From: Alan Cox <alan@lxorguk.ukuu.org.uk>
To: torvalds@osdl.org, linux-serial@vger.kernel.org
Subject: [PATCH 39/75] tty: Introduce a tty_port generic block_til_ready
Date: Fri, 02 Jan 2009 13:46:10 +0000 [thread overview]
Message-ID: <20090102134603.13472.34571.stgit@localhost.localdomain> (raw)
In-Reply-To: <20090102133822.13472.53912.stgit@localhost.localdomain>
From: Alan Cox <alan@redhat.com>
Start sucking more commonality out of the drivers into a single piece of
core code.
Signed-off-by: Alan Cox <alan@redhat.com>
---
drivers/char/isicom.c | 79 +----------------------------------
drivers/char/mxser.c | 71 --------------------------------
drivers/char/riscom8.c | 86 --------------------------------------
drivers/char/synclink.c | 1
drivers/char/tty_port.c | 105 +++++++++++++++++++++++++++++++++++++++++++++++
drivers/char/vme_scc.c | 6 +--
include/linux/tty.h | 2 +
7 files changed, 115 insertions(+), 235 deletions(-)
diff --git a/drivers/char/isicom.c b/drivers/char/isicom.c
index db53db9..bac55cf 100644
--- a/drivers/char/isicom.c
+++ b/drivers/char/isicom.c
@@ -838,82 +838,6 @@ static int isicom_carrier_raised(struct tty_port *port)
return (ip->status & ISI_DCD)?1 : 0;
}
-static int block_til_ready(struct tty_struct *tty, struct file *filp,
- struct isi_port *ip)
-{
- struct tty_port *port = &ip->port;
- int do_clocal = 0, retval;
- unsigned long flags;
- DECLARE_WAITQUEUE(wait, current);
- int cd;
-
- /* block if port is in the process of being closed */
-
- if (tty_hung_up_p(filp) || port->flags & ASYNC_CLOSING) {
- pr_dbg("block_til_ready: close in progress.\n");
- interruptible_sleep_on(&port->close_wait);
- if (port->flags & ASYNC_HUP_NOTIFY)
- return -EAGAIN;
- else
- return -ERESTARTSYS;
- }
-
- /* if non-blocking mode is set ... */
-
- if ((filp->f_flags & O_NONBLOCK) ||
- (tty->flags & (1 << TTY_IO_ERROR))) {
- pr_dbg("block_til_ready: non-block mode.\n");
- port->flags |= ASYNC_NORMAL_ACTIVE;
- return 0;
- }
-
- if (C_CLOCAL(tty))
- do_clocal = 1;
-
- /* block waiting for DCD to be asserted, and while
- callout dev is busy */
- retval = 0;
- add_wait_queue(&port->open_wait, &wait);
-
- spin_lock_irqsave(&port->lock, flags);
- if (!tty_hung_up_p(filp))
- port->count--;
- port->blocked_open++;
- spin_unlock_irqrestore(&port->lock, flags);
-
- while (1) {
- tty_port_raise_dtr_rts(port);
-
- set_current_state(TASK_INTERRUPTIBLE);
- if (tty_hung_up_p(filp) || !(port->flags & ASYNC_INITIALIZED)) {
- if (port->flags & ASYNC_HUP_NOTIFY)
- retval = -EAGAIN;
- else
- retval = -ERESTARTSYS;
- break;
- }
- cd = tty_port_carrier_raised(port);
- if (!(port->flags & ASYNC_CLOSING) &&
- (do_clocal || cd))
- break;
- if (signal_pending(current)) {
- retval = -ERESTARTSYS;
- break;
- }
- schedule();
- }
- set_current_state(TASK_RUNNING);
- remove_wait_queue(&port->open_wait, &wait);
- spin_lock_irqsave(&port->lock, flags);
- if (!tty_hung_up_p(filp))
- port->count++;
- port->blocked_open--;
- if (retval == 0)
- port->flags |= ASYNC_NORMAL_ACTIVE;
- spin_unlock_irqrestore(&port->lock, flags);
- return 0;
-}
-
static int isicom_open(struct tty_struct *tty, struct file *filp)
{
struct isi_port *port;
@@ -940,12 +864,13 @@ static int isicom_open(struct tty_struct *tty, struct file *filp)
isicom_setup_board(card);
+ /* FIXME: locking on port.count etc */
