From: Thomas Meyer <thomas.mey-S0/GAf8tV78@public.gmane.org>
To: acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
Subject: AE_AML_BUFFER_LIMIT with handmade dsdt file
Date: Wed, 16 Nov 2005 22:28:23 +0100 [thread overview]
Message-ID: <2008842009@web.de> (raw)
Hi.
On one window the acpi spec on the other window the dsdl.dsl file, i *thoughed* i fixed my dsdt file but now i get this errors:
[17179570.604000] ACPI-0508: *** Error: Method execution failed [\_SB_.PCI0._CRS] (Node ebec4b00), AE_AML_BUFFER_LIMIT
[17179570.604000] ACPI-0156: *** Error: Method execution failed [\_SB_.PCI0._CRS] (Node ebec4b00), AE_AML_BUFFER_LIMIT
the method _CRS for the given object is a larger one in the dsdt file. is this some kind of violation of the maximum buffer length (code length in AML?) or something like that?
should i care about this error?
Thanks & regards
Thomas
dmesg:
"
[17179569.184000] Linux version 2.6.15-rc1-g0db169f9 (thomas@hotzenplotz) (gcc-Version 3.4.4 (Gentoo Hardened 3.4.4-r1, ssp-3.4.4-1.0, pie-8.7.8)) #69 Wed Nov 16 21:41:01 CET 2005
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[17179569.184000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[17179569.184000] BIOS-e820: 00000000000d8000 - 0000000000100000 (reserved)
[17179569.184000] BIOS-e820: 0000000000100000 - 000000002bef0000 (usable)
[17179569.184000] BIOS-e820: 000000002bef0000 - 000000002befb000 (ACPI data)
[17179569.184000] BIOS-e820: 000000002befb000 - 000000002bf00000 (ACPI NVS)
[17179569.184000] BIOS-e820: 000000002bf00000 - 0000000030000000 (reserved)
[17179569.184000] BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved)
[17179569.184000] 702MB LOWMEM available.
[17179569.184000] On node 0 totalpages: 179952
[17179569.184000] DMA zone: 4096 pages, LIFO batch:2
[17179569.184000] DMA32 zone: 0 pages, LIFO batch:2
[17179569.184000] Normal zone: 175856 pages, LIFO batch:64
[17179569.184000] HighMem zone: 0 pages, LIFO batch:2
[17179569.184000] DMI 2.3 present.
[17179569.184000] ACPI: RSDP (v000 PTLTD ) @ 0x000f6890
[17179569.184000] ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x2bef5b5f
[17179569.184000] ACPI: FADT (v001 KN400 PTLTW 0x06040000 PTL_ 0x000f4240) @ 0x2befae95
[17179569.184000] ACPI: SSDT (v001 PTLTD POWERNOW 0x06040000 LTP 0x00000001) @ 0x2befaf09
[17179569.184000] ACPI: DSDT (v001 VIA PTL_ACPI 0x06040000 MSFT 0x0100000e) @ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0x4008
[17179569.184000] Allocating PCI resources starting at 40000000 (gap: 30000000:cffe0000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/hda3 resume=/dev/hda4 log_buf_len=4M kstack=300
[17179569.184000] log_buf_len: 4194304
[17179569.184000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[17179569.184000] mapped APIC to ffffd000 (01985000)
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 4096 (order: 12, 65536 bytes)
[17179569.184000] Detected 796.218 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179570.432000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[17179570.432000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179570.472000] Memory: 705808k/719808k available (1879k kernel code, 13476k reserved, 589k data, 184k init, 0k highmem)
[17179570.472000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[17179570.552000] Calibrating delay using timer specific routine.. 1594.34 BogoMIPS (lpj=3188696)
[17179570.552000] Mount-cache hash table entries: 512
[17179570.552000] CPU: After generic identify, caps: 0383f9ff c1cbf9ff 00000000 00000000 00000000 00000000 00000000
[17179570.552000] CPU: After vendor identify, caps: 0383f9ff c1cbf9ff 00000000 00000000 00000000 00000000 00000000
[17179570.552000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[17179570.552000] CPU: L2 Cache: 512K (64 bytes/line)
[17179570.552000] CPU: After all inits, caps: 0383f9ff c1cbf9ff 00000000 00000020 00000000 00000000 00000000
[17179570.552000] Intel machine check architecture supported.
[17179570.552000] Intel machine check reporting enabled on CPU#0.
[17179570.552000] mtrr: v2.0 (20020519)
[17179570.552000] CPU: AMD Mobile AMD Athlon(tm) XP 2400+ stepping 00
[17179570.552000] Enabling fast FPU save and restore... done.
[17179570.552000] Enabling unmasked SIMD FPU exception support... done.
[17179570.552000] Checking 'hlt' instruction... OK.
