From: Peter Stokes <linux@dadeos.co.uk>
To: alsa-devel@alsa-project.org
Subject: [PATCH 1/2] New Control Plugin - arcam-av
Date: Sat, 3 Jan 2009 20:56:35 +0000 [thread overview]
Message-ID: <200901032056.35982.linux@dadeos.co.uk> (raw)
Signed-off-by: Peter Stokes <linux@dadeos.co.uk>
diff -Nrup alsa-plugins-1.0.18-orig/Makefile.am
alsa-plugins-1.0.18/Makefile.am
--- alsa-plugins-1.0.18-orig/Makefile.am 2008-10-29 12:42:13.000000000 +0000
+++ alsa-plugins-1.0.18/Makefile.am 2009-01-02 22:22:26.000000000 +0000
@@ -18,7 +18,7 @@ if HAVE_PPH
PPHDIR = pph
endif
-SUBDIRS = oss mix $(PPHDIR) $(JACKDIR) $(PULSEDIR) $(SAMPLERATEDIR) $(A52DIR)
$(LAVCRATEDIR) $(MAEMODIR) usb_stream doc
+SUBDIRS = oss mix $(PPHDIR) $(JACKDIR) $(PULSEDIR) $(SAMPLERATEDIR) $(A52DIR)
$(LAVCRATEDIR) $(MAEMODIR) usb_stream arcam-av doc
EXTRA_DIST = gitcompile version COPYING.GPL
AUTOMAKE_OPTIONS = foreign
diff -Nrup alsa-plugins-1.0.18-orig/Makefile.in
alsa-plugins-1.0.18/Makefile.in
--- alsa-plugins-1.0.18-orig/Makefile.in 2008-10-29 12:47:44.000000000 +0000
+++ alsa-plugins-1.0.18/Makefile.in 2009-01-02 22:22:47.000000000 +0000
@@ -61,7 +61,7 @@ RECURSIVE_TARGETS = all-recursive check-
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = oss mix pph jack pulse rate a52 rate-lavc maemo \
- usb_stream doc
+ usb_stream arcam-av doc
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
@@ -212,7 +212,7 @@ target_alias = @target_alias@
@HAVE_AVCODEC_TRUE@LAVCRATEDIR = rate-lavc
@HAVE_MAEMO_PLUGIN_TRUE@MAEMODIR = maemo
@HAVE_PPH_TRUE@PPHDIR = pph
-SUBDIRS = oss mix $(PPHDIR) $(JACKDIR) $(PULSEDIR) $(SAMPLERATEDIR) $(A52DIR)
$(LAVCRATEDIR) $(MAEMODIR) usb_stream doc
+SUBDIRS = oss mix $(PPHDIR) $(JACKDIR) $(PULSEDIR) $(SAMPLERATEDIR) $(A52DIR)
$(LAVCRATEDIR) $(MAEMODIR) usb_stream arcam-av doc
EXTRA_DIST = gitcompile version COPYING.GPL
AUTOMAKE_OPTIONS = foreign
all: config.h
diff -Nrup alsa-plugins-1.0.18-orig/arcam-av/Makefile.am
alsa-plugins-1.0.18/arcam-av/Makefile.am
--- alsa-plugins-1.0.18-orig/arcam-av/Makefile.am 1970-01-01
01:00:00.000000000 +0100
+++ alsa-plugins-1.0.18/arcam-av/Makefile.am 2009-01-02 22:31:03.000000000
+0000
@@ -0,0 +1,9 @@
+asound_module_ctl_arcam_av_LTLIBRARIES = libasound_module_ctl_arcam_av.la
+
+asound_module_ctl_arcam_avdir = @ALSA_PLUGIN_DIR@
+
+AM_CFLAGS = -Wall -g @ALSA_CFLAGS@
+AM_LDFLAGS = -module -avoid-version -export-dynamic -no-undefined
+
+libasound_module_ctl_arcam_av_la_SOURCES = ctl_arcam_av.c arcam_av.c
arcam_av.h
+libasound_module_ctl_arcam_av_la_LIBADD = @ALSA_LIBS@
diff -Nrup alsa-plugins-1.0.18-orig/arcam-av/Makefile.in
alsa-plugins-1.0.18/arcam-av/Makefile.in
--- alsa-plugins-1.0.18-orig/arcam-av/Makefile.in 1970-01-01
01:00:00.000000000 +0100
+++ alsa-plugins-1.0.18/arcam-av/Makefile.in 2009-01-02 22:31:03.000000000
+0000
@@ -0,0 +1,495 @@
+# Makefile.in generated by automake 1.9.6 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ..