port->port.count++;
tty->driver_data = port;
tty_port_tty_set(&port->port, tty);
error = isicom_setup_port(tty);
if (error == 0)
- error = block_til_ready(tty, filp, port);
+ error = tty_port_block_til_ready(&port->port, tty, filp);
return error;
}
diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c
index e2471cf..08ba6eb 100644
--- a/drivers/char/mxser.c
+++ b/drivers/char/mxser.c
@@ -558,75 +558,6 @@ static void mxser_raise_dtr_rts(struct tty_port *port)
spin_unlock_irqrestore(&mp->slock, flags);
}
-static int mxser_block_til_ready(struct tty_struct *tty, struct file *filp,
- struct mxser_port *mp)
-{
- DECLARE_WAITQUEUE(wait, current);
- int retval;
- int do_clocal = 0;
- unsigned long flags;
- int cd;
- struct tty_port *port = &mp->port;
-
- /*
- * If non-blocking mode is set, or the port is not enabled,
- * then make the check up front and then exit.
- */
- if ((filp->f_flags & O_NONBLOCK) ||
- test_bit(TTY_IO_ERROR, &tty->flags)) {
- port->flags |= ASYNC_NORMAL_ACTIVE;
- return 0;
- }
-
- if (tty->termios->c_cflag & CLOCAL)
- do_clocal = 1;
-
- /*
- * Block waiting for the carrier detect and the line to become
- * free (i.e., not in use by the callout). While we are in
- * this loop, port->count is dropped by one, so that
- * mxser_close() knows when to free things. We restore it upon
- * exit, either normal or abnormal.
- */
- retval = 0;
- add_wait_queue(&port->open_wait, &wait);
-
- spin_lock_irqsave(&port->lock, flags);
- if (!tty_hung_up_p(filp))
- port->count--;
- port->blocked_open++;
- spin_unlock_irqrestore(&port->lock, flags);
- while (1) {
- tty_port_raise_dtr_rts(port);
- set_current_state(TASK_INTERRUPTIBLE);
- if (tty_hung_up_p(filp) || !(port->flags & ASYNC_INITIALIZED)) {
- if (port->flags & ASYNC_HUP_NOTIFY)
- retval = -EAGAIN;
- else
- retval = -ERESTARTSYS;
- break;
- }
- cd = tty_port_carrier_raised(port);
- if (!(port->flags & ASYNC_CLOSING) && (do_clocal || cd))
- break;
- if (signal_pending(current)) {
- retval = -ERESTARTSYS;
- break;
- }
- schedule();
- }
- set_current_state(TASK_RUNNING);
- remove_wait_queue(&port->open_wait, &wait);
- spin_lock_irqsave(&port->lock, flags);
- if (!tty_hung_up_p(filp))
- port->count++;
- port->blocked_open--;
- if (retval == 0)
- port->flags |= ASYNC_NORMAL_ACTIVE;
- spin_unlock_irqrestore(&port->lock, flags);
- return 0;
-}
-
static int mxser_set_baud(struct tty_struct *tty, long newspd)
{
struct mxser_port *info = tty->driver_data;
@@ -1110,7 +1041,7 @@ static int mxser_open(struct tty_struct *tty, struct file *filp)
if (retval)
return retval;
- retval = mxser_block_til_ready(tty, filp, info);
+ retval = tty_port_block_til_ready(&info->port, tty, filp);
if (retval)
return retval;
diff --git a/drivers/char/riscom8.c b/drivers/char/riscom8.c
index 14662d7..af34c20 100644
--- a/drivers/char/riscom8.c
+++ b/drivers/char/riscom8.c
@@ -874,90 +874,6 @@ static int carrier_raised(struct tty_port *port)
return CD;
}
-static int block_til_ready(struct tty_struct *tty, struct file *filp,
- struct riscom_port *rp)
-{
- DECLARE_WAITQUEUE(wait, current);
- int retval;
- int do_clocal = 0;
- int CD;
- unsigned long flags;
- struct tty_port *port = &rp->port;
-
- /*
- * If the device is in the middle of being closed, then block
- * until it's done, and then try again.
