ 0.000000] HighMem zone: 32464 pages, LIFO batch:7
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
[ 0.000000] PERCPU: Allocating 41628 bytes of per cpu data
[ 0.000000] NR_CPUS: 64, nr_cpu_ids: 1, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259727
[ 0.000000] Kernel command line: auto BOOT_IMAGE=Linux ro root=/dev/sda1
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] TSC: PIT calibration confirmed by PMTIMER.
[ 0.000000] TSC: using PMTIMER calibration value
[ 0.000000] Detected 1837.495 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] Memory: 1024740k/1048512k available (2572k kernel code, 22948k reserved, 1160k data, 424k init, 131008k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB)
[ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.004000] vmalloc : 0xf8800000 - 0xff3fe000 ( 107 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 0.004000] .init : 0xc04ab000 - 0xc0515000 ( 424 kB)
[ 0.004000] .data : 0xc038335a - 0xc04a5680 (1160 kB)
[ 0.004000] .text : 0xc0100000 - 0xc038335a (2572 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.004000] SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.004018] Calibrating delay loop (skipped), value calculated using timer frequency.. 3674.99 BogoMIPS (lpj=7349980)
[ 0.004170] Security Framework initialized
[ 0.004241] SELinux: Disabled at boot.
[ 0.004339] AppArmor: AppArmor initialized
[ 0.004410] Mount-cache hash table entries: 512
[ 0.004715] Initializing cgroup subsys ns
[ 0.004780] Initializing cgroup subsys cpuacct
[ 0.004842] Initializing cgroup subsys memory
[ 0.004922] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004988] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.005069] Checking 'hlt' instruction... OK.
[ 0.020455] SMP alternatives: switching to UP code
[ 0.026611] Freeing SMP alternatives: 11k freed
[ 0.026676] ACPI: Core revision 20080609
[ 0.028536] ACPI: Checking initramfs for custom DSDT
[ 0.390184] ENABLING IO-APIC IRQs
[ 0.390558] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.430315] CPU0: AMD Athlon(tm) XP 2500+ stepping 00
[ 0.432027] Brought up 1 CPUs
[ 0.432027] Total of 1 processors activated (3674.99 BogoMIPS).
[ 0.432027] CPU0 attaching sched-domain:
[ 0.432027] domain 0: span 0 level CPU
[ 0.432027] groups: 0
[ 0.432027] net_namespace: 840 bytes
[ 0.432027] Booting paravirtualized kernel on bare hardware
[ 0.432027] Time: 23:50:24 Date: 12/16/08
[ 0.432027] NET: Registered protocol family 16
[ 0.432027] EISA bus registered
[ 0.432027] ACPI: bus type pci registered
[ 0.433930] PCI: PCI BIOS revision 2.10 entry at 0xfdaf1, last bus=1
[ 0.433996] PCI: Using configuration type 1 for base access
[ 0.435956] ACPI: EC: Look up EC in DSDT
[ 0.443284] ACPI: Interpreter enabled
[ 0.443348] ACPI: (supports S0 S1 S4 S5)
[ 0.443586] ACPI: Using IOAPIC for interrupt routing
[ 0.450191] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.450355] PCI: 0000:00:00.0 reg 10 32bit mmio: [e0000000, e7ffffff]
[ 0.450421] pci 0000:00:01.0: supports D1
[ 0.450453] PCI: 0000:00:06.0 reg 10 32bit mmio: [dffff800, dfffffff]
[ 0.450488] pci 0000:00:06.0: supports D1
[ 0.450490] pci 0000:00:06.0: supports D2
[ 0.450519] PCI: 0000:00:07.0 reg 10 32bit mmio: [dd000000, ddffffff]
[ 0.450576] PCI: 0000:00:07.2 reg 10 32bit mmio: [de000000, deffffff]
[ 0.450659] PCI: 0000:00:10.0 reg 20 io port: [e400, e41f]
[ 0.450678] pci 0000:00:10.0: supports D1
[ 0.450680] pci 0000:00:10.0: supports D2
[ 0.450683] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.450751] pci 0000:00:10.0: PME# disabled
[ 0.450848] PCI: 0000:00:10.1 reg 20 io port: [e800, e81f]
[ 0.450868] pci 0000:00:10.1: supports D1
[ 0.450870] pci 0000:00:10.1: supports D2
[ 0.450873] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.450939] pci 0000:00:10.1: PME# disabled