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+subdir = arcam-av
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
+ $(top_srcdir)/configure.in
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+ *) f=$$p;; \
+ esac;
+am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
+am__installdirs = "$(DESTDIR)$(asound_module_ctl_arcam_avdir)"
+asound_module_ctl_arcam_avLTLIBRARIES_INSTALL = $(INSTALL)
+LTLIBRARIES = $(asound_module_ctl_arcam_av_LTLIBRARIES)
+libasound_module_ctl_arcam_av_la_DEPENDENCIES =
+am_libasound_module_ctl_arcam_av_la_OBJECTS = ctl_arcam_av.lo \
+ arcam_av.lo
+libasound_module_ctl_arcam_av_la_OBJECTS = \
+ $(am_libasound_module_ctl_arcam_av_la_OBJECTS)
+DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)
+depcomp = $(SHELL) $(top_srcdir)/depcomp
+am__depfiles_maybe = depfiles
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) \
+ $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
+ $(AM_CFLAGS) $(CFLAGS)
+CCLD = $(CC)
+LINK = $(LIBTOOL) --tag=CC --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+ $(AM_LDFLAGS) $(LDFLAGS) -o $@
+SOURCES = $(libasound_module_ctl_arcam_av_la_SOURCES)
+DIST_SOURCES = $(libasound_module_ctl_arcam_av_la_SOURCES)
+ETAGS = etags
+CTAGS = ctags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+ALSA_CFLAGS = @ALSA_CFLAGS@
+ALSA_LIBS = @ALSA_LIBS@
+ALSA_PLUGIN_DIR = @ALSA_PLUGIN_DIR@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AVCODEC_CFLAGS = @AVCODEC_CFLAGS@
+AVCODEC_LIBS = @AVCODEC_LIBS@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DBUS_CFLAGS = @DBUS_CFLAGS@
+DBUS_LIBS = @DBUS_LIBS@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO = @ECHO@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+F77 = @F77@
+FFLAGS = @FFLAGS@
+GREP = @GREP@
+HAVE_AVCODEC_FALSE = @HAVE_AVCODEC_FALSE@
+HAVE_AVCODEC_TRUE = @HAVE_AVCODEC_TRUE@
+HAVE_JACK_FALSE = @HAVE_JACK_FALSE@
+HAVE_JACK_TRUE = @HAVE_JACK_TRUE@
+HAVE_MAEMO_PLUGIN_FALSE = @HAVE_MAEMO_PLUGIN_FALSE@
+HAVE_MAEMO_PLUGIN_TRUE = @HAVE_MAEMO_PLUGIN_TRUE@
+HAVE_PPH_FALSE = @HAVE_PPH_FALSE@
+HAVE_PPH_TRUE = @HAVE_PPH_TRUE@
+HAVE_PULSE_FALSE = @HAVE_PULSE_FALSE@
+HAVE_PULSE_TRUE = @HAVE_PULSE_TRUE@
+HAVE_SAMPLERATE_FALSE = @HAVE_SAMPLERATE_FALSE@
+HAVE_SAMPLERATE_TRUE = @HAVE_SAMPLERATE_TRUE@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+JACK_CFLAGS = @JACK_CFLAGS@
+JACK_LIBS = @JACK_LIBS@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PKG_CONFIG = @PKG_CONFIG@
+RANLIB = @RANLIB@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+USE_LIBSPEEX_FALSE = @USE_LIBSPEEX_FALSE@
+USE_LIBSPEEX_TRUE = @USE_LIBSPEEX_TRUE@
+VERSION = @VERSION@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_F77 = @ac_ct_F77@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
+am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+pulseaudio_CFLAGS = @pulseaudio_CFLAGS@
+pulseaudio_LIBS = @pulseaudio_LIBS@
+samplerate_CFLAGS = @samplerate_CFLAGS@
+samplerate_LIBS = @samplerate_LIBS@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+speex_CFLAGS = @speex_CFLAGS@
+speex_LIBS = @speex_LIBS@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+asound_module_ctl_arcam_av_LTLIBRARIES = libasound_module_ctl_arcam_av.la
+asound_module_ctl_arcam_avdir = @ALSA_PLUGIN_DIR@
+AM_CFLAGS = -Wall -g @ALSA_CFLAGS@