- */
- if (tty_hung_up_p(filp) || port->flags & ASYNC_CLOSING) {
- interruptible_sleep_on(&port->close_wait);
- if (port->flags & ASYNC_HUP_NOTIFY)
- return -EAGAIN;
- else
- return -ERESTARTSYS;
- }
-
- /*
- * If non-blocking mode is set, or the port is not enabled,
- * then make the check up front and then exit.
- */
- if ((filp->f_flags & O_NONBLOCK) ||
- (tty->flags & (1 << TTY_IO_ERROR))) {
- port->flags |= ASYNC_NORMAL_ACTIVE;
- return 0;
- }
-
- if (C_CLOCAL(tty))
- do_clocal = 1;
-
- /*
- * Block waiting for the carrier detect and the line to become
- * free (i.e., not in use by the callout). While we are in
- * this loop, info->count is dropped by one, so that
- * rs_close() knows when to free things. We restore it upon
- * exit, either normal or abnormal.
- */
- retval = 0;
- add_wait_queue(&port->open_wait, &wait);
-
- spin_lock_irqsave(&port->lock, flags);
- if (!tty_hung_up_p(filp))
- port->count--;
- port->blocked_open++;
- spin_unlock_irqrestore(&port->lock, flags);
-
- while (1) {
-
- CD = tty_port_carrier_raised(port);
- set_current_state(TASK_INTERRUPTIBLE);
- if (tty_hung_up_p(filp) ||
- !(port->flags & ASYNC_INITIALIZED)) {
- if (port->flags & ASYNC_HUP_NOTIFY)
- retval = -EAGAIN;
- else
- retval = -ERESTARTSYS;
- break;
- }
- if (!(port->flags & ASYNC_CLOSING) &&
- (do_clocal || CD))
- break;
- if (signal_pending(current)) {
- retval = -ERESTARTSYS;
- break;
- }
- schedule();
- }
- __set_current_state(TASK_RUNNING);
- remove_wait_queue(&port->open_wait, &wait);
- spin_lock_irqsave(&port->lock, flags);
- if (!tty_hung_up_p(filp))
- port->count++;
- port->blocked_open--;
- if (retval == 0)
- port->flags |= ASYNC_NORMAL_ACTIVE;
- spin_unlock_irqrestore(&port->lock, flags);
- return 0;
-}
-
static int rc_open(struct tty_struct *tty, struct file *filp)
{
int board;
@@ -984,7 +900,7 @@ static int rc_open(struct tty_struct *tty, struct file *filp)
error = rc_setup_port(bp, port);
if (error == 0)
- error = block_til_ready(tty, filp, port);
+ error = tty_port_block_til_ready(&port->port, tty, filp);
return error;
}
diff --git a/drivers/char/synclink.c b/drivers/char/synclink.c
index ac9f21e..0ded4ed 100644
--- a/drivers/char/synclink.c
+++ b/drivers/char/synclink.c
@@ -3401,6 +3401,7 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp,
set_current_state(TASK_RUNNING);
remove_wait_queue(&port->open_wait, &wait);
+ /* FIXME: Racy on hangup during close wait */
if (extra_count)
port->count++;
port->blocked_open--;
diff --git a/drivers/char/tty_port.c b/drivers/char/tty_port.c
index 9f418bc..ff94182 100644
--- a/drivers/char/tty_port.c
+++ b/drivers/char/tty_port.c
@@ -151,3 +151,108 @@ void tty_port_raise_dtr_rts(struct tty_port *port)
port->ops->raise_dtr_rts(port);
}
EXPORT_SYMBOL(tty_port_raise_dtr_rts);
+
+/**
+ * tty_port_block_til_ready - Waiting logic for tty open
+ * @port: the tty port being opened
+ * @tty: the tty device being bound
+ * @filp: the file pointer of the opener
+ *
+ * Implement the core POSIX/SuS tty behaviour when opening a tty device.