[ 0.451036] PCI: 0000:00:10.2 reg 20 io port: [ec00, ec1f]
[ 0.451056] pci 0000:00:10.2: supports D1
[ 0.451058] pci 0000:00:10.2: supports D2
[ 0.451060] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.451127] pci 0000:00:10.2: PME# disabled
[ 0.451209] PCI: 0000:00:10.3 reg 10 32bit mmio: [dffff700, dffff7ff]
[ 0.451243] pci 0000:00:10.3: supports D1
[ 0.451246] pci 0000:00:10.3: supports D2
[ 0.451248] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.451315] pci 0000:00:10.3: PME# disabled
[ 0.451431] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.451501] pci 0000:00:11.0: quirk: region 0800-087f claimed by vt8235 PM
[ 0.451568] pci 0000:00:11.0: quirk: region 0400-040f claimed by vt8235 SMB
[ 0.451677] PCI: 0000:00:11.1 reg 20 io port: [fc00, fc0f]
[ 0.451725] PCI: 0000:00:11.5 reg 10 io port: [e000, e0ff]
[ 0.451762] pci 0000:00:11.5: supports D1
[ 0.451764] pci 0000:00:11.5: supports D2
[ 0.451790] PCI: 0000:00:12.0 reg 10 io port: [dc00, dcff]
[ 0.451797] PCI: 0000:00:12.0 reg 14 32bit mmio: [dffff600, dffff6ff]
[ 0.451829] pci 0000:00:12.0: supports D1
[ 0.451831] pci 0000:00:12.0: supports D2
[ 0.451833] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.451900] pci 0000:00:12.0: PME# disabled
[ 0.452001] PCI: 0000:01:00.0 reg 10 32bit mmio: [da000000, daffffff]
[ 0.452007] PCI: 0000:01:00.0 reg 14 32bit mmio: [d0000000, d7ffffff]
[ 0.452024] PCI: 0000:01:00.0 reg 30 32bit mmio: [dbee0000, dbefffff]
[ 0.452069] PCI: bridge 0000:00:01.0 32bit mmio: [d9e00000, dbefffff]
[ 0.452075] PCI: bridge 0000:00:01.0 32bit mmio pref: [c9d00000, d9cfffff]
[ 0.452082] bus 00 -> node 0
[ 0.452091] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.455188] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.455897] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.456609] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.457314] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 *6 7 10 11 12 14 15)
[ 0.458020] ACPI: Power Resource [URP1] (off)
[ 0.458129] ACPI: Power Resource [URP2] (off)
[ 0.458236] ACPI: Power Resource [FDDP] (off)
[ 0.458342] ACPI: Power Resource [LPTP] (off)
[ 0.458511] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.458626] pnp: PnP ACPI init
[ 0.458694] ACPI: bus type pnp registered
[ 0.463394] pnp: PnP ACPI: found 12 devices
[ 0.463456] ACPI: ACPI bus type pnp unregistered
[ 0.463520] PnPBIOS: Disabled by ACPI PNP
[ 0.464239] PCI: Using ACPI for IRQ routing
[ 0.464438] NET: Registered protocol family 8
[ 0.464438] NET: Registered protocol family 20
[ 0.464438] NetLabel: Initializing
[ 0.464438] NetLabel: domain hash size = 128
[ 0.464438] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.464438] NetLabel: unlabeled traffic allowed by default
[ 0.464818] tracer: 772 pages allocated for 65536 entries of 48 bytes
[ 0.464883] actual entries 65620
[ 0.465212] AppArmor: AppArmor Filesystem Enabled
[ 0.465290] ACPI: RTC can wake from S4
[ 0.465359] system 00:01: ioport range 0x290-0x297 has been reserved
[ 0.465359] system 00:01: ioport range 0x3f0-0x3f1 has been reserved
[ 0.465359] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 0.465359] system 00:01: ioport range 0x400-0x40f has been reserved
[ 0.465359] system 00:01: ioport range 0x800-0x87f has been reserved
[ 0.465359] system 00:01: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 0.501503] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.501567] pci 0000:00:01.0: IO window: disabled
[ 0.501633] pci 0000:00:01.0: MEM window: 0xd9e00000-0xdbefffff
[ 0.501699] pci 0000:00:01.0: PREFETCH window: 0x000000c9d00000-0x000000d9cfffff
[ 0.501792] pci 0000:00:01.0: setting latency timer to 64
[ 0.501797] bus: 00 index 0 io port: [0, ffff]
[ 0.501858] bus: 00 index 1 mmio: [0, ffffffff]
[ 0.501920] bus: 01 index 0 mmio: [0, 0]
[ 0.501980] bus: 01 index 1 mmio: [d9e00000, dbefffff]
