From: Christian Lamparter <chunkeey@web.de>
To: wireless <linux-wireless@vger.kernel.org>
Cc: John W Linville <linville@tuxdriver.com>,
Larry Finger <Larry.Finger@lwfinger.net>
Subject: [PATCH 1/3] p54usb: utilize usb_reset_device for 3887
Date: Fri, 26 Dec 2008 19:08:31 +0100 [thread overview]
Message-ID: <200812261908.31998.chunkeey@web.de> (raw)
Sometimes on unload or reboot the 3887 USB devices become stuck.
<usual log entry>
kernel: usbcore: registered new interface driver p54usb
kernel: usb 2-10: (p54usb) reset failed! (-110)
kernel: p54usb: probe of 2-10:1.0 failed with error -110
[...]
and a physical unplug and replug was necessary.
However we should be able to do this in software as well,
without any user interaction.
Signed-off-by: Christian Lamparter <chunkeey@web.de>
---
diff -Nurp a/drivers/net/wireless/p54/p54usb.c b/drivers/net/wireless/p54/p54usb.c
--- a/drivers/net/wireless/p54/p54usb.c 2008-12-26 13:23:36.000000000 +0100
+++ b/drivers/net/wireless/p54/p54usb.c 2008-12-26 17:47:54.000000000 +0100
@@ -428,9 +428,44 @@ static int p54u_bulk_msg(struct p54u_pri
data, len, &alen, 2000);
}
+static const char p54u_romboot_3887[] = "~~~~";
+static const char p54u_firmware_upload_3887[] = "<\r";
+
+static int p54u_device_reset_3887(struct ieee80211_hw *dev)
+{
+ struct p54u_priv *priv = dev->priv;
+ int ret, lock;
+ u8 buf[4];
+
+ ret = lock = usb_lock_device_for_reset(priv->udev, priv->intf);
+ if (ret < 0) {
+ dev_err(&priv->udev->dev, "(p54usb) unable to lock device for "
+ "reset: %d\n", ret);
+ return ret;
+ }
+
+ ret = usb_reset_device(priv->udev);
+ if (lock)
+ usb_unlock_device(priv->udev);
+
+ if (ret) {
+ dev_err(&priv->udev->dev, "(p54usb) unable to reset "
+ "device: %d\n", ret);
+ return ret;
+ }
+
+ memcpy(&buf, p54u_romboot_3887, sizeof(buf));
+ ret = p54u_bulk_msg(priv, P54U_PIPE_DATA,
+ buf, sizeof(buf));
+ if (ret)
+ dev_err(&priv->udev->dev, "(p54usb) unable to jump to "
+ "boot ROM: %d\n", ret);
+
+ return ret;
+}
+
static int p54u_upload_firmware_3887(struct ieee80211_hw *dev)
{
- static char start_string[] = "~~~~<\r";
struct p54u_priv *priv = dev->priv;
const struct firmware *fw_entry = NULL;
int err, alen;
@@ -449,12 +484,9 @@ static int p54u_upload_firmware_3887(str
goto err_bufalloc;
}
- memcpy(buf, start_string, 4);
- err = p54u_bulk_msg(priv, P54U_PIPE_DATA, buf, 4);
- if (err) {
- dev_err(&priv->udev->dev, "(p54usb) reset failed! (%d)\n", err);
+ err = p54u_device_reset_3887(dev);
+ if (err)
goto err_reset;
- }
err = request_firmware(&fw_entry, "isl3887usb", &priv->udev->dev);
if (err) {
@@ -471,14 +503,14 @@ static int p54u_upload_firmware_3887(str
goto err_upload_failed;
left = block_size = min((size_t)P54U_FW_BLOCK, fw_entry->size);
- strcpy(buf, start_string);
- left -= strlen(start_string);
- tmp += strlen(start_string);
+ strcpy(buf, p54u_firmware_upload_3887);
+ left -= strlen(p54u_firmware_upload_3887);
+ tmp += strlen(p54u_firmware_upload_3887);
data = fw_entry->data;
remains = fw_entry->size;
- hdr = (struct x2_header *)(buf + strlen(start_string));
+ hdr = (struct x2_header *)(buf + strlen(p54u_firmware_upload_3887));
memcpy(hdr->signature, X2_SIGNATURE, X2_SIGNATURE_SIZE);
hdr->fw_load_addr = cpu_to_le32(ISL38XX_DEV_FIRMWARE_ADDR);
hdr->fw_length = cpu_to_le32(fw_entry->size);
@@ -881,6 +913,9 @@ static int __devinit p54u_probe(struct u
SET_IEEE80211_DEV(dev, &intf->dev);
usb_set_intfdata(intf, dev);
priv->udev = udev;
+ priv->intf = intf;
+ skb_queue_head_init(&priv->rx_queue);
+ init_usb_anchor(&priv->submitted);
usb_get_dev(udev);
@@ -923,9 +958,6 @@ static int __devinit p54u_probe(struct u
if (err)
goto err_free_dev;
- skb_queue_head_init(&priv->rx_queue);
- init_usb_anchor(&priv->submitted);
-
p54u_open(dev);
err = p54_read_eeprom(dev);
p54u_stop(dev);
@@ -963,11 +995,23 @@ static void __devexit p54u_disconnect(st
ieee80211_free_hw(dev);
}
+static int p54u_pre_reset(struct usb_interface *intf)
+{
+ return 0;
+}
+
+static int p54u_post_reset(struct usb_interface *intf)
+{
+ return 0;
+}
+
static struct usb_driver p54u_driver = {
.name = "p54usb",
.id_table = p54u_table,
.probe = p54u_probe,
.disconnect = p54u_disconnect,
+ .pre_reset = p54u_pre_reset,
+ .post_reset = p54u_post_reset,
};
static int __init p54u_init(void)
diff -Nurp a/drivers/net/wireless/p54/p54usb.h b/drivers/net/wireless/p54/p54usb.h
--- a/drivers/net/wireless/p54/p54usb.h 2008-12-26 13:23:36.000000000 +0100
+++ b/drivers/net/wireless/p54/p54usb.h 2008-12-26 15:16:24.000000000 +0100
@@ -126,6 +126,7 @@ struct p54u_rx_info {
struct p54u_priv {
struct p54_common common;
struct usb_device *udev;
+ struct usb_interface *intf;
enum {
P54U_NET2280 = 0,
P54U_3887
reply other threads:[~2008-12-26 18:08 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200812261908.31998.chunkeey@web.de \
--to=chunkeey@web.de \
--cc=Larry.Finger@lwfinger.net \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.