+ * Handles:
+ * - hangup (both before and during)
+ * - non blocking open
+ * - rts/dtr/dcd
+ * - signals
+ * - port flags and counts
+ *
+ * The passed tty_port must implement the carrier_raised method if it can
+ * do carrier detect and the raise_dtr_rts method if it supports software
+ * management of these lines. Note that the dtr/rts raise is done each
+ * iteration as a hangup may have previously dropped them while we wait.
+ */
+
+int tty_port_block_til_ready(struct tty_port *port,
+ struct tty_struct *tty, struct file *filp)
+{
+ int do_clocal = 0, retval;
+ unsigned long flags;
+ DECLARE_WAITQUEUE(wait, current);
+ int cd;
+
+ /* block if port is in the process of being closed */
+ if (tty_hung_up_p(filp) || port->flags & ASYNC_CLOSING) {
+ interruptible_sleep_on(&port->close_wait);
+ if (port->flags & ASYNC_HUP_NOTIFY)
+ return -EAGAIN;
+ else
+ return -ERESTARTSYS;
+ }
+
+ /* if non-blocking mode is set we can pass directly to open unless
+ the port has just hung up or is in another error state */
+ if ((filp->f_flags & O_NONBLOCK) ||
+ (tty->flags & (1 << TTY_IO_ERROR))) {
+ port->flags |= ASYNC_NORMAL_ACTIVE;
+ return 0;
+ }
+
+ if (C_CLOCAL(tty))
+ do_clocal = 1;
+
+ /* Block waiting until we can proceed. We may need to wait for the
+ carrier, but we must also wait for any close that is in progress
+ before the next open may complete */
+
+ retval = 0;
+ add_wait_queue(&port->open_wait, &wait);
+
+ /* The port lock protects the port counts */
+ spin_lock_irqsave(&port->lock, flags);
+ if (!tty_hung_up_p(filp))
+ port->count--;
+ port->blocked_open++;
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ while (1) {
+ /* Indicate we are open */
+ tty_port_raise_dtr_rts(port);
+
+ set_current_state(TASK_INTERRUPTIBLE);
+ /* Check for a hangup or uninitialised port. Return accordingly */
+ if (tty_hung_up_p(filp) || !(port->flags & ASYNC_INITIALIZED)) {
+ if (port->flags & ASYNC_HUP_NOTIFY)
+ retval = -EAGAIN;
+ else
+ retval = -ERESTARTSYS;
+ break;
+ }
+ /* Probe the carrier. For devices with no carrier detect this
+ will always return true */
+ cd = tty_port_carrier_raised(port);
+ if (!(port->flags & ASYNC_CLOSING) &&
+ (do_clocal || cd))
+ break;
+ if (signal_pending(current)) {
+ retval = -ERESTARTSYS;
+ break;
+ }
+ schedule();
+ }
+ set_current_state(TASK_RUNNING);
+ remove_wait_queue(&port->open_wait, &wait);
+
+ /* Update counts. A parallel hangup will have set count to zero and
+ we must not mess that up further */
+ spin_lock_irqsave(&port->lock, flags);
+ if (!tty_hung_up_p(filp))
+ port->count++;
+ port->blocked_open--;
+ if (retval == 0)
+ port->flags |= ASYNC_NORMAL_ACTIVE;
+ spin_unlock_irqrestore(&port->lock, flags);
+ return 0;
+
+}
+EXPORT_SYMBOL(tty_port_block_til_ready);
+
diff --git a/drivers/char/vme_scc.c b/drivers/char/vme_scc.c