[ 0.502042] bus: 01 index 2 mmio: [c9d00000, d9cfffff]
[ 0.502105] bus: 01 index 3 mmio: [0, 0]
[ 0.502176] NET: Registered protocol family 2
[ 0.502396] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.502944] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.504958] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.506022] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.506968] TCP reno registered
[ 0.507205] NET: Registered protocol family 1
[ 0.507435] checking if image is initramfs... it is
[ 1.004080] Switched to high resolution mode on CPU 0
[ 1.299823] Freeing initrd memory: 7968k freed
[ 1.301095] audit: initializing netlink socket (disabled)
[ 1.301182] type=2000 audit(1229471424.300:1): initialized
[ 1.307662] highmem bounce pool size: 64 pages
[ 1.307732] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.311114] VFS: Disk quotas dquot_6.5.1
[ 1.311304] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.311519] msgmni has been set to 1762
[ 1.311750] io scheduler noop registered
[ 1.311812] io scheduler anticipatory registered
[ 1.311873] io scheduler deadline registered
[ 1.311946] io scheduler cfq registered (default)
[ 1.312069] PCI: VIA PCI bridge detected.Disabling DAC.
[ 1.312215] pci 0000:01:00.0: Boot video device
[ 1.313049] isapnp: Scanning for PnP cards...
[ 1.666710] isapnp: No Plug & Play device found
[ 1.723868] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.724123] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.724371] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.725314] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.725779] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.728497] brd: module loaded
[ 1.728663] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 1.728918] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.729427] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.729495] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.730322] mice: PS/2 mouse device common for all mice
[ 1.730596] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.730692] rtc0: alarms up to one year, y3k
[ 1.730928] EISA: Probing bus 0 at eisa.0
[ 1.731028] EISA: Detected 0 cards.
[ 1.731091] cpuidle: using governor ladder
[ 1.731152] cpuidle: using governor menu
[ 1.731876] TCP cubic registered
[ 1.731972] Using IPI No-Shortcut mode
[ 1.732333] registered taskstats version 1
[ 1.732517] Magic number: 4:468:858
[ 1.732743] tty ptysd: hash matches
[ 1.732910] rtc_cmos 00:03: setting system clock to 2008-12-16 23:50:25 UTC (1229471425)
[ 1.732991] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.733054] EDD information not available.
[ 1.733742] Freeing unused kernel memory: 424k freed
[ 1.733869] Write protecting the kernel text: 2576k
[ 1.733970] Write protecting the kernel read-only data: 936k
[ 1.762048] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 1.870174] fuse init (API version 7.9)
[ 1.903838] processor ACPI0007:00: registered as cooling_device0
[ 2.552590] usbcore: registered new interface driver usbfs
[ 2.552695] usbcore: registered new interface driver hub
[ 2.552834] usbcore: registered new device driver usb
[ 2.555582] USB Universal Host Controller Interface driver v3.0
[ 2.559267] uhci_hcd 0000:00:10.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 2.559351] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 2.559485] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[ 2.559603] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000e400
[ 2.559924] usb usb1: configuration #1 chosen from 1 choice
[ 2.560038] hub 1-0:1.0: USB hub found
[ 2.560111] hub 1-0:1.0: 2 ports detected
[ 2.605646] No dock devices found.
[ 2.679261] SCSI subsystem initialized
[ 2.682633] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[ 2.732654] libata version 3.00 loaded.
