From mboxrd@z Thu Jan 1 00:00:00 1970 From: Marcin =?iso-8859-2?q?Pi=B1tek?= Date: Thu, 18 Dec 2008 16:53:42 +0100 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-2" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <200812181653.42193.rtos@domain.hid> Subject: [Xenomai-help] ARM9-based board Reply-To: rtos@domain.hid List-Id: Help regarding installation and common use of Xenomai List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: xenomai@xenomai.org Hello, I have used the Xenomai on the PC for last 2 years and I think its great system but lately I have decided that my application requires something smaller then PC. I would like to use some board with ARM9 processor and I even tried to make some experiments with one of these but it appeard that there's a lot of problems with this. I believe that most of these problems occured because the board designers haven't predicted that some users would like to change the system (migrate to new kernel version, use root file system on NFS partition) and nobody can help me with this. So I have this question to you: could you please recommend me some board that you use or used and you already know that it is ok? This the list of my requirements: - ARM9 processor - GNU/Linux (kernel 2.6.x) with Xenomai 2.4.x has to work with this board - Ethernet - USB - I need to run Real-Time Serial Driver with serial port to communicate with my special hardware - at the development stage I would like to run system from NFS partition on my PC (this configuration has to be tested!, this was the biggest problem that I had with previous board) I think it's quite common application and some of you probably already do such a things with your board? best regards Marcin