index d4e1534..2d9242a 100644
--- a/drivers/char/vme_scc.c
+++ b/drivers/char/vme_scc.c
@@ -631,8 +631,8 @@ static void scc_enable_rx_interrupts(void *ptr)
static int scc_carrier_raised(struct tty_port *port)
{
- struct scc_port *scc = container_of(port, struct scc_port, gs.port);
- unsigned channel = port->channel;
+ struct scc_port *sc = container_of(port, struct scc_port, gs.port);
+ unsigned channel = sc->channel;
return !!(scc_last_status_reg[channel] & SR_DCD);
}
@@ -643,7 +643,7 @@ static void scc_shutdown_port(void *ptr)
struct scc_port *port = ptr;
port->gs.port.flags &= ~ GS_ACTIVE;
- if (port->gs.port.tty && port->gs.port.tty->termios->c_cflag & HUPCL) {
+ if (port->gs.port.tty && (port->gs.port.tty->termios->c_cflag & HUPCL)) {
scc_setsignals (port, 0, 0);
}
}
diff --git a/include/linux/tty.h b/include/linux/tty.h
index a1a9314..61a0ab3 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -439,6 +439,8 @@ extern void tty_port_tty_set(struct tty_port *port, struct tty_struct *tty);
extern int tty_port_carrier_raised(struct tty_port *port);
extern void tty_port_raise_dtr_rts(struct tty_port *port);
extern void tty_port_hangup(struct tty_port *port);
+extern int tty_port_block_til_ready(struct tty_port *port,
+ struct tty_struct *tty, struct file *filp);
extern int tty_register_ldisc(int disc, struct tty_ldisc_ops *new_ldisc);
extern int tty_unregister_ldisc(int disc);
next prev parent reply other threads:[~2009-01-02 13:46 UTC|newest]
Thread overview: 79+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-01-02 13:40 [PATCH 00/75] TTY updates for 2.6.29-rc Alan Cox
2009-01-02 13:40 ` [PATCH 01/75] Blackfin Serial Driver: updates kgdb over Blackfin serial driver with kgdb framework Alan Cox
2009-01-02 13:40 ` [PATCH 02/75] Blackfin Serial Driver: fix bug - SIR driver stop receiving randomly Alan Cox
2009-01-02 13:40 ` [PATCH 03/75] Blackfin Serial Driver: Clean serial console and early prink code Alan Cox
2009-01-02 13:40 ` [PATCH 04/75] Blackfin Serial Driver: Fix bug - BF527-EZKIT unable to receive large files over UART in DMA mode Alan Cox
2009-01-02 13:40 ` [PATCH 05/75] Blackfin Serial Driver: Remove BI status for known_good_char Alan Cox
2009-01-02 13:40 ` [PATCH 06/75] n_tty: Fix loss of echoed characters and remove bkl from n_tty Alan Cox
2009-01-02 13:41 ` [PATCH 07/75] n_tty: clean up coding style Alan Cox
2009-01-02 13:41 ` [PATCH 08/75] Remove devpts_root global Alan Cox
2009-01-02 13:41 ` [PATCH 09/75] Per-mount allocated_ptys Alan Cox
2009-01-02 19:47 ` Michał Mirosław
2009-01-02 13:41 ` [PATCH 10/75] Per-mount 'config' object Alan Cox
2009-01-02 13:41 ` [PATCH 11/75] Extract option parsing to new function Alan Cox
2009-01-02 13:41 ` [PATCH 12/75] Add DEVPTS_MULTIPLE_INSTANCES config token Alan Cox