[ 2.768456] uhci_hcd 0000:00:10.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 2.768541] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 2.768634] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[ 2.768740] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000e800
[ 2.768938] usb usb2: configuration #1 chosen from 1 choice
[ 2.769034] hub 2-0:1.0: USB hub found
[ 2.769105] hub 2-0:1.0: 2 ports detected
[ 2.976420] uhci_hcd 0000:00:10.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[ 2.976504] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 2.976605] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[ 2.976709] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000ec00
[ 2.976910] usb usb3: configuration #1 chosen from 1 choice
[ 2.977014] hub 3-0:1.0: USB hub found
[ 2.977086] hub 3-0:1.0: 2 ports detected
[ 3.184499] ehci_hcd 0000:00:10.3: PCI INT D -> GSI 21 (level, low) -> IRQ 21
[ 3.184592] ehci_hcd 0000:00:10.3: EHCI Host Controller
[ 3.184687] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[ 3.184819] ehci_hcd 0000:00:10.3: irq 21, io mem 0xdffff700
[ 3.196044] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 3.196399] usb usb4: configuration #1 chosen from 1 choice
[ 3.196501] hub 4-0:1.0: USB hub found
[ 3.196574] hub 4-0:1.0: 6 ports detected
[ 3.300493] via-rhine 0000:00:12.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3.304853] eth0: VIA Rhine II at 0xdffff600, 00:0c:76:96:49:98, IRQ 23.
[ 3.305625] eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
[ 3.310020] pata_acpi 0000:00:11.1: can't derive routing for PCI INT A
[ 3.310169] pata_acpi 0000:00:11.1: can't derive routing for PCI INT A
[ 3.314661] pata_via 0000:00:11.1: version 0.3.3
[ 3.314676] pata_via 0000:00:11.1: can't derive routing for PCI INT A
[ 3.315310] scsi0 : pata_via
[ 3.315551] scsi1 : pata_via
[ 3.318042] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[ 3.318109] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[ 3.481622] ata1.00: ATA-6: WDC WD2000JB-00GVC0, 08.02D08, max UDMA/100
[ 3.481696] ata1.00: 390721968 sectors, multi 16: LBA48
[ 3.497495] ata1.00: configured for UDMA/100
[ 3.660424] ata2.00: ATAPI: PIONEER DVD-RW DVR-109, 1.09, max UDMA/66
[ 3.676378] ata2.00: configured for UDMA/66
[ 3.676594] scsi 0:0:0:0: Direct-Access ATA WDC WD2000JB-00G 08.0 PQ: 0 ANSI: 5
[ 3.682939] scsi 1:0:0:0: CD-ROM PIONEER DVD-RW DVR-109 1.09 PQ: 0 ANSI: 5
[ 3.692624] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.692755] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[ 3.717800] Driver 'sd' needs updating - please use bus_type methods
[ 3.718051] sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
[ 3.718145] sd 0:0:0:0: [sda] Write Protect is off
[ 3.718208] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.718256] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.718440] sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
[ 3.718529] sd 0:0:0:0: [sda] Write Protect is off
[ 3.718592] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.718635] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.718719] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 3.739609] sda1 sda2
[ 3.760047] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.767031] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[ 3.767109] Uniform CD-ROM driver Revision: 3.20
[ 3.767322] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 3.980563] PM: Starting manual resume from disk
[ 3.980629] PM: Resume from partition 8:2
[ 3.980632] PM: Checking hibernation image.
[ 3.980804] PM: Resume from disk failed.
[ 3.997522] SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
[ 3.999733] SGI XFS Quota Management subsystem
[ 4.043310] XFS mounting filesystem sda1
[ 4.257714] Ending clean XFS mount for filesystem: sda1
[ 12.084581] udevd version 124 started
[ 12.891280] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 12.943000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 13.103021] Linux agpgart interface v0.103
[ 13.444388] agpgart: Detected VIA KT400/KT400A/KT600 chipset
[ 13.452805] agpgart-via 0000:00:00.0: AGP aperture is 128M @ 0xe0000000
[ 13.598812] Linux video capture interface: v2.00
[ 13.924853] irda_init()
[ 13.924877] NET: Registered protocol family 23
[ 14.234541] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 14.250357] ACPI: Power Button (FF) [PWRF]
[ 14.250616] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 14.260907] ACPI: Power Button (CM) [PWRB]