[17179570.568000] ACPI-0284: *** Info: Table [DSDT] replaced by host OS
[17179570.588000] ACPI: setting ELCR to 0400 (from 0a30)
[17179570.592000] NET: Registered protocol family 16
[17179570.592000] ACPI: bus type pci registered
[17179570.592000] PCI: PCI BIOS revision 2.10 entry at 0xfd65c, last bus=1
[17179570.592000] PCI: Using configuration type 1
[interessting part begins here!]
[17179570.592000] ACPI: Subsystem revision 20050902
[17179570.600000] ACPI: Interpreter enabled
[17179570.600000] ACPI: Using PIC for interrupt routing
[17179570.604000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179570.604000] PCI: Probing PCI hardware (bus 00)
[17179570.604000] ACPI-0508: *** Error: Method execution failed [\_SB_.PCI0._CRS] (Node ebec4b00), AE_AML_BUFFER_LIMIT
[17179570.604000] ACPI-0156: *** Error: Method execution failed [\_SB_.PCI0._CRS] (Node ebec4b00), AE_AML_BUFFER_LIMIT
[17179570.608000] PCI quirk: region 4000-407f claimed by vt8235 PM
[17179570.608000] PCI quirk: region 8100-810f claimed by vt8235 SMB
[17179570.612000] Boot video device is 0000:01:00.0
[17179570.612000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179570.624000] ACPI: PCI Interrupt Link [LNKA] (IRQs *4)
[17179570.624000] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[17179570.624000] ACPI: PCI Interrupt Link [LNKC] (IRQs *9)
[17179570.624000] ACPI: PCI Interrupt Link [LNKD] (IRQs *11)
[17179570.632000] ACPI: Embedded Controller [EC0] (gpe 1)
[17179570.636000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179570.636000] pnp: PnP ACPI init
[17179570.644000] pnp: PnP ACPI: found 11 devices
[17179570.648000] PnPBIOS: Disabled by ACPI PNP
[17179570.648000] PCI: Using ACPI for IRQ routing
[17179570.648000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[17179570.648000] pnp: 00:05: ioport range 0x4d0-0x4d1 has been reserved
[17179570.648000] pnp: 00:05: ioport range 0xfe10-0xfe11 has been reserved
[17179570.648000] pnp: 00:05: ioport range 0x600-0x60f has been reserved
[17179570.648000] pnp: 00:05: ioport range 0xfe00-0xfe00 has been reserved
[17179570.648000] pnp: 00:05: ioport range 0x4000-0x407f could not be reserved
[17179570.652000] PCI: Failed to allocate mem resource #6:10000@f4000000 for 0000:01:00.0
[17179570.652000] PCI: Bridge: 0000:00:01.0
[17179570.652000] IO window: disabled.
[17179570.652000] MEM window: d1000000-d1ffffff
[17179570.652000] PREFETCH window: f0000000-f3ffffff
[17179570.652000] PCI: Bus 2, cardbus bridge: 0000:00:07.0
[17179570.652000] IO window: 00002000-000020ff
[17179570.652000] IO window: 00002400-000024ff
[17179570.652000] PREFETCH window: 40000000-41ffffff
[17179570.652000] MEM window: 42000000-43ffffff
[17179570.652000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[17179570.652000] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
[17179570.652000] PCI: setting IRQ 5 as level-triggered
[17179570.652000] ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
[17179570.652000] PCI: Setting latency timer of device 0000:00:07.0 to 64
[17179570.652000] Machine check exception polling timer started.
[17179570.652000] VFS: Disk quotas dquot_6.5.1
[17179570.652000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179570.652000] Initializing Cryptographic API
[17179570.652000] io scheduler noop registered
[17179570.652000] io scheduler anticipatory registered
[17179570.656000] isapnp: Scanning for PnP cards...
______________________________________________________________
Verschicken Sie romantische, coole und witzige Bilder per SMS!
Jetzt bei WEB.DE FreeMail: http://f.web.de/?mc=021193
-------------------------------------------------------
This SF.Net email is sponsored by the JBoss Inc. Get Certified Today
Register for a JBoss Training Course. Free Certification Exam
for All Training Attendees Through End of 2005. For more info visit:
http://ads.osdn.com/?ad_id=7628&alloc_id=16845&op=click
next reply other threads:[~2005-11-16 21:28 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-11-16 21:28 Thomas Meyer [this message]
-- strict thread matches above, loose matches on Subject: below --
2005-11-16 21:32 AE_AML_BUFFER_LIMIT with handmade dsdt file Moore, Robert
[not found] ` <971FCB6690CD0E4898387DBF7552B90E037162E9-sBd4vmA9Se5Qxe9IK+vIArfspsVTdybXVpNB7YpNyf8@public.gmane.org>
2005-11-17 14:18 ` Rathgeb Markus
2005-11-16 21:56 Thomas Meyer
2005-11-16 22:10 Moore, Robert
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2008842009@web.de \
--to=thomas.mey-s0/gaf8tv78@public.gmane.org \
--cc=acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.