[ath9k-devel] ath9k for ar9102 and ar9103, OpenWRT, AP81 router hardware

[Luis R. Rodriguez <lrodriguez@atheros.com>]

On Sun, Dec 28, 2008 at 02:22:31PM -0800, Stephen Gutknecht (hilltx) wrote:
> A major discovery, good news!  Through exhaustive searching of every
> bit I could find about AHB drivers, I stumbled into the source code
> for the Atheros Radio Testing (ART) for these routers.  From my AP81
> router (Trendnet TEW-652BRP, DLink DIR-615 C1) running OpenWRT trunk:
> 
> 
> root at OpenWrt:/tmp# insmod art.ko
> CHIP REV ID: b4
> dk_dev_init::status after register_chrdev(dk) = 0
>  Base Phsycal address :0x180c0000
> DK::Add client 0
> DK::Reg phy addr = 180c0000 vir Addr = b80c0000
> DK::Irq = 2
> DK::Allocated 0x200000 bytes memory
> DK::memory vir Addr = 80c00000 phy Addr = c00000
> Device Status is : 0x11
> root at OpenWrt:/tmp# uname -a
> Linux OpenWrt 2.6.27.10 #18 Sat Dec 27 13:54:44 CST 2008 mips unknown
> 
> 
> The art driver was made for 2.6.15, I updated it to work on newer
> kernels.  It has all the juicy details that an experienced ath9k
> developer should need to get these chips working.
> 
> driver source AP81/AP83:
> http://svn.openfoundry.org/jpgdauto/atheros/art_modules_v0_7_b9.tbz
> 
> Patch for newer kernels:
> http://forum.openwrt.org/viewtopic.php?pid=78718#p78718

These should *not* be posted as they are not part of the driver, whoever
posted this is violating our license and this will be looked into.

Avoid using this as a source of documentation.

  Luis