[ 14.262107] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
[ 14.276046] ACPI: Sleep Button (CM) [SLPB]
[ 14.467600] cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded
[ 14.468379] cx88[0]: subsystem: 18ac:db10, board: DViCO FusionHDTV DVB-T Plus [card=21,autodetected], frontend(s): 1
[ 14.468464] cx88[0]: TV tuner type 4, Radio tuner type -1
[ 14.534670] saa7130/34: v4l2 driver version 0.2.14 loaded
[ 14.697654] cx88/0: cx2388x v4l2 driver version 0.0.6 loaded
[ 14.714893] cx88[0]/2: cx2388x 8802 Driver Manager
[ 14.714990] cx88-mpeg driver manager 0000:00:07.2: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 14.715077] cx88[0]/2: found at 0000:00:07.2, rev: 5, irq: 18, latency: 32, mmio: 0xde000000
[ 14.715188] cx8802_probe() allocating 1 frontend(s)
[ 14.715336] saa7134 0000:00:06.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 14.715407] saa7133[0]: found at 0000:00:06.0, rev: 209, irq: 17, latency: 32, mmio: 0xdffff800
[ 14.715493] saa7133[0]: subsystem: 1461:f936, board: AVerMedia Hybrid TV/Radio (A16D) [card=137,autodetected]
[ 14.715588] saa7133[0]: board init: gpio is 300000
[ 14.736644] input: saa7134 IR (AVerMedia Hybrid TV as /devices/pci0000:00/0000:00:06.0/input/input5
[ 14.801006] parport_pc 00:0b: reported by Plug and Play ACPI
[ 14.801180] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 15.048290] saa7133[0]: i2c eeprom 00: 61 14 36 f9 00 00 00 00 00 00 00 00 00 00 00 00
[ 15.049073] saa7133[0]: i2c eeprom 10: ff ff ff ff ff 20 ff ff ff ff ff ff ff ff ff ff
[ 15.049845] saa7133[0]: i2c eeprom 20: 01 40 01 02 02 01 01 00 08 ff 00 0e ff ff ff ff
[ 15.050616] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 15.051386] saa7133[0]: i2c eeprom 40: ff 65 00 ff c2 1e ff ff ff ff ff ff ff ff ff ff
[ 15.052167] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 15.052937] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 15.053708] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 15.054478] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 15.055250] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 15.056026] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 15.056798] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 15.057568] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 15.058340] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 15.059111] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 15.059882] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 15.271133] tuner' 1-0061: chip found @ 0xc2 (saa7133[0])
[ 15.558957] xc2028 1-0061: creating new instance
[ 15.559029] xc2028 1-0061: type set to XCeive xc2028/xc3028 tuner
[ 15.559113] firmware: requesting xc3028-v27.fw
[ 15.664807] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 16.037666] input: PS2++ Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input7
[ 18.046874] xc2028 1-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7
[ 18.060053] xc2028 1-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.
[ 26.604024] (0), id 00000000000000ff:
[ 26.604094] xc2028 1-0061: Loading firmware for type=(0), id 0000000100000007.
[ 26.772010] xc2028 1-0061: Loading SCODE for type=MONO SCODE HAS_IF_5320 (60008000), id 0000000f00000007.
[ 27.212905] saa7133[0]: registered device video0 [v4l2]
[ 27.213190] saa7133[0]: registered device vbi0
[ 27.213461] saa7133[0]: registered device radio0
[ 27.213653] cx8800 0000:00:07.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 27.213728] cx88[0]/0: found at 0000:00:07.0, rev: 5, irq: 18, latency: 32, mmio: 0xdd000000
[ 27.214044] cx88[0]/0: registered device video1 [v4l2]
[ 27.214322] cx88[0]/0: registered device vbi1
[ 27.215999] ACPI: I/O resource vt596_smbus [0x400-0x407] conflicts with ACPI region SMOV [0x400-0x406]
[ 27.216114] ACPI: Device needs an ACPI driver
[ 27.233343] VIA 82xx Audio 0000:00:11.5: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 27.233580] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
[ 27.259426] saa7134 ALSA driver for DMA sound loaded
[ 27.260485] saa7133[0]/alsa: saa7133[0] at 0xdffff800 irq 17 registered as card -2
[ 27.332712] cx88/2: cx2388x dvb driver version 0.0.6 loaded
[ 27.332786] cx88/2: registering cx8802 driver, type: dvb access: shared
[ 27.332853] cx88[0]/2: subsystem: 18ac:db10, board: DViCO FusionHDTV DVB-T Plus [card=21]
[ 27.332934] cx88[0]/2: cx2388x based DVB/ATSC card
[ 27.479634] DVB: registering new adapter (cx88[0])
[ 27.479709] DVB: registering adapter 0 frontend 0 (Zarlink ZL10353 DVB-T)...
