Re: [PATCH v2] powerpc/4xx: DTS: Add Add'l SDRAM0 Compatible and Interrupt Info

[Josh Boyer <jwboyer@linux.vnet.ibm.com>]

On Thu, Dec 18, 2008 at 10:04:48AM -0800, Grant Erickson wrote:
>On 12/18/08 9:56 AM, Josh Boyer wrote:
>> On Thu, Dec 18, 2008 at 09:04:23AM +0100, Stefan Roese wrote:
>>> On Thursday 18 December 2008, Grant Erickson wrote:
>>>> diff --git a/arch/powerpc/boot/dts/haleakala.dts
>>>> b/arch/powerpc/boot/dts/haleakala.dts index 513bc43..64880ab 100644
>>>> --- a/arch/powerpc/boot/dts/haleakala.dts
>>>> +++ b/arch/powerpc/boot/dts/haleakala.dts
>>>> @@ -89,8 +89,14 @@
>>>> clock-frequency = <0>; /* Filled in by U-Boot */
>>>> 
>>>> SDRAM0: memory-controller {
>>>> -   compatible = "ibm,sdram-405exr";
>>>> +   compatible = "ibm,sdram-405exr", "ibm,sdram-4xx-ddr2";
>>>> dcr-reg = <0x010 0x002>;
>>>> +   #interrupt-cells = <1>;
>>>> +   interrupt-parent = <&SDRAM0>;
>>>> +   interrupts = <0x0 0x1>;
>>>> +   interrupt-map = </* ECCDED Error */ 0x0 &UIC2 0x5 0x4
>>>> +      /* ECCSEC Error */ 0x1 &UIC2 0x6 0x4>;
>>>> +   interrupt-map-mask = <0xffffffff>;
>>> 
>>> When all interrupts are mapped the same parent, this should do as well:
>>> 
>>> interrupt-parent = <&UIC2>;
>>> interrupts = <0x5 0x4 /* ECCDED Error */
>>>      0x6 0x4>; /* ECCSEC Error */
>>> 
>>> Other than this:
>>> 
>>> Acked-by: Stefan Roese <sr@denx.de>
>> 
>> Yeah, I agree.  Adding an interrupt map when it's not needed is
>> just complexity that doesn't need to be there.
>
>Stefan and Josh:
>
>From a programmatic perspective, does the above still allow the code to
>index virtual interrupt indices 0 and 1 rather than 5 and 6 when calling
>irq_of_parse_and_map()?

Yes.  The index parameter to irq_of_parse_and_map is just an index into
the interrupts property.  So index 0 will use the first set of numbers
that matches the required #interrupt-cells.  In this case it's two, one
for the hardware irq number and one for the level/edge/polarity settings.

josh