2009-01-02 13:42 ` [PATCH 13/75] Define mknod_ptmx() Alan Cox
2009-01-02 13:42 ` [PATCH 14/75] Define get_init_pts_sb() Alan Cox
2009-01-02 13:42 ` [PATCH 15/75] Enable multiple instances of devpts Alan Cox
2009-01-02 13:42 ` [PATCH 16/75] Document usage of multiple-instances " Alan Cox
2009-01-02 13:42 ` [PATCH 17/75] devpts: Coding style clean up Alan Cox
2009-01-02 13:42 ` [PATCH 18/75] sierra: Fix formatting Alan Cox
2009-01-02 13:43 ` [PATCH 19/75] tty: Fix sparse static warning for tty_driver_lookup_tty Alan Cox
2009-01-02 13:43 ` [PATCH 20/75] pty: simplify resize Alan Cox
2009-01-02 13:43 ` [PATCH 21/75] n_tty: Fix handling of control characters and continuations Alan Cox
2009-01-02 13:43 ` [PATCH 22/75] n_tty: Fix hanfling of buffer full corner cases Alan Cox
2009-01-02 13:43 ` [PATCH 23/75] n_tty: Output bells immediately on a full buffer Alan Cox
2009-01-02 13:44 ` [PATCH 24/75] tty: Fix close races in USB serial Alan Cox
2009-01-02 13:44 ` [PATCH 25/75] devpts: fix unused function warning Alan Cox
2009-01-02 13:44 ` [PATCH 26/75] Convert the oxsemi tornado special cases to use the quirk interface and not Alan Cox
2009-01-02 13:44 ` [PATCH 27/75] And here's a patch (to be applied on top of the last) which prevents Alan Cox
2009-01-02 13:44 ` [PATCH 28/75] Add device function for USB serial console Alan Cox
2009-01-02 13:44 ` [PATCH 29/75] CRED: Wrap task credential accesses in the devpts filesystem Alan Cox
2009-01-02 13:44 ` [PATCH 30/75] tty: Fix PPP hang under load Alan Cox
2009-01-02 13:45 ` [PATCH 31/75] tty_port: Add a port level carrier detect operation Alan Cox
2009-01-02 13:45 ` [PATCH 32/75] rio: Kill off ckmalloc Alan Cox
2009-01-02 13:45 ` [PATCH 33/75] tty: Pull the dtr raise into tty port Alan Cox
2009-01-02 13:45 ` [PATCH 34/75] isicom: redo locking to use tty port locks Alan Cox
2009-01-02 13:45 ` [PATCH 35/75] tty: relock generic_serial Alan Cox
2009-01-02 13:45 ` [PATCH 36/75] tty: rocketport uses different port flags to everyone else Alan Cox
2009-01-02 13:45 ` [PATCH 37/75] tty: relock riscom8 using port locks Alan Cox
2009-01-02 13:45 ` [PATCH 38/75] tty: relock the mxser driver Alan Cox
2009-01-02 13:46 ` Alan Cox [this message]
2009-01-02 13:46 ` [PATCH 40/75] tty: Rework istallion to use the tty port changes Alan Cox
2009-01-02 13:46 ` [PATCH 41/75] tty: rework stallion to use the tty_port bits Alan Cox
2009-01-02 13:46 ` [PATCH 42/75] tty: ESP has been broken for locking etc forver Alan Cox
2009-01-02 13:46 ` [PATCH 43/75] tty: tty port zero baud open Alan Cox
2009-01-02 13:46 ` [PATCH 44/75] tty: Introduce some close helpers for ports Alan Cox
2009-01-02 13:46 ` [PATCH 45/75] serial: set correct baud_base for Oxford Semiconductor Ltd EXSYS EX-41092 Dual 16950 Serial adapter Alan Cox
2009-01-02 13:47 ` [PATCH 46/75] tty: USB tty devices can block in tcdrain when unplugged Alan Cox
