From: Geert Uytterhoeven <geert@linux-m68k.org>
To: Michael Schmitz <schmitz@opal.biophys.uni-duesseldorf.de>,
linux-fbdev-devel@lists.sourceforge.net
Cc: linux-m68k@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [patch 2/6] fbdev: atafb - Fix 16 bpp console
Date: Sun, 21 Dec 2008 16:01:01 +0100 [thread overview]
Message-ID: <20081221150122.191178920@mail.of.borg> (raw)
In-Reply-To: 20081221150059.844577615@mail.of.borg
[-- Attachment #1: atafb-16bpp.diff --]
[-- Type: text/plain, Size: 4259 bytes --]
- 16 bpp must use the cfb_*() ops
- 16 bpp needs to set up info->pseudo_palette[] (was fbcon_cfb16_cmap[] in
2.4.x)
- Kill commented out 2.4.x fbcon remnants
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
---
drivers/video/atafb.c | 74 ++++++++++++++++++++------------------------------
1 file changed, 30 insertions(+), 44 deletions(-)
--- a/drivers/video/atafb.c
+++ b/drivers/video/atafb.c
@@ -149,6 +149,7 @@ static struct atafb_par {
short mono;
short ste_mode;
short bpp;
+ u32 pseudo_palette[16];
} falcon;
#endif
/* Nothing needed for external mode */
@@ -885,10 +886,6 @@ static int vdl_prescale[4][3] = {
/* Default hsync timing [mon_type] in picoseconds */
static long h_syncs[4] = { 3000000, 4875000, 4000000, 4875000 };
-#ifdef FBCON_HAS_CFB16
-static u16 fbcon_cfb16_cmap[16];
-#endif
-
static inline int hxx_prescale(struct falcon_hw *hw)
{
return hw->ste_mode ? 16
@@ -1736,10 +1733,10 @@ static int falcon_setcolreg(unsigned int
(((red & 0xe000) >> 13) | ((red & 0x1000) >> 12) << 8) |
(((green & 0xe000) >> 13) | ((green & 0x1000) >> 12) << 4) |
((blue & 0xe000) >> 13) | ((blue & 0x1000) >> 12);
-#ifdef FBCON_HAS_CFB16
- fbcon_cfb16_cmap[regno] = ((red & 0xf800) |
- ((green & 0xfc00) >> 5) |
- ((blue & 0xf800) >> 11));
+#ifdef ATAFB_FALCON
+ ((u32 *)info->pseudo_palette)[regno] = ((red & 0xf800) |
+ ((green & 0xfc00) >> 5) |
+ ((blue & 0xf800) >> 11));
#endif
}
return 0;
@@ -2447,42 +2444,6 @@ static void atafb_set_disp(struct fb_inf
atafb_get_fix(&info->fix, info);
info->screen_base = (void *)info->fix.smem_start;
-
- switch (info->fix.type) {
- case FB_TYPE_INTERLEAVED_PLANES:
- switch (info->var.bits_per_pixel) {
- case 2:
- // display->dispsw = &fbcon_iplan2p2;
- break;
- case 4:
- // display->dispsw = &fbcon_iplan2p4;
- break;
- case 8:
- // display->dispsw = &fbcon_iplan2p8;
- break;
- }
- break;
- case FB_TYPE_PACKED_PIXELS:
- switch (info->var.bits_per_pixel) {
-#ifdef FBCON_HAS_MFB
- case 1:
- // display->dispsw = &fbcon_mfb;
- break;
-#endif
-#ifdef FBCON_HAS_CFB8
- case 8:
- // display->dispsw = &fbcon_cfb8;
- break;
-#endif
-#ifdef FBCON_HAS_CFB16
- case 16:
- // display->dispsw = &fbcon_cfb16;
- // display->dispsw_data = fbcon_cfb16_cmap;
- break;
-#endif
- }
- break;
- }
}
static int atafb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
@@ -2553,6 +2514,13 @@ static void atafb_fillrect(struct fb_inf
if (!rect->width || !rect->height)
return;
+#ifdef ATAFB_FALCON
+ if (info->var.bits_per_pixel == 16) {
+ cfb_fillrect(info, rect);
+ return;
+ }
+#endif
+
/*
* We could use hardware clipping but on many cards you get around
* hardware clipping by writing to framebuffer directly.
@@ -2587,6 +2555,13 @@ static void atafb_copyarea(struct fb_inf
u32 dx, dy, sx, sy, width, height;
int rev_copy = 0;
+#ifdef ATAFB_FALCON
+ if (info->var.bits_per_pixel == 16) {
+ cfb_copyarea(info, area);
+ return;
+ }
+#endif
+
/* clip the destination */
x2 = area->dx + area->width;
y2 = area->dy + area->height;
@@ -2636,6 +2611,13 @@ static void atafb_imageblit(struct fb_in
const char *src;
u32 dx, dy, width, height, pitch;
+#ifdef ATAFB_FALCON
+ if (info->var.bits_per_pixel == 16) {
+ cfb_imageblit(info, image);
+ return;
+ }
+#endif
+
/*
* We could use hardware clipping but on many cards you get around
* hardware clipping by writing to framebuffer directly like we are
@@ -3229,6 +3211,10 @@ int __init atafb_init(void)
// tries to read from HW which may not be initialized yet
// so set sane var first, then call atafb_set_par
atafb_get_var(&fb_info.var, &fb_info);
+
+#ifdef ATAFB_FALCON
+ fb_info.pseudo_palette = current_par.hw.falcon.pseudo_palette;
+#endif
fb_info.flags = FBINFO_FLAG_DEFAULT;
if (!fb_find_mode(&fb_info.var, &fb_info, mode_option, atafb_modedb,
--
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
next prev parent reply other threads:[~2008-12-21 15:01 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-12-21 15:00 [patch 0/6] [patch 0/6] Atari frame buffer fixes Geert Uytterhoeven
2008-12-21 15:01 ` [patch 1/6] fbdev: atafb - Fix line length handling Geert Uytterhoeven
2008-12-21 15:01 ` Geert Uytterhoeven [this message]
2008-12-21 15:01 ` [patch 3/6] fbdev: c2p - Cleanups Geert Uytterhoeven
2008-12-22 23:22 ` Andrew Morton
2008-12-23 8:13 ` Geert Uytterhoeven
2008-12-21 15:01 ` [patch 4/6] fbdev: c2p - Extract common c2p core to c2p_core.h Geert Uytterhoeven
2008-12-21 15:01 ` [patch 5/6] fbdev: c2p/atafb - Add support for Atari interleaved bitplanes Geert Uytterhoeven
2008-12-21 15:01 ` [patch 6/6] fbdev: c2p - Rename c2p to c2p_planar and correct indentation Geert Uytterhoeven
2008-12-22 23:23 ` Andrew Morton
2008-12-23 8:02 ` Geert Uytterhoeven
2008-12-22 23:24 ` [patch 0/6] [patch 0/6] Atari frame buffer fixes Andrew Morton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20081221150122.191178920@mail.of.borg \
--to=geert@linux-m68k.org \
--cc=linux-fbdev-devel@lists.sourceforge.net \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-m68k@vger.kernel.org \
--cc=schmitz@opal.biophys.uni-duesseldorf.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.