+AM_LDFLAGS = -module -avoid-version -export-dynamic -no-undefined
+libasound_module_ctl_arcam_av_la_SOURCES = ctl_arcam_av.c arcam_av.c
arcam_av.h
+libasound_module_ctl_arcam_av_la_LIBADD = @ALSA_LIBS@
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .lo .o .obj
+$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+ && exit 0; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign arcam-av/Makefile'; \
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --foreign arcam-av/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure
$(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+install-asound_module_ctl_arcam_avLTLIBRARIES:
$(asound_module_ctl_arcam_av_LTLIBRARIES)
+ @$(NORMAL_INSTALL)
+ test -z "$(asound_module_ctl_arcam_avdir)" ||
$(mkdir_p) "$(DESTDIR)$(asound_module_ctl_arcam_avdir)"
+ @list='$(asound_module_ctl_arcam_av_LTLIBRARIES)'; for p in $$list; do \
+ if test -f $$p; then \
+ f=$(am__strip_dir) \
+ echo " $(LIBTOOL) --mode=install
$(asound_module_ctl_arcam_avLTLIBRARIES_INSTALL)
$(INSTALL_STRIP_FLAG) '$$p' '$(DESTDIR)$(asound_module_ctl_arcam_avdir)/$$f'";
\
+ $(LIBTOOL) --mode=install
$(asound_module_ctl_arcam_avLTLIBRARIES_INSTALL)
$(INSTALL_STRIP_FLAG) "$$p" "$(DESTDIR)$(asound_module_ctl_arcam_avdir)/$$f";
\
+ else :; fi; \
+ done
+
+uninstall-asound_module_ctl_arcam_avLTLIBRARIES:
+ @$(NORMAL_UNINSTALL)
+ @set -x; list='$(asound_module_ctl_arcam_av_LTLIBRARIES)'; for p in $$list;
do \
+ p=$(am__strip_dir) \
+ echo " $(LIBTOOL) --mode=uninstall
rm -f '$(DESTDIR)$(asound_module_ctl_arcam_avdir)/$$p'"; \
+ $(LIBTOOL) --mode=uninstall
rm -f "$(DESTDIR)$(asound_module_ctl_arcam_avdir)/$$p"; \
+ done
+
+clean-asound_module_ctl_arcam_avLTLIBRARIES:
+ -test -z "$(asound_module_ctl_arcam_av_LTLIBRARIES)" || rm -f
$(asound_module_ctl_arcam_av_LTLIBRARIES)
+ @list='$(asound_module_ctl_arcam_av_LTLIBRARIES)'; for p in $$list; do \
+ dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
+ test "$$dir" != "$$p" || dir=.; \
+ echo "rm -f \"$${dir}/so_locations\""; \
+ rm -f "$${dir}/so_locations"; \
+ done
+libasound_module_ctl_arcam_av.la: $(libasound_module_ctl_arcam_av_la_OBJECTS)
$(libasound_module_ctl_arcam_av_la_DEPENDENCIES)
+ $(LINK) -rpath $(asound_module_ctl_arcam_avdir)
$(libasound_module_ctl_arcam_av_la_LDFLAGS)
$(libasound_module_ctl_arcam_av_la_OBJECTS)
$(libasound_module_ctl_arcam_av_la_LIBADD) $(LIBS)
+
+mostlyclean-compile:
+ -rm -f *.$(OBJEXT)
+
+distclean-compile:
+ -rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/arcam_av.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ctl_arcam_av.Plo@am__quote@
+
+.c.o:
+@am__fastdepCC_TRUE@ if $(COMPILE) -MT
$@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
+@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else
rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no
@AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp)
@AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(COMPILE) -c $<
+
+.c.obj:
+@am__fastdepCC_TRUE@ if $(COMPILE) -MT
$@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \
+@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else
rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no
@AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp)
@AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
+
+.c.lo:
+@am__fastdepCC_TRUE@ if $(LTCOMPILE) -MT
$@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
+@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Plo"; else
rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes
@AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp)
@AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $<
+
+mostlyclean-libtool:
+ -rm -f *.lo
+
+clean-libtool:
+ -rm -rf .libs _libs
+
+distclean-libtool:
+ -rm -f libtool
+uninstall-info-am:
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$tags $$unique; \
+ fi
+ctags: CTAGS
+CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$tags $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && cd $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+ list='$(DISTFILES)'; for file in $$list; do \
+ case $$file in \
+ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|
$(top_builddir)/|"`;; \
+ esac; \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+ dir="/$$dir"; \
+ $(mkdir_p) "$(distdir)$$dir"; \
+ else \
+ dir=''; \
+ fi; \
+ if test -d $$d/$$file; then \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ else \
+ test -f $(distdir)/$$file \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+check: check-am
+all-am: Makefile $(LTLIBRARIES)
+installdirs:
+ for dir in "$(DESTDIR)$(asound_module_ctl_arcam_avdir)"; do \
+ test -z "$$dir" || $(mkdir_p) "$$dir"; \
+ done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-asound_module_ctl_arcam_avLTLIBRARIES clean-generic \
+ clean-libtool mostlyclean-am
+
+distclean: distclean-am
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+ distclean-libtool distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+info: info-am
+
+info-am:
+
+install-data-am: install-asound_module_ctl_arcam_avLTLIBRARIES
+
+install-exec-am:
+
+install-info: install-info-am
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+ mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-asound_module_ctl_arcam_avLTLIBRARIES \
+ uninstall-info-am
+
+.PHONY: CTAGS GTAGS all all-am check check-am clean \
+ clean-asound_module_ctl_arcam_avLTLIBRARIES clean-generic \
+ clean-libtool ctags distclean distclean-compile \
+ distclean-generic distclean-libtool distclean-tags distdir dvi \
+ dvi-am html html-am info info-am install install-am \
+ install-asound_module_ctl_arcam_avLTLIBRARIES install-data \
+ install-data-am install-exec install-exec-am install-info \
+ install-info-am install-man install-strip installcheck \
+ installcheck-am installdirs maintainer-clean \
+ maintainer-clean-generic mostlyclean mostlyclean-compile \
+ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+ tags uninstall uninstall-am \
+ uninstall-asound_module_ctl_arcam_avLTLIBRARIES \
+ uninstall-info-am
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
next reply other threads:[~2009-01-03 20:56 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-01-03 20:56 Peter Stokes [this message]
2009-01-03 23:35 ` [PATCH 1/2] New Control Plugin - arcam-av Robin H. Johnson
2009-01-04 12:37 ` Peter Stokes
2009-01-04 14:16 ` Takashi Iwai
2009-01-04 21:13 ` Peter Stokes
2009-01-22 11:18 ` Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200901032056.35982.linux@dadeos.co.uk \
--to=linux@dadeos.co.uk \
--cc=alsa-devel@alsa-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.