2009-01-02 13:47 ` [PATCH 47/75] tty: N_TTY SIGIO only works for read Alan Cox
2009-01-02 13:47 ` [PATCH 48/75] tty: PTYs set TTY_DO_WRITE_WAKEUP when they don't need to Alan Cox
2009-01-02 13:47 ` [PATCH 49/75] tty: Remove some pointless casts Alan Cox
2009-01-02 13:47 ` [PATCH 50/75] tty: kref nozomi Alan Cox
2009-01-02 13:47 ` [PATCH 51/75] hso: net driver using tty without locking Alan Cox
2009-01-02 13:47 ` [PATCH 52/75] tty: Fix the HSO termios handling a bit Alan Cox
2009-01-02 13:47 ` [PATCH 53/75] tty: Modem functions for the HSO driver Alan Cox
2009-01-02 13:47 ` [PATCH 54/75] tty: relock epca Alan Cox
2009-01-02 13:48 ` [PATCH 55/75] tty: refcount the epca driver Alan Cox
2009-01-02 13:48 ` [PATCH 56/75] tty: Make epca use the port helpers Alan Cox
2009-01-02 13:48 ` [PATCH 57/75] tty: Redo the rocket driver locking Alan Cox
2009-01-02 13:48 ` [PATCH 58/75] tty: make rocketport use standard port->flags Alan Cox
2009-01-02 13:48 ` [PATCH 59/75] tty: kref the rocket driver Alan Cox
2009-01-02 13:48 ` [PATCH 60/75] tty: use port methods for " Alan Cox
2009-01-02 13:48 ` [PATCH 61/75] synclink_cs: Convert to tty_port Alan Cox
2009-01-02 13:48 ` [PATCH 62/75] tty: Drop the lock_kernel in the private ioctl hook Alan Cox
2009-01-02 13:49 ` [PATCH 63/75] serial: RS485 ioctl structure uses __u32 include linux/types.h Alan Cox
2009-01-02 13:49 ` [PATCH 64/75] __FUNCTION__ is gcc-specific, use __func__ Alan Cox
2009-01-02 13:49 ` [PATCH 65/75] tty: We want the port object to be persistent Alan Cox
2009-01-02 13:49 ` [PATCH 66/75] fix for tty-serial-move-port Alan Cox
2009-01-02 13:49 ` [PATCH 67/75] 8250: Don't clobber spinlocks Alan Cox
2009-01-02 13:49 ` [PATCH 68/75] 8250: Serial driver changes to support future Cavium OCTEON serial patches Alan Cox
2009-01-02 13:49 ` [PATCH 69/75] Serial: Allow port type to be specified when calling serial8250_register_port Alan Cox
2009-01-02 13:50 ` [PATCH 70/75] Serial: UART driver changes for Cavium OCTEON Alan Cox
2009-01-02 13:50 ` [PATCH 71/75] drivers/char/cyclades.c: cy_pci_probe: fix error path Alan Cox
2009-01-02 13:50 ` [PATCH 72/75] tty: Fix an ircomm warning and note another bug Alan Cox
2009-01-05 17:42 ` Wolfram Sang
2009-01-05 18:01 ` Alan Cox
2009-01-02 13:50 ` [PATCH 73/75] hso modem detect fix patch against Alan Cox'es tty tree Alan Cox
2009-01-02 13:50 ` [PATCH 74/75] hso maintainers update patch Alan Cox
2009-01-02 13:50 ` [PATCH 75/75] serial_8250: support for Sealevel Systems Model 7803 COMM+8 Alan Cox
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090102134603.13472.34571.stgit@localhost.localdomain \
--to=alan@lxorguk.ukuu.org.uk \
--cc=linux-serial@vger.kernel.org \
--cc=torvalds@osdl.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.