[ 27.504389] dvb_init() allocating 1 frontend
[ 27.512221] xc2028 1-0061: attaching existing instance
[ 27.512295] xc2028 1-0061: type set to XCeive xc2028/xc3028 tuner
[ 27.512362] DVB: registering new adapter (saa7133[0])
[ 27.512427] DVB: registering adapter 1 frontend 0 (Zarlink MT352 DVB-T)...
[ 27.996419] loop: module loaded
[ 28.045729] lp0: using parport0 (interrupt-driven).
[ 28.229203] Adding 2000084k swap on /dev/sda2. Priority:-1 extents:1 across:2000084k
[ 29.056191] type=1505 audit(1229471453.161:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=3769
[ 29.332239] type=1505 audit(1229471453.437:3): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=3774
[ 29.332660] type=1505 audit(1229471453.437:4): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=3774
[ 29.423877] type=1505 audit(1229471453.525:5): operation="profile_load" name="/usr/sbin/mysqld" name2="default" pid=3778
[ 29.590474] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 29.652633] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 30.244775] NET: Registered protocol family 10
[ 30.245369] lo: Disabled Privacy Extensions
[ 30.923089] RPC: Registered udp transport module.
[ 30.923096] RPC: Registered tcp transport module.
[ 32.199784] ACPI: WMI: Mapper loaded
[ 33.200640] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[ 35.489859] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 35.489871] apm: overridden by ACPI.
[ 35.915358] ppdev: user-space parallel port driver
[ 36.329595] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 36.419127] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 36.420530] NFSD: starting 90-second grace period
[ 37.240018] xc2028 1-0061: Loading firmware for type=BASE FM (401), id 0000000000000000.
[ 40.900008] eth0: no IPv6 routers present
[ 45.560019] xc2028 1-0061: Loading firmware for type=FM (400), id 0000000000000000.
[ 45.928030] xc2028 1-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.
[ 54.456018] (0), id 00000000000000ff:
[ 54.456030] xc2028 1-0061: Loading firmware for type=(0), id 0000000100000007.
[ 54.624009] xc2028 1-0061: Loading SCODE for type=MONO SCODE HAS_IF_5320 (60008000), id 0000000f00000007.
[ 58.760993] Bluetooth: Core ver 2.13
[ 58.764301] NET: Registered protocol family 31
[ 58.764310] Bluetooth: HCI device and connection manager initialized
[ 58.764317] Bluetooth: HCI socket layer initialized
[ 58.812754] Bluetooth: L2CAP ver 2.11
[ 58.812764] Bluetooth: L2CAP socket layer initialized
[ 58.857237] Bluetooth: SCO (Voice Link) ver 0.6
[ 58.857247] Bluetooth: SCO socket layer initialized
[ 58.902772] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 58.902781] Bluetooth: BNEP filters: protocol multicast
[ 58.943971] Bluetooth: RFCOMM socket layer initialized
[ 58.944371] Bluetooth: RFCOMM TTY layer initialized
[ 58.944379] Bluetooth: RFCOMM ver 1.10
[ 59.030483] Bridge firewalling registered
[ 59.031686] pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
[ 789.696018] usb 4-3: new high speed USB device using ehci_hcd and address 2
[ 789.846003] usb 4-3: configuration #1 chosen from 1 choice
[ 790.052259] usbcore: registered new interface driver hiddev
[ 790.056703] input: Afa Technologies Inc. AF9035A USB Device as /devices/pci0000:00/0000:00:10.3/usb4/4-3/4-3:1.1/input/input8
[ 790.057902] input,hidraw0: USB HID v1.01 Keyboard [Afa Technologies Inc. AF9035A USB Device] on usb-0000:00:10.3-3
[ 790.058287] usbcore: registered new interface driver usbhid
[ 790.058511] usbhid: v2.6:USB HID core driver
[-- Attachment #1.2: Type: application/pgp-signature, Size: 195 bytes --]
[-- Attachment #2: Type: text/plain, Size: 150 bytes --]
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
next reply other threads:[~2008-12-17 0:28 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-12-17 0:27 Greg 'groggy' Lehey [this message]
2008-12-17 4:42 ` [linux-dvb] Support for Afatech 9035 (Aldi Fission USB tuner) Jarod Wilson
2008-12-17 11:23 ` Jos Hoekstra
2008-12-17 17:28 ` Jarod Wilson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20081217002735.GF45924@dereel.lemis.com \
--to=grog@lemis.com \
--cc=linux-dvb@linuxtv.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.